| Message ID | 1487752716-14824-3-git-send-email-xuejiancheng@hisilicon.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 22 Feb 2017, Jiancheng Xue wrote: > Add basic dts files for hi3798cv200-poplar board. Poplar is the > first development board compliant with the 96Boards Enterprise > edition TV Platform specification. The board features the > Hi3798CV200 with an integrated quad-core 64-bit ARM Cortex A53 > processor and high performance Mali T720 GPU. > > Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> > Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> > --- > Changed Log: > v2: > - Fixed issues pointed by Rob Herring. > 1. Moved the led node out of the soc node. > 2. Restrained the ranges property of soc node smaller. > - Refined the patch according to Andreas's suggestions. > - Enabled gmac1 device node instead of gmac0. > - Added a compatible string "syscon" for crg nodes. > > arch/arm64/boot/dts/hisilicon/Makefile | 1 + > .../boot/dts/hisilicon/hi3798cv200-poplar.dts | 171 +++++++++ > arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 415 +++++++++++++++++++++ > 3 files changed, 587 insertions(+) > create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi > > diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile > index c3a6c19..8960eca 100644 > --- a/arch/arm64/boot/dts/hisilicon/Makefile > +++ b/arch/arm64/boot/dts/hisilicon/Makefile > @@ -1,4 +1,5 @@ > dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb > +dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb > dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb > dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb > dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb > diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > new file mode 100644 > index 0000000..967853a > --- /dev/null > +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > @@ -0,0 +1,171 @@ > +/* > + * DTS File for HiSilicon Poplar Development Board > + * > + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include "hi3798cv200.dtsi" > + > +/ { > + model = "HiSilicon Poplar Development Board"; > + compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x80000000>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + user-led0 { > + label = "USER-LED0"; > + gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + }; > + > + user-led1 { > + label = "USER-LED1"; > + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "mmc0"; > + default-state = "off"; > + }; > + > + user-led2 { > + label = "USER-LED2"; > + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "none"; > + default-state = "off"; > + }; > + > + user-led3 { > + label = "USER-LED3"; > + gpios = <&gpio10 6 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "cpu0"; > + default-state = "off"; > + }; > + }; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > + label = "LS-UART0"; > +}; > +/* No optional LS-UART1 on Low Speed Expansion Connector. */ > + > +&i2c0 { > + status = "okay"; > + label = "LS-I2C0"; > +}; > + > +&i2c2 { > + status = "okay"; > + label = "LS-I2C1"; > +}; > + > +&spi0 { > + status = "okay"; > + label = "LS-SPI0"; > +}; > + > +&gpio1 { > + status = "okay"; > + gpio-line-names = "LS-GPIO-E", "", > + "", "", > + "", "LS-GPIO-F", > + "", "LS-GPIO-J"; > +}; > + > +&gpio2 { > + status = "okay"; > + gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", > + "LS-GPIO-L", "LS-GPIO-G", > + "LS-GPIO-K", "", > + "", ""; > +}; > + > +&gpio3 { > + status = "okay"; > + gpio-line-names = "", "", > + "", "", > + "LS-GPIO-C", "", > + "", "LS-GPIO-B"; > +}; > + > +&gpio4 { > + status = "okay"; > + gpio-line-names = "", "", > + "", "", > + "", "LS-GPIO-D", > + "", ""; > +}; > + > +&gpio5 { > + status = "okay"; > + gpio-line-names = "", "USER-LED-1", > + "USER-LED-2", "", > + "", "LS-GPIO-A", > + "", ""; > +}; > + > +&gpio6 { > + status = "okay"; > + gpio-line-names = "", "", > + "", "USER-LED-0", > + "", "", > + "", ""; > +}; > + > +&gpio10 { > + status = "okay"; > + gpio-line-names = "", "", > + "", "", > + "", "", > + "USER-LED-3", ""; > +}; > + > +&gmac1 { > + status = "okay"; > + #address-cells = <1>; > + #size-cells = <0>; > + phy-handle = <ð_phy1>; > + phy-mode = "rgmii"; > + hisilicon,phy-reset-delays-us = <10000 10000 30000>; > + > + eth_phy1: phy@3 { > + reg = <3>; > + }; > +}; > + > +&ir { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi > new file mode 100644 > index 0000000..3974dd4 > --- /dev/null > +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi > @@ -0,0 +1,415 @@ > +/* > + * DTS File for HiSilicon Hi3798cv200 SoC. > + * > + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <dt-bindings/clock/histb-clock.