| Message ID | 1480673842-20804-3-git-send-email-benjamin.gaignard@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 02 Dec 2016, Benjamin Gaignard wrote: > This hardware block could at used at same time for PWM generation > and IIO timer for other IPs like DAC, ADC or other timers. > PWM and IIO timer configuration are mixed in the same registers > so we need a multi fonction driver to be able to share those registers. > > version 2: > - rename driver "stm32-gptimer" to be align with SoC documentation > - only keep one compatible > - use of_platform_populate() instead of devm_mfd_add_devices() > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> > --- > drivers/mfd/Kconfig | 10 ++++++ > drivers/mfd/Makefile | 2 ++ > drivers/mfd/stm32-gptimer.c | 73 +++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/stm32-gptimer.h | 62 +++++++++++++++++++++++++++++++++ > 4 files changed, 147 insertions(+) > create mode 100644 drivers/mfd/stm32-gptimer.c > create mode 100644 include/linux/mfd/stm32-gptimer.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index c6df644..e75abcb 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -1607,6 +1607,15 @@ config MFD_STW481X > in various ST Microelectronics and ST-Ericsson embedded > Nomadik series. > > +config MFD_STM32_GP_TIMER > + tristate "Support for STM32 General Purpose Timer" > + select MFD_CORE > + select REGMAP > + depends on ARCH_STM32 > + depends on OF "|| COMPILE_TEST"? > + help > + Select this option to enable stm32 general purpose timer I can see that. Tell us more about the device and what it does. s/stm32/STM32/ > menu "Multimedia Capabilities Port drivers" > depends on ARCH_SA1100 > > @@ -1644,4 +1653,5 @@ config MFD_VEXPRESS_SYSREG > on the ARM Ltd. Versatile Express board. > > endmenu > + Please remove this change. It has nothing to do with the set. > endif > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 9834e66..86353b9 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -211,3 +211,5 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o > > obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o > + > +obj-$(CONFIG_MFD_STM32_GP_TIMER) += stm32-gptimer.o > diff --git a/drivers/mfd/stm32-gptimer.c b/drivers/mfd/stm32-gptimer.c > new file mode 100644 > index 0000000..54fb95c > --- /dev/null > +++ b/drivers/mfd/stm32-gptimer.c > @@ -0,0 +1,73 @@ > +/* > + * stm32-gptimer.c Swap this out for a description. > + * Copyright (C) STMicroelectronics 2016 '\n' > + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics. > + * License terms: GNU General Public License (GPL), version 2 > + */ > + > +#include <linux/module.h> > +#include <linux/of_platform.h> > +#include <linux/reset.h> > + > +#include <linux/mfd/stm32-gptimer.h> > + > +static const struct regmap_config stm32_gptimer_regmap_cfg = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = sizeof(u32), > + .max_register = 0x400, > + .fast_io = true, > +}; > + > +static int stm32_gptimer_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct stm32_gptimer_dev *mfd; s/mfd/ddata/ > + struct resource *res; > + void __iomem *mmio; > + > + mfd = devm_kzalloc(dev, sizeof(*mfd), GFP_KERNEL); > + if (!mfd) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) > + return -ENOMEM; > + Remove this 3 lines. devm_ioremap_resource() does the checking and error printing for you. > + mmio = devm_ioremap_resource(dev, res); > + if (IS_ERR(mmio)) > + return PTR_ERR(mmio); > + > + mfd->regmap = devm_regmap_init_mmio_clk(dev, "clk_int", mmio, > + &stm32_gptimer_regmap_cfg); > + if (IS_ERR(mfd->regmap)) > + return PTR_ERR(mfd->regmap); > + > + mfd->clk = devm_clk_get(dev, NULL); > + if (IS_ERR(mfd->clk)) > + return PTR_ERR(mfd->clk); > + > + platform_set_drvdata(pdev, mfd); > + > + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); > +} > + > +static const struct of_device_id stm32_gptimer_of_match[] = { > + { > + .compatible = "st,stm32-gptimer", > + }, One line: { .compatible = "st,stm32-gptimer" }, > +}; > +MODULE_DEVICE_TABLE(of, stm32_gptimer_of_match); > + > +static struct platform_driver stm32_gptimer_driver = { > + .probe = stm32_gptimer_probe, > + .driver = { > + .name = "stm32-gptimer", > + .of_match_table = stm32_gptimer_of_match, > + }, Remove tabs before the '='s. > +module_platform_driver(stm32_gptimer_driver); > + > +MODULE_DESCRIPTION("STMicroelectronics STM32 general purpose timer"); "General Purpose