| Message ID | 20170110234745.29691-3-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Hi, On Wed, Jan 11, 2017 at 12:47:40AM +0100, Linus Walleij wrote: > This switches the AB8500 battery charger driver to using > the standard IIO ADC channel lookup and conversion routines. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-By: Sebastian Reichel <sre@kernel.org> -- Sebastian > drivers/power/supply/ab8500_charger.c | 78 ++++++++++++++++++++++++++--------- > 1 file changed, 58 insertions(+), 20 deletions(-) > > diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c > index 5cee9aa87aa3..c1c4873899e9 100644 > --- a/drivers/power/supply/ab8500_charger.c > +++ b/drivers/power/supply/ab8500_charger.c > @@ -29,10 +29,10 @@ > #include <linux/mfd/abx500/ab8500.h> > #include <linux/mfd/abx500.h> > #include <linux/mfd/abx500/ab8500-bm.h> > -#include <linux/mfd/abx500/ab8500-gpadc.h> > #include <linux/mfd/abx500/ux500_chargalg.h> > #include <linux/usb/otg.h> > #include <linux/mutex.h> > +#include <linux/iio/consumer.h> > > /* Charger constants */ > #define NO_PW_CONN 0 > @@ -235,7 +235,10 @@ struct ab8500_charger_max_usb_in_curr { > * @current_stepping_sessions: > * Counter for current stepping sessions > * @parent: Pointer to the struct ab8500 > - * @gpadc: Pointer to the struct gpadc > + * @adc_main_charger_v ADC channel for main charger voltage > + * @adc_main_charger_c ADC channel for main charger current > + * @adc_vbus_v ADC channel for USB charger voltage > + * @adc_usb_charger_c ADC channel for USB charger current > * @bm: Platform specific battery management information > * @flags: Structure for information about events triggered > * @usb_state: Structure for usb stack information > @@ -285,7 +288,10 @@ struct ab8500_charger { > int is_aca_rid; > atomic_t current_stepping_sessions; > struct ab8500 *parent; > - struct ab8500_gpadc *gpadc; > + struct iio_channel *adc_main_charger_v; > + struct iio_channel *adc_main_charger_c; > + struct iio_channel *adc_vbus_v; > + struct iio_channel *adc_usb_charger_c; > struct abx500_bm_data *bm; > struct ab8500_charger_event_flags flags; > struct ab8500_charger_usb_state usb_state; > @@ -461,13 +467,13 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, > */ > static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) > { > - int vch; > + int vch, ret; > > /* Only measure voltage if the charger is connected */ > if (di->ac.charger_connected) { > - vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); > - if (vch < 0) > - dev_err(di->dev, "%s gpadc conv failed,\n", __func__); > + ret = iio_read_channel_processed(di->adc_main_charger_v, &vch); > + if (ret < 0) > + dev_err(di->dev, "%s ADC conv failed,\n", __func__); > } else { > vch = 0; > } > @@ -512,13 +518,13 @@ static int ab8500_charger_ac_cv(struct ab8500_charger *di) > */ > static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) > { > - int vch; > + int vch, ret; > > /* Only measure voltage if the charger is connected */ > if (di->usb.charger_connected) { > - vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); > - if (vch < 0) > - dev_err(di->dev, "%s gpadc conv failed\n", __func__); > + ret = iio_read_channel_processed(di->adc_vbus_v, &vch); > + if (ret < 0) > + dev_err(di->dev, "%s ADC conv failed,\n", __func__); > } else { > vch = 0; > } > @@ -534,13 +540,13 @@ static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) > */ > static int ab8500_charger_get_usb_current(struct ab8500_charger *di) > { > - int ich; > + int ich, ret; > > /* Only measure current if the charger is online */ > if (di->usb.charger_online) { > - ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); > - if (ich < 0) > - dev_err(di->dev, "%s gpadc conv failed\n", __func__); > + ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich); > + if (ret < 0) > + dev_err(di->dev, "%s ADC conv failed,\n", __func__); > } else { > ich = 0; > } > @@ -556,13 +562,13 @@ static int ab8500_charger_get_usb_current(struct ab8500_charger *di) > */ > static int ab8500_charger_get_ac_current(struct ab8500_charger *di) > { > - int ich; > + int ich, ret; > > /* Only measure current if the charger is online */ > if (di->ac.charger_online) { > - ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); > - if (ich < 0) > - dev_err(di->dev, "%s gpadc conv failed\n", __func__); > + ret = iio_read_channel_processed(di->adc_main_charger_c, &ich); > + if (ret < 0) > + dev_err(di->dev, "%s ADC conv