@@ -1376,10 +1376,6 @@ static int cpsw_ndo_open(struct net_device *ndev)
ALE_ALL_PORTS, ALE_ALL_PORTS, 0, 0);
if (!cpsw_common_res_usage_state(cpsw)) {
- /* setup tx dma to fixed prio and zero offset */
- cpdma_control_set(cpsw->dma, CPDMA_TX_PRIO_FIXED, 1);
- cpdma_control_set(cpsw->dma, CPDMA_RX_BUFFER_OFFSET, 0);
-
/* disable priority elevation */
__raw_writel(0, &cpsw->regs->ptype);
@@ -124,6 +124,29 @@ struct cpdma_chan {
int int_set, int_clear, td;
};
+struct cpdma_control_info {
+ u32 reg;
+ u32 shift, mask;
+ int access;
+#define ACCESS_RO BIT(0)
+#define ACCESS_WO BIT(1)
+#define ACCESS_RW (ACCESS_RO | ACCESS_WO)
+};
+
+static struct cpdma_control_info controls[] = {
+ [CPDMA_CMD_IDLE] = {CPDMA_DMACONTROL, 3, 1, ACCESS_WO},
+ [CPDMA_COPY_ERROR_FRAMES] = {CPDMA_DMACONTROL, 4, 1, ACCESS_RW},
+ [CPDMA_RX_OFF_LEN_UPDATE] = {CPDMA_DMACONTROL, 2, 1, ACCESS_RW},
+ [CPDMA_RX_OWNERSHIP_FLIP] = {CPDMA_DMACONTROL, 1, 1, ACCESS_RW},
+ [CPDMA_TX_PRIO_FIXED] = {CPDMA_DMACONTROL, 0, 1, ACCESS_RW},
+ [CPDMA_STAT_IDLE] = {CPDMA_DMASTATUS, 31, 1, ACCESS_RO},
+ [CPDMA_STAT_TX_ERR_CODE] = {CPDMA_DMASTATUS, 20, 0xf, ACCESS_RW},
+ [CPDMA_STAT_TX_ERR_CHAN] = {CPDMA_DMASTATUS, 16, 0x7, ACCESS_RW},
+ [CPDMA_STAT_RX_ERR_CODE] = {CPDMA_DMASTATUS, 12, 0xf, ACCESS_RW},
+ [CPDMA_STAT_RX_ERR_CHAN] = {CPDMA_DMASTATUS, 8, 0x7, ACCESS_RW},
+ [CPDMA_RX_BUFFER_OFFSET] = {CPDMA_RXBUFFOFS, 0, 0xffff, ACCESS_RW},
+};
+
#define tx_chan_num(chan) (chan)
#define rx_chan_num(chan) ((chan) + CPDMA_MAX_CHANNELS)
#define is_rx_chan(chan) ((chan)->chan_num >= CPDMA_MAX_CHANNELS)
@@ -253,6 +276,31 @@ static void cpdma_desc_free(struct cpdma_desc_pool *pool,
gen_pool_free(pool->gen_pool, (unsigned long)desc, pool->desc_size);
}
+static int _cpdma_control_set(struct cpdma_ctlr *ctlr, int control, int value)
+{
+ struct cpdma_control_info *info = &controls[control];
+ u32 val;
+
+ if (!ctlr->params.has_ext_regs)
+ return -ENOTSUPP;
+
+ if (ctlr->state != CPDMA_STATE_ACTIVE)
+ return -EINVAL;
+
+ if (control < 0 || control >= ARRAY_SIZE(controls))
+ return -ENOENT;
+
+ if ((info->access & ACCESS_WO) != ACCESS_WO)
+ return -EPERM;
+
+ val = dma_reg_read(ctlr, info->reg);
+ val &= ~(info->mask << info->shift);
+ val |= (value & info->mask) << info->shift;
+ dma_reg_write(ctlr, info->reg, val);
+
+ return 0;
+}
+
struct cpdma_ctlr *cpdma_ctlr_create(struct cpdma_params *params)
{
struct cpdma_ctlr *ctlr;
@@ -324,6 +372,10 @@ int cpdma_ctlr_start(struct cpdma_ctlr *ctlr)
if (ctlr->channels[i])
cpdma_chan_start(ctlr->channels[i]);
}
+
+ _cpdma_control_set(ctlr, CPDMA_TX_PRIO_FIXED, 1);
+ _cpdma_control_set(ctlr, CPDMA_RX_BUFFER_OFFSET, 0);
+
spin_unlock_irqrestore(&ctlr->lock, flags);
return 0;
}
