diff mbox

[2/2] clk: uniphier: add clock data for cpufreq

Message ID 1477503088-26508-2-git-send-email-yamada.masahiro@socionext.com (mailing list archive)
State New, archived
Headers show

Commit Message

Masahiro Yamada Oct. 26, 2016, 5:31 p.m. UTC 
Data needed for CPU-gear change (cpufreq).

Note:
At this moment, some clock data for Pro5/Pxs2 (32bit SoCs) are
a bit faked because clock rates greater than LONG_MAX (~2.15 GHz)
must be avoided on 32 bit systems.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

I raised a flag in the following post:
https://www.spinics.net/lists/kernel/msg2361374.html

I have not had any comments.
Anyway, I am moving forward.
I can fix the data arrays to reflect the real
clock topology.


 drivers/clk/uniphier/clk-uniphier-sys.c | 111 ++++++++++++++++++++++++++++++++
 drivers/clk/uniphier/clk-uniphier.h     |  35 +++++++++-
 2 files changed, 145 insertions(+), 1 deletion(-)

Comments

Stephen Boyd Nov. 24, 2016, 12:05 a.m. UTC | #1 
On 10/27, Masahiro Yamada wrote:
> Data needed for CPU-gear change (cpufreq).
> 
> Note:
> At this moment, some clock data for Pro5/Pxs2 (32bit SoCs) are
> a bit faked because clock rates greater than LONG_MAX (~2.15 GHz)
> must be avoided on 32 bit systems.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---
> 
> I raised a flag in the following post:
> https://www.spinics.net/lists/kernel/msg2361374.html
> 
> I have not had any comments.
> Anyway, I am moving forward.
> I can fix the data arrays to reflect the real
> clock topology.
> 
> 
>  drivers/clk/uniphier/clk-uniphier-sys.c | 111 ++++++++++++++++++++++++++++++++
>  drivers/clk/uniphier/clk-uniphier.h     |  35 +++++++++-
>  2 files changed, 145 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
> index 5d02999..74ab179 100644
> --- a/drivers/clk/uniphier/clk-uniphier-sys.c
> +++ b/drivers/clk/uniphier/clk-uniphier-sys.c
> @@ -41,6 +41,19 @@
>  #define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch)				\
>  	UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
>  
> +#define UNIPHIER_PRO5_SYS_CPUGEARS					\
> +	UNIPHIER_CLK_DIV8("cpll", 2, 3, 4, 6, 8, 12, 16, 24),		\
> +	UNIPHIER_CLK_DIV8("spll", 2, 3, 4, 6, 8, 12, 16, 24),		\
> +	UNIPHIER_CLK_DIV8("ippll", 2, 3, 4, 6, 8, 12, 16, 24),		\
> +	UNIPHIER_CLK_CPUGEAR("cpu-ca9", 32, 0x8000, 0x1f, 16,		\
> +			     "cpll/2", "spll/2", "cpll/3", "spll/3",	\
> +			     "cpll/4", "spll/4", "cpll/6", "spll/6",	\
> +			     "cpll/8", "spll/8", "cpll/12", "spll/12",	\
> +			     "cpll/16", "spll/16", "cpll/24", "spll/24"),\
> +	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,		\
> +			     "ippll/2", "spll/2", "ippll/3", "spll/3",	\
> +			     "spll/4", "spll/8", "ippll/4", "ippll/8")
> +
>  const struct uniphier_clk_data uniphier_sld3_sys_clk_data[] = {
>  	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1),		/* 1597.44 MHz */
>  	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512),	/* 288 MHz */
> @@ -96,6 +109,8 @@
>  };
>  
>  const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
> +	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 140, 1),		/* 2800 MHz */
> +	UNIPHIER_CLK_FACTOR("ippll", -1, "ref", 130, 1),	/* 2600 MHz */
>  	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 120, 1),		/* 2400 MHz */
>  	UNIPHIER_CLK_FACTOR("dapll1", -1, "ref", 128, 1),	/* 2560 MHz */
>  	UNIPHIER_CLK_FACTOR("dapll2", -1, "ref", 144, 125),	/* 2949.12 MHz */
> @@ -106,10 +121,43 @@
>  	UNIPHIER_PRO4_SYS_CLK_GIO(12),				/* PCIe, USB3 */
>  	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
>  	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
> +#if 1
> +	/*
> +	 * TODO:
> +	 * The return type of .round_rate() is "long", which is 32 bit wide on
> +	 * 32 bit systems.  Clock rate greater than LONG_MAX (~ 2.15 GHz) is
> +	 * treated as an error.  Needs a workaround until the problem is fixed.
> +	 */

