diff mbox

[v3,04/14] GPIO: Add gpio-ingenic driver

Message ID 20170125185207.23902-5-paul@crapouillou.net (mailing list archive)
State New, archived
Headers show

Commit Message

Paul Cercueil Jan. 25, 2017, 6:51 p.m. UTC
This driver handles the GPIOs of all the Ingenic JZ47xx SoCs
currently supported by the upsteam Linux kernel.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/gpio/Kconfig        |  10 ++
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/gpio-ingenic.c | 367 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 378 insertions(+)
 create mode 100644 drivers/gpio/gpio-ingenic.c

v2: Consider it's a new patch. Completely rewritten from v1.
v3: Add missing include <linux/pinctrl/consumer.h> and drop semicolon after }

Comments

Linus Walleij Jan. 31, 2017, 2:13 p.m. UTC | #1
On Wed, Jan 25, 2017 at 7:51 PM, Paul Cercueil <paul@crapouillou.net> wrote:

> This driver handles the GPIOs of all the Ingenic JZ47xx SoCs
> currently supported by the upsteam Linux kernel.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>

Looking nice.

> +#define JZ4740_GPIO_DATA       0x10
> +#define JZ4740_GPIO_SELECT     0x50
> +#define JZ4740_GPIO_DIR                0x60
> +#define JZ4740_GPIO_TRIG       0x70
> +#define JZ4740_GPIO_FLAG       0x80
> +
> +#define JZ4780_GPIO_INT                0x10
> +#define JZ4780_GPIO_PAT1       0x30
> +#define JZ4780_GPIO_PAT0       0x40
> +#define JZ4780_GPIO_FLAG       0x50
> +
> +#define REG_SET(x) ((x) + 0x4)
> +#define REG_CLEAR(x) ((x) + 0x8)
(...)
> +enum jz_version {
> +       ID_JZ4740,
> +       ID_JZ4780,
> +};
(...)
> +static inline bool gpio_get_value(struct ingenic_gpio_chip *jzgc, u8 offset)
> +{
> +       if (jzgc->version >= ID_JZ4780)
> +               return readl(jzgc->base + GPIO_PIN) & BIT(offset);
> +       else
> +               return readl(jzgc->base + JZ4740_GPIO_DATA) & BIT(offset);
> +}

This works for me, for sure.

What some people do, is to put the right virtual address in to the state
container.

So it would be just:

return !!readl(jzgc->datareg) & BIT(offset));

Notice also the double-bang that clamps the value to a bool. I know
the core does it too but I like to see it in drivers just to be sure.

> +static void gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value)
> +{
> +       u8 reg;
> +
> +       if (jzgc->version >= ID_JZ4780)
> +               reg = JZ4780_GPIO_PAT0;
> +       else
> +               reg = JZ4740_GPIO_DATA;
> +
> +       if (value)
> +               writel(BIT(offset), jzgc->base + REG_SET(reg));
> +       else
> +               writel(BIT(offset), jzgc->base + REG_CLEAR(reg));
> +}

Same comment.

What some drivers do when they just get/set a bit in a register
to get/set or set the direction of a GPIO, is to select GPIO_GENERIC
and just bgpio_init() with the right iomem pointers, then the core
will register handlers for get, set, set_direcition callback and
get_direction and your driver can just focus on the remainders.

> +static void ingenic_gpio_set(struct gpio_chip *gc,
> +               unsigned int offset, int value)
> +{
> +       struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
> +
> +       gpio_set_value(jzgc, offset, value);
> +}
> +
> +static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset)
> +{
> +       struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
> +
> +       return (int) gpio_get_value(jzgc, offset);
> +}
> +
> +static int ingenic_gpio_direction_input(struct gpio_chip *gc,
> +               unsigned int offset)
> +{
> +       return pinctrl_gpio_direction_input(gc->base + offset);
> +}
> +
> +static int ingenic_gpio_direction_output(struct gpio_chip *gc,
> +               unsigned int offset, int value)
> +{
> +       ingenic_gpio_set(gc, offset, value);
> +       return pinctrl_gpio_direction_output(gc->base + offset);
> +}

If you're not just replacing these with GPIO_GENERIC, please also
include a .get_direction() callback.