@@ -874,29 +926,6 @@ int cpdma_chan_int_ctrl(struct cpdma_chan *chan, bool enable)
return 0;
}
-struct cpdma_control_info {
- u32 reg;
- u32 shift, mask;
- int access;
-#define ACCESS_RO BIT(0)
-#define ACCESS_WO BIT(1)
-#define ACCESS_RW (ACCESS_RO | ACCESS_WO)
-};
-
-static struct cpdma_control_info controls[] = {
- [CPDMA_CMD_IDLE] = {CPDMA_DMACONTROL, 3, 1, ACCESS_WO},
- [CPDMA_COPY_ERROR_FRAMES] = {CPDMA_DMACONTROL, 4, 1, ACCESS_RW},
- [CPDMA_RX_OFF_LEN_UPDATE] = {CPDMA_DMACONTROL, 2, 1, ACCESS_RW},
- [CPDMA_RX_OWNERSHIP_FLIP] = {CPDMA_DMACONTROL, 1, 1, ACCESS_RW},
- [CPDMA_TX_PRIO_FIXED] = {CPDMA_DMACONTROL, 0, 1, ACCESS_RW},
- [CPDMA_STAT_IDLE] = {CPDMA_DMASTATUS, 31, 1, ACCESS_RO},
- [CPDMA_STAT_TX_ERR_CODE] = {CPDMA_DMASTATUS, 20, 0xf, ACCESS_RW},
- [CPDMA_STAT_TX_ERR_CHAN] = {CPDMA_DMASTATUS, 16, 0x7, ACCESS_RW},
- [CPDMA_STAT_RX_ERR_CODE] = {CPDMA_DMASTATUS, 12, 0xf, ACCESS_RW},
- [CPDMA_STAT_RX_ERR_CHAN] = {CPDMA_DMASTATUS, 8, 0x7, ACCESS_RW},
- [CPDMA_RX_BUFFER_OFFSET] = {CPDMA_RXBUFFOFS, 0, 0xffff, ACCESS_RW},
-};
-
int cpdma_control_get(struct cpdma_ctlr *ctlr, int control)
{
unsigned long flags;
@@ -931,35 +960,10 @@ int cpdma_control_get(struct cpdma_ctlr *ctlr, int control)
int cpdma_control_set(struct cpdma_ctlr *ctlr, int control, int value)
{
unsigned long flags;
- struct cpdma_control_info *info = &controls[control];
int ret;
- u32 val;
spin_lock_irqsave(&ctlr->lock, flags);
-
- ret = -ENOTSUPP;
- if (!ctlr->params.has_ext_regs)
- goto unlock_ret;
-
- ret = -EINVAL;
- if (ctlr->state != CPDMA_STATE_ACTIVE)
- goto unlock_ret;
-
- ret = -ENOENT;
- if (control < 0 || control >= ARRAY_SIZE(controls))
- goto unlock_ret;
-
- ret = -EPERM;
- if ((info->access & ACCESS_WO) != ACCESS_WO)
- goto unlock_ret;
-
- val = dma_reg_read(ctlr, info->reg);
- val &= ~(info->mask << info->shift);
- val |= (value & info->mask) << info->shift;
- dma_reg_write(ctlr, info->reg, val);
- ret = 0;
-
-unlock_ret:
+ ret = _cpdma_control_set(ctlr, control, value);
spin_unlock_irqrestore(&ctlr->lock, flags);
return ret;
}
The dma ctlr is reseted to 0 while cpdma soft reset, thus cpdma ctlr cannot be configured after cpdma is stopped. So restoring content of cpdma ctlr while off/on procedure is needed. The cpdma ctlr off/on procedure is present while interface down/up and while changing number of channels with ethtool. In order to not restore content in many places, move it to cpdma_ctlr_start(). Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> --- Based on net-next/master Since v1: - don't use redundant parameters for cpdma, make prio fixed to be constant drivers/net/ethernet/ti/cpsw.c | 4 -- drivers/net/ethernet/ti/davinci_cpdma.c | 102 +++++++++++++++++--------------- 2 files changed, 53 insertions(+), 53 deletions(-)