diff mbox

[03/11] driver: clk: imx: Add clock driver for imx6sll

Message ID 1480660774-25055-4-git-send-email-ping.bai@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jacky Bai Dec. 2, 2016, 6:39 a.m. UTC 
Add clk driver support for imx6sll.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
 drivers/clk/imx/Makefile                  |   1 +
 drivers/clk/imx/clk-imx6sll.c             | 366 ++++++++++++++++++++++++++++++
 include/dt-bindings/clock/imx6sll-clock.h | 204 +++++++++++++++++
 3 files changed, 571 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx6sll.c
 create mode 100644 include/dt-bindings/clock/imx6sll-clock.h

Comments

Stephen Boyd Dec. 8, 2016, 10:52 p.m. UTC | #1 
On 12/02, Bai Ping wrote:
> diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c
> new file mode 100644
> index 0000000..c5219e1
> --- /dev/null
> +++ b/drivers/clk/imx/clk-imx6sll.c
> @@ -0,0 +1,366 @@
> +/*
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <dt-bindings/clock/imx6sll-clock.h>
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>

Is this include used?

> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/types.h>

Is there an include of clk_provider.h missing?

> +
> +#include "clk.h"
> +
> +#define BM_CCM_CCDR_MMDC_CH0_MASK	(0x2 << 16)
> +#define CCDR	0x4
> +
> +static const char *pll_bypass_src_sels[] = { "osc", "dummy", };

const char * const? For all of these names.

> +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
> +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
> +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
> +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
> +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
> +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
> +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
> +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
> +static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
> +static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", };
> +static const char *axi_sels[] = {"periph", "axi_alt_sel", };
> +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
> +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
> +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", };
> +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", };
> +static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
> +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
> +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
> +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",};
> +static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
> +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", };
> +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", };
> +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
> +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
> +static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
> +static const char *ecspi_sels[] = { "pll3_60m", "osc", };
> +static const char *uart_sels[] = { "pll3_80m", "osc", };
> +static const char *perclk_sels[] = { "ipg", "osc", };
> +static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
> +
> +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
> +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
> +
> +static struct clk *clks[IMX6SLL_CLK_END];
> +static struct clk_onecell_data clk_data;
> +
> +static int const clks_init_on[] __initconst = {

static const int is more preferred style.

> +	IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2,
> +	IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM,
> +	IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG,
> +};
> +
> +static struct clk_div_table post_div_table[] = {

const?

> +	{ .val = 2, .div = 1, },
> +	{ .val = 1, .div = 2, },
> +	{ .val = 0, .div = 4, },
> +	{ }
> +};
> +
> +static struct clk_div_table video_div_table[] = {

const?

> +	{ .val = 0, .div = 1, },
> +	{ .val = 1, .div = 2, },
> +	{ .val = 2, .div = 1, },
> +	{ .val = 3, .div = 4, },
> +	{ }
> +};
> +
> +static u32 share_count_audio;
> +static u32 share_count_ssi1;
> +static u32 share_count_ssi2;
> +static u32 share_count_ssi3;
> +
> +static void __init imx6sll_clocks_init(struct device_node *ccm_node)
> +{
> +	struct device_node *np;
> +	void __iomem *base;
> +	int i;
> +
> +	clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
> +
> +	clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
> +	clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
> +
> +	/* ipp_di clock is external input */
> +	clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
> +	clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
> +
> +	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop");
> +	base = of_iomap(np, 0);
> +	WARN_ON(!base);
> +
> +	clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> +	clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> +	clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> +	clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> +	clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> +	clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> +	clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> +
> +	clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS,	 "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
> +	clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
> +	clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB,	 "pll3", "pll3_bypass_src", base + 0x10, 0x3);
> +	clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV,	 "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
> +	clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV,	 "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
> +	clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET,	 "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
> +	clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB,	 "pll7", "pll7_bypass_src", base + 0x20, 0x3);
> +
> +	clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
> +	clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
> +	clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
> +	clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
> +	clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
> +	clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
> +	clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
> +
> +	/* Do not bypass PLLs initially */
> +	clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]);
> +	clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]);
> +	clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]);
> +	clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]);
> +	clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]);
> +	clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]);
> +	clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]);

Can we just put raw register writes here instead? I'd prefer we
didn't use clk consumer APIs to do things to the clk tree from
the providers. The problem there being that:

 1) We're trying to move away from using consumer APIs in
 provider drivers. It's ok if they're used during probe, but
 inside clk_ops is not preferred.

 2) Even if you have a clk pointer, it may be "orphaned" at the
 time of registration and so calling the APIs here works now but
 eventually we may want to return an EPROBE_DEFER error in that
 case and this may block that effort.

I suppose if this is the only clk driver on this machine then
this last point isn't a concern and things are probably ok here.
Jacky Bai Dec. 12, 2016, 2:58 a.m. UTC | #2 
> Subject: Re: [PATCH 03/11] driver: clk: imx: Add clock driver for imx6sll
> 
> On 12/02, Bai Ping wrote:
> > diff --git a/drivers/clk/imx/clk-imx6sll.c
> > b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index
> > 0000000..c5219e1
> > --- /dev/null
> > +++ b/drivers/clk/imx/clk-imx6sll.c
> > @@ -0,0 +1,366 @@
> > +/*
> > + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +
> > +#include <dt-bindings/clock/imx6sll-clock.h>
> > +#include <linux/clk.h>
> > +#include <linux/clkdev.h>
> 
> Is this include used?
> 

It seems no use, I will remove it in V2.

> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/io.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/types.h>
> 
> Is there an include of clk_provider.h missing?
> 

clk_provider.h is included in below "clk.h".

> > +
> > +#include "clk.h"
> > +
> > +#define BM_CCM_CCDR_MMDC_CH0_MASK	(0x2 << 16)
> > +#define CCDR	0x4
> > +
> > +static const char *pll_bypass_src_sels[] = { "osc", "dummy", };
> 
> const char * const? For all of these names.
> 

ok, I will fix in V2.

