| Message ID | 148879924465.10733.17814546240558419917.stgit@acox1-desk1.ger.corp.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
OK, so I discovered that these patches are for a driver added to linux-next without it ever been cross-posted to linux-media. To be polite, I think that's rather impolite. I'm now reviewing patches for a driver I haven't seen, so that makes me rather unhappy. Please cross-post staging/media drivers to linux-media! Regards, Hans On 06/03/17 12:21, Alan Cox wrote: > The two drivers were originally merged by tools, and the tools didn't always > spot white space only changes. Fix a few of them found by zero-day and clean > up some more by hand. > > Signed-off-by: Alan Cox <alan@linux.intel.com> > --- > .../media/atomisp/pci/atomisp2/atomisp_cmd.c | 29 ------- > .../media/atomisp/pci/atomisp2/atomisp_ioctl.c | 21 ----- > .../media/atomisp/pci/atomisp2/atomisp_subdev.c | 81 -------------------- > .../media/atomisp/pci/atomisp2/atomisp_v4l2.c | 8 -- > 4 files changed, 6 insertions(+), 133 deletions(-) > > diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c > index e99f7b8..d9a5c24 100644 > --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c > +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c > @@ -1099,15 +1099,9 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error, > WARN_ON(!vb); > if (vb) > pipe->frame_config_id[vb->i] = frame->isp_config_id; > -#ifndef ISP2401 > if (css_pipe_id == IA_CSS_PIPE_ID_CAPTURE && > asd->pending_capture_request > 0) { > err = atomisp_css_offline_capture_configure(asd, > -#else > - if (css_pipe_id == IA_CSS_PIPE_ID_CAPTURE) { > - if (asd->pending_capture_request > 0) { > - err = atomisp_css_offline_capture_configure(asd, > -#endif > asd->params.offline_parm.num_captures, > asd->params.offline_parm.skip_frames, > asd->params.offline_parm.offset); > @@ -1298,9 +1292,7 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error, > */ > wake_up(&vb->done); > } > -#ifndef ISP2401 > - > -#else > +#ifdef ISP2401 > atomic_set(&pipe->wdt_count, 0); > #endif > /* > @@ -4995,26 +4987,15 @@ int atomisp_try_fmt(struct video_device *vdev, struct v4l2_format *f, > { > struct atomisp_device *isp = video_get_drvdata(vdev); > struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd; > -#ifndef ISP2401 > struct v4l2_subdev_pad_config pad_cfg; > -#else > - struct v4l2_subdev_pad_config pad_cfg; > -#endif > struct v4l2_subdev_format format = { > .which = V4L2_SUBDEV_FORMAT_TRY, > -#ifndef ISP2401 > }; > -#else > - }; > -#endif > + > struct v4l2_mbus_framefmt *snr_mbus_fmt = &format.format; > const struct atomisp_format_bridge *fmt; > struct atomisp_input_stream_info *stream_info = > -#ifndef ISP2401 > (struct atomisp_input_stream_info *)snr_mbus_fmt->reserved; > -#else > - (struct atomisp_input_stream_info *)snr_mbus_fmt->reserved; > -#endif > uint16_t stream_index; > int source_pad = atomisp_subdev_source_pad(vdev); > int ret; > @@ -5044,11 +5025,7 @@ int atomisp_try_fmt(struct video_device *vdev, struct v4l2_format *f, > snr_mbus_fmt->width, snr_mbus_fmt->height); > > ret = v4l2_subdev_call(isp->inputs[asd->input_curr].camera, > -#ifndef ISP2401 > pad, set_fmt, &pad_cfg, &format); > -#else > - pad, set_fmt, &pad_cfg, &format); > -#endif > if (ret) > return ret; > > @@ -6454,9 +6431,7 @@ int atomisp_s_ae_window(struct atomisp_sub_device *asd, > struct atomisp_ae_window *arg) > { > struct atomisp_device *isp = asd->isp; > -#ifndef ISP2401 > /* Coverity CID 298071 - initialzize struct */ > -#endif > struct v4l2_subdev_selection