[v4,2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other

Message ID	20170106114114.19321-3-andi.shyti@samsung.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Andi Shyti <andi.shyti@samsung.com> To: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com>, Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, Javier Martinez Canillas <javier@osg.samsung.com>, Chanwoo Choi <cw00.choi@samsung.com>, Beomho Seo <beomho.seo@samsung.com> Subject: [PATCH v4 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Date: Fri, 06 Jan 2017 20:41:11 +0900 Message-id: <20170106114114.19321-3-andi.shyti@samsung.com> In-reply-to: <20170106114114.19321-1-andi.shyti@samsung.com> CMS-TYPE: 105P DLP-Filter: Pass References: <20170106114114.19321-1-andi.shyti@samsung.com> <CGME20170106114120epcas5p2dde13ec37b7e53f65b6899da9e7c7e60@epcas5p2.samsung.com> Precedence: list Cc: devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, Jaechul Lee <jcsing.lee@samsung.com>, linux-kernel@vger.kernel.org, Andi Shyti <andi.shyti@samsung.com>, Andi Shyti <andi@etezian.org>, linux-input@vger.kernel.org, Jaechul Lee <galaxyra@gmail.com>, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi similarity index 98% copy from arch/arm64/boot/dts/exynos/exynos5433-tm2.dts copy to arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index e8971f4a5977..c43f9a38adf6 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -3,8 +3,8 @@ * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * - * Device tree source file for Samsung's TM2 board which is based on - * Samsung Exynos5433 SoC. + * Common device tree source file for Samsung's TM2 and TM2E boards + * which are based on Samsung Exynos5433 SoC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -322,7 +322,7 @@ "s2mps13_bt"; }; - regulators { + regulators: regulators { ldo1_reg: LDO1 { regulator-name = "VDD_ALIVE_0.9V_AP"; regulator-min-microvolt = <900000>; @@ -552,11 +552,10 @@ regulator-max-microvolt = <3300000>; }; - ldo31_reg: LDO31 { - regulator-name = "TSP_VDD_1.85V_AP"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - }; + /* + * LDO31 differs from target to target, + * its definition is in the .dts + */ ldo32_reg: LDO32 { regulator-name = "VTOUCH_1.8V_AP"; @@ -595,11 +594,10 @@ regulator-max-microvolt = <1800000>; }; - ldo38_reg: LDO38 { - regulator-name = "VCC_3.0V_MOTOR_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; + /* + * LDO38 differs from target to target, + * its definition is in the .dts + */ ldo39_reg: LDO39 { regulator-name = "V_HRM_1.8V"; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts dissimilarity index 98% index e8971f4a5977..d30b45a9c0d4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -1,1120 +1,33 @@ -/* - * SAMSUNG Exynos5433 TM2 board device tree source - * - * Copyright (c) 2016 Samsung Electronics Co., Ltd. - * - * Device tree source file for Samsung's TM2 board which is based on - * Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/dts-v1/; -#include "exynos5433.dtsi" -#include <dt-bindings/clock/samsung,s2mps11.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Samsung TM2 board"; - compatible = "samsung,tm2", "samsung,exynos5433"; - - aliases { - gsc0 = &gsc_0; - gsc1 = &gsc_1; - gsc2 = &gsc_2; - pinctrl0 = &pinctrl_alive; - pinctrl1 = &pinctrl_aud; - pinctrl2 = &pinctrl_cpif; - pinctrl3 = &pinctrl_ese; - pinctrl4 = &pinctrl_finger; - pinctrl5 = &pinctrl_fsys; - pinctrl6 = &pinctrl_imem; - pinctrl7 = &pinctrl_nfc; - pinctrl8 = &pinctrl_peric; - pinctrl9 = &pinctrl_touch; - serial0 = &serial_0; - serial1 = &serial_1; - serial2 = &serial_2; - serial3 = &serial_3; - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; - spi3 = &spi_3; - spi4 = &spi_4; - mshc0 = &mshc_0; - mshc2 = &mshc_2; - }; - - chosen { - stdout-path = &serial_1; - }; - - memory@20000000 { - device_type = "memory"; - reg = <0x0 0x20000000 0x0 0xc0000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "power key"; - debounce-interval = <10>; - }; - - volume-up-key { - gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - label = "volume-up key"; - debounce-interval = <10>; - }; - - volume-down-key { - gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - label = "volume-down key"; - debounce-interval = <10>; - }; - - homepage-key { - gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_MENU>; - label = "homepage key"; - debounce-interval = <10>; - }; - }; - - i2c_max98504: i2c-gpio-0 { - compatible = "i2c-gpio"; - gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ - &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max98504: max98504@31 { - compatible = "maxim,max98504"; - reg = <0x31>; - maxim,rx-path = <1>; - maxim,tx-path = <1>; - maxim,tx-channel-mask = <3>; - maxim,tx-channel-source = <2>; - }; - }; - - sound { - compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; - audio-amplifier = <&max98504>; - mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; - model = "wm5110"; - samsung,audio-routing = - /* Headphone */ - "HP", "HPOUT1L", - "HP", "HPOUT1R", - - /* Speaker */ - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - - /* Receiver */ - "RCV", "HPOUT3L", - "RCV", "HPOUT3R"; - status = "okay"; - }; -}; - -&adc { - vdd-supply = <&ldo3_reg>; - status = "okay"; - - thermistor-ap { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 0>; - }; - - thermistor-battery { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 1>; - #thermal-sensor-cells = <0>; - }; - - thermistor-charger { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 2>; - }; -}; - -&bus_g2d_400 { - devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; - vdd-supply = <&buck4_reg>; - exynos,saturation-ratio = <10>; - status = "okay"; -}; - -&bus_g2d_266 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_gscl { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_hevc { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_jpeg { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_mscl { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc0 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc1 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc2 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; -}; - -&cmu_fsys { - assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, - <&cmu_top CLK_MOUT_SCLK_USBHOST30>, - <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, - <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, - <&cmu_top CLK_DIV_SCLK_USBDRD30>, - <&cmu_top CLK_DIV_SCLK_USBHOST30>; - assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_SCLK_USBDRD30_FSYS>, - <&cmu_top CLK_SCLK_USBHOST30_FSYS>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; - assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, - <66700000>, <66700000>; -}; - -&cmu_gscl { - assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, - <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, - <&cmu_top CLK_ACLK_GSCL_333>; -}; - -&cmu_mfc { - assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; -}; - -&cmu_mscl { - assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG>, - <&cmu_top CLK_MOUT_SCLK_JPEG_A>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, - <&cmu_top CLK_SCLK_JPEG_MSCL>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>; -}; - -&cpu0 { - cpu-supply = <&buck3_reg>; -}; - -&cpu4 { - cpu-supply = <&buck2_reg>; -}; - -&decon { - status = "okay"; - - i80-if-timings { - }; -}; - -&dsi { - status = "okay"; - vddcore-supply = <&ldo6_reg>; - vddio-supply = <&ldo7_reg>; - samsung,pll-clock-frequency = <24000000>; - pinctrl-names = "default"; - pinctrl-0 = <&te_irq>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - samsung,burst-clock-frequency = <512000000>; - samsung,esc-clock-frequency = <16000000>; - }; - }; - }; -}; - -&hsi2c_0 { - status = "okay"; - clock-frequency = <2500000>; - - s2mps13-pmic@66 { - compatible = "samsung,s2mps13-pmic"; - interrupt-parent = <&gpa0>; - interrupts = <7 IRQ_TYPE_NONE>; - reg = <0x66>; - samsung,s2mps11-wrstbi-ground; - - s2mps13_osc: clocks { - compatible = "samsung,s2mps13-clk"; - #clock-cells = <1>; - clock-output-names = "s2mps13_ap", "s2mps13_cp", - "s2mps13_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_0.9V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD1_E_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD10_MIF_PLL_1.0V_AP"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD10_DPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MIPI2L_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD18_MIPI2L_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD18_LLI_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD18_ABB_ETC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD33_USB30_3.0V_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_INT_M_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_KFC_M_1.1V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDD_G3D_M_0.95V_AP"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDDQ_M1_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDDQ_M2_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDDQ_EFUSE"; - regulator-min-microvolt = <1400000>; - regulator-max-microvolt = <3400000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "V_TFLASH_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "V_CODEC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "VDDA_1.8V_COMP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo20_reg: LDO20 { - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo22_reg: LDO22 { - regulator-name = "CAM_IO_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo23_reg: LDO23 { - regulator-name = "CAM_SEN_CORE_1.05V_AP"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "VT_CAM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo25_reg: LDO25 { - regulator-name = "UNUSED_LDO25"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-off; - }; - - ldo26_reg: LDO26 { - regulator-name = "CAM_AF_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo27_reg: LDO27 { - regulator-name = "VCC_3.0V_LCD_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo28_reg: LDO28 { - regulator-name = "VCC_1.8V_LCD_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo29_reg: LDO29 { - regulator-name = "VT_CAM_2.8V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo30_reg: LDO30 { - regulator-name = "TSP_AVDD_3.3V_AP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo31_reg: LDO31 { - regulator-name = "TSP_VDD_1.85V_AP"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - }; - - ldo32_reg: LDO32 { - regulator-name = "VTOUCH_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo33_reg: LDO33 { - regulator-name = "VTOUCH_LED_3.3V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - }; - - ldo34_reg: LDO34 { - regulator-name = "VCC_1.8V_MHL_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <2100000>; - }; - - ldo35_reg: LDO35 { - regulator-name = "OIS_VM_2.