@@ -3,7 +3,7 @@
#
obj-$(CONFIG_TCG_TPM) += tpm.o
tpm-y := tpm-interface.o tpm-dev.o tpm-sysfs.o tpm-chip.o tpm2-cmd.o \
- tpm_eventlog.o
+ tpm_eventlog.o tpm_eventlog_init.o
tpm-$(CONFIG_ACPI) += tpm_ppi.o tpm_acpi.o
tpm-$(CONFIG_OF) += tpm_of.o
obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o
@@ -11,7 +11,8 @@
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
- * Access to the event log created by a system's firmware / BIOS
+ * Access to the TPM 1.2 event log created by a system's
+ * firmware / BIOS
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -260,17 +261,6 @@ static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v)
}
-static int tpm_bios_measurements_release(struct inode *inode,
- struct file *file)
-{
- struct seq_file *seq = (struct seq_file *)file->private_data;
- struct tpm_chip *chip = (struct tpm_chip *)seq->private;
-
- put_device(&chip->dev);
-
- return seq_release(inode, file);
-}
-
static int tpm_ascii_bios_measurements_show(struct seq_file *m, void *v)
{
int len = 0;
@@ -304,163 +294,16 @@ static int tpm_ascii_bios_measurements_show(struct seq_file *m, void *v)
return 0;
}
-static const struct seq_operations tpm_ascii_b_measurements_seqops = {
+const struct seq_operations tpm_ascii_b_measurements_seqops = {
.start = tpm_bios_measurements_start,
.next = tpm_bios_measurements_next,
.stop = tpm_bios_measurements_stop,
.show = tpm_ascii_bios_measurements_show,
};
-static const struct seq_operations tpm_binary_b_measurements_seqops = {
+const struct seq_operations tpm_binary_b_measurements_seqops = {
.start = tpm_bios_measurements_start,
.next = tpm_bios_measurements_next,
.stop = tpm_bios_measurements_stop,
.show = tpm_binary_bios_measurements_show,
};
-
-static int tpm_bios_measurements_open(struct inode *inode,
- struct file *file)
-{
- int err;
- struct seq_file *seq;
- struct tpm_chip_seqops *chip_seqops;
- const struct seq_operations *seqops;
- struct tpm_chip *chip;
-
- inode_lock(inode);
- if (!inode->i_private) {
- inode_unlock(inode);
- return -ENODEV;
- }
- chip_seqops = (struct tpm_chip_seqops *)inode->i_private;
- seqops = chip_seqops->seqops;
- chip = chip_seqops->chip;
- get_device(&chip->dev);
- inode_unlock(inode);
-
- /* now register seq file */
- err = seq_open(file, seqops);
- if (!err) {
- seq = file->private_data;
- seq->private = chip;
- }
-
- return err;
-}
-
-static const struct file_operations tpm_bios_measurements_ops = {
- .owner = THIS_MODULE,
- .open = tpm_bios_measurements_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = tpm_bios_measurements_release,
-};
-
-static int is_bad(void *p)
-{
- if (!p)
- return 1;
- if (IS_ERR(p) && (PTR_ERR(p) != -ENODEV))
- return 1;
- return 0;
-}
-
-static int tpm_read_log(struct tpm_chip *chip)
-{
- int rc;
-
- if (chip->log.bios_event_log != NULL) {
- dev_dbg(&chip->dev,
- "%s: ERROR - event log already initialized\n",
- __func__);
- return -EFAULT;
- }
-
- rc = tpm_read_log_acpi(chip);
- if (rc != -ENODEV)
- return rc;
-
- return tpm_read_log_of(chip);
-}
-
-/*
- * tpm_bios_log_setup() - Read the event log from the firmware
- * @chip: TPM chip to use.
- *
- * If an event log is found then the securityfs files are setup to
- * export it to userspace, otherwise nothing is done.
- *
- * Returns -ENODEV if the firmware has no event log.