Just curious is the problem internal to the clk framework because
of the clk_ops::round_rate design? Or does the consumer, cpufreq
in this case, have to deal with rates that are larger than
unsigned long on a 32 bit system? If it's just a clk_ops problem
and we need to support rates up to 32 bits wide (~ 4.3 GHz) on
the system then the driver could be changed to use
.determine_rate() ops and that would allow us to use all the bits
of unsigned long to figure out rates.

If the problem is rates even larger than unsigned long on 32 bit
systems, then at the least I'd like to see some sort of plan to
fix that in the framework before merging code. Hopefully it can
be done gradually, but as I start looking at it it seems more and
more complicated to support this so this will be a long term
project.

We can discuss the clk API changes needed as well if those are
required, but that is another issue that requires changes in
other places outside of clk drivers.
Masahiro Yamada Nov. 24, 2016, 12:57 a.m. UTC | #2 
Hi Stephen,


2016-11-24 9:05 GMT+09:00 Stephen Boyd <sboyd@codeaurora.org>:

>> +#if 1
>> +     /*
>> +      * TODO:
>> +      * The return type of .round_rate() is "long", which is 32 bit wide on
>> +      * 32 bit systems.  Clock rate greater than LONG_MAX (~ 2.15 GHz) is
>> +      * treated as an error.  Needs a workaround until the problem is fixed.
>> +      */
>
> Just curious is the problem internal to the clk framework because
> of the clk_ops::round_rate design? Or does the consumer, cpufreq
> in this case, have to deal with rates that are larger than
> unsigned long on a 32 bit system? If it's just a clk_ops problem
> and we need to support rates up to 32 bits wide (~ 4.3 GHz) on
> the system then the driver could be changed to use
> .determine_rate() ops and that would allow us to use all the bits
> of unsigned long to figure out rates.
>
> If the problem is rates even larger than unsigned long on 32 bit
> systems, then at the least I'd like to see some sort of plan to
> fix that in the framework before merging code. Hopefully it can
> be done gradually, but as I start looking at it it seems more and
> more complicated to support this so this will be a long term
> project.
>
> We can discuss the clk API changes needed as well if those are
> required, but that is another issue that requires changes in
> other places outside of clk drivers.
>

I understand your point, but core frame-work changes
need more careful review than clk data changes in low-level drivers.
It is too late to be included in v4.10.

If I drop 32bit SoC things, and send v2 only for 64bit SoCs,
is that acceptable for 4.10-rc1?

Our ARMv8 SoCs are more actively developed, so
getting 64bit clk data in first will be helpful.

I postpone the 32bit SoC data until
I figure out the root cause of the problem
(and possible change for the API if necessary).
Stephen Boyd Nov. 24, 2016, 2:10 a.m. UTC | #3 
On 11/24, Masahiro Yamada wrote:
> Hi Stephen,
> 
> 
> 2016-11-24 9:05 GMT+09:00 Stephen Boyd <sboyd@codeaurora.org>:
> 
> >> +#if 1
> >> +     /*
> >> +      * TODO:
> >> +      * The return type of .round_rate() is "long", which is 32 bit wide on
> >> +      * 32 bit systems.  Clock rate greater than LONG_MAX (~ 2.15 GHz) is
> >> +      * treated as an error.  Needs a workaround until the problem is fixed.
> >> +      */
> >
> > Just curious is the problem internal to the clk framework because
> > of the clk_ops::round_rate design? Or does the consumer, cpufreq
> > in this case, have to deal with rates that are larger than
> > unsigned long on a 32 bit system? If it's just a clk_ops problem
> > and we need to support rates up to 32 bits wide (~ 4.3 GHz) on
> > the system then the driver could be changed to use
> > .determine_rate() ops and that would allow us to use all the bits
> > of unsigned long to figure out rates.
> >
> > If the problem is rates even larger than unsigned long on 32 bit
> > systems, then at the least I'd like to see some sort of plan to
> > fix that in the framework before merging code. Hopefully it can
> > be done gradually, but as I start looking at it it seems more and
> > more complicated to support this so this will be a long term
> > project.
> >
> > We can discuss the clk API changes needed as well if those are
> > required, but that is another issue that requires changes in
> > other places outside of clk drivers.
> >
> 
> I understand your point, but core frame-work changes
> need more careful review than clk data changes in low-level drivers.
> It is too late to be included in v4.10.
> 
> If I drop 32bit SoC things, and send v2 only for 64bit SoCs,
> is that acceptable for 4.10-rc1?