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo36_reg: LDO36 { - regulator-name = "VSIL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo37_reg: LDO37 { - regulator-name = "VF_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo38_reg: LDO38 { - regulator-name = "VCC_3.0V_MOTOR_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo39_reg: LDO39 { - regulator-name = "V_HRM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo40_reg: LDO40 { - regulator-name = "V_HRM_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_EGL_1.0V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_KFC_1.0V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "VDD_INT_0.95V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_DISP_CAM0_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck6_reg: BUCK6 { - regulator-name = "VDD_G3D_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck7_reg: BUCK7 { - regulator-name = "VDD_MEM1_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VDD_LLDO_1.35V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_MLDO_2.0V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_mem2"; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - }; - }; -}; - -&hsi2c_8 { - status = "okay"; - - max77843@66 { - compatible = "maxim,max77843"; - interrupt-parent = <&gpa1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reg = <0x66>; - - muic: max77843-muic { - compatible = "maxim,max77843-muic"; - }; - - regulators { - compatible = "maxim,max77843-regulator"; - safeout1_reg: SAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - safeout2_reg: SAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <100000>; - regulator-max-microamp = <3150000>; - }; - }; - - haptic: max77843-haptic { - compatible = "maxim,max77843-haptic"; - haptic-supply = <&ldo38_reg>; - pwms = <&pwm 0 33670 0>; - pwm-names = "haptic"; - }; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&mshc_0 { - status = "okay"; - num-slots = <1>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cap-mmc-highspeed; - non-removable; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 3>; - samsung,read-strobe-delay = <90>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 - &sd0_bus8 &sd0_rdqs>; - bus-width = <8>; - assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; - assigned-clock-rates = <800000000>; -}; - -&mshc_2 { - status = "okay"; - num-slots = <1>; - cap-sd-highspeed; - disable-wp; - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; - cd-inverted; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; -}; - -&ppmu_d0_general { - status = "okay"; - events { - ppmu_event0_d0_general: ppmu-event0-d0-general { - event-name = "ppmu-event0-d0-general"; - }; - }; -}; - -&ppmu_d1_general { - status = "okay"; - events { - ppmu_event0_d1_general: ppmu-event0-d1-general { - event-name = "ppmu-event0-d1-general"; - }; - }; -}; - -&pinctrl_alive { - pinctrl-names = "default"; - pinctrl-0 = <&initial_alive>; - - initial_alive: initial-state { - PIN(INPUT, gpa0-0, DOWN, FAST_SR1); - PIN(INPUT, gpa0-1, NONE, FAST_SR1); - PIN(INPUT, gpa0-2, DOWN, FAST_SR1); - PIN(INPUT, gpa0-3, NONE, FAST_SR1); - PIN(INPUT, gpa0-4, NONE, FAST_SR1); - PIN(INPUT, gpa0-5, DOWN, FAST_SR1); - PIN(INPUT, gpa0-6, NONE, FAST_SR1); - PIN(INPUT, gpa0-7, NONE, FAST_SR1); - - PIN(INPUT, gpa1-0, UP, FAST_SR1); - PIN(INPUT, gpa1-1, NONE, FAST_SR1); - PIN(INPUT, gpa1-2, NONE, FAST_SR1); - PIN(INPUT, gpa1-3, DOWN, FAST_SR1); - PIN(INPUT, gpa1-4, DOWN, FAST_SR1); - PIN(INPUT, gpa1-5, NONE, FAST_SR1); - PIN(INPUT, gpa1-6, NONE, FAST_SR1); - PIN(INPUT, gpa1-7, NONE, FAST_SR1); - - PIN(INPUT, gpa2-0, NONE, FAST_SR1); - PIN(INPUT, gpa2-1, NONE, FAST_SR1); - PIN(INPUT, gpa2-2, NONE, FAST_SR1); - PIN(INPUT, gpa2-3, DOWN, FAST_SR1); - PIN(INPUT, gpa2-4, NONE, FAST_SR1); - PIN(INPUT, gpa2-5, DOWN, FAST_SR1); - PIN(INPUT, gpa2-6, DOWN, FAST_SR1); - PIN(INPUT, gpa2-7, NONE, FAST_SR1); - - PIN(INPUT, gpa3-0, DOWN, FAST_SR1); - PIN(INPUT, gpa3-1, DOWN, FAST_SR1); - PIN(INPUT, gpa3-2, NONE, FAST_SR1); - PIN(INPUT, gpa3-3, DOWN, FAST_SR1); - PIN(INPUT, gpa3-4, NONE, FAST_SR1); - PIN(INPUT, gpa3-5, DOWN, FAST_SR1); - PIN(INPUT, gpa3-6, DOWN, FAST_SR1); - PIN(INPUT, gpa3-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf1-0, NONE, FAST_SR1); - PIN(INPUT, gpf1-1, NONE, FAST_SR1); - PIN(INPUT, gpf1-2, DOWN, FAST_SR1); - PIN(INPUT, gpf1-4, UP, FAST_SR1); - PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); - PIN(INPUT, gpf1-6, DOWN, FAST_SR1); - PIN(INPUT, gpf1-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf2-0, DOWN, FAST_SR1); - PIN(INPUT, gpf2-1, DOWN, FAST_SR1); - PIN(INPUT, gpf2-2, DOWN, FAST_SR1); - PIN(INPUT, gpf2-3, DOWN, FAST_SR1); - - PIN(INPUT, gpf3-0, DOWN, FAST_SR1); - PIN(INPUT, gpf3-1, DOWN, FAST_SR1); - PIN(INPUT, gpf3-2, NONE, FAST_SR1); - PIN(INPUT, gpf3-3, DOWN, FAST_SR1); - - PIN(INPUT, gpf4-0, DOWN, FAST_SR1); - PIN(INPUT, gpf4-1, DOWN, FAST_SR1); - PIN(INPUT, gpf4-2, DOWN, FAST_SR1); - PIN(INPUT, gpf4-3, DOWN, FAST_SR1); - PIN(INPUT, gpf4-4, DOWN, FAST_SR1); - PIN(INPUT, gpf4-5, DOWN, FAST_SR1); - PIN(INPUT, gpf4-6, DOWN, FAST_SR1); - PIN(INPUT, gpf4-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf5-0, DOWN, FAST_SR1); - PIN(INPUT, gpf5-1, DOWN, FAST_SR1); - PIN(INPUT, gpf5-2, DOWN, FAST_SR1); - PIN(INPUT, gpf5-3, DOWN, FAST_SR1); - PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); - PIN(INPUT, gpf5-5, DOWN, FAST_SR1); - PIN(INPUT, gpf5-6, DOWN, FAST_SR1); - PIN(INPUT, gpf5-7, DOWN, FAST_SR1); - }; - - te_irq: te_irq { - samsung,pins = "gpf1-3"; - samsung,pin-function = <0xf>; - }; -}; - -&pinctrl_cpif { - pinctrl-names = "default"; - pinctrl-0 = <&initial_cpif>; - - initial_cpif: initial-state { - PIN(INPUT, gpv6-0, DOWN, FAST_SR1); - PIN(INPUT, gpv6-1, DOWN, FAST_SR1); - }; -}; - -&pinctrl_ese { - pinctrl-names = "default"; - pinctrl-0 = <&initial_ese>; - - initial_ese: initial-state { - PIN(INPUT, gpj2-0, DOWN, FAST_SR1); - PIN(INPUT, gpj2-1, DOWN, FAST_SR1); - PIN(INPUT, gpj2-2, DOWN, FAST_SR1); - }; -}; - -&pinctrl_fsys { - pinctrl-names = "default"; - pinctrl-0 = <&initial_fsys>; - - initial_fsys: initial-state { - PIN(INPUT, gpr3-0, NONE, FAST_SR1); - PIN(INPUT, gpr3-1, DOWN, FAST_SR1); - PIN(INPUT, gpr3-2, DOWN, FAST_SR1); - PIN(INPUT, gpr3-3, DOWN, FAST_SR1); - PIN(INPUT, gpr3-7, NONE, FAST_SR1); - }; -}; - -&pinctrl_imem { - pinctrl-names = "default"; - pinctrl-0 = <&initial_imem>; - - initial_imem: initial-state { - PIN(INPUT, gpf0-0, UP, FAST_SR1); - PIN(INPUT, gpf0-1, UP, FAST_SR1); - PIN(INPUT, gpf0-2, DOWN, FAST_SR1); - PIN(INPUT, gpf0-3, UP, FAST_SR1); - PIN(INPUT, gpf0-4, DOWN, FAST_SR1); - PIN(INPUT, gpf0-5, NONE, FAST_SR1); - PIN(INPUT, gpf0-6, DOWN, FAST_SR1); - PIN(INPUT, gpf0-7, UP, FAST_SR1); - }; -}; - -&pinctrl_nfc { - pinctrl-names = "default"; - pinctrl-0 = <&initial_nfc>; - - initial_nfc: initial-state { - PIN(INPUT, gpj0-2, DOWN, FAST_SR1); - }; -}; - -&pinctrl_peric { - pinctrl-names = "default"; - pinctrl-0 = <&initial_peric>; - - initial_peric: initial-state { - PIN(INPUT, gpv7-0, DOWN, FAST_SR1); - PIN(INPUT, gpv7-1, DOWN, FAST_SR1); - PIN(INPUT, gpv7-2, NONE, FAST_SR1); - PIN(INPUT, gpv7-3, DOWN, FAST_SR1); - PIN(INPUT, gpv7-4, DOWN, FAST_SR1); - PIN(INPUT, gpv7-5, DOWN, FAST_SR1); - - PIN(INPUT, gpb0-4, DOWN, FAST_SR1); - - PIN(INPUT, gpc0-2, DOWN, FAST_SR1); - PIN(INPUT, gpc0-5, DOWN, FAST_SR1); - PIN(INPUT, gpc0-7, DOWN, FAST_SR1); - - PIN(INPUT, gpc1-1, DOWN, FAST_SR1); - - PIN(INPUT, gpc3-4, NONE, FAST_SR1); - PIN(INPUT, gpc3-5, NONE, FAST_SR1); - PIN(INPUT, gpc3-6, NONE, FAST_SR1); - PIN(INPUT, gpc3-7, NONE, FAST_SR1); - - PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); - PIN(2, gpg0-1, DOWN, FAST_SR1); - - PIN(INPUT, gpd2-5, DOWN, FAST_SR1); - - PIN(INPUT, gpd4-0, NONE, FAST_SR1); - PIN(INPUT, gpd4-1, DOWN, FAST_SR1); - PIN(INPUT, gpd4