- */
-int tpm_bios_log_setup(struct tpm_chip *chip)
-{
- const char *name = dev_name(&chip->dev);
- unsigned int cnt;
- int rc = 0;
-
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- return 0;
-
- rc = tpm_read_log(chip);
- if (rc)
- return rc;
-
- cnt = 0;
- chip->bios_dir[cnt] = securityfs_create_dir(name, NULL);
- if (is_bad(chip->bios_dir[cnt]))
- goto err;
- cnt++;
-
- chip->bin_log_seqops.chip = chip;
- chip->bin_log_seqops.seqops = &tpm_binary_b_measurements_seqops;
-
- chip->bios_dir[cnt] =
- securityfs_create_file("binary_bios_measurements",
- 0440, chip->bios_dir[0],
- (void *)&chip->bin_log_seqops,
- &tpm_bios_measurements_ops);
- if (is_bad(chip->bios_dir[cnt]))
- goto err;
- cnt++;
-
- chip->ascii_log_seqops.chip = chip;
- chip->ascii_log_seqops.seqops = &tpm_ascii_b_measurements_seqops;
-
- chip->bios_dir[cnt] =
- securityfs_create_file("ascii_bios_measurements",
- 0440, chip->bios_dir[0],
- (void *)&chip->ascii_log_seqops,
- &tpm_bios_measurements_ops);
- if (is_bad(chip->bios_dir[cnt]))
- goto err;
- cnt++;
-
- return 0;
-
-err:
- chip->bios_dir[cnt] = NULL;
- tpm_bios_log_teardown(chip);
- return -EIO;
-}
-
-void tpm_bios_log_teardown(struct tpm_chip *chip)
-{
- int i;
- struct inode *inode;
-
- /* securityfs_remove currently doesn't take care of handling sync
- * between removal and opening of pseudo files. To handle this, a
- * workaround is added by making i_private = NULL here during removal
- * and to check it during open(), both within inode_lock()/unlock().
- * This design ensures that open() either safely gets kref or fails.
- */
- for (i = (TPM_NUM_EVENT_LOG_FILES - 1); i >= 0; i--) {
- if (chip->bios_dir[i]) {
- inode = d_inode(chip->bios_dir[i]);
- inode_lock(inode);
- inode->i_private = NULL;
- inode_unlock(inode);
- securityfs_remove(chip->bios_dir[i]);
- }
- }
-}
@@ -73,6 +73,9 @@ enum tcpa_pc_event_ids {
HOST_TABLE_OF_DEVICES,
};
+extern const struct seq_operations tpm_ascii_b_measurements_seqops;
+extern const struct seq_operations tpm_binary_b_measurements_seqops;
+
#if defined(CONFIG_ACPI)
int tpm_read_log_acpi(struct tpm_chip *chip);
#else
new file mode 100644
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2005, 2012 IBM Corporation
+ *
+ * Authors:
+ * Kent Yoder <key@linux.vnet.ibm.com>
+ * Seiji Munetoh <munetoh@jp.ibm.com>
+ * Stefan Berger <stefanb@us.ibm.com>
+ * Reiner Sailer <sailer@watson.ibm.com>
+ * Kylene Hall <kjhall@us.ibm.com>
+ * Nayna Jain <nayna@linux.vnet.ibm.com>
+ *
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
+ *
+ * Defines common initialization functions to access
+ * firmware event log for TPM 1.2 and TPM 2.0
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/security.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "tpm.h"
+#include "tpm_eventlog.h"
+
+static int tpm_bios_measurements_release(struct inode *inode,
+ struct file *file)
+{
+ struct seq_file *seq = (struct seq_file *)file->private_data;
+ struct tpm_chip *chip = (struct tpm_chip *)seq->private;
+
+ put_device(&chip->dev);
+
+ return seq_release(inode, file);
+}
+
+static int tpm_bios_measurements_open(struct inode *inode,
+ struct file *file)
+{
+ int err;
+ struct seq_file *seq;
+ struct tpm_chip_seqops *chip_seqops;
+ const struct seq_operations *seqops;
+ struct tpm_chip *chip;
+
+ inode_lock(inode);
+ if (!inode->i_private) {
+ inode_unlock(inode);
+ return -ENODEV;
+ }
+ chip_seqops = (struct tpm_chip_seqops *)inode->i_private;
+ seqops = chip_seqops->seqops;
+ chip = chip_seqops->chip;
+ get_device(&chip->dev);
+ inode_unlock(inode);
+
+ /* now register seq file */
+ err = seq_open(file, seqops);
+ if (!err) {
+ seq = file->private_data;
+ seq->private = chip;
+ }
+
+ return err;
+}
+
+static const struct file_operations tpm_bios_measurements_ops = {
+ .owner = THIS_MODULE,
+ .open = tpm_bios_measurements_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = tpm_bios_measurements_release,
+};
+
+static int is_bad(void *p)
+{
+ if (!p)
+ return 1;
+ if (IS_ERR(p) && (PTR_ERR(p) != -ENODEV))
+ return 1;
+ return 0;
+}
+
+static int tpm_read_log(struct tpm_chip *chip)
+{
+ int rc;
+
+ if (chip->log.bios_event_log != NULL) {
+ dev_dbg(&chip->dev,
+ "%s: ERROR - event log already initialized\n",
+ __func__);
+ return -EFAULT;
+ }
+
+ rc = tpm_read_log_acpi(chip);
+ if (rc != -ENODEV)
+ return rc;
+
+ return tpm_read_log_of(chip);
+}
+
+/*
+ * tpm_bios_log_setup() - Read the event log from the firmware
+ * @chip: TPM chip to use.
