diff mbox

[RESEND,v2,5/7] drm/vc4: Document VEC DT binding

Message ID 1480686493-4813-6-git-send-email-boris.brezillon@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Boris BREZILLON Dec. 2, 2016, 1:48 p.m. UTC
Document the DT binding for the VEC (Video EnCoder) IP.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Rob Herring Dec. 9, 2016, 9 p.m. UTC | #1
On Fri, Dec 02, 2016 at 02:48:11PM +0100, Boris Brezillon wrote:
> Document the DT binding for the VEC (Video EnCoder) IP.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
>  Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>
Eric Anholt Dec. 9, 2016, 11:37 p.m. UTC | #2
Rob Herring <robh@kernel.org> writes:

> On Fri, Dec 02, 2016 at 02:48:11PM +0100, Boris Brezillon wrote:
>> Document the DT binding for the VEC (Video EnCoder) IP.
>> 
>> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>> ---
>>  Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 14 ++++++++++++++
>>  1 file changed, 14 insertions(+)
>
> Acked-by: Rob Herring <robh@kernel.org>

Thanks.  Pulling the series now.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index a5ea451e67fc..e2768703ac2b 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -43,6 +43,13 @@  Required properties for DPI:
 - port:		Port node with a single endpoint connecting to the panel
 		  device, as defined in [1]
 
+Required properties for VEC:
+- compatible:	Should be "brcm,bcm2835-vec"
+- reg:		Physical base address and length of the registers
+- clocks:	The core clock the unit runs on
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
 Required properties for V3D:
 - compatible:	Should be "brcm,bcm2835-v3d"
 - reg:		Physical base address and length of the V3D's registers
@@ -92,6 +99,13 @@  dpi: dpi@7e208000 {
 	};
 };
 
+vec: vec@7e806000 {
+	compatible = "brcm,bcm2835-vec";
+	reg = <0x7e806000 0x1000>;
+	clocks = <&clocks BCM2835_CLOCK_VEC>;
+	interrupts = <2 27>;
+};
+
 v3d: v3d@7ec00000 {
 	compatible = "brcm,bcm2835-v3d";
 	reg = <0x7ec00000 0x1000>;