Sure. That sounds fine for now. I'll reply to your other thread
with a plan of attack on how to do the framework changes. I think
we need to do those regardless of the outcome of your
investigation.
Masahiro Yamada Nov. 25, 2016, 11:55 a.m. UTC | #4 
Hi Stephen,


2016-11-24 11:10 GMT+09:00 Stephen Boyd <sboyd@codeaurora.org>:

>> If I drop 32bit SoC things, and send v2 only for 64bit SoCs,
>> is that acceptable for 4.10-rc1?
>
> Sure. That sounds fine for now. I'll reply to your other thread
> with a plan of attack on how to do the framework changes. I think
> we need to do those regardless of the outcome of your
> investigation.

I posted v2 yesterday.
diff mbox

Patch

diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index 5d02999..74ab179 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -41,6 +41,19 @@ 
 #define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch)				\
 	UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
 
+#define UNIPHIER_PRO5_SYS_CPUGEARS					\
+	UNIPHIER_CLK_DIV8("cpll", 2, 3, 4, 6, 8, 12, 16, 24),		\
+	UNIPHIER_CLK_DIV8("spll", 2, 3, 4, 6, 8, 12, 16, 24),		\
+	UNIPHIER_CLK_DIV8("ippll", 2, 3, 4, 6, 8, 12, 16, 24),		\
+	UNIPHIER_CLK_CPUGEAR("cpu-ca9", 32, 0x8000, 0x1f, 16,		\
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",	\
+			     "cpll/4", "spll/4", "cpll/6", "spll/6",	\
+			     "cpll/8", "spll/8", "cpll/12", "spll/12",	\
+			     "cpll/16", "spll/16", "cpll/24", "spll/24"),\
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,		\
+			     "ippll/2", "spll/2", "ippll/3", "spll/3",	\
+			     "spll/4", "spll/8", "ippll/4", "ippll/8")
+
 const struct uniphier_clk_data uniphier_sld3_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1),		/* 1597.44 MHz */
 	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512),	/* 288 MHz */
@@ -96,6 +109,8 @@ 
 };
 