+ *
+ * If an event log is found then the securityfs files are setup to
+ * export it to userspace, otherwise nothing is done.
+ *
+ * Returns -ENODEV if the firmware has no event log.
+ */
+int tpm_bios_log_setup(struct tpm_chip *chip)
+{
+ const char *name = dev_name(&chip->dev);
+ unsigned int cnt;
+ int rc = 0;
+
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ return 0;
+
+ rc = tpm_read_log(chip);
+ if (rc)
+ return rc;
+
+ cnt = 0;
+ chip->bios_dir[cnt] = securityfs_create_dir(name, NULL);
+ if (is_bad(chip->bios_dir[cnt]))
+ goto err;
+ cnt++;
+
+ chip->bin_log_seqops.chip = chip;
+ chip->bin_log_seqops.seqops = &tpm_binary_b_measurements_seqops;
+
+ chip->bios_dir[cnt] =
+ securityfs_create_file("binary_bios_measurements",
+ 0440, chip->bios_dir[0],
+ (void *)&chip->bin_log_seqops,
+ &tpm_bios_measurements_ops);
+ if (is_bad(chip->bios_dir[cnt]))
+ goto err;
+ cnt++;
+
+ chip->ascii_log_seqops.chip = chip;
+ chip->ascii_log_seqops.seqops = &tpm_ascii_b_measurements_seqops;
+
+ chip->bios_dir[cnt] =
+ securityfs_create_file("ascii_bios_measurements",
+ 0440, chip->bios_dir[0],
+ (void *)&chip->ascii_log_seqops,
+ &tpm_bios_measurements_ops);
+ if (is_bad(chip->bios_dir[cnt]))
+ goto err;
+ cnt++;
+
+ return 0;
+
+err:
+ chip->bios_dir[cnt] = NULL;
+ tpm_bios_log_teardown(chip);
+ return -EIO;
+}
+
+void tpm_bios_log_teardown(struct tpm_chip *chip)
+{
+ int i;
+ struct inode *inode;
+
+ /* securityfs_remove currently doesn't take care of handling sync
+ * between removal and opening of pseudo files. To handle this, a
+ * workaround is added by making i_private = NULL here during removal
+ * and to check it during open(), both within inode_lock()/unlock().
+ * This design ensures that open() either safely gets kref or fails.
+ */
+ for (i = (TPM_NUM_EVENT_LOG_FILES - 1); i >= 0; i--) {
+ if (chip->bios_dir[i]) {
+ inode = d_inode(chip->bios_dir[i]);
+ inode_lock(inode);
+ inode->i_private = NULL;
+ inode_unlock(inode);
+ securityfs_remove(chip->bios_dir[i]);
+ }
+ }
+}
The device driver code for the event log has the init functions and TPM 1.2 parsing logic both defined in same file(tpm_eventlog.c). Since the initialization functions are common with the TPM 2.0 event log support, this patch splits tpm_eventlog.c to have only TPM 1.2 event log parsing logic and moves the init functions into tpm_eventlog_init.c. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> --- drivers/char/tpm/Makefile | 2 +- drivers/char/tpm/tpm_eventlog.c | 165 +----------------------------- drivers/char/tpm/tpm_eventlog.h | 3 + drivers/char/tpm/tpm_eventlog_init.c | 189 +++++++++++++++++++++++++++++++++++ 4 files changed, 197 insertions(+), 162 deletions(-) create mode 100644 drivers/char/tpm/tpm_eventlog_init.c