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/reset/ti-syscon.h> > + > +/ { > + compatible = "hisilicon,hi3798cv200"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu@0 { > + compatible = "arm,cortex-a53"; > + device_type = "cpu"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + }; > + > + cpu@1 { > + compatible = "arm,cortex-a53"; > + device_type = "cpu"; > + reg = <0x0 0x1>; > + enable-method = "psci"; > + }; > + > + cpu@2 { > + compatible = "arm,cortex-a53"; > + device_type = "cpu"; > + reg = <0x0 0x2>; > + enable-method = "psci"; > + }; > + > + cpu@3 { > + compatible = "arm,cortex-a53"; > + device_type = "cpu"; > + reg = <0x0 0x3>; > + enable-method = "psci"; > + }; > + }; > + > + gic: interrupt-controller@f1001000 { > + compatible = "arm,gic-400"; > + reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */ > + <0x0 0xf1002000 0x0 0x100>; /* GICC */ > + #address-cells = <0>; > + #interrupt-cells = <3>; > + interrupt-controller; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + }; > + > + soc: soc@f0000000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0xf0000000 0x10000000>; > + > + crg: clock-reset-controller@8a22000 { > + compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd"; > + reg = <0x8a22000 0x1000>; > + #clock-cells = <1>; > + #reset-cells = <2>; > + > + gmacphyrst: reset-controller { > + compatible = "ti,syscon-reset"; > + #reset-cells = <1>; > + ti,reset-bits = > + <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR|DEASSERT_SET|STATUS_NONE)>, /* 0: gmac0-phy-rst */ > + <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR|DEASSERT_SET|STATUS_NONE)>; /* 1: gmac1-phy-rst */ > + }; > + }; > + > + sysctrl: system-controller@8000000 { > + compatible = "hisilicon,hi3798cv200-sysctrl", "syscon"; > + reg = <0x8000000 0x1000>; > + #clock-cells = <1>; > + #reset-cells = <2>; > + }; > + > + uart0: serial@8b00000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0x8b00000 0x1000>; > + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&sysctrl HISTB_UART0_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + uart2: serial@8b02000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0x8b02000 0x1000>; > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&crg HISTB_UART2_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + i2c0: i2c@8b10000 { > + compatible = "hisilicon,hix5hd2-i2c"; > + reg = <0x8b10000 0x1000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <400000>; > + clocks = <&crg HISTB_I2C0_CLK>; > + status = "disabled"; > + }; > + > + i2c1: i2c@8b11000 { > + compatible = "hisilicon,hix5hd2-i2c"; > + reg = <0x8b11000 0x1000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <400000>; > + clocks = <&crg HISTB_I2C1_CLK>; > + status = "disabled"; > + }; > + > + i2c2: i2c@8b12000 { > + compatible = "hisilicon,hix5hd2-i2c"; > + reg = <0x8b12000 0x1000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <400000>; > + clocks = <&crg HISTB_I2C2_CLK>; > + status = "disabled"; > + }; > + > + i2c3: i2c@8b13000 { > + compatible = "hisilicon,hix5hd2-i2c"; > + reg = <0x8b13000 0x1000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <400000>; > + clocks = <&crg HISTB_I2C3_CLK>; > + status = "disabled"; > + }; > + > + i2c4: i2c@8b14000 { > + compatible = "hisilicon,hix5hd2-i2c"; > + reg = <0x8b14000 0x1000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <400000>; > + clocks = <&crg HISTB_I2C4_CLK>; > + status = "disabled"; > + }; > + > + spi0: spi@8b1a000 { > + compatible = "arm,pl022", "arm,primecell"; > + reg = <0x8b1a000 0x1000>; > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; > + num-cs = <1>; > + cs-gpios = <&gpio7 1 0>; > + clocks = <&crg HISTB_SPI0_CLK>; > + clock-names = "apb_pclk"; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + emmc: mmc@9830000 { > + compatible = "snps,dw-mshc"; > + reg = <0x9830000 0x10000>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&crg HISTB_MMC_CIU_CLK>, > + <&crg HISTB_MMC_BIU_CLK>; > + clock-names = "ciu", "biu"; > + }; > + > + gpio0: gpio@8b20000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b20000 0x1000>; > + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio1: gpio@8b21000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b21000 0x1000>; > + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio2: gpio@8b22000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b22000 0x1000>; > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio3: gpio@8b23000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b23000 0x1000>; > + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio4: gpio@8b24000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b24000 0x1000>; > + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio5: gpio@8004000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8004000 0x1000>; > + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio6: gpio@8b26000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b26000 0x1000>; > + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio7: gpio@8b27000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b27000 0x1000>; > + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio8: gpio@8b28000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b28000 