| Message ID | cbe84305-803a-5431-9246-0b30d6f135b0@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 14/02/17 20:06, Heiner Kallweit wrote: > So far the driver name is used for the interrupt. Therefore in > /proc/interrupts we can't tell which interrupt belongs to which > SD_EMMC port. > So let's use the device name instead (what is the OF node name). > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > --- > drivers/mmc/host/meson-gx-mmc.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index a67c811e..1a76c925 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -757,9 +757,9 @@ static int meson_mmc_probe(struct platform_device *pdev) > writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS); > writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN); > > - ret = devm_request_threaded_irq(&pdev->dev, host->irq, > - meson_mmc_irq, meson_mmc_irq_thread, > - IRQF_SHARED, DRIVER_NAME, host); > + ret = devm_request_threaded_irq(&pdev->dev, host->irq, meson_mmc_irq, > + meson_mmc_irq_thread, IRQF_SHARED, > + dev_name(&pdev->dev), host); > if (ret) > goto free_host; > I am surpised that the default is not to use dev_name(dev), I wonder if that should be something that devm_request_threaded_irq() could be updated to do.
Heiner Kallweit <hkallweit1@gmail.com> writes: > So far the driver name is used for the interrupt. Therefore in > /proc/interrupts we can't tell which interrupt belongs to which > SD_EMMC port. > So let's use the device name instead (what is the OF node name). > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> > --- > drivers/mmc/host/meson-gx-mmc.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index a67c811e..1a76c925 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -757,9 +757,9 @@ static int meson_mmc_probe(struct platform_device *pdev) > writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS); > writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN); > > - ret = devm_request_threaded_irq(&pdev->dev, host->irq, > - meson_mmc_irq, meson_mmc_irq_thread, > - IRQF_SHARED, DRIVER_NAME, host); > + ret = devm_request_threaded_irq(&pdev->dev, host->irq, meson_mmc_irq, > + meson_mmc_irq_thread, IRQF_SHARED, > + dev_name(&pdev->dev), host); > if (ret) > goto free_host; -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am 15.02.2017 um 13:34 schrieb Ben Dooks: > On 14/02/17 20:06, Heiner Kallweit wrote: >> So far the driver name is used for the interrupt. Therefore in >> /proc/interrupts we can't tell which interrupt belongs to which >> SD_EMMC port. >> So let's use the device name instead (what is the OF node name). >> >> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >> --- >> drivers/mmc/host/meson-gx-mmc.c | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >> index a67c811e..1a76c925 100644 >> --- a/drivers/mmc/host/meson-gx-mmc.c >> +++ b/drivers/mmc/host/meson-gx-mmc.c >> @@ -757,9 +757,9 @@ static int meson_mmc_probe(struct platform_device *pdev) >> writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS); >> writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN); >> >> - ret = devm_request_threaded_irq(&pdev->dev, host->irq, >> - meson_mmc_irq, meson_mmc_irq_thread, >> - IRQF_SHARED, DRIVER_NAME, host); >> + ret = devm_request_threaded_irq(&pdev->dev, host->irq, meson_mmc_irq, >> + meson_mmc_irq_thread, IRQF_SHARED, >> + dev_name(&pdev->dev), host); >> if (ret) >> goto free_host; >> > > I am surpised that the default is not to use dev_name(dev), I wonder if > that should be something that devm_request_threaded_irq() could be > updated to do. > I asked myself the same question and submitted a patch: https://lkml.org/lkml/2017/2/12/80 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index a67c811e..1a76c925 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -757,9 +757,9 @@ static int meson_mmc_probe(struct platform_device *pdev) writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS); writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN); - ret = devm_request_threaded_irq(&pdev->dev, host->irq, - meson_mmc_irq, meson_mmc_irq_thread, - IRQF_SHARED, DRIVER_NAME, host); + ret = devm_request_threaded_irq(&pdev->dev, host->irq, meson_mmc_irq, + meson_mmc_irq_thread, IRQF_SHARED, + dev_name(&pdev->dev), host); if (ret) goto free_host;
So far the driver name is used for the interrupt. Therefore in /proc/interrupts we can't tell which interrupt belongs to which SD_EMMC port. So let's use the device name instead (what is the OF node name). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/mmc/host/meson-gx-mmc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)