 const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 140, 1),		/* 2800 MHz */
+	UNIPHIER_CLK_FACTOR("ippll", -1, "ref", 130, 1),	/* 2600 MHz */
 	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 120, 1),		/* 2400 MHz */
 	UNIPHIER_CLK_FACTOR("dapll1", -1, "ref", 128, 1),	/* 2560 MHz */
 	UNIPHIER_CLK_FACTOR("dapll2", -1, "ref", 144, 125),	/* 2949.12 MHz */
@@ -106,10 +121,43 @@ 
 	UNIPHIER_PRO4_SYS_CLK_GIO(12),				/* PCIe, USB3 */
 	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+#if 1
+	/*
+	 * TODO:
+	 * The return type of .round_rate() is "long", which is 32 bit wide on
+	 * 32 bit systems.  Clock rate greater than LONG_MAX (~ 2.15 GHz) is
+	 * treated as an error.  Needs a workaround until the problem is fixed.
+	 */
+	UNIPHIER_CLK_FACTOR("cpll/2", -1, "ref", 70, 1),
+	UNIPHIER_CLK_FACTOR("cpll/3", -1, "ref", 140, 3),
+	UNIPHIER_CLK_FACTOR("cpll/4", -1, "ref", 35, 1),
+	UNIPHIER_CLK_FACTOR("cpll/6", -1, "ref", 70, 3),
+	UNIPHIER_CLK_FACTOR("cpll/8", -1, "ref", 35, 2),
+	UNIPHIER_CLK_FACTOR("cpll/12", -1, "ref", 35, 3),
+	UNIPHIER_CLK_FACTOR("cpll/16", -1, "ref", 35, 4),
+	UNIPHIER_CLK_FACTOR("cpll/24", -1, "ref", 35, 6),
+	UNIPHIER_CLK_FACTOR("spll/2", -1, "ref", 60, 1),
+	UNIPHIER_CLK_FACTOR("spll/3", -1, "ref", 40, 1),
+	UNIPHIER_CLK_FACTOR("spll/4", -1, "ref", 30, 1),
+	UNIPHIER_CLK_FACTOR("spll/6", -1, "ref", 20, 1),
+	UNIPHIER_CLK_FACTOR("spll/8", -1, "ref", 15, 1),
+	UNIPHIER_CLK_FACTOR("spll/12", -1, "ref", 10, 1),
+	UNIPHIER_CLK_FACTOR("spll/16", -1, "ref", 15, 2),
+	UNIPHIER_CLK_FACTOR("spll/24", -1, "ref", 5, 1),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca9", 32, 0x8000, 0x1f, 16,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "cpll/4", "spll/4", "cpll/6", "spll/6",
+			     "cpll/8", "spll/8", "cpll/12", "spll/12",
+			     "cpll/16", "spll/16", "cpll/24", "spll/24"),
+#else
+	UNIPHIER_PRO5_SYS_CPUGEARS,
+#endif
 	{ /* sentinel */ }
 };
 
 const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 96, 1),		/* 2400 MHz */
+	UNIPHIER_CLK_FACTOR("ippll", -1, "ref", 96, 1),		/* 2400 MHz */
 	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 96, 1),		/* 2400 MHz */
 	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 27),
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
@@ -121,20 +169,70 @@ 
 	/* The document mentions 0x2104 bit 18, but not functional */
 	UNIPHIER_CLK_GATE("usb30-phy", 16, NULL, 0x2104, 19),
 	UNIPHIER_CLK_GATE("usb31-phy", 20, NULL, 0x2104, 20),
+#if 1
+	/*
+	 * TODO:
+	 * The return type of .round_rate() is "long", which is 32 bit wide on
+	 * 32 bit systems.  Clock rate greater than LONG_MAX (~ 2.15 GHz) is
+	 * treated as an error.  Needs a workaround until the problem is fixed.
+	 */
+	UNIPHIER_CLK_FACTOR("cpll/2", -1, "ref", 48, 1),
+	UNIPHIER_CLK_FACTOR("cpll/3", -1, "ref", 32, 1),
+	UNIPHIER_CLK_FACTOR("cpll/4", -1, "ref", 24, 1),
+	UNIPHIER_CLK_FACTOR("cpll/6", -1, "ref", 16, 1),
+	UNIPHIER_CLK_FACTOR("cpll/8", -1, "ref", 12, 1),
+	UNIPHIER_CLK_FACTOR("cpll/12", -1, "ref", 8, 1),
+	UNIPHIER_CLK_FACTOR("cpll/16", -1, "ref", 6, 1),
+	UNIPHIER_CLK_FACTOR("cpll/24", -1, "ref", 4, 1),
+	UNIPHIER_CLK_FACTOR("spll/2", -1, "ref", 48, 1),
+	UNIPHIER_CLK_FACTOR("spll/3", -1, "ref", 32, 1),
+	UNIPHIER_CLK_FACTOR("spll/4", -1, "ref", 24, 1),
+	UNIPHIER_CLK_FACTOR("spll/6", -1, "ref", 16, 1),
+	UNIPHIER_CLK_FACTOR("spll/8", -1, "ref", 12, 1),
+	UNIPHIER_CLK_FACTOR("spll/12", -1, "ref", 8, 1),
+	UNIPHIER_CLK_FACTOR("spll/16", -1, "ref", 6, 1),
+	UNIPHIER_CLK_FACTOR("spll/24", -1, "ref", 4, 1),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca9", 32, 0x8000, 0x1f, 16,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "cpll/4", "spll/4", "cpll/6", "spll/6",
+			     "cpll/8", "spll/8", "cpll/12", "spll/12",
+			     "cpll/16", "spll/16", "cpll/24", "spll/24"),
+#else
+	UNIPHIER_PRO5_SYS_CPUGEARS,
+#endif
 	{ /* sentinel */ }
 };
 