It's especially nice as it reads out the state at probe and "lsgpio"
lists if pins are inputs or outputs.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij Jan. 31, 2017, 2:20 p.m. UTC | #2
Forgot to mention this:

On Wed, Jan 25, 2017 at 7:51 PM, Paul Cercueil <paul@crapouillou.net> wrote:
> This driver handles the GPIOs of all the Ingenic JZ47xx SoCs
> currently supported by the upsteam Linux kernel.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
(...)
> +       jzgc->gc.base = -1;

Nice

> +       of_property_read_u32(dev->of_node, "base", &jzgc->gc.base);

Remove this. Dynamic allocation should be fine, if you're using the
new userspace ABI like tools/gpio/* or libgpiod and only that and in-kernel
consumers, dynamic numbers are just fine.

If you have old sysfs userspace that you need to support using the
global GPIO numberspace, please look into ways to phase that out.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Paul Cercueil Jan. 31, 2017, 3:29 p.m. UTC | #3
Le 2017-01-31 15:20, Linus Walleij a écrit :

>> + of_property_read_u32(dev->of_node, "base", &jzgc->gc.base);
> 
> Remove this. Dynamic allocation should be fine, if you're using the
> new userspace ABI like tools/gpio/* or libgpiod and only that and 
> in-kernel
> consumers, dynamic numbers are just fine.

The problem is that the QI_LB60 board code still have a lot of 
references
to global GPIO numbers. Just grep for JZ_GPIO_PORT in
arch/mips/jz4740/board-qi_lb60.c to see what I mean...

-Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij Feb. 3, 2017, 1:58 p.m. UTC | #4
On Tue, Jan 31, 2017 at 4:29 PM, Paul Cercueil <paul@crapouillou.net> wrote:
> Le 2017-01-31 15:20, Linus Walleij a écrit :
>
>>> + of_property_read_u32(dev->of_node, "base", &jzgc->gc.base);
>>
>>
>> Remove this. Dynamic allocation should be fine, if you're using the
>> new userspace ABI like tools/gpio/* or libgpiod and only that and
>> in-kernel
>> consumers, dynamic numbers are just fine.
>
>
> The problem is that the QI_LB60 board code still have a lot of references
> to global GPIO numbers. Just grep for JZ_GPIO_PORT in
> arch/mips/jz4740/board-qi_lb60.c to see what I mean...

OK I understand we might need a compromise here to get the code moving.

But we need to keep it out of the device tree.

I think it's better to put a base table relative to the memory base in
the driver in that case:

unsigned int gpio_global_base;

switch (memory_base_address) {
case 0x41000000:
    gpio_global_base = 0x00;
    break;
case 0x42000000:
    gpio_global_base = 0x20;

(...)

etc. (Those are not your base addresses but you get the idea).

Include a few comments like:

/*
 * DO NOT EXPAND THIS: FOR BACKWARD GPIO NUMBERSPACE
 * COMPATIBIBILITY ONLY: WORK TO TRANSITION CONSUMERS TO
 * USE THE GPIO DESCRIPTOR API IN <linux/gpio/consumer.h> INSTEAD.
 */

Then I'll be happy :)

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Paul Cercueil Feb. 9, 2017, 5:14 p.m. UTC | #5
Hi,

> What some drivers do when they just get/set a bit in a register
> to get/set or set the direction of a GPIO, is to select GPIO_GENERIC
> and just bgpio_init() with the right iomem pointers, then the core
> will register handlers for get, set, set_direcition callback and
> get_direction and your driver can just focus on the remainders.

GPIO_GENERIC and bgpio_init() would work for my .set() / .get() 
callbacks,
not for my .direction_input() / .direction_output() callbacks which need
to set more than one register.

> If you're not just replacing these with GPIO_GENERIC, please also
> include a .get_direction() callback.

My .direction_input() and .direction_output() callbacks just call into
the pinctrl driver, using pinctrl_gpio_direction_[in,out]put().
I didn't find a way to get the direction info from the pinctrl driver,
is that something that the core should provide?

Thanks,
-Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij Feb. 12, 2017, 8:48 p.m. UTC | #6
On Thu, Feb 9, 2017 at 6:14 PM, Paul Cercueil <paul@crapouillou.net> wrote:

>> If you're not just replacing these with GPIO_GENERIC, please also
>> include a .get_direction() callback.
>
> My .direction_input() and .direction_output() callbacks just call into
> the pinctrl driver, using pinctrl_gpio_direction_[in,out]put().
> I didn't find a way to get the direction info from the pinctrl driver,
> is that something that the core should provide?

Hm OK you have a clear point there, there is no such callback.

OK I do not require you to fix that at this time.

I am hesitant about providing ever more callbacks from GPIO
to pin control, I might need some help for consolidation here.

