[v10,01/11] remoteproc: st_slim_rproc: add a slimcore rproc driver

Message ID	1476783556-2501-2-git-send-email-peter.griffin@linaro.org (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Peter Griffin <peter.griffin@linaro.org> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@stlinux.com, vinod.koul@intel.com, ohad@wizery.com, bjorn.andersson@linaro.org, patrice.chotard@st.com Subject: [PATCH v10 01/11] remoteproc: st_slim_rproc: add a slimcore rproc driver Date: Tue, 18 Oct 2016 10:39:06 +0100 Message-Id: <1476783556-2501-2-git-send-email-peter.griffin@linaro.org> In-Reply-To: <1476783556-2501-1-git-send-email-peter.griffin@linaro.org> References: <1476783556-2501-1-git-send-email-peter.griffin@linaro.org> Precedence: list Cc: peter.griffin@linaro.org, dmaengine@vger.kernel.org, linux-remoteproc@vger.kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index f396bfe..9270c8e 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -58,7 +58,6 @@ config DA8XX_REMOTEPROC tristate "DA8xx/OMAP-L13x remoteproc support" depends on ARCH_DAVINCI_DA8XX select CMA if MMU - select REMOTEPROC select RPMSG_VIRTIO help Say y here to support DA8xx/OMAP-L13x remote processors via the @@ -99,10 +98,10 @@ config QCOM_WCNSS_PIL tristate "Qualcomm WCNSS Peripheral Image Loader" depends on OF && ARCH_QCOM depends on QCOM_SMEM + depends on REMOTEPROC select QCOM_MDT_LOADER select QCOM_SCM select QCOM_WCNSS_IRIS - select REMOTEPROC help Say y here to support the Peripheral Image Loader for the Qualcomm Wireless Connectivity Subsystem. @@ -116,4 +115,8 @@ config ST_REMOTEPROC processor framework. This can be either built-in or a loadable module. +config ST_SLIM_REMOTEPROC + tristate + select REMOTEPROC + endmenu diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 6dfb62e..924f0cb 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o obj-$(CONFIG_QCOM_WCNSS_IRIS) += qcom_wcnss_iris.o obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss.o obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o +obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c new file mode 100644 index 0000000..1484e97 --- /dev/null +++ b/drivers/remoteproc/st_slim_rproc.c @@ -0,0 +1,364 @@ +/* + * SLIM core rproc driver + * + * Copyright (C) 2016 STMicroelectronics + * + * Author: Peter Griffin <peter.griffin@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/remoteproc.h> +#include <linux/remoteproc/st_slim_rproc.h> +#include "remoteproc_internal.h" + +/* SLIM core registers */ +#define SLIM_ID_OFST 0x0 +#define SLIM_VER_OFST 0x4 + +#define SLIM_EN_OFST 0x8 +#define SLIM_EN_RUN BIT(0) + +#define SLIM_CLK_GATE_OFST 0xC +#define SLIM_CLK_GATE_DIS BIT(0) +#define SLIM_CLK_GATE_RESET BIT(2) + +#define SLIM_SLIM_PC_OFST 0x20 + +/* DMEM registers */ +#define SLIM_REV_ID_OFST 0x0 +#define SLIM_REV_ID_MIN_MASK GENMASK(15, 8) +#define SLIM_REV_ID_MIN(id) ((id & SLIM_REV_ID_MIN_MASK) >> 8) +#define SLIM_REV_ID_MAJ_MASK GENMASK(23, 16) +#define SLIM_REV_ID_MAJ(id) ((id & SLIM_REV_ID_MAJ_MASK) >> 16) + + +/* peripherals registers */ +#define SLIM_STBUS_SYNC_OFST 0xF88 +#define SLIM_STBUS_SYNC_DIS BIT(0) + +#define SLIM_INT_SET_OFST 0xFD4 +#define SLIM_INT_CLR_OFST 0xFD8 +#define SLIM_INT_MASK_OFST 0xFDC + +#define SLIM_CMD_CLR_OFST 0xFC8 +#define SLIM_CMD_MASK_OFST 0xFCC + +static const char *mem_names[ST_SLIM_MEM_MAX] = { + [ST_SLIM_DMEM] = "dmem", + [ST_SLIM_IMEM] = "imem", +}; + +static int slim_clk_get(struct st_slim_rproc *slim_rproc, struct device *dev) +{ + int clk, err; + + for (clk = 0; clk < ST_SLIM_MAX_CLK; clk++) { + slim_rproc->clks[clk] = of_clk_get(dev->of_node, clk); + if (IS_ERR(slim_rproc->clks[clk])) { + err = PTR_ERR(slim_rproc->clks[clk]); + if (err == -EPROBE_DEFER) + goto err_put_clks; + slim_rproc->clks[clk] = NULL; + break; + } + } + + return 0; + +err_put_clks: + while (--clk >= 0) + clk_put(slim_rproc->clks[clk]); + + return err; +} + +static void slim_clk_disable(struct st_slim_rproc *slim_rproc) +{ + int clk; + + for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) + clk_disable_unprepare(slim_rproc->clks[clk]); +} + +static int slim_clk_enable(struct st_slim_rproc *slim_rproc) +{ + int clk, ret; + + for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) { + ret = clk_prepare_enable(slim_rproc->clks[clk]); + if (ret) + goto err_disable_clks; + } + + return 0; + +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(slim_rproc->clks[clk]); + + return ret; +} + +/* + * Remoteproc slim specific device handlers + */ +static int slim_rproc_start(struct rproc *rproc) +{ + struct device *dev = &rproc->dev; + struct st_slim_rproc *slim_rproc = rproc->priv; + unsigned long hw_id, hw_ver, fw_rev; + u32 val; + + /* disable CPU pipeline clock & reset CPU pipeline */ + val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET; + writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); + + /* disable SLIM core STBus sync */ + writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST); + + /* enable cpu pipeline clock */ + writel(!SLIM_CLK_GATE_DIS, + slim_rproc->slimcore + SLIM_CLK_GATE_OFST); + + /* clear int & cmd mailbox */ + writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST); + writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST); + + /* enable all channels cmd & int */ + writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST); + writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST); + + /* enable cpu */ + writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST); + + hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST); + hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST); + + fw_rev = readl(slim_rproc->mem[ST_SLIM_DMEM].cpu_addr + + SLIM_REV_ID_OFST); + + dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n", + SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev), + hw_id, hw_ver); + + return 0; +} + +static int slim_rproc_stop(struct rproc *rproc) +{ + struct st_slim_rproc *slim_rproc = rproc->priv; + u32 val; + + /* mask all (cmd & int) channels */ + writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST); + writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST); + + /* disable cpu pipeline clock */ + writel(SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); + + writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST); + + val = readl(slim_rproc->slimcore + SLIM_EN_OFST); + if (val & SLIM_EN_RUN) + dev_warn(&rproc->dev, "Failed to disable SLIM"); + + dev_dbg(&rproc->dev, "slim stopped\n"); + + return 0; +} + +static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len) +{ + struct st_slim_rproc *slim_rproc = rproc->priv; + void *va = NULL; + int i; + + for (i = 0; i < ST_SLIM_MEM_MAX; i++) { + if (da != slim_rproc->mem[i].bus_addr) + continue; + + if (len <= slim_rproc->mem[i].size) { + /* __force to make sparse happy with type conversion */ + va = (__force void *)slim_rproc->mem[i].cpu_addr; + break; + } + } + + dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%p\n", da, len, va); + + return va; +} + +static struct rproc_ops slim_rproc_ops = { + .start = slim_rproc_start, + .stop = slim_rproc_stop, + .da_to_va = slim_rproc_da_to_va, +}; + +/* + * Firmware handler operations: sanity, boot address, load ... + */ + +static struct resource_table empty_rsc_tbl = { + .ver = 1, + .num = 0, +}; + +static struct resource_table *slim_rproc_find_rsc_table(struct rproc *rproc, + const struct firmware *fw, + int *tablesz) +{ + *tablesz = sizeof(empty_rsc_tbl); + return &empty_rsc_tbl; +} + +static struct rproc_fw_ops slim_rproc_fw_ops = { + .find_rsc_table = slim_rproc_find_rsc_table, +}; + +/** + * st_slim_rproc_alloc() - allocate and initialise slim rproc + * @pdev: Pointer to the platform_device struct + * @fw_name: Name of firmware for rproc to use + * + * Function for allocating and initialising a slim rproc for use by + * device drivers whose IP is based around the SLIM core. It + * obtains and enables any clocks required by the SLIM core and also + * ioremaps the various IO. + * + * Returns st_slim_rproc pointer or PTR_ERR() on error. + */ + +struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev, + char *fw_name) +{ + struct device *dev = &pdev->dev; + struct st_slim_rproc *slim_rproc; + struct device_node *np = dev->of_node; + struct rproc *rproc; + struct resource *res; + int err, i; + const struct rproc_fw_ops *elf_ops; + + if (!fw_name) + return ERR_PTR(-EINVAL); + + if (!of_device_is_compatible(np, "st,slim-rproc")) + return ERR_PTR(-EINVAL); + + rproc = rproc_alloc(dev, np->name, &slim_rproc_ops, + fw_name, sizeof(*slim_rproc)); + if (!rproc) + return ERR_PTR(-ENOMEM); + + rproc->has_iommu = false; + + slim_rproc = rproc->priv; + slim_rproc->rproc = rproc; + + elf_ops = rproc->fw_ops; + /* Use some generic elf ops */ + slim_rproc_fw_ops.load = elf_ops->load; + slim_rproc_fw_ops.sanity_check = elf_ops->sanity_check; + + rproc->fw_ops = &slim_rproc_fw_ops; + + /* get imem and dmem */ + for (i = 0; i < ARRAY_SIZE(mem_names); i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + mem_names[i]); + + slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(slim_rproc->mem[i].cpu_addr)) { + dev_err(&pdev->dev, "devm_ioremap_resource failed\n"); + err = PTR_ERR(slim_rproc->mem[i].cpu_addr); + goto err; + } + slim_rproc->mem[i].bus_addr = res->start; + slim_rproc->mem[i].size = resource_size(res); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "slimcore"); + slim_rproc->slimcore = devm_ioremap_resource(dev, res); + if (IS_ERR(slim_rproc->slimcore)) { + dev_err(&pdev->dev, "failed to ioremap slimcore IO\n"); + err = PTR_ERR(slim_rproc->slimcore); + goto err; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "peripherals"); + slim_rproc->peri = devm_ioremap_resource(dev, res); + if (IS_ERR(slim_rproc->peri)) { + dev_err(&pdev->dev, "failed to ioremap peripherals IO\n"); + err = PTR_ERR(slim_rproc->peri); + goto err; + } + + err = slim_clk_get(slim_rproc, dev); + if (err) + goto err; + + err = slim_clk_enable(slim_rproc); + if (err) { + dev_err(dev, "Failed to enable clocks\n"); + goto err_clk_put; + } + + /* Register as a remoteproc device */ + err = rproc_add(rproc); + if (err) { + dev_err(dev, "registration of slim remoteproc failed\n"); + goto err_clk_dis; + } + + return slim_rproc; + +err_clk_dis: + slim_clk_disable(slim_rproc); +err_clk_put: + for (i = 0; i < ST_SLIM_MAX_CLK && slim_rproc->clks[i]; i++) + clk_put(slim_rproc->clks[i]); +err: + rproc_put(rproc); + return ERR_PTR(err); +} +EXPORT_SYMBOL(st_slim_rproc_alloc); + +/** + * st_slim_rproc_put() - put slim rproc resources + * @slim_rproc: Pointer to the st_slim_rproc struct + * + * Function for calling respective _put() functions on slim_rproc resources. + * + */ +void st_slim_rproc_put(struct st_slim_rproc *slim_rproc) +{ + int clk; + + if (!slim_rproc) + return; + + slim_clk_disable(slim_rproc); + + for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) + clk_put(slim_rproc->clks[clk]); + + rproc_del(slim_rproc->rproc); + rproc_put(slim_rproc->rproc); +} +EXPORT_SYMBOL(st_slim_rproc_put); + +MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); +MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/remoteproc/st_slim_rproc.h b/include/linux/remoteproc/st_slim_rproc.h new file mode 100644 index 0000000..4155556 --- /dev/null +++ b/include/linux/remoteproc/st_slim_rproc.h @@ -0,0 +1,58 @@ +/* + * SLIM core rproc driver header + * + * Copyright (C) 2016 STMicroelectronics + * + * Author: Peter Griffin <peter.griffin@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef _ST_REMOTEPROC_SLIM_H +#define _ST_REMOTEPROC_SLIM_H + +#define ST_SLIM_MEM_MAX 2 +#define ST_SLIM_MAX_CLK 4 + +enum { + ST_SLIM_DMEM, + ST_SLIM_IMEM, +}; + +/** + * struct st_slim_mem - slim internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: Bus address used to access the memory region + * @size: Size of the memory region + */ +struct st_slim_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + size_t size; +}; + +/** + * struct st_slim_rproc - SLIM slim core + * @rproc: rproc handle + * @mem: slim memory information + * @slimcore: slim slimcore regs + * @peri: slim peripheral regs + * @clks: slim clocks + */ +struct st_slim_rproc { + struct rproc *rproc; + struct st_slim_mem mem[ST_SLIM_MEM_MAX]; + void __iomem *slimcore; + void __iomem *peri; + + /* st_slim_rproc private */ + struct clk *clks[ST_SLIM_MAX_CLK]; +}; + +struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev, + char *fw_name); +void st_slim_rproc_put(struct st_slim_rproc *slim_rproc); + +#endif

[v10,01/11] remoteproc: st_slim_rproc: add a slimcore rproc driver

Commit Message

Comments

Patch