> > +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src",
> > +}; static const char *pll2_bypass_sels[] = { "pll2",
> > +"pll2_bypass_src", }; static const char *pll3_bypass_sels[] = {
> > +"pll3", "pll3_bypass_src", }; static const char *pll4_bypass_sels[] =
> > +{ "pll4", "pll4_bypass_src", }; static const char *pll5_bypass_sels[]
> > += { "pll5", "pll5_bypass_src", }; static const char
> > +*pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; static const
> > +char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; static
> > +const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const
> > +char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char
> > +*axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", }; static
> > +const char *axi_sels[] = {"periph", "axi_alt_sel", }; static const
> > +char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m",
> > +"pll2_pfd0_352m", "pll2_198m", }; static const char
> > +*periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m",
> > +"pll2_pfd0_352m", "pll4_audio_div", }; static const char
> > +*periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; static const
> > +char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; static const
> > +char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const
> > +char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static
> > +const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
> > +static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m",
> > +"pll4_audio_div", "dummy",}; static const char *spdif_sels[] = {
> > +"pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg",
> > +}; static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5",
> > +"ldb_di0_div_7", }; static const char *ldb_di1_div_sels[] = {
> > +"ldb_di1_div_3_5", "ldb_di1_div_7", }; static const char
> > +*ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m",
> > +"pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m",
> > +"pll3_pfd3_454m", }; static const char *ldb_di1_sels[] = {
> > +"pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus",
> > +"pll3_pfd3_454m", "pll3_pfd2_508m", }; static const char
> > +*lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div",
> > +"pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; static const
> > +char *ecspi_sels[] = { "pll3_60m", "osc", }; static const char
> > +*uart_sels[] = { "pll3_80m", "osc", }; static const char
> > +*perclk_sels[] = { "ipg", "osc", }; static const char *lcdif_sels[] =
> > +{ "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
> > +
> > +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg",
> > +"pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m",
> > +"pll3_pfd2_508m", }; static const char *epdc_sels[] = { "epdc_podf",
> > +"ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
> > +
> > +static struct clk *clks[IMX6SLL_CLK_END]; static struct
> > +clk_onecell_data clk_data;
> > +
> > +static int const clks_init_on[] __initconst = {
> 
> static const int is more preferred style.
> 

ok, will fix in V2.

> > +	IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2,
> > +	IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM,
> > +	IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG, };
> > +
> > +static struct clk_div_table post_div_table[] = {
> 
> const?
> 

ok, will fix in V2.

> > +	{ .val = 2, .div = 1, },
> > +	{ .val = 1, .div = 2, },
> > +	{ .val = 0, .div = 4, },
> > +	{ }
> > +};
> > +
> > +static struct clk_div_table video_div_table[] = {
> 
> const?
> 

ok. will fix in V2.

> > +	{ .val = 0, .div = 1, },
> > +	{ .val = 1, .div = 2, },
> > +	{ .val = 2, .div = 1, },
> > +	{ .val = 3, .div = 4, },
> > +	{ }
> > +};
> > +
> > +static u32 share_count_audio;
> > +static u32 share_count_ssi1;
> > +static u32 share_count_ssi2;
> > +static u32 share_count_ssi3;
> > +
> > +static void __init imx6sll_clocks_init(struct device_node *ccm_node)
> > +{
> > +	struct device_node *np;
> > +	void __iomem *base;
> > +	int i;
> > +
> > +	clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
> > +
> > +	clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
> > +	clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
> > +
> > +	/* ipp_di clock is external input */
> > +	clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node,
> "ipp_di0");
> > +	clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node,
> "ipp_di1");
> > +
> > +	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop");
> > +	base = of_iomap(np, 0);
> > +	WARN_ON(!base);
> > +
> > +	clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src",
> base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> > +	clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src",
> base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> > +	clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src",
> base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> > +	clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src",
> base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> > +	clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src",
> base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> > +	clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src",
> base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> > +	clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src",
> base
> > ++ 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
> > +
> > +	clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS,	 "pll1",
> "pll1_bypass_src", base + 0x00, 0x7f);
> > +	clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2",
> "pll2_bypass_src", base + 0x30, 0x1);
> > +	clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB,	 "pll3",
> "pll3_bypass_src", base + 0x10, 0x3);
> > +	clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV,	 "pll4",
> "pll4_bypass_src", base + 0x70, 0x7f);
> > +	clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV,	 "pll5",
> "pll5_bypass_src", base + 0xa0, 0x7f);
> > +	clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET,	 "pll6",
> "pll6_bypass_src", base + 0xe0, 0x3);
> > +	clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB,	 "pll7",
> "pll7_bypass_src", base + 0x20, 0x3);
> > +
> > +	clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base
> + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels),
> CLK_SET_RATE_PARENT);
> > +	clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base
> + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels),
> CLK_SET_RATE_PARENT);
> > +	clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base
> + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels),
> CLK_SET_RATE_PARENT);
> > +	clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base
> + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels),
> CLK_SET_RATE_PARENT);
> > +	clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base
> + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels),
> CLK_SET_RATE_PARENT);
> > +	clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base
> + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels),
> CLK_SET_RATE_PARENT);
> > +	clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base
> +
> > +0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels),
> > +CLK_SET_RATE_PARENT);
> > +
> > +	/* Do not bypass PLLs initially */
> > +	clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]);
> > +	clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]);
> > +	clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]);
> > +	clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]);
> > +	clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]);
> > +	clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]);
> > +	clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]);
> 
> Can we just put raw register writes here instead? I'd prefer we didn't use clk
> consumer APIs to do things to the clk tree from the providers. The problem
> there being that:
> 
>  1) We're trying to move away from using consumer APIs in  provider drivers.
> It's ok if they're used during probe, but  inside clk_ops is not preferred.
> 
>  2) Even if you have a clk pointer, it may be "orphaned" at the  time of
> registration and so calling the APIs here works now but  eventually we may
> want to return an EPROBE_DEFER error in that  case and this may block that
> effort.
> 
> I suppose if this is the only clk driver on this machine then this last point isn't a
> concern and things are probably ok here.
> 

Using raw register writing has an issue.  The register is modified, but it seems the clock 'parent-child' relationship can 
not match the register setting. The register setting is not bypass the pll, but in debug 'clk_summary', the
pll is bypassed.  