With Mika's patches we have a .set_config() call to
pinctrl_gpio_set_config() so essentially
we *could* actually refactor all pin control drivers providing
a GPIO back-end to use:

pinctrl_gpio_set_config(gpio, PIN_CONF_PACKED(PIN_CONFIG_INPUT_ENABLE, 0));
pinctrl_gpio_set_config(gpio, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, val));

And replace the calls to pinctrl_gpio_direction_input()
and pinctrl_gpio_direction_output() with this throughout.

It makes things a bit simpler. If we need to figure things
out the reverse direction then pinctrl_gpio_get_config()
should be implemented and used as back-end for
figuring out direction.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d5d36549ecc1..21992ca29342 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -225,6 +225,16 @@  config GPIO_ICH
 
 	  If unsure, say N.
 
+config GPIO_INGENIC
+	tristate "Ingenic JZ47xx SoCs GPIO support"
+	depends on MACH_INGENIC || COMPILE_TEST
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support the GPIO functionality present on the
+	  JZ4740 and JZ4780 SoCs from Ingenic.
+
+	  If unsure, say N.
+
 config GPIO_IOP
 	tristate "Intel IOP GPIO"
 	depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index a7676b82de6f..3c5412ae56f0 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -52,6 +52,7 @@  obj-$(CONFIG_GPIO_GPIO_MM)	+= gpio-gpio-mm.o
 obj-$(CONFIG_GPIO_GRGPIO)	+= gpio-grgpio.o
 obj-$(CONFIG_HTC_EGPIO)		+= gpio-htc-egpio.o
 obj-$(CONFIG_GPIO_ICH)		+= gpio-ich.o
+obj-$(CONFIG_GPIO_INGENIC)	+= gpio-ingenic.o
 obj-$(CONFIG_GPIO_IOP)		+= gpio-iop.o
 obj-$(CONFIG_GPIO_IT87)		+= gpio-it87.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
diff --git a/drivers/gpio/gpio-ingenic.c b/drivers/gpio/gpio-ingenic.c
new file mode 100644
index 000000000000..1bb6c4d5b8ba
--- /dev/null
+++ b/drivers/gpio/gpio-ingenic.c
@@ -0,0 +1,367 @@ 
+/*
+ * Ingenic JZ47xx GPIO driver
+ *
+ * Copyright (c) 2017 Paul Cercueil <paul@crapouillou.net>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+
+#define GPIO_PIN	0x00
+#define GPIO_MSK	0x20
+
+#define JZ4740_GPIO_DATA	0x10
+#define JZ4740_GPIO_SELECT	0x50
+#define JZ4740_GPIO_DIR		0x60
+#define JZ4740_GPIO_TRIG	0x70
+#define JZ4740_GPIO_FLAG	0x80
+
+#define JZ4780_GPIO_INT		0x10
+#define JZ4780_GPIO_PAT1	0x30
+#define JZ4780_GPIO_PAT0	0x40
+#define JZ4780_GPIO_FLAG	0x50
+
+#define REG_SET(x) ((x) + 0x4)
+#define REG_CLEAR(x) ((x) + 0x8)
+
+enum jz_version {
+	ID_JZ4740,
+	ID_JZ4780,
+};
+
+struct ingenic_gpio_chip {
+	void __iomem *base;
+	struct gpio_chip gc;
+	struct irq_chip irq_chip;
+	unsigned int irq;
+	enum jz_version version;
+};
+
+static inline bool gpio_get_value(struct ingenic_gpio_chip *jzgc, u8 offset)
+{
+	if (jzgc->version >= ID_JZ4780)
+		return readl(jzgc->base + GPIO_PIN) & BIT(offset);
+	else
+		return readl(jzgc->base + JZ4740_GPIO_DATA) & BIT(offset);
+}
+
+static void gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value)
+{
+	u8 reg;
+
+	if (jzgc->version >= ID_JZ4780)
+		reg = JZ4780_GPIO_PAT0;
+	else
+		reg = JZ4740_GPIO_DATA;
+
+	if (value)
+		writel(BIT(offset), jzgc->base + REG_SET(reg));
+	else
+		writel(BIT(offset), jzgc->base + REG_CLEAR(reg));
+}
+
+static void irq_set_type(struct ingenic_gpio_chip *jzgc,
+		u8 offset, unsigned int type)
+{
+	u8 reg1, reg2;
+
+	if (jzgc->version >= ID_JZ4780) {
+		reg1 = JZ4780_GPIO_PAT1;
+		reg2 = JZ4780_GPIO_PAT0;
+	} else {
+		reg1 = JZ4740_GPIO_TRIG;
+		reg2 = JZ4740_GPIO_DIR;
+	}
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		writel(BIT(offset), jzgc->base + REG_SET(reg2));