sel = { 0 }; > > sel.r.left = arg->x_left; > diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c > index 1445279..6064bb8 100644 > --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c > +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c > @@ -530,13 +530,8 @@ const struct atomisp_format_bridge *atomisp_get_format_bridge( > return NULL; > } > > -#ifndef ISP2401 > const struct atomisp_format_bridge *atomisp_get_format_bridge_from_mbus( > u32 mbus_code) > -#else > -const struct atomisp_format_bridge *atomisp_get_format_bridge_from_mbus(u32 > - mbus_code) > -#endif > { > unsigned int i; > > @@ -1303,14 +1298,8 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) > /* this buffer will have a per-frame parameter */ > pipe->frame_request_config_id[buf->index] = buf->reserved2 & > ~ATOMISP_BUFFER_HAS_PER_FRAME_SETTING; > -#ifndef ISP2401 > dev_dbg(isp->dev, "This buffer requires per_frame setting which has isp_config_id %d\n", > pipe->frame_request_config_id[buf->index]); > -#else > - dev_dbg(isp->dev, "This buffer requires per_frame setting \ > - which has isp_config_id %d\n", > - pipe->frame_request_config_id[buf->index]); > -#endif > } else { > pipe->frame_request_config_id[buf->index] = 0; > } > @@ -1494,12 +1483,7 @@ static int atomisp_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) > buf->reserved2 = pipe->frame_config_id[buf->index]; > rt_mutex_unlock(&isp->mutex); > > -#ifndef ISP2401 > dev_dbg(isp->dev, "dqbuf buffer %d (%s) for asd%d with exp_id %d, isp_config_id %d\n", > -#else > - dev_dbg(isp->dev, "dqbuf buffer %d (%s) for asd%d with exp_id %d, \ > - isp_config_id %d\n", > -#endif > buf->index, vdev->name, asd->index, buf->reserved >> 16, > buf->reserved2); > return 0; > @@ -1570,12 +1554,9 @@ static unsigned int atomisp_sensor_start_stream(struct atomisp_sub_device *asd) > else > return 1; > } > -#ifndef ISP2401 > -int atomisp_stream_on_master_slave_sensor(struct atomisp_device *isp, bool isp_timeout) > -#else > + > int atomisp_stream_on_master_slave_sensor(struct atomisp_device *isp, > bool isp_timeout) > -#endif > { > unsigned int master = -1, slave = -1, delay_slave = 0; > int i, ret; > diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c > index eecd5fc..3d6bb16 100644 > --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c > +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c > @@ -322,17 +322,10 @@ static void isp_subdev_propagate(struct v4l2_subdev *sd, > r.width = ffmt[pad]->width; > r.height = ffmt[pad]->height; > > -#ifndef ISP2401 > - atomisp_subdev_set_selection(sd, cfg, which, pad, target, flags, > - &r); > + atomisp_subdev_set_selection(sd, cfg, which, pad, > + target, flags, &r); > break; > } > -#else > - atomisp_subdev_set_selection(sd, cfg, which, pad, > - target, flags, &r); > - break; > - } > -#endif > } > } > > @@ -444,19 +437,10 @@ int atomisp_subdev_set_selection(struct v4l2_subdev *sd, > i < ATOMISP_SUBDEV_PADS_NUM; i++) { > struct v4l2_rect tmp = *crop[pad]; > > -#ifndef ISP2401 > atomisp_subdev_set_selection( > sd, cfg, which, i, V4L2_SEL_TGT_COMPOSE, > flags, &tmp); > } > -#else > - atomisp_subdev_set_selection(sd, cfg, > - which, i, > - V4L2_SEL_TGT_COMPOSE, > - flags, > - &tmp); > - } > -#endif > } > > if (which == V4L2_SUBDEV_FORMAT_TRY) > @@ -611,24 +595,14 @@ static int atomisp_get_sensor_bin_factor(struct atomisp_sub_device *asd) > return hbin; > } > > -#ifndef ISP2401 > -void atomisp_subdev_set_ffmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, > - uint32_t which, uint32_t pad, > - struct