@@ -33,11 +33,9 @@ config SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_MATCH if ACPI
depends on (X86 || COMPILE_TEST)
-# firmware stuff depends DW_DMAC_CORE; since there is no depends-on from
-# the reverse selection, each machine driver needs to select
-# SND_SOC_INTEL_SST_FIRMWARE carefully depending on DW_DMAC_CORE
config SND_SOC_INTEL_SST_FIRMWARE
tristate
+ select DW_DMAC_CORE
config SND_SOC_INTEL_SST_ACPI
tristate
@@ -47,16 +45,18 @@ config SND_SOC_INTEL_SST_MATCH
config SND_SOC_INTEL_HASWELL
tristate
+ select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_FIRMWARE
config SND_SOC_INTEL_BAYTRAIL
tristate
+ select SND_SOC_INTEL_SST
+ select SND_SOC_INTEL_SST_FIRMWARE
config SND_SOC_INTEL_HASWELL_MACH
tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
- depends on DW_DMAC_CORE
- select SND_SOC_INTEL_SST
+ depends on DMADEVICES
select SND_SOC_INTEL_HASWELL
select SND_SOC_RT5640
help
@@ -99,9 +99,8 @@ config SND_SOC_INTEL_BXT_RT298_MACH
config SND_SOC_INTEL_BYT_RT5640_MACH
tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
depends on X86_INTEL_LPSS && I2C
- depends on DW_DMAC_CORE && (SND_SST_IPC_ACPI = n)
- select SND_SOC_INTEL_SST
- select SND_SOC_INTEL_SST_FIRMWARE
+ depends on DMADEVICES
+ depends on SND_SST_IPC_ACPI = n
select SND_SOC_INTEL_BAYTRAIL
select SND_SOC_RT5640
help
@@ -112,9 +111,8 @@ config SND_SOC_INTEL_BYT_RT5640_MACH
config SND_SOC_INTEL_BYT_MAX98090_MACH
tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
depends on X86_INTEL_LPSS && I2C
- depends on DW_DMAC_CORE && (SND_SST_IPC_ACPI = n)
- select SND_SOC_INTEL_SST
- select SND_SOC_INTEL_SST_FIRMWARE
+ depends on DMADEVICES
+ depends on SND_SST_IPC_ACPI = n
select SND_SOC_INTEL_BAYTRAIL
select SND_SOC_MAX98090
help
@@ -123,9 +121,8 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH
config SND_SOC_INTEL_BDW_RT5677_MACH
tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec"
- depends on X86_INTEL_LPSS && GPIOLIB && I2C && DW_DMAC
- depends on DW_DMAC_CORE=y
- select SND_SOC_INTEL_SST
+ depends on X86_INTEL_LPSS && GPIOLIB && I2C
+ depends on DMADEVICES
select SND_SOC_INTEL_HASWELL
select SND_SOC_RT5677
help
@@ -134,10 +131,8 @@ config SND_SOC_INTEL_BDW_RT5677_MACH
config SND_SOC_INTEL_BROADWELL_MACH
tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
- depends on X86_INTEL_LPSS && I2C && DW_DMAC && \
- I2C_DESIGNWARE_PLATFORM
- depends on DW_DMAC_CORE
- select SND_SOC_INTEL_SST
+ depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
+ depends on DMADEVICES
select SND_SOC_INTEL_HASWELL
select SND_SOC_RT286
help
Select DW_DMAC_CORE like the rest of glue drivers do, e.g. drivers/dma/dw/Kconfig. While here group selectors under SND_SOC_INTEL_HASWELL and SND_SOC_INTEL_BAYTRAIL. Make platforms, which are using a common SST firmware driver, to be dependent on DMADEVICES. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- sound/soc/intel/Kconfig | 31 +++++++++++++------------------ 1 file changed, 13 insertions(+), 18 deletions(-)