+		writel(BIT(offset), jzgc->base + REG_SET(reg1));
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		writel(BIT(offset), jzgc->base + REG_CLEAR(reg2));
+		writel(BIT(offset), jzgc->base + REG_SET(reg1));
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		writel(BIT(offset), jzgc->base + REG_SET(reg2));
+		writel(BIT(offset), jzgc->base + REG_CLEAR(reg1));
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+	default:
+		writel(BIT(offset), jzgc->base + REG_CLEAR(reg2));
+		writel(BIT(offset), jzgc->base + REG_CLEAR(reg1));
+		break;
+	}
+}
+
+static void ingenic_gpio_irq_mask(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	writel(BIT(irqd->hwirq), jzgc->base + REG_SET(GPIO_MSK));
+}
+
+static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	writel(BIT(irqd->hwirq), jzgc->base + REG_CLEAR(GPIO_MSK));
+}
+
+static void ingenic_gpio_irq_enable(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+	int irq = irqd->hwirq;
+
+	if (jzgc->version >= ID_JZ4780)
+		writel(BIT(irq), jzgc->base + REG_SET(JZ4780_GPIO_INT));
+	else
+		writel(BIT(irq), jzgc->base + REG_SET(JZ4740_GPIO_SELECT));
+
+	ingenic_gpio_irq_unmask(irqd);
+}
+
+static void ingenic_gpio_irq_disable(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+	int irq = irqd->hwirq;
+
+	ingenic_gpio_irq_mask(irqd);
+
+	if (jzgc->version >= ID_JZ4780)
+		writel(BIT(irq), jzgc->base + REG_CLEAR(JZ4780_GPIO_INT));
+	else
+		writel(BIT(irq), jzgc->base + REG_CLEAR(JZ4740_GPIO_SELECT));
+}
+
+static void ingenic_gpio_irq_ack(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+	int irq = irqd->hwirq;
+	bool high;
+
+	if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) {
+		/*
+		 * Switch to an interrupt for the opposite edge to the one that
+		 * triggered the interrupt being ACKed.
+		 */
+		high = gpio_get_value(jzgc, irq);
+		if (high)
+			irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING);
+		else
+			irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING);
+	}
+
+	if (jzgc->version >= ID_JZ4780)
+		writel(BIT(irq), jzgc->base + REG_CLEAR(JZ4780_GPIO_FLAG));
+	else
+		writel(BIT(irq), jzgc->base + REG_SET(JZ4740_GPIO_DATA));
+}
+
+static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_set_handler_locked(irqd, handle_edge_irq);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_set_handler_locked(irqd, handle_level_irq);
+		break;
+	default:
+		irq_set_handler_locked(irqd, handle_bad_irq);
+	}
+
+	if (type == IRQ_TYPE_EDGE_BOTH) {
+		/*
+		 * The hardware does not support interrupts on both edges. The
+		 * best we can do is to set up a single-edge interrupt and then
+		 * switch to the opposing edge when ACKing the interrupt.
+		 */
+		bool high = gpio_get_value(jzgc, irqd->hwirq);
+
+		type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
+	}
+
+	irq_set_type(jzgc, irqd->hwirq, type);
+	return 0;
+}
+
+static int ingenic_gpio_irq_set_wake(struct irq_data *irqd, unsigned int on)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	return irq_set_irq_wake(jzgc->irq, on);
+}
+
+static void ingenic_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+	struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+	unsigned long flag, i;
+
+	chained_irq_enter(irq_chip, desc);
+
+	if (jzgc->version >= ID_JZ4780)
+		flag = readl(jzgc->base + JZ4780_GPIO_FLAG);
+	else
+		flag = readl(jzgc->base + JZ4740_GPIO_FLAG);
+
+	for_each_set_bit(i, &flag, 32)
+		generic_handle_irq(irq_linear_revmap(gc->irqdomain, i));
+	chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_gpio_set(struct gpio_chip *gc,