v4l2_mbus_framefmt *ffmt) > -#else > void atomisp_subdev_set_ffmt(struct v4l2_subdev *sd, > struct v4l2_subdev_pad_config *cfg, uint32_t which, > uint32_t pad, struct v4l2_mbus_framefmt *ffmt) > -#endif > { > struct atomisp_sub_device *isp_sd = v4l2_get_subdevdata(sd); > struct atomisp_device *isp = isp_sd->isp; > struct v4l2_mbus_framefmt *__ffmt = > -#ifndef ISP2401 > atomisp_subdev_get_ffmt(sd, cfg, which, pad); > -#else > - atomisp_subdev_get_ffmt(sd, cfg, which, pad); > -#endif > uint16_t vdev_pad = atomisp_subdev_source_pad(sd->devnode); > enum atomisp_input_stream_id stream_id; > > @@ -692,12 +666,8 @@ void atomisp_subdev_set_ffmt(struct v4l2_subdev *sd, > * to the format type. > */ > static int isp_subdev_get_format(struct v4l2_subdev *sd, > -#ifndef ISP2401 > - struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) > -#else > struct v4l2_subdev_pad_config *cfg, > struct v4l2_subdev_format *fmt) > -#endif > { > fmt->format = *atomisp_subdev_get_ffmt(sd, cfg, fmt->which, fmt->pad); > > @@ -715,12 +685,8 @@ static int isp_subdev_get_format(struct v4l2_subdev *sd, > * to the format type. > */ > static int isp_subdev_set_format(struct v4l2_subdev *sd, > -#ifndef ISP2401 > - struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) > -#else > struct v4l2_subdev_pad_config *cfg, > struct v4l2_subdev_format *fmt) > -#endif > { > atomisp_subdev_set_ffmt(sd, cfg, fmt->which, fmt->pad, &fmt->format); > > @@ -736,30 +702,18 @@ static const struct v4l2_subdev_core_ops isp_subdev_v4l2_core_ops = { > > /* V4L2 subdev pad operations */ > static const struct v4l2_subdev_pad_ops isp_subdev_v4l2_pad_ops = { > -#ifndef ISP2401 > - .enum_mbus_code = isp_subdev_enum_mbus_code, > - .get_fmt = isp_subdev_get_format, .set_fmt = isp_subdev_set_format, > - .get_selection = isp_subdev_get_selection, > - .set_selection = isp_subdev_set_selection, > - .link_validate = v4l2_subdev_link_validate_default, > -#else > .enum_mbus_code = isp_subdev_enum_mbus_code, > .get_fmt = isp_subdev_get_format, > .set_fmt = isp_subdev_set_format, > .get_selection = isp_subdev_get_selection, > .set_selection = isp_subdev_set_selection, > .link_validate = v4l2_subdev_link_validate_default, > -#endif > }; > > /* V4L2 subdev operations */ > static const struct v4l2_subdev_ops isp_subdev_v4l2_ops = { > -#ifndef ISP2401 > - .core = &isp_subdev_v4l2_core_ops, .pad = &isp_subdev_v4l2_pad_ops, > -#else > .core = &isp_subdev_v4l2_core_ops, > .pad = &isp_subdev_v4l2_pad_ops, > -#endif > }; > > static void isp_subdev_init_params(struct atomisp_sub_device *asd) > @@ -1187,12 +1141,8 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd) > pads[ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE].flags = MEDIA_PAD_FL_SOURCE; > pads[ATOMISP_SUBDEV_PAD_SOURCE_VIDEO].flags = MEDIA_PAD_FL_SOURCE; > > -#ifndef ISP2401 > asd->fmt[ATOMISP_SUBDEV_PAD_SINK].fmt.code = > MEDIA_BUS_FMT_SBGGR10_1X10; > -#else > - asd->fmt[ATOMISP_SUBDEV_PAD_SINK].fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10; > -#endif > asd->fmt[ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW].fmt.code = > MEDIA_BUS_FMT_SBGGR10_1X10; > asd->fmt[ATOMISP_SUBDEV_PAD_SOURCE_VF].fmt.code = > @@ -1209,39 +1159,19 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd) > return ret; > > atomisp_init_subdev_pipe(asd, &asd->video_in, > -#ifndef ISP2401 > - V4L2_BUF_TYPE_VIDEO_OUTPUT); > -#else > V4L2_BUF_TYPE_VIDEO_OUTPUT); > -#endif > > atomisp_init_subdev_pipe(asd, &asd->video_out_preview, > -#ifndef ISP2401 > - V4L2_BUF_TYPE_VIDEO_CAPTURE); > -#else > V4L2_BUF_TYPE_VIDEO_CAPTURE); > -#endif > > atomisp_init_subdev_pipe(asd, &asd->video_out_vf, > -#ifndef ISP2401 > - V4L2_BUF_TYPE_VIDEO_CAPTURE); > -#else > V4L2_BUF_TYPE_VIDEO_CAPTURE); > -#endif > > atomisp_init_subdev_pipe(asd, &asd->video_out_capture, > -#ifndef ISP2401 > - V4L2_BUF_TYPE_VIDEO_CAPTURE); > -#else > V4L2_BUF_TYPE_VIDEO_CAPTURE); > -#endif > > atomisp_init_subdev_pipe(asd, &asd->video_out_video_capture, > -#ifndef ISP2401 > - V4L2_BUF_TYPE_VIDEO_CAPTURE); > -#else > V4L2_BUF_TYPE_VIDEO_CAPTURE); > -#endif > > atomisp_init_acc_pipe(asd, &asd->video_acc); > > @@ -1401,11 +1331,7 @@ void atomisp_subdev_cleanup_pending_events(struct atomisp_sub_device *asd) > unsigned int i, pending_event; > > list_for_each_entry_safe(fh, fh_tmp, > -#ifndef ISP2401 > &asd->subdev.devnode->fh_list, list) { > -#else > - &asd->subdev.devnode->fh_list, list) { > -#endif > pending_event = v4l2_event_pending(fh); > for (i = 0; i < pending_event; i++) > v4l2_event_dequeue(fh, &event, 1); > @@ -1471,9 +1397,6 @@ int atomisp_subdev_register_entities(struct atomisp_sub_device *asd, > return ret; > } > > -#ifndef ISP2401 > - > -#endif > /* > * atomisp_subdev_init - ISP Subdevice initialization. > * @dev: Device pointer specific to the ATOM ISP. > diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c > index 9d6d67c..800562d 100644 > --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c > +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c > @@ -906,9 +906,7 @@ static int atomisp_register_entities(struct atomisp_device *isp) > > strlcpy(isp->media_dev.model, "Intel Atom ISP", > sizeof(isp->media_dev.model)); > -#ifndef ISP2401 > > -#endif > media_device_init(&isp->media_dev); > isp->v4l2_dev.mdev = &isp->media_dev; > ret = v4l2_device_register(isp->dev, &isp->v4l2_dev); > @@ -1545,16 +1543,12 @@ static int atomisp_pci_probe(struct pci_dev *dev, > atomisp_msi_irq_uninit(isp, dev); > > atomisp_ospm_dphy_down(isp); > -#ifndef ISP2401 > + > /* Address later when we worry about the ...field chips */ > -#endif > if (ATOMISP_INTERNAL_PM) { > if (atomisp_mrfld_power_down(isp)) > dev_err(&dev->dev, "Failed to switch off ISP\n"); > } > -#ifdef ISP2401 > - > -#endif > pci_dev_put(isp->pci_root); > return err; > } >
On Wed, Mar 08, 2017 at 01:49:23PM +0100, Hans Verkuil wrote: > OK, so I discovered that these patches are for a driver added to linux-next > without it ever been cross-posted to linux-media. > > To be polite, I think that's rather impolite. They were, but got rejected due to the size :( Mauro was cc:ed directly, he knew these were coming... I can take care of the cleanup patches for now, you don't have to review them if you don't want to. thanks, greg k-h
On 08/03/17 14:39, Greg KH wrote: > On Wed, Mar 08, 2017 at 01:49:23PM +0100, Hans Verkuil wrote: >> OK, so I discovered that these patches are for a driver added to linux-next >> without it ever been cross-posted to linux-media. >> >> To be polite, I think that's rather impolite. > > They were, but got rejected due to the size :( > > Mauro was cc:ed directly, he knew these were coming... > > I can take care of the cleanup patches for now, you don't have to review > them if you don't want to. Please do. For the next time if the patches are too large: at least post a message with a link to a repo for people to look at. I would like to know what's going on in staging/media, especially since I will do a lot of the reviewing (at least if it is a V4L2 driver) when they want to move it out of staging. Thanks, Hans