BR

> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux
> Foundation Collaborative Project
Stephen Boyd Dec. 13, 2016, 11:28 p.m. UTC | #3 
On 12/12, Jacky Bai wrote:
> > On 12/02, Bai Ping wrote:
> > > diff --git a/drivers/clk/imx/clk-imx6sll.c
> > > b/drivers/clk/imx/clk-imx6sll.c new file mode 100644 index
> > > 0000000..c5219e1
> > > --- /dev/null
> > > +++ b/drivers/clk/imx/clk-imx6sll.c
> > > +0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels),
> > > +CLK_SET_RATE_PARENT);
> > > +
> > > +	/* Do not bypass PLLs initially */
> > > +	clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]);
> > > +	clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]);
> > > +	clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]);
> > > +	clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]);
> > > +	clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]);
> > > +	clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]);
> > > +	clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]);
> > 
> > Can we just put raw register writes here instead? I'd prefer we didn't use clk
> > consumer APIs to do things to the clk tree from the providers. The problem
> > there being that:
> > 
> >  1) We're trying to move away from using consumer APIs in  provider drivers.
> > It's ok if they're used during probe, but  inside clk_ops is not preferred.
> > 
> >  2) Even if you have a clk pointer, it may be "orphaned" at the  time of
> > registration and so calling the APIs here works now but  eventually we may
> > want to return an EPROBE_DEFER error in that  case and this may block that
> > effort.
> > 
> > I suppose if this is the only clk driver on this machine then this last point isn't a
> > concern and things are probably ok here.
> > 
> 
> Using raw register writing has an issue.  The register is modified, but it seems the clock 'parent-child' relationship can 
> not match the register setting. The register setting is not bypass the pll, but in debug 'clk_summary', the
> pll is bypassed.  

So program the register settings before registering the clocks
with the framework?
diff mbox