0x1000>; > + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio9: gpio@8b29000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b29000 0x1000>; > + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio10: gpio@8b2a000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b2a000 0x1000>; > + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio11: gpio@8b2b000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b2b000 0x1000>; > + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gpio12: gpio@8b2c000 { > + compatible = "arm,pl061", "arm,primecell"; > + reg = <0x8b2c000 0x1000>; > + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + clocks = <&crg HISTB_APB_CLK>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + gmac0: ethernet@9840000 { > + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; > + reg = <0x9840000 0x1000>, > + <0x984300c 0x4>; > + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&crg HISTB_ETH0_MAC_CLK>, > + <&crg HISTB_ETH0_MACIF_CLK>; > + clock-names = "mac_core", "mac_ifc"; > + resets = <&crg 0xcc 8>, > + <&crg 0xcc 10>, > + <&gmacphyrst 0>; > + reset-names = "mac_core", "mac_ifc", "phy"; > + status = "disabled"; > + }; > + > + gmac1: ethernet@9841000 { > + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; > + reg = <0x9841000 0x1000>, > + <0x9843010 0x4>; > + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&crg HISTB_ETH1_MAC_CLK>, > + <&crg HISTB_ETH1_MACIF_CLK>; > + clock-names = "mac_core", "mac_ifc"; > + resets = <&crg 0xcc 9>, > + <&crg 0xcc 11>, > + <&gmacphyrst 1>; > + reset-names = "mac_core", "mac_ifc", "phy"; > + status = "disabled"; > + }; > + > + ir: ir@8001000 { > + compatible = "hisilicon,hix5hd2-ir"; > + reg = <0x8001000 0x1000>; > + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&sysctrl HISTB_IR_CLK>; > + status = "disabled"; > + }; > + }; > +};
Am 22.02.2017 um 09:38 schrieb Jiancheng Xue: > Add basic dts files for hi3798cv200-poplar board. Poplar is the > first development board compliant with the 96Boards Enterprise > edition TV Platform specification. The board features the "Enterprise Edition" > Hi3798CV200 with an integrated quad-core 64-bit ARM Cortex A53 > processor and high performance Mali T720 GPU. > > Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com> > Reviewed-by: Alex Elder <elder@linaro.org> > --- > Changed Log: > v2: > - Fixed issues pointed by Rob Herring. > 1. Moved the led node out of the soc node. > 2. Restrained the ranges property of soc node smaller. > - Refined the patch according to Andreas's suggestions. > - Enabled gmac1 device node instead of gmac0. > - Added a compatible string "syscon" for crg nodes. > > arch/arm64/boot/dts/hisilicon/Makefile | 1 + > .../boot/dts/hisilicon/hi3798cv200-poplar.dts | 171 +++++++++ > arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 415 +++++++++++++++++++++ > 3 files changed, 587 insertions(+) > create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi > > diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile > index c3a6c19..8960eca 100644 > --- a/arch/arm64/boot/dts/hisilicon/Makefile > +++ b/arch/arm64/boot/dts/hisilicon/Makefile > @@ -1,4 +1,5 @@ > dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb > +dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb > dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb > dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb > dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb > diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > new file mode 100644 > index 0000000..967853a > --- /dev/null > +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > @@ -0,0 +1,171 @@ > +/* > + * DTS File for HiSilicon Poplar Development Board > + * > + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. Rob has requested that new DT files use SPDX-License-Identifier, i.e.: SPDX-License-Identifier: GPL-2.0+ although I believe dual-licensing is generally preferred for DT files: SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include "hi3798cv200.dtsi" > + > +/ { > + model = "HiSilicon Poplar Development Board"; > + compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200"; > + > + aliases { > + serial0 = &uart0; No alias for uart2? > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x80000000>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + user-led0 { > + label = "USER-LED0"; > + gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + }; > + > + user-led1 { > + label = "USER-LED1"; > + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "mmc0"; > + default-state = "off"; > + }; > + > + user-led2 { > + label = "USER-LED2"; > + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "none"; > + default-state = "off"; > + }; > + > + user-led3 { > + label = "USER-LED3"; > + gpios = <&gpio10 6 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "cpu0"; > + default-state = "off"; > + }; > + }; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > + label = "LS-UART0"; > +}; > +/* No optional LS-UART1 on Low Speed Expansion Connector. */ > + > +&i2c0 { > + status = "okay"; > + label = "LS-I2C0"; > +}; > + > +&i2c2 { > + status = "okay"; > + label = "LS-I2C1"; > +}; > + > +&spi0 { > + status = "okay"; > + label = "LS-SPI0"; > +}; > + > +&gpio1 { > + status = "okay"; > + gpio-line-names = "LS-GPIO-E", "", > + "", "", > + "", "LS-GPIO-F", > + "", "LS-GPIO-J"; > +}; > + > +&gpio2 { > + status = "okay"; > + gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", > + "LS-GPIO-L", "LS-GPIO-G", > + "LS-GPIO-K", "", > + "", ""; > +}; > + > +&gpio3 { > + status = "okay"; > + gpio-line-names = "", "", > + "", "", > + "LS-GPIO-C", "", > + "", "LS-GPIO-B"; > +}; > + > +&gpio4 { > + status = "okay"; > + gpio-line-names = "", "", > + "", "", > + "", "LS-GPIO-D", > + "", ""; > +}; > + > +&gpio5 { > + status = "okay"; > + gpio-line-names = "", "USER-LED-1", > + "USER-LED-2", "", > + "", "LS-GPIO-A", > + "", ""; > +}; > + > +&gpio6 { > + status = "okay"; > + gpio-line-names = "", "", > + "", "USER-LED-0", > + "", "", > + "", ""; > +}; > + > +&gpio10 { > + status = "okay"; > + gpio-line-names = "", "", > + "", "", > + "", "", > + "USER-LED-3", ""; > +}; > + > +&gmac1 { > + status = "okay"; > + #address-cells = <1>; > + #size-cells = <0>; > + phy-handle = <ð_phy1>; > + phy-mode = "rgmii"; > + hisilicon,phy-reset-delays-us = <10000 10000 30000>; > + > + eth_phy1: phy@3 { > + reg = <3>; > + }; > +}; > + > +&ir { > + status = "okay"; > +}; The node sort order seems quite random; suggest alphabetically. > diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi > new file mode 100644 > index 0000000..3974dd4 > --- /dev/null > +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi > @@ -0,0 +1,415 @@ > +/* > + * DTS File for HiSilicon Hi3798cv200 SoC. > + * > + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. SPDX-License-Identifier > + */ [snip] Regards, Andreas
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index c3a6c19..8960eca 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb +dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts new file mode 100644 index 0000000..967853a --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -0,0 +1,171 @@ +/* + * DTS File for HiSilicon Poplar Development Board + * + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "hi3798cv200.dtsi" + +/ { + model = "HiSilicon Poplar Development Board"; + compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + + user-led0 { + label = "USER-LED0"; + gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + user-led1 { + label = "USER-LED1"; + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + user-led2 { + label = "USER-LED2"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + user-led3 { + label = "USER-LED3"; + gpios = <&gpio10 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; + label = "LS-UART0"; +}; +/* No optional LS-UART1 on Low Speed Expansion Connector. */ + +&i2c0 { + status = "okay"; + label = "LS-I2C0"; +}; + +&i2c2 { + status = "okay"; + label = "LS-I2C1"; +}; + +&spi0 { + status = "okay"; + label = "LS-SPI0"; +}; + +&gpio1 { + status = "okay"; + gpio-line-names = "LS-GPIO-E", "", + "", "", + "", "LS-GPIO-F", + "", "LS-GPIO-J"; +}; + +&gpio2 { + status = "okay"; + gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", + "LS-GPIO-L", "LS-GPIO-G", + "LS-GPIO-K", "", + "", ""; +}; + +&gpio3 { + status = "okay"; + gpio-line-names = "", "", + "", "", + "LS-GPIO-C", "", + "", "LS-GPIO-B"; +}; + +&gpio4 { + status = "okay"; + gpio-line-names = "", "", + "", "", + "", "LS-GPIO-D", + "", ""; +}; + +&gpio5 { + status = "okay"; + gpio-line-names = "", "USER-LED-1", + "USER-LED-2", "", + "", "LS-GPIO-A", + "", ""; +}; + +&gpio6 { + status = "okay"; + gpio-line-names = "", "", + "", "USER-LED-0", + "", "", + "", ""; +}; + +&gpio10 { + status = "okay"; + gpio-line-names = "", "", + "", "", + "", "", + "USER-LED-3", ""; +}; + +&gmac1 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + phy-handle = <ð_phy1>; + phy-mode = "rgmii"; + hisilicon,phy-reset-delays-us = <10000 10000 30000>; + + eth_phy1: phy@3 { + reg = <3>; + }; +}; + +&ir { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi new file mode 100644 index 0000000..3974dd4 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -0,0 +1,415 @@ +/* + * DTS File for HiSilicon Hi3798cv200 SoC. + * + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <dt-bindings/clock/histb-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/ti-syscon.h> + +/ { + compatible = "hisilicon,hi3798cv200"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */ + <0x0 0xf1002000 0x0 0x100>; /* GICC */ + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc: soc@f0000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xf0000000 0x10000000>; + + crg: clock-reset-controller@8a22000 { + compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd"; + reg = <0x8a22000 0x1000>; + #clock-cells = <1>; + #reset-cells = <2>; + + gmacphyrst: reset-controller { + compatible = "ti,syscon-reset"; + #reset-cells = <1>; + ti,reset-bits = + <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR|DEASSERT_SET|STATUS_NONE)>, /* 0: gmac0-phy-rst */ + <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR|DEASSERT_SET|STATUS_NONE)>; /* 1: gmac1-phy-rst */ + }; + }; + + sysctrl: system-controller@8000000 { + compatible = "hisilicon,hi3798cv200-sysctrl", "syscon"; + reg = <0x8000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <2>; + }; + + uart0: serial@8b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x8b00000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysctrl HISTB_UART0_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@8b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x8b02000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_UART2_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + i2c0: i2c@8b10000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b10000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C0_CLK>; + status = "disabled"; + }; + + i2c1: i2c@8b11000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b11000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C1_CLK>; + status = "disabled"; + }; + + i2c2: i2c@8b12000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b12000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C2_CLK>; + status = "disabled"; + }; + + i2c3: i2c@8b13000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b13000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C3_CLK>; + status = "disabled"; + }; + + i2c4: i2c@8b14000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b14000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C4_CLK>; + status = "disabled"; + }; + + spi0: spi@8b1a000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x8b1a000 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <1>; + cs-gpios = <&gpio7 1 0>; + clocks = <&crg HISTB_SPI0_CLK>; + clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + emmc: mmc@9830000 { + compatible = "snps,dw-mshc"; + reg = <0x9830000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_MMC_CIU_CLK>, + <&crg HISTB_MMC_BIU_CLK>; + clock-names = "ciu", "biu"; + }; + + gpio0: gpio@8b20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b20000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio1: gpio@8b21000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b21000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio2: gpio@8b22000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b22000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio3: gpio@8b23000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b23000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio4: gpio@8b24000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b24000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio5: gpio@8004000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8004000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio6: gpio@8b26000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b26000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio7: gpio@8b27000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b27000 0x1000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio8: gpio@8b28000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b28000 0x1000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio9: gpio@8b29000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b29000 0x1000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio10: gpio@8b2a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b2a000 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio11: gpio@8b2b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b2b000 0x1000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio12: gpio@8b2c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b2c000 0x1000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gmac0: ethernet@9840000 { + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; + reg = <0x9840000 0x1000>, + <0x984300c 0x4>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_ETH0_MAC_CLK>, + <&crg HISTB_ETH0_MACIF_CLK>; + clock-names = "mac_core", "mac_ifc"; + resets = <&crg 0xcc 8>, + <&crg 0xcc 10>, + <&gmacphyrst 0>; + reset-names = "mac_core", "mac_ifc", "phy"; + status = "disabled"; + }; + + gmac1: ethernet@9841000 { + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; + reg = <0x9841000 0x1000>, + <0x9843010 0x4>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_ETH1_MAC_CLK>, + <&crg HISTB_ETH1_MACIF_CLK>; + clock-names = "mac_core", "mac_ifc"; + resets = <&crg 0xcc 9>, + <&crg 0xcc 11>, + <&gmacphyrst 1>; + reset-names = "mac_core", "mac_ifc", "phy"; + status = "disabled"; + }; + + ir: ir@8001000 { + compatible = "hisilicon,hix5hd2-ir"; + reg = <0x8001000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysctrl HISTB_IR_CLK>; + status = "disabled"; + }; + }; +};