 const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 392, 5),		/* 1960 MHz */
+	UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1),		/* 1600 MHz */
 	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("vspll", -1, "ref", 80, 1),		/* 2000 MHz */
 	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
 	UNIPHIER_LD11_SYS_CLK_STDMAC(8),			/* HSC, MIO */
 	UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("mpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV3("spll", 3, 4, 8),
+	/* Note: both gear1 and gear4 are spll/4.  This is not a bug. */
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/4", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "mpll/2", "spll/4", "mpll/3", "spll/3",
+			     "spll/4", "spll/8", "mpll/4", "mpll/8"),
 	{ /* sentinel */ }
 };
 
 const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 88, 1),		/* ARM: 2200 MHz */
+	UNIPHIER_CLK_FACTOR("gppll", -1, "ref", 52, 1),		/* Mali: 1300 MHz */
+	UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1),		/* Codec: 1600 MHz */
 	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1),		/* IPP: 2200 MHz */
+	UNIPHIER_CLK_FACTOR("vppll", -1, "ref", 504, 5),	/* 2520 MHz */
 	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
 	UNIPHIER_LD20_SYS_CLK_SD,
@@ -147,5 +245,18 @@ 
 	UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
 	UNIPHIER_CLK_GATE("usb30-phy0", 16, NULL, 0x210c, 12),
 	UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 13),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca72", 32, 0x8000, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "s2pll/2", "spll/2", "s2pll/3", "spll/3",
+			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
 	{ /* sentinel */ }
 };
diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h
index 9707b0f..849824a 100644
--- a/drivers/clk/uniphier/clk-uniphier.h
+++ b/drivers/clk/uniphier/clk-uniphier.h
@@ -75,6 +75,20 @@  struct uniphier_clk_data {
 	} data;
 };
 
+#define UNIPHIER_CLK_CPUGEAR(_name, _idx, _regbase, _mask,	\
+			     _num_parents, ...)			\
+	{							\
+		.name = (_name),				\
+		.type = UNIPHIER_CLK_TYPE_CPUGEAR,		\
+		.idx = (_idx),					\
+		.data.cpugear = {				\
+			.parent_names = { __VA_ARGS__ },	\
+			.num_parents = (_num_parents),		\
+			.regbase = (_regbase),			\
+			.mask = (_mask)				\
+		 },						\
+	}
+
 #define UNIPHIER_CLK_FACTOR(_name, _idx, _parent, _mult, _div)	\
 	{							\
 		.name = (_name),				\
@@ -87,7 +101,6 @@  struct uniphier_clk_data {
 		},						\
 	}
 
-
 #define UNIPHIER_CLK_GATE(_name, _idx, _parent, _reg, _bit)	\
 	{							\
 		.name = (_name),				\
@@ -100,6 +113,26 @@  struct uniphier_clk_data {
 		},						\
 	}
 
+#define UNIPHIER_CLK_DIV(parent, div)				\
+	UNIPHIER_CLK_FACTOR(parent "/" #div, -1, parent, 1, div)
+
+#define UNIPHIER_CLK_DIV2(parent, div0, div1)			\
+	UNIPHIER_CLK_DIV(parent, div0),				\
+	UNIPHIER_CLK_DIV(parent, div1)
+
+#define UNIPHIER_CLK_DIV3(parent, div0, div1, div2)		\
+	UNIPHIER_CLK_DIV2(parent, div0, div1),			\
+	UNIPHIER_CLK_DIV(parent, div2)
+
+#define UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3)	\
+	UNIPHIER_CLK_DIV2(parent, div0, div1),			\
+	UNIPHIER_CLK_DIV2(parent, div2, div3)
+
+#define UNIPHIER_CLK_DIV8(parent, div0, div1, div2, div3,	\
+			  div4, div5, div6, div7)		\
+	UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3),	\
+	UNIPHIER_CLK_DIV4(parent, div4, div5, div6, div7)
+
 struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
 					     struct regmap *regmap,
 					     const char *name,