+		unsigned int offset, int value)
+{
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	gpio_set_value(jzgc, offset, value);
+}
+
+static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	return (int) gpio_get_value(jzgc, offset);
+}
+
+static int ingenic_gpio_direction_input(struct gpio_chip *gc,
+		unsigned int offset)
+{
+	return pinctrl_gpio_direction_input(gc->base + offset);
+}
+
+static int ingenic_gpio_direction_output(struct gpio_chip *gc,
+		unsigned int offset, int value)
+{
+	ingenic_gpio_set(gc, offset, value);
+	return pinctrl_gpio_direction_output(gc->base + offset);
+}
+
+static const struct of_device_id ingenic_gpio_of_match[] = {
+	{ .compatible = "ingenic,jz4740-gpio", .data = (void *)ID_JZ4740 },
+	{ .compatible = "ingenic,jz4780-gpio", .data = (void *)ID_JZ4780 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ingenic_gpio_of_match);
+
+static int ingenic_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id = of_match_device(
+			ingenic_gpio_of_match, dev);
+	struct ingenic_gpio_chip *jzgc;
+	int err;
+
+	jzgc = devm_kzalloc(dev, sizeof(*jzgc), GFP_KERNEL);
+	if (!jzgc)
+		return -ENOMEM;
+
+	jzgc->base = of_iomap(dev->of_node, 0);
+	if (!jzgc->base) {
+		dev_err(dev, "failed to map IO memory\n");
+		return -ENXIO;
+	}
+
+	jzgc->gc.base = -1;
+	jzgc->gc.ngpio = 32;
+	jzgc->gc.parent = dev;
+	jzgc->gc.of_node = dev->of_node;
+	jzgc->gc.label = "";
+	jzgc->gc.owner = THIS_MODULE;
+	jzgc->version = (enum jz_version)of_id->data;
+
+	jzgc->gc.set = ingenic_gpio_set;
+	jzgc->gc.get = ingenic_gpio_get;
+	jzgc->gc.direction_input = ingenic_gpio_direction_input;
+	jzgc->gc.direction_output = ingenic_gpio_direction_output;
+
+	if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
+		jzgc->gc.request = gpiochip_generic_request;
+		jzgc->gc.free = gpiochip_generic_free;
+	}
+
+	of_property_read_u32(dev->of_node, "base", &jzgc->gc.base);
+
+	err = devm_gpiochip_add_data(dev, &jzgc->gc, jzgc);
+	if (err)
+		return err;
+
+	if (!of_property_read_bool(dev->of_node, "interrupt-controller"))
+		return 0;
+
+	jzgc->irq = irq_of_parse_and_map(dev->of_node, 0);
+	if (!jzgc->irq)
+		return -EINVAL;
+
+	jzgc->irq_chip.name = dev->of_node->name;
+	jzgc->irq_chip.irq_enable = ingenic_gpio_irq_enable;
+	jzgc->irq_chip.irq_disable = ingenic_gpio_irq_disable;
+	jzgc->irq_chip.irq_unmask = ingenic_gpio_irq_unmask;
+	jzgc->irq_chip.irq_mask = ingenic_gpio_irq_mask;
+	jzgc->irq_chip.irq_ack = ingenic_gpio_irq_ack;
+	jzgc->irq_chip.irq_set_type = ingenic_gpio_irq_set_type;
+	jzgc->irq_chip.irq_set_wake = ingenic_gpio_irq_set_wake;
+	jzgc->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
+
+	err = gpiochip_irqchip_add(&jzgc->gc, &jzgc->irq_chip, 0,
+			handle_level_irq, IRQ_TYPE_NONE);
+	if (err)
+		return err;
+
+	gpiochip_set_chained_irqchip(&jzgc->gc, &jzgc->irq_chip,
+			jzgc->irq, ingenic_gpio_irq_handler);
+	return 0;
+}
+
+static int ingenic_gpio_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver ingenic_gpio_driver = {
+	.driver = {
+		.name = "gpio-ingenic",
+		.of_match_table = of_match_ptr(ingenic_gpio_of_match),
+	},
+	.probe = ingenic_gpio_probe,
+	.remove = ingenic_gpio_remove,
+};
+
+static int __init ingenic_gpio_drv_register(void)
+{
+	return platform_driver_register(&ingenic_gpio_driver);
+}
+subsys_initcall(ingenic_gpio_drv_register);
+
+static void __exit ingenic_gpio_drv_unregister(void)
+{
+	platform_driver_unregister(&ingenic_gpio_driver);
+}
+module_exit(ingenic_gpio_drv_unregister);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ47xx GPIO driver");
+MODULE_LICENSE("GPL");