| Message ID | f891a0bd-62f3-8104-5658-5e8fb2d9e070@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Heiner Kallweit <hkallweit1@gmail.com> writes: > I don't think this clk_disable_unprepare is right here. We do this > in meson_mmc_remove what should be sufficient. I don't think so, because if _clk_init() fails, then _probe will fail, and the driver's ->remove() will not be called. Kevin > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > --- > drivers/mmc/host/meson-gx-mmc.c | 6 +----- > 1 file changed, 1 insertion(+), 5 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 74ceda75..39904fb5 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -315,11 +315,7 @@ static int meson_mmc_clk_init(struct meson_host *host) > /* Get the nearest minimum clock to 400KHz */ > host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); > > - ret = meson_mmc_clk_set(host, host->mmc->f_min); > - if (!ret) > - clk_disable_unprepare(host->cfg_div_clk); > - > - return ret; > + return meson_mmc_clk_set(host, host->mmc->f_min); > } > > static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am 15.02.2017 um 20:27 schrieb Kevin Hilman: > Heiner Kallweit <hkallweit1@gmail.com> writes: > >> I don't think this clk_disable_unprepare is right here. We do this >> in meson_mmc_remove what should be sufficient. > > I don't think so, because if _clk_init() fails, then _probe will fail, > and the driver's ->remove() will not be called. > In general, then the condition should be "if (ret)", not "if (!ret)". And if _clk_init() fails, then probe jumps to label free_host, where we have exactly this clk_disable_unprepare(host->cfg_div_clk) Heiner > Kevin > >> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >> --- >> drivers/mmc/host/meson-gx-mmc.c | 6 +----- >> 1 file changed, 1 insertion(+), 5 deletions(-) >> >> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >> index 74ceda75..39904fb5 100644 >> --- a/drivers/mmc/host/meson-gx-mmc.c >> +++ b/drivers/mmc/host/meson-gx-mmc.c >> @@ -315,11 +315,7 @@ static int meson_mmc_clk_init(struct meson_host *host) >> /* Get the nearest minimum clock to 400KHz */ >> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); >> >> - ret = meson_mmc_clk_set(host, host->mmc->f_min); >> - if (!ret) >> - clk_disable_unprepare(host->cfg_div_clk); >> - >> - return ret; >> + return meson_mmc_clk_set(host, host->mmc->f_min); >> } >> >> static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Heiner Kallweit <hkallweit1@gmail.com> writes: > Am 15.02.2017 um 20:27 schrieb Kevin Hilman: >> Heiner Kallweit <hkallweit1@gmail.com> writes: >> >>> I don't think this clk_disable_unprepare is right here. We do this >>> in meson_mmc_remove what should be sufficient. >> >> I don't think so, because if _clk_init() fails, then _probe will fail, >> and the driver's ->remove() will not be called. >> > In general, then the condition should be "if (ret)", not "if (!ret)". > And if _clk_init() fails, then probe jumps to label free_host, > where we have exactly this clk_disable_unprepare(host->cfg_div_clk) Then you need to update the changelog, which refers to remove, not the cleanup in probe. Kevin >> Kevin >> >>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >>> --- >>> drivers/mmc/host/meson-gx-mmc.c | 6 +----- >>> 1 file changed, 1 insertion(+), 5 deletions(-) >>> >>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>> index 74ceda75..39904fb5 100644 >>> --- a/drivers/mmc/host/meson-gx-mmc.c >>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>> @@ -315,11 +315,7 @@ static int meson_mmc_clk_init(struct meson_host *host) >>> /* Get the nearest minimum clock to 400KHz */ >>> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); >>> >>> - ret = meson_mmc_clk_set(host, host->mmc->f_min); >>> - if (!ret) >>> - clk_disable_unprepare(host->cfg_div_clk); >>> - >>> - return ret; >>> + return meson_mmc_clk_set(host, host->mmc->f_min); >>> } >>> >>> static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) >> -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am 16.02.2017 um 00:56 schrieb Kevin Hilman: > Heiner Kallweit <hkallweit1@gmail.com> writes: > >> Am 15.02.2017 um 20:27 schrieb Kevin Hilman: >>> Heiner Kallweit <hkallweit1@gmail.com> writes: >>> >>>> I don't think this clk_disable_unprepare is right here. We do this >>>> in meson_mmc_remove what should be sufficient. >>> >>> I don't think so, because if _clk_init() fails, then _probe will fail, >>> and the driver's ->remove() will not be called. >>> >> In general, then the condition should be "if (ret)", not "if (!ret)". >> And if _clk_init() fails, then probe jumps to label free_host, >> where we have exactly this clk_disable_unprepare(host->cfg_div_clk) > > Then you need to update the changelog, which refers to remove, not the > cleanup in probe. > Sure .. > Kevin > >>> Kevin >>> >>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >>>> --- >>>> drivers/mmc/host/meson-gx-mmc.c | 6 +----- >>>> 1 file changed, 1 insertion(+), 5 deletions(-) >>>> >>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>>> index 74ceda75..39904fb5 100644 >>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>> @@ -315,11 +315,7 @@ static int meson_mmc_clk_init(struct meson_host *host) >>>> /* Get the nearest minimum clock to 400KHz */ >>>> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); >>>> >>>> - ret = meson_mmc_clk_set(host, host->mmc->f_min); >>>> - if (!ret) >>>> - clk_disable_unprepare(host->cfg_div_clk); >>>> - >>>> - return ret; >>>> + return meson_mmc_clk_set(host, host->mmc->f_min); >>>> } >>>> >>>> static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) >>> > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 74ceda75..39904fb5 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -315,11 +315,7 @@ static int meson_mmc_clk_init(struct meson_host *host) /* Get the nearest minimum clock to 400KHz */ host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); - ret = meson_mmc_clk_set(host, host->mmc->f_min); - if (!ret) - clk_disable_unprepare(host->cfg_div_clk); - - return ret; + return meson_mmc_clk_set(host, host->mmc->f_min); } static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
I don't think this clk_disable_unprepare is right here. We do this in meson_mmc_remove what should be sufficient. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/mmc/host/meson-gx-mmc.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)