| Message ID | 20170103112247.4563-3-gary.bisson@boundarydevices.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Shawn, On Tue, Jan 03, 2017 at 12:22:47PM +0100, Gary Bisson wrote: > Since the codec is probed first, the pinctrl node should be > under the codec node. > > The codec init was working for this board since U-Boot was > already setting GPIO_0 as CLKO1 but better fix it anyway. > > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Thanks, Gary
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index d80f21abea62..31d4cc62dbc7 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -250,8 +250,6 @@ compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_som2-sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -320,6 +318,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>;
Since the codec is probed first, the pinctrl node should be under the codec node. The codec init was working for this board since U-Boot was already setting GPIO_0 as CLKO1 but better fix it anyway. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)