| Message ID | alpine.LNX.2.00.1702051051090.26313@T420s (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, Feb 5, 2017 at 10:53 AM, Hans Ulli Kroll <ulli.kroll@googlemail.com> wrote: > Hi Linus, > > please add right baudrate and partition scheme for NAS 4220 > > Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Thanks Hans! I folded this into the NAS 4220 device tree and added your Signed-off-by to the patch. Yours, Linus Walleij
HI Linus On Tue, 7 Feb 2017, Linus Walleij wrote: > On Sun, Feb 5, 2017 at 10:53 AM, Hans Ulli Kroll > <ulli.kroll@googlemail.com> wrote: > > > Hi Linus, > > > > please add right baudrate and partition scheme for NAS 4220 > > > > Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> > > Thanks Hans! I folded this into the NAS 4220 device tree > and added your Signed-off-by to the patch. > You can remove the PCI entries I've seen on your git tree. NAS 4220 has no PCI interface Greetings Hans Ulli Kroll
On Wed, Feb 8, 2017 at 1:55 PM, Hans Ulli Kroll <ulli.kroll@googlemail.com> wrote: > On Tue, 7 Feb 2017, Linus Walleij wrote: > >> On Sun, Feb 5, 2017 at 10:53 AM, Hans Ulli Kroll >> <ulli.kroll@googlemail.com> wrote: >> >> > Hi Linus, >> > >> > please add right baudrate and partition scheme for NAS 4220 >> > >> > Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> >> >> Thanks Hans! I folded this into the NAS 4220 device tree >> and added your Signed-off-by to the patch. >> > > You can remove the PCI entries I've seen on your git tree. > NAS 4220 has no PCI interface OK! I just assumed it was on that machine since you were commenting on the driver, I cut it now. Yours, Linus Walleij
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 0b30cdeb2354..7668ba52158e 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "console=ttyS0,115200n8"; + bootargs = "console=ttyS0,19200n8"; stdout-path = &uart0; }; @@ -64,7 +64,39 @@ status = "okay"; /* 16MB of flash */ reg = <0x30000000 0x01000000>; - /* TODO: add flash partitions here */ + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@20000 { + label = "Kernel"; + reg = <0x00020000 0x00300000>; + }; + partition@320000 { + label = "Ramdisk"; + reg = <0x00320000 0x00600000>; + }; + partition@920000 { + label = "Application"; + reg = <0x00920000 0x00600000>; + }; + partition@f20000 { + label = "VCTL"; + reg = <0x00f20000 0x00020000>; + read-only; + }; + partition@f40000 { + label = "CurConf"; + reg = <0x00f40000 0x000a0000>; + read-only; + }; + partition@fe0000 { + label = "FIS directory"; + reg = <0x00fe0000 0x00020000>; + read-only; + }; }; }; };
Hi Linus, please add right baudrate and partition scheme for NAS 4220 Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> --- arch/arm/boot/dts/gemini-nas4220b.dts | 36 +++++++++++++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-)