@@ -45,43 +45,3 @@
#include "sun5i-a13.dtsi"
-/ {
- chosen {
- framebuffer@1 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
- <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
- status = "disabled";
- };
- };
-
- soc@01c00000 {
- tve0: tv-encoder@01c0a000 {
- compatible = "allwinner,sun4i-a10-tv-encoder";
- reg = <0x01c0a000 0x1000>;
- clocks = <&ccu CLK_AHB_TVE>;
- resets = <&ccu RST_TVE>;
- status = "disabled";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_out_tve0>;
- };
- };
- };
- };
-};
-
-&tcon0_out {
- tcon0_out_tve0: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tve0_in_tcon0>;
- };
-};
@@ -187,6 +187,24 @@
#size-cells = <0>;
};
+ tve0: tv-encoder@01c0a000 {
+ compatible = "allwinner,sun4i-a10-tv-encoder";
+ reg = <0x01c0a000 0x1000>;
+ clocks = <&ccu CLK_AHB_TVE>;
+ resets = <&ccu RST_TVE>;
+ status = "disabled";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tve0_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_tve0>;
+ };
+ };
+ };
+
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
@@ -238,6 +256,11 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_tve0: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tve0_in_tcon0>;
+ };
};
};
};
Some controllers found in the R8 DTSI actually apply to all of the sun5i family. Move those into the common DTSI so that all SoCs can benefit from it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm/boot/dts/sun5i-r8.dtsi | 40 +---------------------------------- arch/arm/boot/dts/sun5i.dtsi | 23 ++++++++++++++++++++- 2 files changed, 23 insertions(+), 40 deletions(-)