diff mbox

[v8,8/8] cpufreq: intel_pstate: Use CPPC to get max performance

Message ID 20161207190608.boi7svavwrkx3epm@breakpoint.cc (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Sebastian Andrzej Siewior Dec. 7, 2016, 7:06 p.m. UTC
On 2016-11-22 12:24:00 [-0800], Tim Chen wrote:
> From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
> 
> This change uses acpi cppc_lib interface to get CPPC performance limits
> and calls scheduler interface to update per cpu highest priority. If
> there is a difference in highest performance of each CPUs, call scheduler
> interface to enable ITMT feature for only one time.
> 
> Here sched_set_itmt_core_prio() is called to set priorities and
> sched_set_itmt_support() is called to enable ITMT feature.

First I had crashed what I bisected down to de966cf4a4fa ("sched/x86: Change
CONFIG_SCHED_ITMT to CONFIG_SCHED_MC_PRIO") because it made SCHED_ITMT the
default.
Then I run another bisect round and got here with the same backtrace:
|BUG: unable to handle kernel NULL pointer dereference at           (null)
|IP: [<ffffffff812aab6e>] acpi_cppc_processor_exit+0x40/0x60
|PGD 0 [    0.577616]
|Oops: 0000 [#1] SMP
|Modules linked in:
|CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc6-00146-g17669006adf6 #51
|task: ffff88003f878000 task.stack: ffffc90000008000
|RIP: 0010:[<ffffffff812aab6e>]  [<ffffffff812aab6e>] acpi_cppc_processor_exit+0x40/0x60
|RSP: 0000:ffffc9000000bd48  EFLAGS: 00010296
|RAX: 00000000000137e0 RBX: 0000000000000000 RCX: 0000000000000001
|RDX: ffff88003fc00000 RSI: 0000000000000000 RDI: ffff88003fbca130
|RBP: ffffc9000000bd60 R08: 0000000000000514 R09: 0000000000000000
|R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002
|R13: 0000000000000020 R14: ffffffff8167cb00 R15: 0000000000000000
|FS:  0000000000000000(0000) GS:ffff88003fcc0000(0000) knlGS:0000000000000000
|CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
|CR2: 0000000000000000 CR3: 0000000001618000 CR4: 00000000000406e0
|Stack:
| ffff88003f939848 ffff88003fbca130 0000000000000001 ffffc9000000bd80
| ffffffff812a4ccb ffff88003fc0cee8 0000000000000000 ffffc9000000bdb8
| ffffffff812dc20d ffff88003fc0cee8 ffffffff8167cb00 ffff88003fc0cf48
|Call Trace:
| [<ffffffff812a4ccb>] acpi_processor_stop+0xb2/0xc5
| [<ffffffff812dc20d>] driver_probe_device+0x14d/0x2f0
| [<ffffffff812dc41e>] __driver_attach+0x6e/0x90
| [<ffffffff812da234>] bus_for_each_dev+0x54/0x90
| [<ffffffff812dbbf9>] driver_attach+0x19/0x20
| [<ffffffff812db6a6>] bus_add_driver+0xe6/0x200
| [<ffffffff812dcb23>] driver_register+0x83/0xc0
| [<ffffffff816f050a>] acpi_processor_driver_init+0x20/0x94
| [<ffffffff81000487>] do_one_initcall+0x97/0x180
| [<ffffffff816ccf5c>] kernel_init_freeable+0x112/0x1a6
| [<ffffffff813a0fc9>] kernel_init+0x9/0xf0
| [<ffffffff813acf35>] ret_from_fork+0x25/0x30
|Code: 02 00 00 00 48 8b 14 d5 e0 c3 55 81 48 8b 1c 02 4c 8d 6b 20 eb 15 49 8b 7d 00 48 85 ff 74 05 e8 39 8c d9 ff 41 ff c4 49 83 c5 20 <44> 3b 23 72 e6 48 8d bb a0 02 00 00 e8 b1 6f f9 ff 48 89 df e8
|RIP  [<ffffffff812aab6e>] acpi_cppc_processor_exit+0x40/0x60
| RSP <ffffc9000000bd48>
|CR2: 0000000000000000
|---[ end trace 917a625107b09711 ]---

The patch attached fixes it. Could someone who looked longer at the code
than I actually confirm that this fine or fix it differently? This makes
the crash on boot on a "default" kvm setup go away.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 drivers/acpi/cppc_acpi.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Tim Chen Dec. 7, 2016, 11:12 p.m. UTC | #1
On Wed, 2016-12-07 at 20:06 +0100, Sebastian Andrzej Siewior wrote:

> 
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
>  drivers/acpi/cppc_acpi.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> index d0d0504b7c89..93252e5374c5 100644
> --- a/drivers/acpi/cppc_acpi.c
> +++ b/drivers/acpi/cppc_acpi.c
> @@ -803,6 +803,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
>  		if (addr)
>  			iounmap(addr);
>  	}
> +	per_cpu(cpc_desc_ptr, pr->id) = NULL;
>  	kfree(cpc_ptr);
>  
>  out_buf_free:
> @@ -824,6 +825,8 @@ void acpi_cppc_processor_exit(struct acpi_processor *pr)
>  	void __iomem *addr;
>  
>  	cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
> +	if (!cpc_ptr)
> +		return;

I agree that not handling null pointer here is a bug that should be fixed.
The cpc_ptr is checked at other places like acpi_get_psd_map.  
We could potentially have a null cpc_ptr say when
the parsing of CPC table failed. We should handle such cases gracefully.

Tim

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index d0d0504b7c89..93252e5374c5 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -803,6 +803,7 @@  int acpi_cppc_processor_probe(struct acpi_processor *pr)
 		if (addr)
 			iounmap(addr);
 	}
+	per_cpu(cpc_desc_ptr, pr->id) = NULL;
 	kfree(cpc_ptr);
 
 out_buf_free:
@@ -824,6 +825,8 @@  void acpi_cppc_processor_exit(struct acpi_processor *pr)
 	void __iomem *addr;
 
 	cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
+	if (!cpc_ptr)
+		return;
 
 	/* Free all the mapped sys mem areas for this CPU */
 	for (i = 2; i < cpc_ptr->num_entries; i++) {