Message ID | 651c407e-bc38-5adc-a388-5a45854808e1@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Heiner Kallweit <hkallweit1@gmail.com> writes: > Config values which are not changed during runtime we can set > in the probe function already. > The block size setting is overwritten later in > meson_mmc_start_cmd anyway if needed, so it doesn't harm if we > remove this setting in meson_mmc_set_ios. > > In addition: > - write config register only if configuration changed > - Initialize clocks after other config registers have been initialized > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> > --- > drivers/mmc/host/meson-gx-mmc.c | 37 +++++++++++++++++++++---------------- > 1 file changed, 21 insertions(+), 16 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 806554b1..25b46d36 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -385,15 +385,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT); > val |= bus_width << CFG_BUS_WIDTH_SHIFT; > > - val &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); > - val |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT; > - > - val &= ~(CFG_RESP_TIMEOUT_MASK << CFG_RESP_TIMEOUT_SHIFT); > - val |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT; > - > - val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT); > - val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT; > - > val &= ~CFG_DDR; > if (ios->timing == MMC_TIMING_UHS_DDR50 || > ios->timing == MMC_TIMING_MMC_DDR52 || > @@ -404,11 +395,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > if (ios->timing == MMC_TIMING_MMC_HS400) > val |= CFG_CHK_DS; > > - writel(val, host->regs + SD_EMMC_CFG); > - > - if (val != orig) > + if (val != orig) { > + writel(val, host->regs + SD_EMMC_CFG); > dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n", > __func__, orig, val); > + } > } > > static void meson_mmc_request_done(struct mmc_host *mmc, > @@ -675,6 +666,17 @@ static int meson_mmc_get_cd(struct mmc_host *mmc) > return status; > } > > +static void meson_mmc_cfg_init(struct meson_host *host) > +{ > + u32 cfg = 0; > + > + cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT; > + cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT; > + cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT; > + > + writel(cfg, host->regs + SD_EMMC_CFG); > +} > + > static const struct mmc_host_ops meson_mmc_ops = { > .request = meson_mmc_request, > .set_ios = meson_mmc_set_ios, > @@ -735,10 +737,6 @@ static int meson_mmc_probe(struct platform_device *pdev) > if (ret) > goto free_host; > > - ret = meson_mmc_clk_init(host); > - if (ret) > - goto free_host; > - > /* Stop execution */ > writel(0, host->regs + SD_EMMC_START); > > @@ -747,6 +745,13 @@ static int meson_mmc_probe(struct platform_device *pdev) > writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS); > writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN); > > + /* set config to sane default */ > + meson_mmc_cfg_init(host); > + > + ret = meson_mmc_clk_init(host); > + if (ret) > + goto free_host; > + > ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq, > meson_mmc_irq_thread, IRQF_SHARED, > dev_name(&pdev->dev), host); -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 806554b1..25b46d36 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -385,15 +385,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT); val |= bus_width << CFG_BUS_WIDTH_SHIFT; - val &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); - val |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT; - - val &= ~(CFG_RESP_TIMEOUT_MASK << CFG_RESP_TIMEOUT_SHIFT); - val |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT; - - val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT); - val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT; - val &= ~CFG_DDR; if (ios->timing == MMC_TIMING_UHS_DDR50 || ios->timing == MMC_TIMING_MMC_DDR52 || @@ -404,11 +395,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->timing == MMC_TIMING_MMC_HS400) val |= CFG_CHK_DS; - writel(val, host->regs + SD_EMMC_CFG); - - if (val != orig) + if (val != orig) { + writel(val, host->regs + SD_EMMC_CFG); dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n", __func__, orig, val); + } } static void meson_mmc_request_done(struct mmc_host *mmc, @@ -675,6 +666,17 @@ static int meson_mmc_get_cd(struct mmc_host *mmc) return status; } +static void meson_mmc_cfg_init(struct meson_host *host) +{ + u32 cfg = 0; + + cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT; + cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT; + cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT; + + writel(cfg, host->regs + SD_EMMC_CFG); +} + static const struct mmc_host_ops meson_mmc_ops = { .request = meson_mmc_request, .set_ios = meson_mmc_set_ios, @@ -735,10 +737,6 @@ static int meson_mmc_probe(struct platform_device *pdev) if (ret) goto free_host; - ret = meson_mmc_clk_init(host); - if (ret) - goto free_host; - /* Stop execution */ writel(0, host->regs + SD_EMMC_START); @@ -747,6 +745,13 @@ static int meson_mmc_probe(struct platform_device *pdev) writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS); writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN); + /* set config to sane default */ + meson_mmc_cfg_init(host); + + ret = meson_mmc_clk_init(host); + if (ret) + goto free_host; + ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq, meson_mmc_irq_thread, IRQF_SHARED, dev_name(&pdev->dev), host);
Config values which are not changed during runtime we can set in the probe function already. The block size setting is overwritten later in meson_mmc_start_cmd anyway if needed, so it doesn't harm if we remove this setting in meson_mmc_set_ios. In addition: - write config register only if configuration changed - Initialize clocks after other config registers have been initialized Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/mmc/host/meson-gx-mmc.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-)