Patch

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 1ada68a..9fb8e1f 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -21,6 +21,7 @@  obj-$(CONFIG_SOC_IMX35)  += clk-imx35.o
 obj-$(CONFIG_SOC_IMX5)   += clk-imx51-imx53.o
 obj-$(CONFIG_SOC_IMX6Q)  += clk-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o
 obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D)  += clk-imx7d.o
diff --git a/drivers/clk/imx/clk-imx6sll.c b/drivers/clk/imx/clk-imx6sll.c
new file mode 100644
index 0000000..c5219e1
--- /dev/null
+++ b/drivers/clk/imx/clk-imx6sll.c
@@ -0,0 +1,366 @@ 
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/types.h>
+
+#include "clk.h"
+
+#define BM_CCM_CCDR_MMDC_CH0_MASK	(0x2 << 16)
+#define CCDR	0x4
+
+static const char *pll_bypass_src_sels[] = { "osc", "dummy", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *axi_sels[] = {"periph", "axi_alt_sel", };
+static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
+static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *ssi_sels[] = {"pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", "dummy",};
+static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
+static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", };
+static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", };
+static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
+static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
+static const char *ecspi_sels[] = { "pll3_60m", "osc", };
+static const char *uart_sels[] = { "pll3_80m", "osc", };
+static const char *perclk_sels[] = { "ipg", "osc", };
+static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+
+static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
+static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+
+static struct clk *clks[IMX6SLL_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static int const clks_init_on[] __initconst = {
+	IMX6SLL_CLK_AIPSTZ1, IMX6SLL_CLK_AIPSTZ2,
+	IMX6SLL_CLK_OCRAM, IMX6SLL_CLK_ARM, IMX6SLL_CLK_ROM,
+	IMX6SLL_CLK_MMDC_P0_FAST, IMX6SLL_CLK_MMDC_P0_IPG,
+};
+
+static struct clk_div_table post_div_table[] = {
+	{ .val = 2, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 0, .div = 4, },
+	{ }
+};
+
+static struct clk_div_table video_div_table[] = {
+	{ .val = 0, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 2, .div = 1, },
+	{ .val = 3, .div = 4, },
+	{ }
+};
+
+static u32 share_count_audio;
+static u32 share_count_ssi1;
+static u32 share_count_ssi2;
+static u32 share_count_ssi3;
+
+static void __init imx6sll_clocks_init(struct device_node *ccm_node)
+{
+	struct device_node *np;
+	void __iomem *base;
+	int i;
+
+	clks[IMX6SLL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+
+	clks[IMX6SLL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
+	clks[IMX6SLL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
+
+	/* ipp_di clock is external input */
+	clks[IMX6SLL_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
+	clks[IMX6SLL_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sll-anatop");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	clks[IMX6SLL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clks[IMX6SLL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clks[IMX6SLL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clks[IMX6SLL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clks[IMX6SLL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clks[IMX6SLL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clks[IMX6SLL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+	clks[IMX6SLL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS,	 "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
+	clks[IMX6SLL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
+	clks[IMX6SLL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB,	 "pll3", "pll3_bypass_src", base + 0x10, 0x3);
+	clks[IMX6SLL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV,	 "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
+	clks[IMX6SLL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV,	 "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
+	clks[IMX6SLL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET,	 "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
+	clks[IMX6SLL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB,	 "pll7", "pll7_bypass_src", base + 0x20, 0x3);
+
+	clks[IMX6SLL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SLL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SLL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SLL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SLL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SLL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+	clks[IMX6SLL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+	/* Do not bypass PLLs initially */
+	clk_set_parent(clks[IMX6SLL_PLL1_BYPASS], clks[IMX6SLL_CLK_PLL1]);
+	clk_set_parent(clks[IMX6SLL_PLL2_BYPASS], clks[IMX6SLL_CLK_PLL2]);
+	clk_set_parent(clks[IMX6SLL_PLL3_BYPASS], clks[IMX6SLL_CLK_PLL3]);
+	clk_set_parent(clks[IMX6SLL_PLL4_BYPASS], clks[IMX6SLL_CLK_PLL4]);
+	clk_set_parent(clks[IMX6SLL_PLL5_BYPASS], clks[IMX6SLL_CLK_PLL5]);
+	clk_set_parent(clks[IMX6SLL_PLL6_BYPASS], clks[IMX6SLL_CLK_PLL6]);
+	clk_set_parent(clks[IMX6SLL_PLL7_BYPASS], clks[IMX6SLL_CLK_PLL7]);
+
+	clks[IMX6SLL_CLK_PLL1_SYS]	= imx_clk_fixed_factor("pll1_sys",	"pll1_bypass", 1, 1);
+	clks[IMX6SLL_CLK_PLL2_BUS]	= imx_clk_gate("pll2_bus",		"pll2_bypass", base + 0x30, 13);
+	clks[IMX6SLL_CLK_PLL3_USB_OTG]	= imx_clk_gate("pll3_usb_otg",		"pll3_bypass", base + 0x10, 13);
+	clks[IMX6SLL_CLK_PLL4_AUDIO]	= imx_clk_gate("pll4_audio",		"pll4_bypass", base + 0x70, 13);
+	clks[IMX6SLL_CLK_PLL5_VIDEO]	= imx_clk_gate("pll5_video",		"pll5_bypass", base + 0xa0, 13);
+	clks[IMX6SLL_CLK_PLL6_ENET]	= imx_clk_gate("pll6_enet",		"pll6_bypass", base + 0xe0, 13);
+	clks[IMX6SLL_CLK_PLL7_USB_HOST]	= imx_clk_gate("pll7_usb_host",		"pll7_bypass", base + 0x20, 13);
+
+	/*
+	 * Bit 20 is the reserved and read-only bit, we do this only for:
+	 * - Do nothing for usbphy clk_enable/disable
+	 * - Keep refcount when do usbphy clk_enable/disable, in that case,
+	 * the clk framework many need to enable/disable usbphy's parent
+	 */
+	clks[IMX6SLL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg",  base + 0x10, 20);
+	clks[IMX6SLL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+	/*
+	 * usbphy*_gate needs to be on after system boots up, and software
+	 * never needs to control it anymore.
+	 */
+	clks[IMX6SLL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+	clks[IMX6SLL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+	/*					name		   parent_name	   reg		idx */
+	clks[IMX6SLL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",	   base + 0x100, 0);
+	clks[IMX6SLL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",	   base + 0x100, 1);
+	clks[IMX6SLL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus",	   base + 0x100, 2);
+	clks[IMX6SLL_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus",	   base + 0x100, 3);
+	clks[IMX6SLL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0,  0);
+	clks[IMX6SLL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0,  1);
+	clks[IMX6SLL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0,	 2);
+	clks[IMX6SLL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0,	 3);
+
+	clks[IMX6SLL_CLK_PLL4_POST_DIV]  = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
+		 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clks[IMX6SLL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div",
+		 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+	clks[IMX6SLL_CLK_PLL5_POST_DIV]  = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video",
+		 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clks[IMX6SLL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div",
+		 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
+	/*						   name		parent_name	 mult  div */
+	clks[IMX6SLL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1,	2);
+	clks[IMX6SLL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg",   1,    4);
+	clks[IMX6SLL_CLK_PLL3_80M]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 	6);
+	clks[IMX6SLL_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 	8);
+
+	np = ccm_node;
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	clks[IMX6SLL_CLK_STEP] 	 	  = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+	clks[IMX6SLL_CLK_PLL1_SW] 	  = imx_clk_mux_flags("pll1_sw",   base + 0x0c, 2,  1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0);
+	clks[IMX6SLL_CLK_AXI_ALT_SEL]	  = imx_clk_mux("axi_alt_sel",		base + 0x14, 7,  1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels));
+	clks[IMX6SLL_CLK_AXI_SEL] 	  = imx_clk_mux_flags("axi_sel", 	base + 0x14, 6,  1, axi_sels, ARRAY_SIZE(axi_sels), 0);
+	clks[IMX6SLL_CLK_PERIPH_PRE]	  = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+	clks[IMX6SLL_CLK_PERIPH2_PRE]	  = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
+	clks[IMX6SLL_CLK_PERIPH_CLK2_SEL]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+	clks[IMX6SLL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+	clks[IMX6SLL_CLK_USDHC2_SEL]	  = imx_clk_mux("usdhc2_sel",   base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+	clks[IMX6SLL_CLK_USDHC1_SEL]	  = imx_clk_mux("usdhc1_sel",   base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+	clks[IMX6SLL_CLK_USDHC3_SEL]	  = imx_clk_mux("usdhc3_sel",   base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+	clks[IMX6SLL_CLK_SSI1_SEL]	  = imx_clk_mux("ssi1_sel",     base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+	clks[IMX6SLL_CLK_SSI2_SEL]	  = imx_clk_mux("ssi2_sel",     base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+	clks[IMX6SLL_CLK_SSI3_SEL]	  = imx_clk_mux("ssi3_sel",     base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+	clks[IMX6SLL_CLK_PERCLK_SEL] 	  = imx_clk_mux("perclk_sel",	base + 0x1c, 6,  1, perclk_sels, ARRAY_SIZE(perclk_sels));
+	clks[IMX6SLL_CLK_UART_SEL]	  = imx_clk_mux("uart_sel",	base + 0x24, 6,  1, uart_sels, ARRAY_SIZE(uart_sels));
+	clks[IMX6SLL_CLK_SPDIF_SEL]	  = imx_clk_mux("spdif_sel",	base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels));
+	clks[IMX6SLL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel",   base + 0x30, 7,  2, spdif_sels, ARRAY_SIZE(spdif_sels));
+	clks[IMX6SLL_CLK_EPDC_PRE_SEL]	  = imx_clk_mux("epdc_pre_sel",	base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels));
+	clks[IMX6SLL_CLK_EPDC_SEL]	  = imx_clk_mux("epdc_sel",	base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels));
+	clks[IMX6SLL_CLK_ECSPI_SEL]	  = imx_clk_mux("ecspi_sel",	base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
+	clks[IMX6SLL_CLK_LCDIF_PRE_SEL]	  = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels));
+	clks[IMX6SLL_CLK_LCDIF_SEL]	  = imx_clk_mux("lcdif_sel", 	base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
+