Timer" > +MODULE_LICENSE("GPL"); "GPL v2" > diff --git a/include/linux/mfd/stm32-gptimer.h b/include/linux/mfd/stm32-gptimer.h > new file mode 100644 > index 0000000..f8c92de > --- /dev/null > +++ b/include/linux/mfd/stm32-gptimer.h > @@ -0,0 +1,62 @@ > +/* > + * stm32-gptimer.h > + * > + * Copyright (C) STMicroelectronics 2016 > + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics. > + * License terms: GNU General Public License (GPL), version 2 > + */ Same comments as before. > +#ifndef _LINUX_STM32_GPTIMER_H_ > +#define _LINUX_STM32_GPTIMER_H_ > + > +#include <linux/clk.h> > +#include <linux/regmap.h> > + > +#define TIM_CR1 0x00 /* Control Register 1 */ > +#define TIM_CR2 0x04 /* Control Register 2 */ > +#define TIM_SMCR 0x08 /* Slave mode control reg */ > +#define TIM_DIER 0x0C /* DMA/interrupt register */ > +#define TIM_SR 0x10 /* Status register */ > +#define TIM_EGR 0x14 /* Event Generation Reg */ > +#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */ > +#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */ > +#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */ > +#define TIM_PSC 0x28 /* Prescaler */ > +#define TIM_ARR 0x2c /* Auto-Reload Register */ > +#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */ > +#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */ > +#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */ > +#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */ > +#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */ > + > +#define TIM_CR1_CEN BIT(0) /* Counter Enable */ > +#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */ > +#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */ > +#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */ > +#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */ > +#define TIM_DIER_UIE BIT(0) /* Update interrupt */ > +#define TIM_SR_UIF BIT(0) /* Update interrupt flag */ > +#define TIM_EGR_UG BIT(0) /* Update Generation */ > +#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */ > +#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */ > +#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */ > +#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */ > +#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */ > +#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */ > +#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12)) > +#define TIM_BDTR_BKE BIT(12) /* Break input enable */ > +#define TIM_BDTR_BKP BIT(13) /* Break input polarity */ > +#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */ > +#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */ > + > +#define MAX_TIM_PSC 0xFFFF > + > +struct stm32_gptimer_dev { Drop the "_dev" or replace with ddata. > + /* Device data */ No need for this. > + struct clk *clk; > + > + /* Registers mapping */ No need for this. > + struct regmap *regmap; > +}; > + > +#endif
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index c6df644..e75abcb 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1607,6 +1607,15 @@ config MFD_STW481X in various ST Microelectronics and ST-Ericsson embedded Nomadik series. +config MFD_STM32_GP_TIMER + tristate "Support for STM32 General Purpose Timer" + select MFD_CORE + select REGMAP + depends on ARCH_STM32 + depends on OF + help + Select this option to enable stm32 general purpose timer + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 @@ -1644,4 +1653,5 @@ config MFD_VEXPRESS_SYSREG on the ARM Ltd. Versatile Express board. endmenu + endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 9834e66..86353b9 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -211,3 +211,5 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o + +obj-$(CONFIG_MFD_STM32_GP_TIMER) += stm32-gptimer.o diff --git a/drivers/mfd/stm32-gptimer.c b/drivers/mfd/stm32-gptimer.c new file mode 100644 index 0000000..54fb95c --- /dev/null +++ b/drivers/mfd/stm32-gptimer.c @@ -0,0 +1,73 @@ +/* + * stm32-gptimer.c + * + * Copyright (C) STMicroelectronics 2016 + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/reset.h> + +#include <linux/mfd/stm32-gptimer.h> + +static const struct regmap_config stm32_gptimer_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = sizeof(u32), + .max_register = 0x400, + .fast_io = true, +}; + +static int stm32_gptimer_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct stm32_gptimer_dev *mfd; + struct resource *res; + void __iomem *mmio; + + mfd = devm_kzalloc(dev, sizeof(*mfd), GFP_KERNEL); + if (!mfd) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOMEM; + + mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(mmio)) + return PTR_ERR(mmio); + + mfd->regmap = devm_regmap_init_mmio_clk(dev, "clk_int", mmio, + &stm32_gptimer_regmap_cfg); + if (IS_ERR(mfd->regmap)) + return PTR_ERR(mfd->regmap); + + mfd->clk = devm_clk_get(dev, NULL); + if (IS_ERR(mfd->clk)) + return PTR_ERR(mfd->clk); + + platform_set_drvdata(pdev, mfd); + + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); +} + +static const struct of_device_id stm32_gptimer_of_match[] = { + { + .compatible = "st,stm32-gptimer", + }, +}; +MODULE_DEVICE_TABLE(of, stm32_gptimer_of_match); + +static struct platform_driver stm32_gptimer_driver = { + .probe = stm32_gptimer_probe, + .driver = { + .name = "stm32-gptimer", + .of_match_table = stm32_gptimer_of_match, + }, +}; +module_platform_driver(stm32_gptimer_driver); + +MODULE_DESCRIPTION("STMicroelectronics STM32 general purpose timer"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/stm32-gptimer.h b/include/linux/mfd/stm32-gptimer.h new file mode 100644 index 0000000..f8c92de --- /dev/null +++ b/include/linux/mfd/stm32-gptimer.h @@ -0,0 +1,62 @@ +/* + * stm32-gptimer.h + * + * Copyright (C) STMicroelectronics 2016 + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _LINUX_STM32_GPTIMER_H_ +#define _LINUX_STM32_GPTIMER_H_ + +#include <linux/clk.h> +#include <linux/regmap.h> + +#define TIM_CR1 0x00 /* Control Register 1 */ +#define TIM_CR2 0x04 /* Control Register 2 */ +#define TIM_SMCR 0x08 /* Slave mode control reg */ +#define TIM_DIER 0x0C /* DMA/interrupt register */ +#define TIM_SR 0x10 /* Status register */ +#define TIM_EGR 0x14 /* Event Generation Reg */ +#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */ +#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */ +#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */ +#define TIM_PSC 0x28 /* Prescaler */ +#define TIM_ARR 0x2c /* Auto-Reload Register */ +#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */ +#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */ +#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */ +#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */ +#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */ + +#define TIM_CR1_CEN BIT(0) /* Counter Enable */ +#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */ +#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */ +#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */ +#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */ +#define TIM_DIER_UIE BIT(0) /* Update interrupt */ +#define TIM_SR_UIF BIT(0) /* Update interrupt flag */ +#define TIM_EGR_UG BIT(0) /* Update Generation */ +#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */ +#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */ +#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */ +#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */ +#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */ +#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */ +#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12)) +#define TIM_BDTR_BKE BIT(12) /* Break input enable */ +#define TIM_BDTR_BKP BIT(13) /* Break input polarity */ +#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */ +#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */ + +#define MAX_TIM_PSC 0xFFFF + +struct stm32_gptimer_dev { + /* Device data */ + struct clk *clk; + + /* Registers mapping */ + struct regmap *regmap; +}; + +#endif
This hardware block could at used at same time for PWM generation and IIO timer for other IPs like DAC, ADC or other timers. PWM and IIO timer configuration are mixed in the same registers so we need a multi fonction driver to be able to share those registers. version 2: - rename driver "stm32-gptimer" to be align with SoC documentation - only keep one compatible - use of_platform_populate() instead of devm_mfd_add_devices() Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- drivers/mfd/Kconfig | 10 ++++++ drivers/mfd/Makefile | 2 ++ drivers/mfd/stm32-gptimer.c | 73 +++++++++++++++++++++++++++++++++++++++ include/linux/mfd/stm32-gptimer.h | 62 +++++++++++++++++++++++++++++++++ 4 files changed, 147 insertions(+) create mode 100644 drivers/mfd/stm32-gptimer.c create mode 100644 include/linux/mfd/stm32-gptimer.h