On 08/03/17 14:45, Hans Verkuil wrote: > On 08/03/17 14:39, Greg KH wrote: >> On Wed, Mar 08, 2017 at 01:49:23PM +0100, Hans Verkuil wrote: >>> OK, so I discovered that these patches are for a driver added to linux-next >>> without it ever been cross-posted to linux-media. >>> >>> To be polite, I think that's rather impolite. >> >> They were, but got rejected due to the size :( >> >> Mauro was cc:ed directly, he knew these were coming... >> >> I can take care of the cleanup patches for now, you don't have to review >> them if you don't want to. > > Please do. > > For the next time if the patches are too large: at least post a message with > a link to a repo for people to look at. I would like to know what's going > on in staging/media, especially since I will do a lot of the reviewing (at > least if it is a V4L2 driver) when they want to move it out of staging. Same issue BTW with the bcm2835 driver. That too landed in staging without ever being posted to the linux-media mailinglist. Size is no excuse for that driver since it isn't that large. I'll handle cleanup patches for the bcm2835 driver since it is now in our tree. Regards, Hans
On Wed, Mar 08, 2017 at 02:55:44PM +0100, Hans Verkuil wrote: > On 08/03/17 14:45, Hans Verkuil wrote: > > On 08/03/17 14:39, Greg KH wrote: > > > On Wed, Mar 08, 2017 at 01:49:23PM +0100, Hans Verkuil wrote: > > > > OK, so I discovered that these patches are for a driver added to linux-next > > > > without it ever been cross-posted to linux-media. > > > > > > > > To be polite, I think that's rather impolite. > > > > > > They were, but got rejected due to the size :( > > > > > > Mauro was cc:ed directly, he knew these were coming... > > > > > > I can take care of the cleanup patches for now, you don't have to review > > > them if you don't want to. > > > > Please do. > > > > For the next time if the patches are too large: at least post a message with > > a link to a repo for people to look at. I would like to know what's going > > on in staging/media, especially since I will do a lot of the reviewing (at > > least if it is a V4L2 driver) when they want to move it out of staging. > > Same issue BTW with the bcm2835 driver. That too landed in staging without > ever being posted to the linux-media mailinglist. Size is no excuse for that > driver since it isn't that large. > > I'll handle cleanup patches for the bcm2835 driver since it is now in our tree. Nope, it got moved out as it didn't belong there yet :) It's now in drivers/staging/vc04_services/ as all of the issues so far aren't media ones, but vc04 api issues. Once those get ironed out, then the media people can have at it :) thanks, greg k-h
On 08/03/17 15:20, Greg KH wrote: > On Wed, Mar 08, 2017 at 02:55:44PM +0100, Hans Verkuil wrote: >> On 08/03/17 14:45, Hans Verkuil wrote: >>> On 08/03/17 14:39, Greg KH wrote: >>>> On Wed, Mar 08, 2017 at 01:49:23PM +0100, Hans Verkuil wrote: >>>>> OK, so I discovered that these patches are for a driver added to linux-next >>>>> without it ever been cross-posted to linux-media. >>>>> >>>>> To be polite, I think that's rather impolite. >>>> >>>> They were, but got rejected due to the size :( >>>> >>>> Mauro was cc:ed directly, he knew these were coming... >>>> >>>> I can take care of the cleanup patches for now, you don't have to review >>>> them if you don't want to. >>> >>> Please do. >>> >>> For the next time if the patches are too large: at least post a message with >>> a link to a repo for people to look at. I would like to know what's going >>> on in