+	clks[IMX6SLL_CLK_PERIPH]  = imx_clk_busy_mux("periph",  base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+	clks[IMX6SLL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+
+	clks[IMX6SLL_CLK_PERIPH_CLK2]	= imx_clk_divider("periph_clk2",   "periph_clk2_sel",  	base + 0x14, 27, 3);
+	clks[IMX6SLL_CLK_PERIPH2_CLK2]	= imx_clk_divider("periph2_clk2",  "periph2_clk2_sel", 	base + 0x14, 0,  3);
+	clks[IMX6SLL_CLK_IPG]		= imx_clk_divider("ipg",	   "ahb",		base + 0x14, 8,	 2);
+	clks[IMX6SLL_CLK_LCDIF_PODF]	= imx_clk_divider("lcdif_podf",	   "lcdif_pred",	base + 0x18, 23, 3);
+	clks[IMX6SLL_CLK_PERCLK]	= imx_clk_divider("perclk",	   "perclk_sel",	base + 0x1c, 0,  6);
+	clks[IMX6SLL_CLK_USDHC3_PODF]   = imx_clk_divider("usdhc3_podf",   "usdhc3_sel",	base + 0x24, 19, 3);
+	clks[IMX6SLL_CLK_USDHC2_PODF]	= imx_clk_divider("usdhc2_podf",   "usdhc2_sel",	base + 0x24, 16, 3);
+	clks[IMX6SLL_CLK_USDHC1_PODF]	= imx_clk_divider("usdhc1_podf",   "usdhc1_sel",	base + 0x24, 11, 3);
+	clks[IMX6SLL_CLK_UART_PODF]	= imx_clk_divider("uart_podf",	   "uart_sel",		base + 0x24, 0,  6);
+	clks[IMX6SLL_CLK_SSI3_PRED]	= imx_clk_divider("ssi3_pred",	   "ssi3_sel",		base + 0x28, 22, 3);
+	clks[IMX6SLL_CLK_SSI3_PODF]	= imx_clk_divider("ssi3_podf",	   "ssi3_pred",		base + 0x28, 16, 6);
+	clks[IMX6SLL_CLK_SSI1_PRED]	= imx_clk_divider("ssi1_pred",	   "ssi1_sel",		base + 0x28, 6,	 3);
+	clks[IMX6SLL_CLK_SSI1_PODF]	= imx_clk_divider("ssi1_podf",	   "ssi1_pred",		base + 0x28, 0,	 6);
+	clks[IMX6SLL_CLK_SSI2_PRED]	= imx_clk_divider("ssi2_pred",	   "ssi2_sel",		base + 0x2c, 6,	 3);
+	clks[IMX6SLL_CLK_SSI2_PODF]	= imx_clk_divider("ssi2_podf",	   "ssi2_pred",		base + 0x2c, 0,  6);
+	clks[IMX6SLL_CLK_SPDIF_PRED]	= imx_clk_divider("spdif_pred",	   "spdif_sel",		base + 0x30, 25, 3);
+	clks[IMX6SLL_CLK_SPDIF_PODF]	= imx_clk_divider("spdif_podf",	   "spdif_pred",	base + 0x30, 22, 3);
+	clks[IMX6SLL_CLK_EXTERN_AUDIO_PRED]   = imx_clk_divider("extern_audio_pred",   "extern_audio_sel",        base + 0x30, 12, 3);
+	clks[IMX6SLL_CLK_EXTERN_AUDIO_PODF]   = imx_clk_divider("extern_audio_podf",   "extern_audio_pred",       base + 0x30, 9,  3);
+	clks[IMX6SLL_CLK_EPDC_PODF]	= imx_clk_divider("epdc_podf",	   "epdc_pre_sel",	base + 0x34, 12, 3);
+	clks[IMX6SLL_CLK_ECSPI_PODF]	= imx_clk_divider("ecspi_podf",	   "ecspi_sel",		base + 0x38, 19, 6);
+	clks[IMX6SLL_CLK_LCDIF_PRED]	= imx_clk_divider("lcdif_pred",	   "lcdif_pre_sel",	base + 0x38, 12, 3);
+
+	clks[IMX6SLL_CLK_ARM]		= imx_clk_busy_divider("arm", 	    "pll1_sw",	base +	0x10, 0,  3,  base + 0x48, 16);
+	clks[IMX6SLL_CLK_MMDC_PODF]	= imx_clk_busy_divider("mmdc_podf", "periph2",	base +  0x14, 3,  3,  base + 0x48, 2);
+	clks[IMX6SLL_CLK_AXI_PODF]	= imx_clk_busy_divider("axi",       "axi_sel",	base +  0x14, 16, 3,  base + 0x48, 0);
+	clks[IMX6SLL_CLK_AHB]		= imx_clk_busy_divider("ahb",	    "periph",	base +  0x14, 10, 3,  base + 0x48, 1);
+
+	clks[IMX6SLL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clks[IMX6SLL_CLK_LDB_DI0_DIV_7]	  = imx_clk_fixed_factor("ldb_di0_div_7",   "ldb_di0_sel", 1, 7);
+	clks[IMX6SLL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clks[IMX6SLL_CLK_LDB_DI1_DIV_7]	  = imx_clk_fixed_factor("ldb_di1_div_7",   "ldb_di1_sel", 1, 7);
+
+	clks[IMX6SLL_CLK_LDB_DI0_SEL]	= imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels));
+	clks[IMX6SLL_CLK_LDB_DI1_SEL]   = imx_clk_mux("ldb_di1_sel", base + 0x1c, 7, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels));
+	clks[IMX6SLL_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels));
+	clks[IMX6SLL_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux("ldb_di1_div_sel", base + 0x20, 10, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels));
+
+	/* CCGR0 */
+	clks[IMX6SLL_CLK_AIPSTZ1]	= imx_clk_gate2("aips_tz1", 	"ahb",		base + 0x68,	0);
+	clks[IMX6SLL_CLK_AIPSTZ2]	= imx_clk_gate2("aips_tz2", 	"ahb",		base + 0x68,	2);
+	clks[IMX6SLL_CLK_DCP]		= imx_clk_gate2("dcp",		"ahb",		base + 0x68,	10);
+	clks[IMX6SLL_CLK_UART2_IPG]	= imx_clk_gate2("uart2_ipg",	"ipg",		base + 0x68,	28);
+	clks[IMX6SLL_CLK_UART2_SERIAL]	= imx_clk_gate2("uart2_serial",	"uart_podf",	base + 0x68,	28);
+
+	/* CCGR1 */
+	clks[IMX6SLL_CLK_ECSPI1]	= imx_clk_gate2("ecspi1",	"ecspi_podf",	base + 0x6c,	0);
+	clks[IMX6SLL_CLK_ECSPI2]	= imx_clk_gate2("ecspi2",	"ecspi_podf",	base + 0x6c,	2);
+	clks[IMX6SLL_CLK_ECSPI3]	= imx_clk_gate2("ecspi3",	"ecspi_podf",	base + 0x6c,	4);
+	clks[IMX6SLL_CLK_ECSPI4]	= imx_clk_gate2("ecspi4",	"ecspi_podf",	base + 0x6c,	6);
+	clks[IMX6SLL_CLK_UART3_IPG]	= imx_clk_gate2("uart3_ipg",	"ipg",		base + 0x6c,	10);
+	clks[IMX6SLL_CLK_UART3_SERIAL]	= imx_clk_gate2("uart3_serial",	"uart_podf",	base + 0x6c,	10);
+	clks[IMX6SLL_CLK_EPIT1]		= imx_clk_gate2("epit1",	"perclk",	base + 0x6c,	12);
+	clks[IMX6SLL_CLK_EPIT2]		= imx_clk_gate2("epit2",	"perclk",	base + 0x6c,	14);
+	clks[IMX6SLL_CLK_GPT_BUS]	= imx_clk_gate2("gpt1_bus",	"perclk",	base + 0x6c,	20);
+	clks[IMX6SLL_CLK_GPT_SERIAL]	= imx_clk_gate2("gpt1_serial",	"perclk",	base + 0x6c,	22);
+	clks[IMX6SLL_CLK_UART4_IPG]	= imx_clk_gate2("uart4_ipg",	"ipg",		base + 0x6c,	24);
+	clks[IMX6SLL_CLK_UART4_SERIAL]	= imx_clk_gate2("uart4_serail",	"uart_podf",	base + 0x6c,	24);
+
+	/* CCGR2 */
+	clks[IMX6SLL_CLK_CSI]		= imx_clk_gate2("csi",		"axi",		base + 0x70,	2);
+	clks[IMX6SLL_CLK_I2C1]		= imx_clk_gate2("i2c1",		"perclk",	base + 0x70,	6);
+	clks[IMX6SLL_CLK_I2C2]		= imx_clk_gate2("i2c2",		"perclk",	base + 0x70,	8);
+	clks[IMX6SLL_CLK_I2C3]		= imx_clk_gate2("i2c3",		"perclk",	base + 0x70,	10);
