@@ -251,60 +251,56 @@ static int __exit coh901327_remove(struct platform_device *pdev)
static int __init coh901327_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
int ret;
u16 val;
struct resource *res;
- parent = &pdev->dev;
+ parent = dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- virtbase = devm_ioremap_resource(&pdev->dev, res);
+ virtbase = devm_ioremap_resource(dev, res);
if (IS_ERR(virtbase))
return PTR_ERR(virtbase);
- clk = clk_get(&pdev->dev, NULL);
+ clk = clk_get(dev, NULL);
if (IS_ERR(clk)) {
ret = PTR_ERR(clk);
- dev_err(&pdev->dev, "could not get clock\n");
+ dev_err(dev, "could not get clock\n");
return ret;
}
ret = clk_prepare_enable(clk);
if (ret) {
- dev_err(&pdev->dev, "could not prepare and enable clock\n");
+ dev_err(dev, "could not prepare and enable clock\n");
goto out_no_clk_enable;
}
val = readw(virtbase + U300_WDOG_SR);
switch (val) {
case U300_WDOG_SR_STATUS_TIMED_OUT:
- dev_info(&pdev->dev,
- "watchdog timed out since last chip reset!\n");
+ dev_info(dev, "watchdog timed out since last chip reset!\n");
coh901327_wdt.bootstatus |= WDIOF_CARDRESET;
/* Status will be cleared below */
break;
case U300_WDOG_SR_STATUS_NORMAL:
- dev_info(&pdev->dev,
- "in normal status, no timeouts have occurred.\n");
+ dev_info(dev, "in normal status, no timeouts have occurred.\n");
break;
default:
- dev_info(&pdev->dev,
- "contains an illegal status code (%08x)\n", val);
+ dev_info(dev, "contains an illegal status code (%08x)\n", val);
break;
}
val = readw(virtbase + U300_WDOG_D2R);
switch (val) {
case U300_WDOG_D2R_DISABLE_STATUS_DISABLED:
- dev_info(&pdev->dev, "currently disabled.\n");
+ dev_info(dev, "currently disabled.\n");
break;
case U300_WDOG_D2R_DISABLE_STATUS_ENABLED:
- dev_info(&pdev->dev,
- "currently enabled! (disabling it now)\n");
+ dev_info(dev, "currently enabled! (disabling it now)\n");
coh901327_disable();
break;
default:
- dev_err(&pdev->dev,
- "contains an illegal enable/disable code (%08x)\n",
+ dev_err(dev, "contains an illegal enable/disable code (%08x)\n",
val);
break;
}
@@ -319,16 +315,16 @@ static int __init coh901327_probe(struct platform_device *pdev)
goto out_no_irq;
}
- ret = watchdog_init_timeout(&coh901327_wdt, margin, &pdev->dev);
+ ret = watchdog_init_timeout(&coh901327_wdt, margin, dev);
if (ret < 0)
coh901327_wdt.timeout = 60;
- coh901327_wdt.parent = &pdev->dev;
+ coh901327_wdt.parent = dev;
ret = watchdog_register_device(&coh901327_wdt);
if (ret)
goto out_no_wdog;
- dev_info(&pdev->dev, "initialized. timer margin=%d sec\n", margin);
+ dev_info(dev, "initialized. timer margin=%d sec\n", margin);
return 0;
out_no_wdog:
Use a local dev variable instead of dereferencing pdev->dev several times in the probe function to make the code easier to read. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- drivers/watchdog/coh901327_wdt.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-)