| Message ID | 8419d592-1338-d7eb-3a75-342b64897922@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze: > The condition should be "if (ret)" as the disable/unprepare is > supposed to be executed if the previous command fails. > In addition adjust the error path in probe to properly deal > with the case that cfg_div_clk can be registered successfully > but enable/prepare fails. > In this case we shouldn't call clk_disable_unprepare. > > Reported-by: Michał Zegan <webczat_200@poczta.onet.pl> > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > --- > v2: > - extended commit message > v3: > - adjust error path in probe > --- > drivers/mmc/host/meson-gx-mmc.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 68e76fa8..002e4aac 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host) > host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); > > ret = meson_mmc_clk_set(host, host->mmc->f_min); > - if (!ret) > + if (ret) > clk_disable_unprepare(host->cfg_div_clk); > > return ret; > @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev) > meson_mmc_irq_thread, IRQF_SHARED, > DRIVER_NAME, host); > if (ret) > - goto free_host; > + goto err_div_clk; > > mmc->max_blk_count = CMD_CFG_LENGTH_MASK; > mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; > @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev) > if (host->bounce_buf == NULL) { > dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); > ret = -ENOMEM; > - goto free_host; > + goto err_div_clk; > } > > mmc->ops = &meson_mmc_ops; > @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev) > > return 0; > > -free_host: > +err_div_clk: > clk_disable_unprepare(host->cfg_div_clk); > +free_host: > clk_disable_unprepare(host->core_clk); > mmc_free_host(mmc); > return ret; > Doesn't the same problem exist with a core clock? It also could error when being enabled, and it will be disabled even if not enabled before...
Am 18.02.2017 um 14:57 schrieb Michał Zegan: > > > W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze: >> The condition should be "if (ret)" as the disable/unprepare is >> supposed to be executed if the previous command fails. >> In addition adjust the error path in probe to properly deal >> with the case that cfg_div_clk can be registered successfully >> but enable/prepare fails. >> In this case we shouldn't call clk_disable_unprepare. >> >> Reported-by: Michał Zegan <webczat_200@poczta.onet.pl> >> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >> --- >> v2: >> - extended commit message >> v3: >> - adjust error path in probe >> --- >> drivers/mmc/host/meson-gx-mmc.c | 9 +++++---- >> 1 file changed, 5 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >> index 68e76fa8..002e4aac 100644 >> --- a/drivers/mmc/host/meson-gx-mmc.c >> +++ b/drivers/mmc/host/meson-gx-mmc.c >> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host) >> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); >> >> ret = meson_mmc_clk_set(host, host->mmc->f_min); >> - if (!ret) >> + if (ret) >> clk_disable_unprepare(host->cfg_div_clk); >> >> return ret; >> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev) >> meson_mmc_irq_thread, IRQF_SHARED, >> DRIVER_NAME, host); >> if (ret) >> - goto free_host; >> + goto err_div_clk; >> >> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev) >> if (host->bounce_buf == NULL) { >> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); >> ret = -ENOMEM; >> - goto free_host; >> + goto err_div_clk; >> } >> >> mmc->ops = &meson_mmc_ops; >> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev) >> >> return 0; >> >> -free_host: >> +err_div_clk: >> clk_disable_unprepare(host->cfg_div_clk); >> +free_host: >> clk_disable_unprepare(host->core_clk); >> mmc_free_host(mmc); >> return ret; >> > Doesn't the same problem exist with a core clock? It also could error > when being enabled, and it will be disabled even if not enabled before... > Yes, there it's basically the same issue. Feel free to submit a patch. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
W dniu 18.02.2017 o 16:22, Heiner Kallweit pisze: > Am 18.02.2017 um 14:57 schrieb Michał Zegan: >> >> >> W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze: >>> The condition should be "if (ret)" as the disable/unprepare is >>> supposed to be executed if the previous command fails. >>> In addition adjust the error path in probe to properly deal >>> with the case that cfg_div_clk can be registered successfully >>> but enable/prepare fails. >>> In this case we shouldn't call clk_disable_unprepare. >>> >>> Reported-by: Michał Zegan <webczat_200@poczta.onet.pl> >>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >>> --- >>> v2: >>> - extended commit message >>> v3: >>> - adjust error path in probe >>> --- >>> drivers/mmc/host/meson-gx-mmc.c | 9 +++++---- >>> 1 file changed, 5 insertions(+), 4 deletions(-) >>> >>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>> index 68e76fa8..002e4aac 100644 >>> --- a/drivers/mmc/host/meson-gx-mmc.c >>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host) >>> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); >>> >>> ret = meson_mmc_clk_set(host, host->mmc->f_min); >>> - if (!ret) >>> + if (ret) >>> clk_disable_unprepare(host->cfg_div_clk); >>> >>> return ret; >>> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev) >>> meson_mmc_irq_thread, IRQF_SHARED, >>> DRIVER_NAME, host); >>> if (ret) >>> - goto free_host; >>> + goto err_div_clk; >>> >>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev) >>> if (host->bounce_buf == NULL) { >>> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); >>> ret = -ENOMEM; >>> - goto free_host; >>> + goto err_div_clk; >>> } >>> >>> mmc->ops = &meson_mmc_ops; >>> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev) >>> >>> return 0; >>> >>> -free_host: >>> +err_div_clk: >>> clk_disable_unprepare(host->cfg_div_clk); >>> +free_host: >>> clk_disable_unprepare(host->core_clk); >>> mmc_free_host(mmc); >>> return ret; >>> >> Doesn't the same problem exist with a core clock? It also could error >> when being enabled, and it will be disabled even if not enabled before... >> > Yes, there it's basically the same issue. Feel free to submit a patch. > Okay, I will submit a patch based on this series to fix that too, thanks. Reviewed-by: Michał Zegan <webczat@webczatnet.pl>
Heiner Kallweit <hkallweit1@gmail.com> writes: > The condition should be "if (ret)" as the disable/unprepare is > supposed to be executed if the previous command fails. > In addition adjust the error path in probe to properly deal > with the case that cfg_div_clk can be registered successfully > but enable/prepare fails. > In this case we shouldn't call clk_disable_unprepare. > > Reported-by: Michał Zegan <webczat_200@poczta.onet.pl> > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> > --- > v2: > - extended commit message > v3: > - adjust error path in probe > --- > drivers/mmc/host/meson-gx-mmc.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 68e76fa8..002e4aac 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host) > host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); > > ret = meson_mmc_clk_set(host, host->mmc->f_min); > - if (!ret) > + if (ret) > clk_disable_unprepare(host->cfg_div_clk); > > return ret; > @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev) > meson_mmc_irq_thread, IRQF_SHARED, > DRIVER_NAME, host); > if (ret) > - goto free_host; > + goto err_div_clk; > > mmc->max_blk_count = CMD_CFG_LENGTH_MASK; > mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; > @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev) > if (host->bounce_buf == NULL) { > dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); > ret = -ENOMEM; > - goto free_host; > + goto err_div_clk; > } > > mmc->ops = &meson_mmc_ops; > @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev) > > return 0; > > -free_host: > +err_div_clk: > clk_disable_unprepare(host->cfg_div_clk); > +free_host: > clk_disable_unprepare(host->core_clk); > mmc_free_host(mmc); > return ret; -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 68e76fa8..002e4aac 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host) host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); ret = meson_mmc_clk_set(host, host->mmc->f_min); - if (!ret) + if (ret) clk_disable_unprepare(host->cfg_div_clk); return ret; @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev) meson_mmc_irq_thread, IRQF_SHARED, DRIVER_NAME, host); if (ret) - goto free_host; + goto err_div_clk; mmc->max_blk_count = CMD_CFG_LENGTH_MASK; mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev) if (host->bounce_buf == NULL) { dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); ret = -ENOMEM; - goto free_host; + goto err_div_clk; } mmc->ops = &meson_mmc_ops; @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev) return 0; -free_host: +err_div_clk: clk_disable_unprepare(host->cfg_div_clk); +free_host: clk_disable_unprepare(host->core_clk); mmc_free_host(mmc); return ret;
The condition should be "if (ret)" as the disable/unprepare is supposed to be executed if the previous command fails. In addition adjust the error path in probe to properly deal with the case that cfg_div_clk can be registered successfully but enable/prepare fails. In this case we shouldn't call clk_disable_unprepare. Reported-by: Michał Zegan <webczat_200@poczta.onet.pl> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- v2: - extended commit message v3: - adjust error path in probe --- drivers/mmc/host/meson-gx-mmc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)