+	clks[IMX6SLL_CLK_OCOTP]		= imx_clk_gate2("ocotp",	"ipg",		base + 0x70,	12);
+	clks[IMX6SLL_CLK_LCDIF_APB]	= imx_clk_gate2("lcdif_apb",	"axi",		base + 0x70,	28);
+	clks[IMX6SLL_CLK_PXP]		= imx_clk_gate2("pxp",		"axi",		base + 0x70,	30);
+
+	/* CCGR3 */
+	clks[IMX6SLL_CLK_UART5_IPG]	= imx_clk_gate2("uart5_ipg",	"ipg",		base + 0x74,	2);
+	clks[IMX6SLL_CLK_UART5_SERIAL]	= imx_clk_gate2("uart5_serial",	"uart_podf",	base + 0x74,	2);
+	clks[IMX6SLL_CLK_EPDC_AXI]	= imx_clk_gate2("epdc_aclk",	"axi",		base + 0x74,	4);
+	clks[IMX6SLL_CLK_EPDC_PIX]	= imx_clk_gate2("epdc_pix",	"epdc_podf",	base + 0x74,	4);
+	clks[IMX6SLL_CLK_LCDIF_PIX]	= imx_clk_gate2("lcdif_pix",	"lcdif_podf",	base + 0x74,	10);
+	clks[IMX6SLL_CLK_WDOG1]		= imx_clk_gate2("wdog1",	"ipg",		base + 0x74,	16);
+	clks[IMX6SLL_CLK_MMDC_P0_FAST]	= imx_clk_gate("mmdc_p0_fast",  "mmdc_podf",	base + 0x74,	20);
+	clks[IMX6SLL_CLK_MMDC_P0_IPG]	= imx_clk_gate2("mmdc_p0_ipg",	"ipg",		base + 0x74,	24);
+	clks[IMX6SLL_CLK_OCRAM]		= imx_clk_gate("ocram",		"ahb",		base + 0x74,	28);
+
+	/* CCGR4 */
+	clks[IMX6SLL_CLK_PWM1]		= imx_clk_gate2("pwm1",		"perclk",	base + 0x78,	16);
+	clks[IMX6SLL_CLK_PWM2]		= imx_clk_gate2("pwm2",		"perclk",	base + 0x78,	18);
+	clks[IMX6SLL_CLK_PWM3]		= imx_clk_gate2("pwm3",		"perclk",	base + 0x78,	20);
+	clks[IMX6SLL_CLK_PWM4]		= imx_clk_gate2("pwm4",		"perclk",	base + 0x78,	22);
+
+	/* CCGR5 */
+	clks[IMX6SLL_CLK_ROM]		= imx_clk_gate2("rom",		"ahb",		base + 0x7c,	0);
+	clks[IMX6SLL_CLK_SDMA]		= imx_clk_gate2("sdma",		"ahb",		base + 0x7c,	6);
+	clks[IMX6SLL_CLK_WDOG2]		= imx_clk_gate2("wdog2",	"ipg",		base + 0x7c,	10);
+	clks[IMX6SLL_CLK_SPBA]		= imx_clk_gate2("spba",		"ipg",		base + 0x7c,	12);
+	clks[IMX6SLL_CLK_EXTERN_AUDIO]	= imx_clk_gate2_shared("extern_audio",	"extern_audio_podf",	base + 0x7c,	14, &share_count_audio);
+	clks[IMX6SLL_CLK_SPDIF]		= imx_clk_gate2_shared("spdif",		"spdif_podf",	base + 0x7c,	14, &share_count_audio);
+	clks[IMX6SLL_CLK_SPDIF_GCLK]	= imx_clk_gate2_shared("spdif_gclk",	"ipg",		base + 0x7c,	14, &share_count_audio);
+	clks[IMX6SLL_CLK_SSI1]		= imx_clk_gate2_shared("ssi1",		"ssi1_podf",	base + 0x7c, 	18, &share_count_ssi1);
+	clks[IMX6SLL_CLK_SSI1_IPG]	= imx_clk_gate2_shared("ssi1_ipg",	"ipg",		base + 0x7c, 	18, &share_count_ssi1);
+	clks[IMX6SLL_CLK_SSI2]		= imx_clk_gate2_shared("ssi2",		"ssi2_podf",	base + 0x7c, 	20, &share_count_ssi2);
+	clks[IMX6SLL_CLK_SSI2_IPG]	= imx_clk_gate2_shared("ssi2_ipg",	"ipg",		base + 0x7c, 	20, &share_count_ssi2);
+	clks[IMX6SLL_CLK_SSI3]		= imx_clk_gate2_shared("ssi3",		"ssi3_podf",	base + 0x7c, 	22, &share_count_ssi3);
+	clks[IMX6SLL_CLK_SSI3_IPG]	= imx_clk_gate2_shared("ssi3_ipg",	"ipg",		base + 0x7c, 	22, &share_count_ssi3);
+	clks[IMX6SLL_CLK_UART1_IPG]	= imx_clk_gate2("uart1_ipg",	"ipg",		base + 0x7c,	24);
+	clks[IMX6SLL_CLK_UART1_SERIAL]	= imx_clk_gate2("uart1_serial",	"uart_podf",	base + 0x7c,	24);
+
+	/* CCGR6 */
+	clks[IMX6SLL_CLK_USBOH3]	= imx_clk_gate2("usboh3",	"ipg",		 base + 0x80,	0);
+	clks[IMX6SLL_CLK_USDHC1]	= imx_clk_gate2("usdhc1",	"usdhc1_podf",	 base + 0x80,	2);
+	clks[IMX6SLL_CLK_USDHC2]	= imx_clk_gate2("usdhc2",	"usdhc2_podf",	 base + 0x80,	4);
+	clks[IMX6SLL_CLK_USDHC3]	= imx_clk_gate2("usdhc3",	"usdhc3_podf",	 base + 0x80,	6);
+
+	/* mask handshake of mmdc */
+	writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		if (IS_ERR(clks[i]))
+			pr_err("i.MX6SLL clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+
+	clk_data.clks = clks;
+	clk_data.clk_num = ARRAY_SIZE(clks);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	/* set perclk to from OSC */
+	clk_set_parent(clks[IMX6SLL_CLK_PERCLK_SEL], clks[IMX6SLL_CLK_OSC]);
+
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+
+	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+		clk_prepare_enable(clks[IMX6SLL_CLK_USBPHY1_GATE]);
+		clk_prepare_enable(clks[IMX6SLL_CLK_USBPHY2_GATE]);
+	}
+
+	/* Lower the AHB clock rate before changing the clock source. */
+	clk_set_rate(clks[IMX6SLL_CLK_AHB], 99000000);
+
+	/* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */
+	clk_set_parent(clks[IMX6SLL_CLK_PERIPH_CLK2_SEL], clks[IMX6SLL_CLK_PLL3_USB_OTG]);
+	clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_CLK2]);
+	clk_set_parent(clks[IMX6SLL_CLK_PERIPH_PRE], clks[IMX6SLL_CLK_PLL2_BUS]);
+	clk_set_parent(clks[IMX6SLL_CLK_PERIPH], clks[IMX6SLL_CLK_PERIPH_PRE]);
+
+	clk_set_rate(clks[IMX6SLL_CLK_AHB], 132000000);
+}
+
+CLK_OF_DECLARE(imx6sll, "fsl,imx6sll-ccm", imx6sll_clocks_init);
+
diff --git a/include/dt-bindings/clock/imx6sll-clock.h b/include/dt-bindings/clock/imx6sll-clock.h
new file mode 100644
index 0000000..39c2567
--- /dev/null
+++ b/include/dt-bindings/clock/imx6sll-clock.h
@@ -0,0 +1,204 @@ 
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6SLL_H
+#define __DT_BINDINGS_CLOCK_IMX6SLL_H
+
+#define IMX6SLL_CLK_DUMMY		0
+#define IMX6SLL_CLK_CKIL		1
+#define IMX6SLL_CLK_OSC			2
+#define IMX6SLL_PLL1_BYPASS_SRC		3
+#define IMX6SLL_PLL2_BYPASS_SRC		4
+#define IMX6SLL_PLL3_BYPASS_SRC		5
+#define IMX6SLL_PLL4_BYPASS_SRC		6
+#define IMX6SLL_PLL5_BYPASS_SRC		7
+#define IMX6SLL_PLL6_BYPASS_SRC		8
+#define IMX6SLL_PLL7_BYPASS_SRC		9
+#define IMX6SLL_CLK_PLL1		10
+#define IMX6SLL_CLK_PLL2		11
+#define IMX6SLL_CLK_PLL3		12
+#define IMX6SLL_CLK_PLL4		13
+#define IMX6SLL_CLK_PLL5		14
+#define IMX6SLL_CLK_PLL6		15
+#define IMX6SLL_CLK_PLL7		16
+#define IMX6SLL_PLL1_BYPASS		17
+#define IMX6SLL_PLL2_BYPASS		18
+#define IMX6SLL_PLL3_BYPASS		19
+#define IMX6SLL_PLL4_BYPASS		20
+#define IMX6SLL_PLL5_BYPASS		21
+#define IMX6SLL_PLL6_BYPASS		22
+#define IMX6SLL_PLL7_BYPASS		23
+#define IMX6SLL_CLK_PLL1_SYS		24
+#define IMX6SLL_CLK_PLL2_BUS		25
+#define IMX6SLL_CLK_PLL3_USB_OTG	26
+#define IMX6SLL_CLK_PLL4_AUDIO		27
+#define IMX6SLL_CLK_PLL5_VIDEO		28
+#define IMX6SLL_CLK_PLL6_ENET		29
+#define IMX6SLL_CLK_PLL7_USB_HOST	30
+#define IMX6SLL_CLK_USBPHY1		31
+#define IMX6SLL_CLK_USBPHY2		32
+#define IMX6SLL_CLK_USBPHY1_GATE	33
+#define IMX6SLL_CLK_USBPHY2_GATE	34
+#define IMX6SLL_CLK_PLL2_PFD0		35
+#define IMX6SLL_CLK_PLL2_PFD1		36
+#define IMX6SLL_CLK_PLL2_PFD2		37
+#define IMX6SLL_CLK_PLL2_PFD3		38
+#define IMX6SLL_CLK_PLL3_PFD0		39
+#define IMX6SLL_CLK_PLL3_PFD1		40
+#define IMX6SLL_CLK_PLL3_PFD2		41
+#define IMX6SLL_CLK_PLL3_PFD3		42
+#define IMX6SLL_CLK_PLL4_POST_DIV	43
+#define IMX6SLL_CLK_PLL4_AUDIO_DIV	44
+#define IMX6SLL_CLK_PLL5_POST_DIV	45
+#define IMX6SLL_CLK_PLL5_VIDEO_DIV	46
+#define IMX6SLL_CLK_PLL2_198M		47
+#define IMX6SLL_CLK_PLL3_120M		48
+#define IMX6SLL_CLK_PLL3_80M		49
+#define IMX6SLL_CLK_PLL3_60M		50
+#define IMX6SLL_CLK_STEP		51
+#define IMX6SLL_CLK_PLL1_SW		52
+#define IMX6SLL_CLK_AXI_ALT_SEL		53
+#define IMX6SLL_CLK_AXI_SEL		54
+#define IMX6SLL_CLK_PERIPH_PRE		55
+#define IMX6SLL_CLK_PERIPH2_PRE		56
+#define IMX6SLL_CLK_PERIPH_CLK2_SEL	57
+#define IMX6SLL_CLK_PERIPH2_CLK2_SEL	58
+#define IMX6SLL_CLK_PERCLK_SEL		59
+#define IMX6SLL_CLK_USDHC1_SEL		60
+#define IMX6SLL_CLK_USDHC2_SEL		61
+#define IMX6SLL_CLK_USDHC3_SEL		62
+#define IMX6SLL_CLK_SSI1_SEL		63
+#define IMX6SLL_CLK_SSI2_SEL		64
+#define IMX6SLL_CLK_SSI3_SEL		65
+#define IMX6SLL_CLK_PXP_SEL		66
+#define IMX6SLL_CLK_LCDIF_PRE_SEL	67
+#define IMX6SLL_CLK_LCDIF_SEL		68
+#define IMX6SLL_CLK_EPDC_PRE_SEL	69
+#define IMX6SLL_CLK_SPDIF_SEL		70
+#define IMX6SLL_CLK_ECSPI_SEL		71
+#define IMX6SLL_CLK_UART_SEL		72
+#define IMX6SLL_CLK_ARM			73
+#define IMX6SLL_CLK_PERIPH		74
+#define IMX6SLL_CLK_PERIPH2		75
+#define IMX6SLL_CLK_PERIPH2_CLK2	76
+#define IMX6SLL_CLK_PERIPH_CLK2		77
+#define IMX6SLL_CLK_MMDC_PODF		78
+#define IMX6SLL_CLK_AXI_PODF		79
+#define IMX6SLL_CLK_AHB			80
+#define IMX6SLL_CLK_IPG			81
+#define IMX6SLL_CLK_PERCLK		82
+#define IMX6SLL_CLK_USDHC1_PODF		83
+#define IMX6SLL_CLK_USDHC2_PODF		84
+#define IMX6SLL_CLK_USDHC3_PODF		85
+#define IMX6SLL_CLK_SSI1_PRED		86
+#define IMX6SLL_CLK_SSI2_PRED		87
+#define IMX6SLL_CLK_SSI3_PRED		88
+#define IMX6SLL_CLK_SSI1_PODF		89
+#define IMX6SLL_CLK_SSI2_PODF		90
+#define IMX6SLL_CLK_SSI3_PODF		91
+#define IMX6SLL_CLK_PXP_PODF		92
+#define IMX6SLL_CLK_LCDIF_PRED		93
+#define IMX6SLL_CLK_LCDIF_PODF		94
+#define IMX6SLL_CLK_EPDC_SEL		95
+#define IMX6SLL_CLK_EPDC_PODF		96
+#define IMX6SLL_CLK_SPDIF_PRED		97
+#define IMX6SLL_CLK_SPDIF_PODF		98
+#define IMX6SLL_CLK_ECSPI_PODF		99
+#define IMX6SLL_CLK_UART_PODF		100
+
+/* CCGR 0 */
+#define IMX6SLL_CLK_AIPSTZ1		101
+#define IMX6SLL_CLK_AIPSTZ2		102
+#define IMX6SLL_CLK_DCP			103
+#define IMX6SLL_CLK_UART2_IPG		104
+#define IMX6SLL_CLK_UART2_SERIAL	105
+
+/* CCGR 1 */
+#define IMX6SLL_CLK_ECSPI1		106
+#define IMX6SLL_CLK_ECSPI2		107
+#define IMX6SLL_CLK_ECSPI3		108
+#define IMX6SLL_CLK_ECSPI4		109
+#define IMX6SLL_CLK_UART3_IPG		110
+#define IMX6SLL_CLK_UART3_SERIAL	111
+#define IMX6SLL_CLK_UART4_IPG		112
+#define IMX6SLL_CLK_UART4_SERIAL	113
+#define IMX6SLL_CLK_EPIT1		114
+#define IMX6SLL_CLK_EPIT2		115
+#define IMX6SLL_CLK_GPT_BUS		116
+#define IMX6SLL_CLK_GPT_SERIAL		117
+
+/* CCGR2 */
+#define IMX6SLL_CLK_CSI			118
+#define IMX6SLL_CLK_I2C1		119
+#define IMX6SLL_CLK_I2C2		120
+#define IMX6SLL_CLK_I2C3		121
+#define IMX6SLL_CLK_OCOTP		122
+#define IMX6SLL_CLK_LCDIF_APB		123
+#define IMX6SLL_CLK_PXP			124
+
+/* CCGR3 */
+#define IMX6SLL_CLK_UART5_IPG		125
+#define IMX6SLL_CLK_UART5_SERIAL	126
+#define IMX6SLL_CLK_EPDC_AXI		127
+#define IMX6SLL_CLK_EPDC_PIX		128
+#define IMX6SLL_CLK_LCDIF_PIX		129
+#define IMX6SLL_CLK_WDOG1		130
+#define IMX6SLL_CLK_MMDC_P0_FAST	131
+#define IMX6SLL_CLK_MMDC_P0_IPG		132
+#define IMX6SLL_CLK_OCRAM		133
+
+/* CCGR4 */
+#define IMX6SLL_CLK_PWM1		134
+#define IMX6SLL_CLK_PWM2		135
+#define IMX6SLL_CLK_PWM3		136
+#define IMX6SLL_CLK_PWM4		137
+
+/* CCGR 5 */
+#define IMX6SLL_CLK_ROM			138
+#define IMX6SLL_CLK_SDMA		139
+#define IMX6SLL_CLK_KPP			140
+#define IMX6SLL_CLK_WDOG2		141
+#define IMX6SLL_CLK_SPBA		142
+#define IMX6SLL_CLK_SPDIF		143
+#define IMX6SLL_CLK_SPDIF_GCLK		144
+#define IMX6SLL_CLK_SSI1		145
+#define IMX6SLL_CLK_SSI1_IPG		146
+#define IMX6SLL_CLK_SSI2		147
+#define IMX6SLL_CLK_SSI2_IPG		148
+#define IMX6SLL_CLK_SSI3		149
+#define IMX6SLL_CLK_SSI3_IPG		150
+#define IMX6SLL_CLK_UART1_IPG		151
+#define IMX6SLL_CLK_UART1_SERIAL	152
+
+/* CCGR 6 */
+#define IMX6SLL_CLK_USBOH3		153
+#define IMX6SLL_CLK_USDHC1		154
+#define IMX6SLL_CLK_USDHC2		155
+#define IMX6SLL_CLK_USDHC3		156
+
+#define IMX6SLL_CLK_IPP_DI0		157
+#define IMX6SLL_CLK_IPP_DI1		158
+#define IMX6SLL_CLK_LDB_DI0_SEL		159
+#define IMX6SLL_CLK_LDB_DI0_DIV_3_5	160
+#define IMX6SLL_CLK_LDB_DI0_DIV_7	161
+#define IMX6SLL_CLK_LDB_DI0_DIV_SEL	162
+#define IMX6SLL_CLK_LDB_DI0		163
+#define IMX6SLL_CLK_LDB_DI1_SEL		164
+#define IMX6SLL_CLK_LDB_DI1_DIV_3_5	165
+#define IMX6SLL_CLK_LDB_DI1_DIV_7	166
+#define IMX6SLL_CLK_LDB_DI1_DIV_SEL	167
+#define IMX6SLL_CLK_LDB_DI1		168
+#define IMX6SLL_CLK_EXTERN_AUDIO_SEL    169
+#define IMX6SLL_CLK_EXTERN_AUDIO_PRED   170
+#define IMX6SLL_CLK_EXTERN_AUDIO_PODF   171
+#define IMX6SLL_CLK_EXTERN_AUDIO        172
+
+#define IMX6SLL_CLK_END			173
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6SLL_H */