| Message ID | E1QZT9S-0004Vb-Hv@outmx03.plus.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Jun 22, 2011 at 4:31 PM, Paul Parsons <lost.distance@yahoo.com> wrote: > Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. > > Signed-off-by: Paul Parsons <lost.distance@yahoo.com> > --- > > This part of the HTC ASIC3 LED driver patch set was seemingly dropped, hence repost. > > --- clean-3.0-rc4/arch/arm/mach-pxa/hx4700.c 2011-06-21 04:25:46.000000000 +0100 > +++ linux-3.0-rc4/arch/arm/mach-pxa/hx4700.c 2011-06-22 10:43:18.986382990 +0100 > @@ -280,6 +280,21 @@ static u16 asic3_gpio_config[] = { > ASIC3_GPIOD15_nPIOW, > }; > > +static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = { > + [0] = { > + .name = "hx4700:amber", > + .default_trigger = "ds2760-battery.0-charging-blink-full-solid", > + }, > + [1] = { > + .name = "hx4700:green", > + .default_trigger = "unused", > + }, > + [2] = { > + .name = "hx4700:blue", > + .default_trigger = "hx4700-radio", > + }, > +}; Can't you use the generic LED driver instead? See an example here: http://git.pengutronix.de/?p=imx/linux-2.6.git;a=commitdiff;h=cf1738dad02f22781ae1f08414634086fc613d81 Regards, Fabio Estevam
On Wed, Jun 22, 2011 at 4:44 PM, Fabio Estevam <festevam@gmail.com> wrote: .. > Can't you use the generic LED driver instead? See an example here: > http://git.pengutronix.de/?p=imx/linux-2.6.git;a=commitdiff;h=cf1738dad02f22781ae1f08414634086fc613d81 Sorry, in your case it is not LED controlled via GPIO, so my previous does not apply. Regards, Fabio Estevam
--- clean-3.0-rc4/arch/arm/mach-pxa/hx4700.c 2011-06-21 04:25:46.000000000 +0100 +++ linux-3.0-rc4/arch/arm/mach-pxa/hx4700.c 2011-06-22 10:43:18.986382990 +0100 @@ -280,6 +280,21 @@ static u16 asic3_gpio_config[] = { ASIC3_GPIOD15_nPIOW, }; +static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = { + [0] = { + .name = "hx4700:amber", + .default_trigger = "ds2760-battery.0-charging-blink-full-solid", + }, + [1] = { + .name = "hx4700:green", + .default_trigger = "unused", + }, + [2] = { + .name = "hx4700:blue", + .default_trigger = "hx4700-radio", + }, +}; + static struct resource asic3_resources[] = { /* GPIO part */ [0] = { @@ -310,6 +325,7 @@ static struct asic3_platform_data asic3_ .gpio_config_num = ARRAY_SIZE(asic3_gpio_config), .irq_base = IRQ_BOARD_START, .gpio_base = HX4700_ASIC3_GPIO_BASE, + .leds = asic3_leds, }; static struct platform_device asic3 = {
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> --- This part of the HTC ASIC3 LED driver patch set was seemingly dropped, hence repost.