diff mbox

[3/5] dt-bindings: spi: Add documentation for the Armada 3700 SPI Controller

Message ID 20161129143939.3191-4-romain.perier@free-electrons.com (mailing list archive)
State Accepted
Commit 4049537742b3ed39fac4da10d31f3171a2ee9a3e
Headers show

Commit Message

Romain Perier Nov. 29, 2016, 2:39 p.m. UTC
This adds the devicetree bindings documentation for the SPI controller
present in the Marvell Armada 3700 SoCs.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
---
 .../devicetree/bindings/spi/spi-armada-3700.txt    | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-armada-3700.txt

Comments

Mark Brown Nov. 30, 2016, 12:46 p.m. UTC | #1
On Tue, Nov 29, 2016 at 03:39:37PM +0100, Romain Perier wrote:
> This adds the devicetree bindings documentation for the SPI controller
> present in the Marvell Armada 3700 SoCs.

Please submit patches using subject lines reflecting the style for the
subsystem.  This makes it easier for people to identify relevant
patches.  Look at what existing commits in the area you're changing are
doing and make sure your subject lines visually resemble what they're
doing.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-armada-3700.txt b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt
new file mode 100644
index 0000000..1564aa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt
@@ -0,0 +1,25 @@ 
+* Marvell Armada 3700 SPI Controller
+
+Required Properties:
+
+- compatible: should be "marvell,armada-3700-spi"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number. The interrupt specifier format depends on
+	      the interrupt controller and of its driver.
+- clocks: Must contain the clock source, usually from the North Bridge clocks.
+- num-cs: The number of chip selects that is supported by this SPI Controller
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Example:
+
+	spi0: spi@10600 {
+		compatible = "marvell,armada-3700-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10600 0x5d>;
+		clocks = <&nb_perih_clk 7>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <4>;
+	};