| Message ID | 1486740274-25958-2-git-send-email-yannick.fertre@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Feb 10, 2017 at 04:24:28PM +0100, Yannick Fertre wrote: > Signed-off-by: Yannick Fertre <yannick.fertre@st.com> > --- > .../devicetree/bindings/display/st,stm32-ltdc.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt > > diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt > new file mode 100644 > index 0000000..b93e1c8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt > @@ -0,0 +1,37 @@ > +* STMicroelectronics STM32 lcd-tft display controller > + > +- ltdc: lcd-tft display controller host > + must be a sub-node of st-display-subsystem > + Required properties: > + - compatible: "st,stm32-ltdc" Kind of generic. There's only one version for all stm32 parts? > + - reg: Physical base address of the IP registers and length of memory mapped region. > + - clocks: A list of phandle + clock-specifier pairs, one for each > + entry in 'clock-names'. > + - clock-names: A list of clock names. For ltdc it should contain: > + - "clk-lcd" for the clock feeding the output pixel clock & IP clock. > + - resets: reset to be used by the device (defined by use of RCC macro). > + Required nodes: > + - Video port for RGB output. > + > +Example: > + > +/ { > + ... > + soc { > + ... > + ltdc: stm32-ltdc@40016800 { display-controller@... > + compatible = "st,stm32-ltdc"; > + reg = <0x40016800 0x200>; > + interrupts = <88>, <89>; > + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; > + clocks = <&rcc 1 CLK_LCD>; > + clock-names = "lcd"; > + status = "disabled"; Don't need to show status in examples. > + > + port { > + ltdc_out_rgb: endpoint { > + }; > + }; > + }; > + }; > +}; > -- > 1.9.1 >
On 02/16/2017 04:15 AM, Rob Herring wrote: > On Fri, Feb 10, 2017 at 04:24:28PM +0100, Yannick Fertre wrote: >> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> >> --- >> .../devicetree/bindings/display/st,stm32-ltdc.txt | 37 ++++++++++++++++++++++ >> 1 file changed, 37 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt >> >> diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt >> new file mode 100644 >> index 0000000..b93e1c8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt >> @@ -0,0 +1,37 @@ >> +* STMicroelectronics STM32 lcd-tft display controller >> + >> +- ltdc: lcd-tft display controller host >> + must be a sub-node of st-display-subsystem >> + Required properties: >> + - compatible: "st,stm32-ltdc" > > Kind of generic. There's only one version for all stm32 parts? Hi Rob, ltdc is the IP use for all stm32. Several options could be set depending on stm32. Fortunately, ltdc contains several registers which describes all options. Br > >> + - reg: Physical base address of the IP registers and length of memory mapped region. >> + - clocks: A list of phandle + clock-specifier pairs, one for each >> + entry in 'clock-names'. >> + - clock-names: A list of clock names. For ltdc it should contain: >> + - "clk-lcd" for the clock feeding the output pixel clock & IP clock. >> + - resets: reset to be used by the device (defined by use of RCC macro). >> + Required nodes: >> + - Video port for RGB output. >> + >> +Example: >> + >> +/ { >> + ... >> + soc { >> + ... >> + ltdc: stm32-ltdc@40016800 { > > display-controller@... OK > >> + compatible = "st,stm32-ltdc"; >> + reg = <0x40016800 0x200>; >> + interrupts = <88>, <89>; >> + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; >> + clocks = <&rcc 1 CLK_LCD>; >> + clock-names = "lcd"; >> + status = "disabled"; > > Don't need to show status in examples. OK > >> + >> + port { >> + ltdc_out_rgb: endpoint { >> + }; >> + }; >> + }; >> + }; >> +}; >> -- >> 1.9.1 >>
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt new file mode 100644 index 0000000..b93e1c8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -0,0 +1,37 @@ +* STMicroelectronics STM32 lcd-tft display controller + +- ltdc: lcd-tft display controller host + must be a sub-node of st-display-subsystem + Required properties: + - compatible: "st,stm32-ltdc" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For ltdc it should contain: + - "clk-lcd" for the clock feeding the output pixel clock & IP clock. + - resets: reset to be used by the device (defined by use of RCC macro). + Required nodes: + - Video port for RGB output. + +Example: + +/ { + ... + soc { + ... + ltdc: stm32-ltdc@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + status = "disabled"; + + port { + ltdc_out_rgb: endpoint { + }; + }; + }; + }; +};
Signed-off-by: Yannick Fertre <yannick.fertre@st.com> --- .../devicetree/bindings/display/st,stm32-ltdc.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt