| Message ID | 61406c0ba992f2fa5b5180b790a1ef3fa38d9567.1488876832.git-series.maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
Hi, On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The A10s has an HDMI controller connected to the second TCON channel. Add > it to our DT. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++++++++++- > arch/arm/boot/dts/sun5i.dtsi | 1 +- > 2 files changed, 35 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi > index 074485782a4a..3482c9d2b120 100644 > --- a/arch/arm/boot/dts/sun5i-a10s.dtsi > +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi > @@ -72,7 +72,33 @@ > }; > }; > > + display-engine { > + compatible = "allwinner,sun5i-a10s-display-engine", > + "allwinner,sun5i-a13-display-engine"; > + allwinner,pipelines = <&fe0>; > + }; > + > soc@01c00000 { > + hdmi0: hdmi@01c16000 { Nit: is the 0 suffix needed? I don't see any indication that there is a second controller. > + compatible = "allwinner,sun5i-a10s-hdmi"; > + reg = <0x01c16000 0x1000>; > + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, > + <&ccu CLK_PLL_VIDEO0_2X>, > + <&ccu CLK_PLL_VIDEO1_2X>; > + clock-names = "ahb", "mod", "pll-0", "pll-1"; > + status = "disabled"; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + hdmi0_in_tcon0: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&tcon0_out_hdmi0>; > + }; > + }; > + }; > + > pwm: pwm@01c20e00 { > compatible = "allwinner,sun5i-a10s-pwm"; > reg = <0x01c20e00 0xc>; > @@ -129,3 +155,11 @@ > > &sram_a { > }; > + > +&tcon0_out { > + tcon0_out_hdmi0: endpoint@2 { > + reg = <2>; > + remote-endpoint = <&hdmi0_in_tcon0>; > + allwinner,tcon-channel = <1>; > + }; > +}; > diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi > index f3b6e19244f9..3d009b2aa42a 100644 > --- a/arch/arm/boot/dts/sun5i.dtsi > +++ b/arch/arm/boot/dts/sun5i.dtsi > @@ -273,6 +273,7 @@ > tcon0_out_tve0: endpoint@1 { > reg = <1>; > remote-endpoint = <&tve0_in_tcon0>; > + allwinner,tcon-channel = <1>; This looks like a separate patch, probably following the binding change? Regards ChenYu > }; > }; > }; > -- > git-series 0.8.11 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
1;4601;0c On Wed, Mar 08, 2017 at 11:35:39AM +0800, Chen-Yu Tsai wrote: > Hi, > > On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard > <maxime.ripard@free-electrons.com> wrote: > > The A10s has an HDMI controller connected to the second TCON channel. Add > > it to our DT. > > > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > > --- > > arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++++++++++- > > arch/arm/boot/dts/sun5i.dtsi | 1 +- > > 2 files changed, 35 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi > > index 074485782a4a..3482c9d2b120 100644 > > --- a/arch/arm/boot/dts/sun5i-a10s.dtsi > > +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi > > @@ -72,7 +72,33 @@ > > }; > > }; > > > > + display-engine { > > + compatible = "allwinner,sun5i-a10s-display-engine", > > + "allwinner,sun5i-a13-display-engine"; > > + allwinner,pipelines = <&fe0>; > > + }; > > + > > soc@01c00000 { > > + hdmi0: hdmi@01c16000 { > > Nit: is the 0 suffix needed? I don't see any indication that there is > a second controller. > > > + compatible = "allwinner,sun5i-a10s-hdmi"; > > + reg = <0x01c16000 0x1000>; > > + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, > > + <&ccu CLK_PLL_VIDEO0_2X>, > > + <&ccu CLK_PLL_VIDEO1_2X>; > > + clock-names = "ahb", "mod", "pll-0", "pll-1"; > > + status = "disabled"; > > + > > + port { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + hdmi0_in_tcon0: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&tcon0_out_hdmi0>; > > + }; > > + }; > > + }; > > + > > pwm: pwm@01c20e00 { > > compatible = "allwinner,sun5i-a10s-pwm"; > > reg = <0x01c20e00 0xc>; > > @@ -129,3 +155,11 @@ > > > > &sram_a { > > }; > > + > > +&tcon0_out { > > + tcon0_out_hdmi0: endpoint@2 { > > + reg = <2>; > > + remote-endpoint = <&hdmi0_in_tcon0>; > > + allwinner,tcon-channel = <1>; > > + }; > > +}; > > diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi > > index f3b6e19244f9..3d009b2aa42a 100644 > > --- a/arch/arm/boot/dts/sun5i.dtsi > > +++ b/arch/arm/boot/dts/sun5i.dtsi > > @@ -273,6 +273,7 @@ > > tcon0_out_tve0: endpoint@1 { > > reg = <1>; > > remote-endpoint = <&tve0_in_tcon0>; > > + allwinner,tcon-channel = <1>; > > This looks like a separate patch, probably following the binding > change? I don't know, the binding says that without anything specified, reg would be used. I was assuming that we only needed it once we had the new endpoint to make it consistent, therefore it didn't need an extra patch. But I can definitely create one if you want. Maxime
On Thu, Mar 9, 2017 at 6:59 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > 1;4601;0c > On Wed, Mar 08, 2017 at 11:35:39AM +0800, Chen-Yu Tsai wrote: >> Hi, >> >> On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard >> <maxime.ripard@free-electrons.com> wrote: >> > The A10s has an HDMI controller connected to the second TCON channel. Add >> > it to our DT. >> > >> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> >> > --- >> > arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++++++++++- >> > arch/arm/boot/dts/sun5i.dtsi | 1 +- >> > 2 files changed, 35 insertions(+), 0 deletions(-) >> > >> > diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi >> > index 074485782a4a..3482c9d2b120 100644 >> > --- a/arch/arm/boot/dts/sun5i-a10s.dtsi >> > +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi >> > @@ -72,7 +72,33 @@ >> > }; >> > }; >> > >> > + display-engine { >> > + compatible = "allwinner,sun5i-a10s-display-engine", >> > + "allwinner,sun5i-a13-display-engine"; >> > + allwinner,pipelines = <&fe0>; >> > + }; >> > + >> > soc@01c00000 { >> > + hdmi0: hdmi@01c16000 { >> >> Nit: is the 0 suffix needed? I don't see any indication that there is >> a second controller. >> >> > + compatible = "allwinner,sun5i-a10s-hdmi"; >> > + reg = <0x01c16000 0x1000>; >> > + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, >> > + <&ccu CLK_PLL_VIDEO0_2X>, >> > + <&ccu CLK_PLL_VIDEO1_2X>; >> > + clock-names = "ahb", "mod", "pll-0", "pll-1"; >> > + status = "disabled"; >> > + >> > + port { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + hdmi0_in_tcon0: endpoint@0 { >> > + reg = <0>; >> > + remote-endpoint = <&tcon0_out_hdmi0>; >> > + }; >> > + }; >> > + }; >> > + >> > pwm: pwm@01c20e00 { >> > compatible = "allwinner,sun5i-a10s-pwm"; >> > reg = <0x01c20e00 0xc>; >> > @@ -129,3 +155,11 @@ >> > >> > &sram_a { >> > }; >> > + >> > +&tcon0_out { >> > + tcon0_out_hdmi0: endpoint@2 { >> > + reg = <2>; >> > + remote-endpoint = <&hdmi0_in_tcon0>; >> > + allwinner,tcon-channel = <1>; >> > + }; >> > +}; >> > diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi >> > index f3b6e19244f9..3d009b2aa42a 100644 >> > --- a/arch/arm/boot/dts/sun5i.dtsi >> > +++ b/arch/arm/boot/dts/sun5i.dtsi >> > @@ -273,6 +273,7 @@ >> > tcon0_out_tve0: endpoint@1 { >> > reg = <1>; >> > remote-endpoint = <&tve0_in_tcon0>; >> > + allwinner,tcon-channel = <1>; >> >> This looks like a separate patch, probably following the binding >> change? > > I don't know, the binding says that without anything specified, reg > would be used. I was assuming that we only needed it once we had the > new endpoint to make it consistent, therefore it didn't need an extra > patch. > > But I can definitely create one if you want. It just seems a bit out of place, that's all. Mentioning it in the commit message would be good enough for me. ChenYu > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 074485782a4a..3482c9d2b120 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -72,7 +72,33 @@ }; }; + display-engine { + compatible = "allwinner,sun5i-a10s-display-engine", + "allwinner,sun5i-a13-display-engine"; + allwinner,pipelines = <&fe0>; + }; + soc@01c00000 { + hdmi0: hdmi@01c16000 { + compatible = "allwinner,sun5i-a10s-hdmi"; + reg = <0x01c16000 0x1000>; + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + hdmi0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi0>; + }; + }; + }; + pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; @@ -129,3 +155,11 @@ &sram_a { }; + +&tcon0_out { + tcon0_out_hdmi0: endpoint@2 { + reg = <2>; + remote-endpoint = <&hdmi0_in_tcon0>; + allwinner,tcon-channel = <1>; + }; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index f3b6e19244f9..3d009b2aa42a 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -273,6 +273,7 @@ tcon0_out_tve0: endpoint@1 { reg = <1>; remote-endpoint = <&tve0_in_tcon0>; + allwinner,tcon-channel = <1>; }; }; };
The A10s has an HDMI controller connected to the second TCON channel. Add it to our DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++++++++++- arch/arm/boot/dts/sun5i.dtsi | 1 +- 2 files changed, 35 insertions(+), 0 deletions(-)