failed,\n", __func__); > } else { > ich = 0; > } > @@ -3485,7 +3491,39 @@ static int ab8500_charger_probe(struct platform_device *pdev) > /* get parent data */ > di->dev = &pdev->dev; > di->parent = dev_get_drvdata(pdev->dev.parent); > - di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); > + > + /* Get ADC channels */ > + di->adc_main_charger_v = devm_iio_channel_get(&pdev->dev, > + "main_charger_v"); > + if (IS_ERR(di->adc_main_charger_v)) { > + if (PTR_ERR(di->adc_main_charger_v) == -ENODEV) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "failed to get ADC main charger voltage\n"); > + return PTR_ERR(di->adc_main_charger_v); > + } > + di->adc_main_charger_c = devm_iio_channel_get(&pdev->dev, > + "main_charger_c"); > + if (IS_ERR(di->adc_main_charger_c)) { > + if (PTR_ERR(di->adc_main_charger_c) == -ENODEV) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "failed to get ADC main charger current\n"); > + return PTR_ERR(di->adc_main_charger_v); > + } > + di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v"); > + if (IS_ERR(di->adc_vbus_v)) { > + if (PTR_ERR(di->adc_vbus_v) == -ENODEV) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "failed to get ADC USB charger voltage\n"); > + return PTR_ERR(di->adc_vbus_v); > + } > + di->adc_usb_charger_c = devm_iio_channel_get(&pdev->dev, > + "usb_charger_c"); > + if (IS_ERR(di->adc_usb_charger_c)) { > + if (PTR_ERR(di->adc_usb_charger_c) == -ENODEV) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "failed to get ADC USB charger current\n"); > + return PTR_ERR(di->adc_usb_charger_c); > + } > > /* initialize lock */ > spin_lock_init(&di->usb_state.usb_lock); > -- > 2.9.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/01/17 23:47, Linus Walleij wrote: > This switches the AB8500 battery charger driver to using > the standard IIO ADC channel lookup and conversion routines. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Other than the fact you have no dependencies on IIO being there or similar (which the build bots pointed out anyway). Acked-by: Jonathan Cameron <jic23@kernel.org> > --- > drivers/power/supply/ab8500_charger.c | 78 ++++++++++++++++++++++++++--------- > 1 file changed, 58 insertions(+), 20 deletions(-) > > diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c > index 5cee9aa87aa3..c1c4873899e9 100644 > --- a/drivers/power/supply/ab8500_charger.c > +++ b/drivers/power/supply/ab8500_charger.c > @@ -29,10 +29,10 @@ > #include <linux/mfd/abx500/ab8500.h> > #include <linux/mfd/abx500.h> > #include <linux/mfd/abx500/ab8500-bm.h> > -#include <linux/mfd/abx500/ab8500-gpadc.h> > #include <linux/mfd/abx500/ux500_chargalg.h> > #include <linux/usb/otg.h> > #include <linux/mutex.h> > +#include <linux/iio/consumer.h> > > /* Charger constants */ > #define NO_PW_CONN 0 > @@ -235,7 +235,10 @@ struct ab8500_charger_max_usb_in_curr { > * @current_stepping_sessions: > * Counter for current stepping sessions > * @parent: Pointer to the struct ab8500 > - * @gpadc: Pointer to the struct gpadc > + * @adc_main_charger_v ADC channel for main charger voltage > + * @adc_main_charger_c ADC channel for main charger current > + * @adc_vbus_v ADC channel for USB charger voltage > + * @adc_usb_charger_c ADC channel for USB charger current > * @bm: Platform specific battery management information > * @flags: Structure for information about events triggered > * @usb_state: Structure for usb stack information > @@ -285,7 +288,10 @@ struct ab8500_charger { > int is_aca_rid; > atomic_t current_stepping_sessions; > struct ab8500 *parent; > - struct ab8500_gpadc *gpadc; > + struct iio_channel *adc_main_charger_v; > + struct iio_channel *adc_main_charger_c; > + struct iio_channel *adc_vbus_v; > + struct iio_channel *adc_usb_charger_c; > struct abx500_bm_data *bm; > struct ab8500_charger_event_flags flags; > struct ab8500_charger_usb_state usb_state; > @@ -461,13 +467,13 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, > */ > static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) > { > - int vch; > + int vch, ret; > > /* Only measure voltage if the charger is connected */ > if (di->ac.charger_connected) { > - vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); > - if (vch < 0) > - dev_err(di->dev, "%s gpadc conv failed,\n", __func__); > + ret = iio_read_channel_processed(di->adc_main_charger_v, &vch); > + if (ret < 0) > + dev_err(di->dev, "%s ADC conv failed,\n", __func__); > } else { > vch = 0; > } > @@ -512,13 +518,13 @@ static int ab8500_charger_ac_cv(struct ab8500_charger *di) > */ > static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) > { > - int vch; > + int vch, ret; > > /* Only measure voltage if the charger is connected */ > if (di->usb.charger_connected) { > - vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); > - if (vch < 0) > - dev_err(di->dev, "%s gpadc conv failed\n", __func__); > + ret = iio_read_channel_processed(di->adc_vbus_v, &vch); > + if (ret < 0) > + dev_err(di->dev, "%s ADC conv failed,\n", __func__); > } else { > vch = 0; > } > @@ -534,13 +540,13 @@ static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) > */ > static int ab8500_charger_get_usb_current(struct ab8500_charger *di) > { > - int ich; > + int ich, ret; > > /* Only measure current if the charger is online */ > if (di->usb.charger_online) { > - ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); > - if (ich < 0) > - dev_err(di->dev, "%s gpadc conv failed\n", __func__); > + ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich); > + if (ret < 0) > + dev_err(di->dev, "%s ADC conv failed,\n", __func__); > } else { > ich = 0; > } > @@ -556,13 +562,13 @@ static int ab8500_charger_get_usb_current(struct ab8500_charger *di) > */ > static int ab8500_charger_get_ac_current(struct ab8500_charger *di) > { > - int ich; > + int ich, ret; > > /* Only measure current if the charger is online */ > if (di->ac.charger_online) { > - ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); > - if (ich < 0) > - dev_err(di->dev, "%s gpadc conv failed\n", __func__); > + ret = iio_read_channel_processed(di->adc_main_charger_c, &ich); > + if (ret < 0) > + dev_err(di->dev, "%s ADC conv failed,\n", __func__); > } else { > ich = 0; > } > @@ -3485,7 +3491,39 @@ static int ab8500_charger_probe(struct platform_device *pdev) > /* get parent data */ > di->dev = &pdev->dev; > di->parent = dev_get_drvdata(pdev->dev.parent); > - di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); > + > + /* Get ADC channels */ > + di->adc_main_charger_v = devm_iio_channel_get(&pdev->dev, > + "main_charger_v"); > + if (IS_ERR(di->adc_main_charger_v)) { > + if (PTR_ERR(di->adc_main_charger_v) == -ENODEV) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "failed to get ADC main charger voltage\n"); > + return PTR_ERR(di->adc_main_charger_v); > + } > + di->adc_main_charger_c = devm_iio_channel_get(&pdev->dev, > + "main_charger_c"); > + if (IS_ERR(di->adc_main_charger_c)) { > + if (PTR_ERR(di->adc_main_charger_c) == -ENODEV) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "failed to get ADC main charger current\n"); > + return PTR_ERR(di->adc_main_charger_v); > + } > + di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v"); > + if (IS_ERR(di->adc_vbus_v)) { > + if (PTR_ERR(di->adc_vbus_v) == -ENODEV) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "failed to get ADC USB charger voltage\n"); > + return PTR_ERR(di->adc_vbus_v); > + } > + di->adc_usb_charger_c = devm_iio_channel_get(&pdev->dev, > + "usb_charger_c"); > + if (IS_ERR(di->adc_usb_charger_c)) { > + if (PTR_ERR(di->adc_usb_charger_c) == -ENODEV) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "failed to get ADC USB charger current\n"); > + return PTR_ERR(di->adc_usb_charger_c); > + } > > /* initialize lock */ > spin_lock_init(&di->usb_state.usb_lock); > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c index 5cee9aa87aa3..c1c4873899e9 100644 --- a/drivers/power/supply/ab8500_charger.c +++ b/drivers/power/supply/ab8500_charger.c @@ -29,10 +29,10 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/mfd/abx500.h> #include <linux/mfd/abx500/ab8500-bm.h> -#include <linux/mfd/abx500/ab8500-gpadc.h> #include <linux/mfd/abx500/ux500_chargalg.h> #include <linux/usb/otg.h> #include <linux/mutex.h> +#include <linux/iio/consumer.h> /* Charger constants */ #define NO_PW_CONN 0 @@ -235,7 +235,10 @@ struct ab8500_charger_max_usb_in_curr { * @current_stepping_sessions: * Counter for current stepping sessions * @parent: Pointer to the struct ab8500 - * @gpadc: Pointer to the struct gpadc + * @adc_main_charger_v ADC channel for main charger voltage + * @adc_main_charger_c ADC channel for main charger current + * @adc_vbus_v ADC channel for USB charger voltage + * @adc_usb_charger_c ADC channel for USB charger current * @bm: Platform specific battery management information * @flags: Structure for information about events triggered * @usb_state: Structure for usb stack information @@ -285,7 +288,10 @@ struct ab8500_charger { int is_aca_rid; atomic_t current_stepping_sessions; struct ab8500 *parent; - struct ab8500_gpadc *gpadc; + struct iio_channel *adc_main_charger_v; + struct iio_channel *adc_main_charger_c; + struct iio_channel *adc_vbus_v; + struct iio_channel *adc_usb_charger_c; struct abx500_bm_data *bm; struct ab8500_charger_event_flags flags; struct ab8500_charger_usb_state usb_state; @@ -461,13 +467,13 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, */ static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) { - int vch; + int vch, ret; /* Only measure voltage if the charger is connected */ if (di->ac.charger_connected) { - vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); - if (vch < 0) - dev_err(di->dev, "%s gpadc conv failed,\n", __func__); + ret = iio_read_channel_processed(di->adc_main_charger_v, &vch); + if (ret < 0) + dev_err(di->dev, "%s ADC conv failed,\n", __func__); } else { vch = 0; } @@ -512,13 +518,13 @@ static int ab8500_charger_ac_cv(struct ab8500_charger *di) */ static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) { - int vch; + int vch, ret; /* Only measure voltage if the charger is connected */ if (di->usb.charger_connected) { - vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); - if (vch < 0) - dev_err(di->dev, "%s gpadc conv failed\n", __func__); + ret = iio_read_channel_processed(di->adc_vbus_v, &vch); + if (ret < 0) + dev_err(di->dev, "%s ADC conv failed,\n", __func__); } else { vch = 0; } @@ -534,13 +540,13 @@ static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) */ static int ab8500_charger_get_usb_current(struct ab8500_charger *di) { - int ich; + int ich, ret; /* Only measure current if the charger is online */ if (di->usb.charger_online) { - ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); - if (ich < 0) - dev_err(di->dev, "%s gpadc conv failed\n", __func__); + ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich); + if (ret < 0) + dev_err(di->dev, "%s ADC conv failed,\n", __func__); } else { ich = 0; } @@ -556,13 +562,13 @@ static int ab8500_charger_get_usb_current(struct ab8500_charger *di) */ static int ab8500_charger_get_ac_current(struct ab8500_charger *di) { - int ich; + int ich, ret; /* Only measure current if the charger is online */ if (di->ac.charger_online) { - ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); - if (ich < 0) - dev_err(di->dev, "%s gpadc conv failed\n", __func__); + ret = iio_read_channel_processed(di->adc_main_charger_c, &ich); + if (ret < 0) + dev_err(di->dev, "%s ADC conv failed,\n", __func__); } else { ich = 0; } @@ -3485,7 +3491,39 @@ static int ab8500_charger_probe(struct platform_device *pdev) /* get parent data */ di->dev = &pdev->dev; di->parent = dev_get_drvdata(pdev->dev.parent); - di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* Get ADC channels */ + di->adc_main_charger_v = devm_iio_channel_get(&pdev->dev, + "main_charger_v"); + if (IS_ERR(di->adc_main_charger_v)) { + if (PTR_ERR(di->adc_main_charger_v) == -ENODEV) + return -EPROBE_DEFER; + dev_err(&pdev->dev, "failed to get ADC main charger voltage\n"); + return PTR_ERR(di->adc_main_charger_v); + } + di->adc_main_charger_c = devm_iio_channel_get(&pdev->dev, + "main_charger_c"); + if (IS_ERR(di->adc_main_charger_c)) { + if (PTR_ERR(di->adc_main_charger_c) == -ENODEV) + return -EPROBE_DEFER; + dev_err(&pdev->dev, "failed to get ADC main charger current\n"); + return PTR_ERR(di->adc_main_charger_v); + } + di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v"); + if (IS_ERR(di->adc_vbus_v)) { + if (PTR_ERR(di->adc_vbus_v) == -ENODEV) + return -EPROBE_DEFER; + dev_err(&pdev->dev, "failed to get ADC USB charger voltage\n"); + return PTR_ERR(di->adc_vbus_v); + } + di->adc_usb_charger_c = devm_iio_channel_get(&pdev->dev, + "usb_charger_c"); + if (IS_ERR(di->adc_usb_charger_c)) { + if (PTR_ERR(di->adc_usb_charger_c) == -ENODEV) + return -EPROBE_DEFER; + dev_err(&pdev->dev, "failed to get ADC USB charger current\n"); + return PTR_ERR(di->adc_usb_charger_c); + } /* initialize lock */ spin_lock_init(&di->usb_state.usb_lock);
This switches the AB8500 battery charger driver to using the standard IIO ADC channel lookup and conversion routines. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/power/supply/ab8500_charger.c | 78 ++++++++++++++++++++++++++--------- 1 file changed, 58 insertions(+), 20 deletions(-)