| Message ID | 1480164339-26409-2-git-send-email-nayna@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Nov 26, 2016 at 07:45:38AM -0500, Nayna Jain wrote: > Physical TPMs use Open Firmware Device Tree bindings that are similar > to the IBM Power virtual TPM to support event log. However, these > properties store the values in different endianness for Physical > and Virtual TPM. > > This patch fixes the endianness issue by doing appropriate conversion > based on Physical or Virtual TPM. > > Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> > --- > drivers/char/tpm/tpm_of.c | 27 +++++++++++++++++++++++---- > 1 file changed, 23 insertions(+), 4 deletions(-) > > diff --git a/drivers/char/tpm/tpm_of.c b/drivers/char/tpm/tpm_of.c > index 7dee42d7..4b0d5e6 100644 > --- a/drivers/char/tpm/tpm_of.c > +++ b/drivers/char/tpm/tpm_of.c > @@ -27,6 +27,8 @@ int tpm_read_log_of(struct tpm_chip *chip) > const u32 *sizep; > const u64 *basep; > struct tpm_bios_log *log; > + u32 log_size; > + u64 log_base; Maybe just base and size? > > log = &chip->log; > if (chip->dev.parent && chip->dev.parent->of_node) > @@ -41,18 +43,35 @@ int tpm_read_log_of(struct tpm_chip *chip) > if (sizep == NULL || basep == NULL) > return -EIO; > > - if (*sizep == 0) { > + /* > + * For both vtpm/tpm, firmware has log addr and log size in big > + * endian format. But in case of vtpm, there is a method called > + * sml-handover which is run during kernel init even before > + * device tree is setup. This sml-handover function takes care > + * of endianness and writes to sml-base and sml-size in little > + * endian format. For this reason, vtpm doesn't need conversion > + * but physical tpm needs the conversion. > + */ > + if (of_property_match_string(np, "compatible", "IBM,vtpm") < 0) { > + log_size = be32_to_cpup(sizep); > + log_base = be64_to_cpup(basep); > + } else { > + log_size = *sizep; > + log_base = *basep; > + } > + > + if (log_size == 0) { > dev_warn(&chip->dev, "%s: Event log area empty\n", __func__); > return -EIO; > } > > - log->bios_event_log = kmalloc(*sizep, GFP_KERNEL); > + log->bios_event_log = kmalloc(log_size, GFP_KERNEL); > if (!log->bios_event_log) > return -ENOMEM; > > - log->bios_event_log_end = log->bios_event_log + *sizep; > + log->bios_event_log_end = log->bios_event_log + log_size; > > - memcpy(log->bios_event_log, __va(*basep), *sizep); > + memcpy(chip->log.bios_event_log, __va(log_base), log_size); Why did you change the first parameter? > > return 0; > } > -- > 2.5.0 > /Jarkko -- To unsubscribe from this list: send the line "unsubscribe linux-security-module" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/26/2016 09:45 PM, Jarkko Sakkinen wrote: > On Sat, Nov 26, 2016 at 07:45:38AM -0500, Nayna Jain wrote: >> Physical TPMs use Open Firmware Device Tree bindings that are similar >> to the IBM Power virtual TPM to support event log. However, these >> properties store the values in different endianness for Physical >> and Virtual TPM. >> >> This patch fixes the endianness issue by doing appropriate conversion >> based on Physical or Virtual TPM. >> >> Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> >> --- >> drivers/char/tpm/tpm_of.c | 27 +++++++++++++++++++++++---- >> 1 file changed, 23 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/char/tpm/tpm_of.c b/drivers/char/tpm/tpm_of.c >> index 7dee42d7..4b0d5e6 100644 >> --- a/drivers/char/tpm/tpm_of.c >> +++ b/drivers/char/tpm/tpm_of.c >> @@ -27,6 +27,8 @@ int tpm_read_log_of(struct tpm_chip *chip) >> const u32 *sizep; >> const u64 *basep; >> struct tpm_bios_log *log; >> + u32 log_size; >> + u64 log_base; > > Maybe just base and size? Hmm.. okay to keep names short, I can change to base/size. And since they are used within log function, probably it is implicit that, these refer to Log base address and size. > >> >> log = &chip->log; >> if (chip->dev.parent && chip->dev.parent->of_node) >> @@ -41,18 +43,35 @@ int tpm_read_log_of(struct tpm_chip *chip) >> if (sizep == NULL || basep == NULL) >> return -EIO; >> >> - if (*sizep == 0) { >> + /* >> + * For both vtpm/tpm, firmware has log addr and log size in big >> + * endian format. But in case of vtpm, there is a method called >> + * sml-handover which is run during kernel init even before >> + * device tree is setup. This sml-handover function takes care >> + * of endianness and writes to sml-base and sml-size in little >> + * endian format. For this reason, vtpm doesn't need conversion >> + * but physical tpm needs the conversion. >> + */ >> + if (of_property_match_string(np, "compatible", "IBM,vtpm") < 0) { >> + log_size = be32_to_cpup(sizep); >> + log_base = be64_to_cpup(basep); >> + } else { >> + log_size = *sizep; >> + log_base = *basep; >> + } >> + >> + if (log_size == 0) { >> dev_warn(&chip->dev, "%s: Event log area empty\n", __func__); >> return -EIO; >> } >> >> - log->bios_event_log = kmalloc(*sizep, GFP_KERNEL); >> + log->bios_event_log = kmalloc(log_size, GFP_KERNEL); >> if (!log->bios_event_log) >> return -ENOMEM; >> >> - log->bios_event_log_end = log->bios_event_log + *sizep; >> + log->bios_event_log_end = log->bios_event_log + log_size; >> >> - memcpy(log->bios_event_log, __va(*basep), *sizep); >> + memcpy(chip->log.bios_event_log, __va(log_base), log_size); > > Why did you change the first parameter? Hmm.. yeah..shouldn't be. Sorry, I think while redoing, I mixed up with my previous versions. Will change it. Thanks for noticing it. Thanks & Regards, - Nayna > >> >> return 0; >> } >> -- >> 2.5.0 >> > > /Jarkko > -- To unsubscribe from this list: send the line "unsubscribe linux-security-module" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/char/tpm/tpm_of.c b/drivers/char/tpm/tpm_of.c index 7dee42d7..4b0d5e6 100644 --- a/drivers/char/tpm/tpm_of.c +++ b/drivers/char/tpm/tpm_of.c @@ -27,6 +27,8 @@ int tpm_read_log_of(struct tpm_chip *chip) const u32 *sizep; const u64 *basep; struct tpm_bios_log *log; + u32 log_size; + u64 log_base; log = &chip->log; if (chip->dev.parent && chip->dev.parent->of_node) @@ -41,18 +43,35 @@ int tpm_read_log_of(struct tpm_chip *chip) if (sizep == NULL || basep == NULL) return -EIO; - if (*sizep == 0) { + /* + * For both vtpm/tpm, firmware has log addr and log size in big + * endian format. But in case of vtpm, there is a method called + * sml-handover which is run during kernel init even before + * device tree is setup. This sml-handover function takes care + * of endianness and writes to sml-base and sml-size in little + * endian format. For this reason, vtpm doesn't need conversion + * but physical tpm needs the conversion. + */ + if (of_property_match_string(np, "compatible", "IBM,vtpm") < 0) { + log_size = be32_to_cpup(sizep); + log_base = be64_to_cpup(basep); + } else { + log_size = *sizep; + log_base = *basep; + } + + if (log_size == 0) { dev_warn(&chip->dev, "%s: Event log area empty\n", __func__); return -EIO; } - log->bios_event_log = kmalloc(*sizep, GFP_KERNEL); + log->bios_event_log = kmalloc(log_size, GFP_KERNEL); if (!log->bios_event_log) return -ENOMEM; - log->bios_event_log_end = log->bios_event_log + *sizep; + log->bios_event_log_end = log->bios_event_log + log_size; - memcpy(log->bios_event_log, __va(*basep), *sizep); + memcpy(chip->log.bios_event_log, __va(log_base), log_size); return 0; }
Physical TPMs use Open Firmware Device Tree bindings that are similar to the IBM Power virtual TPM to support event log. However, these properties store the values in different endianness for Physical and Virtual TPM. This patch fixes the endianness issue by doing appropriate conversion based on Physical or Virtual TPM. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> --- drivers/char/tpm/tpm_of.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-)