-2, DOWN, FAST_SR1); - PIN(INPUT, gpd4-3, DOWN, FAST_SR1); - PIN(INPUT, gpd4-4, DOWN, FAST_SR1); - - PIN(INPUT, gpd6-3, DOWN, FAST_SR1); - - PIN(INPUT, gpd8-1, UP, FAST_SR1); - - PIN(INPUT, gpg1-0, DOWN, FAST_SR1); - PIN(INPUT, gpg1-1, DOWN, FAST_SR1); - PIN(INPUT, gpg1-2, DOWN, FAST_SR1); - PIN(INPUT, gpg1-3, DOWN, FAST_SR1); - PIN(INPUT, gpg1-4, DOWN, FAST_SR1); - - PIN(INPUT, gpg2-0, DOWN, FAST_SR1); - PIN(INPUT, gpg2-1, DOWN, FAST_SR1); - - PIN(INPUT, gpg3-0, DOWN, FAST_SR1); - PIN(INPUT, gpg3-1, DOWN, FAST_SR1); - PIN(INPUT, gpg3-5, DOWN, FAST_SR1); - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); - }; -}; - -&pinctrl_touch { - pinctrl-names = "default"; - pinctrl-0 = <&initial_touch>; - - initial_touch: initial-state { - PIN(INPUT, gpj1-2, DOWN, FAST_SR1); - }; -}; - -&pwm { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mic { - status = "okay"; - - i80-if-timings { - }; -}; - -&pmu_system_controller { - assigned-clocks = <&pmu_system_controller 0>; - assigned-clock-parents = <&xxti>; -}; - -&serial_1 { - status = "okay"; -}; - -&spi_1 { - cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - - wm5110: wm5110-codec@0 { - compatible = "wlf,wm5110"; - reg = <0x0>; - spi-max-frequency = <20000000>; - interrupt-parent = <&gpa0>; - interrupts = <4 IRQ_TYPE_NONE>; - clocks = <&pmu_system_controller 0>, - <&s2mps13_osc S2MPS11_CLK_BT>; - clock-names = "mclk1", "mclk2"; - - gpio-controller; - #gpio-cells = <2>; - - wlf,micd-detect-debounce = <300>; - wlf,micd-bias-start-time = <0x1>; - wlf,micd-rate = <0x7>; - wlf,micd-dbtime = <0x1>; - wlf,micd-force-micbias; - wlf,micd-configs = <0x0 1 0>; - wlf,hpdet-channel = <1>; - wlf,gpsw = <0x1>; - wlf,inmode = <2 0 2 0>; - - wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; - wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; - - /* core supplies */ - AVDD-supply = <&ldo18_reg>; - DBVDD1-supply = <&ldo18_reg>; - CPVDD-supply = <&ldo18_reg>; - DBVDD2-supply = <&ldo18_reg>; - DBVDD3-supply = <&ldo18_reg>; - - controller-data { - samsung,spi-feedback-delay = <0>; - }; - }; -}; - -&timer { - clock-frequency = <24000000>; -}; - -&tmu_atlas0 { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_apollo { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_g3d { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&usbdrd30 { - vdd33-supply = <&ldo10_reg>; - vdd10-supply = <&ldo6_reg>; - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "otg"; -}; - -&usbdrd30_phy { - vbus-supply = <&safeout1_reg>; - status = "okay"; -}; - -&xxti { - clock-frequency = <24000000>; -}; +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2 board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5433-tm2-common.dtsi" + +/ { + model = "Samsung TM2E board"; + compatible = "samsung,tm2e", "samsung,exynos5433"; +}; + +&regulators { + ldo31_reg: LDO31 { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 854c583092d5..53e361f61ad5 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -11,21 +11,23 @@ * published by the Free Software Foundation. */ -#include "exynos5433-tm2.dts" +#include "exynos5433-tm2-common.dtsi" / { model = "Samsung TM2E board"; compatible = "samsung,tm2e", "samsung,exynos5433"; }; -&ldo31_reg { - regulator-name = "TSP_VDD_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; -}; +&regulators { + ldo31_reg: LDO31 { + regulator-name = "TSP_VDD_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; -&ldo38_reg { - regulator-name = "VCC_3.3V_MOTOR_AP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + ldo38_reg: LDO38 { + regulator-name = "VCC_3.3V_MOTOR_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; };

[v4,2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other

Commit Message

Comments

Patch