| Message ID | bac15e8c-6f17-e96c-0f43-01db0df74a1b@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Heiner Kallweit <hkallweit1@gmail.com> writes: > Stopping execution at the beginning of command processing (again) is > not needed as reading SD_EMMC_CMD_RSP implicitely stops execution. > We just have to take care of the case that a command doesn't return a > response. Therefore read SD_EMMC_CMD_RSP always. > > In addition we can read the response in the main irq handler already, > we don't have to do this in the threaded handler. > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> > --- > drivers/mmc/host/meson-gx-mmc.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 25b46d36..6721aee2 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -510,9 +510,6 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) > > WARN_ON(host->mrq != NULL); > > - /* Stop execution */ > - writel(0, host->regs + SD_EMMC_START); > - > host->mrq = mrq; > meson_mmc_start_cmd(mmc, mrq->cmd); > } > @@ -521,12 +518,16 @@ static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) > { > struct meson_host *host = mmc_priv(mmc); > > + /* > + * reading SD_EMMC_CMD_RSP stops processing, therefore read > + * this register even if command has no response > + */ > if (cmd->flags & MMC_RSP_136) { > cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3); > cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2); > cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1); > cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP); > - } else if (cmd->flags & MMC_RSP_PRESENT) { > + } else { > cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP); > } > } > @@ -564,6 +565,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) > goto out; > } > > + meson_mmc_read_resp(host->mmc, cmd); > + > cmd->error = 0; > if (status & IRQ_RXD_ERR_MASK) { > dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); > @@ -610,10 +613,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) > /* ack all (enabled) interrupts */ > writel(status, host->regs + SD_EMMC_STATUS); > > - if (ret == IRQ_HANDLED) { > - meson_mmc_read_resp(host->mmc, cmd); > + if (ret == IRQ_HANDLED) > meson_mmc_request_done(host->mmc, cmd->mrq); > - } > > spin_unlock(&host->lock); > return ret; > @@ -643,7 +644,6 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) > data->bytes_xfered = xfer_bytes; > } > > - meson_mmc_read_resp(host->mmc, cmd); > if (mmc_op_multi(cmd->opcode)) > meson_mmc_start_cmd(host->mmc, data->stop); > else -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 25b46d36..6721aee2 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -510,9 +510,6 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) WARN_ON(host->mrq != NULL); - /* Stop execution */ - writel(0, host->regs + SD_EMMC_START); - host->mrq = mrq; meson_mmc_start_cmd(mmc, mrq->cmd); } @@ -521,12 +518,16 @@ static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) { struct meson_host *host = mmc_priv(mmc); + /* + * reading SD_EMMC_CMD_RSP stops processing, therefore read + * this register even if command has no response + */ if (cmd->flags & MMC_RSP_136) { cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3); cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2); cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1); cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP); - } else if (cmd->flags & MMC_RSP_PRESENT) { + } else { cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP); } } @@ -564,6 +565,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) goto out; } + meson_mmc_read_resp(host->mmc, cmd); + cmd->error = 0; if (status & IRQ_RXD_ERR_MASK) { dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); @@ -610,10 +613,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) /* ack all (enabled) interrupts */ writel(status, host->regs + SD_EMMC_STATUS); - if (ret == IRQ_HANDLED) { - meson_mmc_read_resp(host->mmc, cmd); + if (ret == IRQ_HANDLED) meson_mmc_request_done(host->mmc, cmd->mrq); - } spin_unlock(&host->lock); return ret; @@ -643,7 +644,6 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) data->bytes_xfered = xfer_bytes; } - meson_mmc_read_resp(host->mmc, cmd); if (mmc_op_multi(cmd->opcode)) meson_mmc_start_cmd(host->mmc, data->stop); else
Stopping execution at the beginning of command processing (again) is not needed as reading SD_EMMC_CMD_RSP implicitely stops execution. We just have to take care of the case that a command doesn't return a response. Therefore read SD_EMMC_CMD_RSP always. In addition we can read the response in the main irq handler already, we don't have to do this in the threaded handler. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/mmc/host/meson-gx-mmc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)