staging/media, especially since I will do a lot of the reviewing (at >>> least if it is a V4L2 driver) when they want to move it out of staging. >> >> Same issue BTW with the bcm2835 driver. That too landed in staging without >> ever being posted to the linux-media mailinglist. Size is no excuse for that >> driver since it isn't that large. >> >> I'll handle cleanup patches for the bcm2835 driver since it is now in our tree. > > Nope, it got moved out as it didn't belong there yet :) > > It's now in drivers/staging/vc04_services/ as all of the issues so far > aren't media ones, but vc04 api issues. Once those get ironed out, then > the media people can have at it :) OK, then I will ignore bcm2835 patches for now. Good to know! Hans
On 08/03/17 14:55, Hans Verkuil wrote: > On 08/03/17 14:45, Hans Verkuil wrote: >> On 08/03/17 14:39, Greg KH wrote: >>> On Wed, Mar 08, 2017 at 01:49:23PM +0100, Hans Verkuil wrote: >>>> OK, so I discovered that these patches are for a driver added to linux-next >>>> without it ever been cross-posted to linux-media. >>>> >>>> To be polite, I think that's rather impolite. >>> >>> They were, but got rejected due to the size :( >>> >>> Mauro was cc:ed directly, he knew these were coming... >>> >>> I can take care of the cleanup patches for now, you don't have to review >>> them if you don't want to. >> >> Please do. >> >> For the next time if the patches are too large: at least post a message with >> a link to a repo for people to look at. I would like to know what's going >> on in staging/media, especially since I will do a lot of the reviewing (at >> least if it is a V4L2 driver) when they want to move it out of staging. > > Same issue BTW with the bcm2835 driver. That too landed in staging without > ever being posted to the linux-media mailinglist. Size is no excuse for that > driver since it isn't that large. Sorry about the noise. This driver *was* cross-posted to us. Ignore this rant :-) Hans
Em Wed, 8 Mar 2017 14:55:44 +0100 Hans Verkuil <hverkuil@xs4all.nl> escreveu: > On 08/03/17 14:45, Hans Verkuil wrote: > > On 08/03/17 14:39, Greg KH wrote: > >> On Wed, Mar 08, 2017 at 01:49:23PM +0100, Hans Verkuil wrote: > >>> OK, so I discovered that these patches are for a driver added to linux-next > >>> without it ever been cross-posted to linux-media. > >>> > >>> To be polite, I think that's rather impolite. > >> > >> They were, but got rejected due to the size :( > >> > >> Mauro was cc:ed directly, he knew these were coming... > >> > >> I can take care of the cleanup patches for now, you don't have to review > >> them if you don't want to. > > > > Please do. > > > > For the next time if the patches are too large: at least post a message with > > a link to a repo for people to look at. I would like to know what's going > > on in staging/media, especially since I will do a lot of the reviewing (at > > least if it is a V4L2 driver) when they want to move it out of staging. > > Same issue BTW with the bcm2835 driver. That too landed in staging without > ever being posted to the linux-media mailinglist. Size is no excuse for that > driver since it isn't that large. This one got posted at media ML: https://patchwork.linuxtv.org/project/linux-media/list/?state=*&q=2835 (patches 1/6 to 6/6) Thanks, Mauro
diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c index e99f7b8..d9a5c24 100644 --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c @@ -1099,15 +1099,9 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error, WARN_ON(!vb); if (vb) pipe->frame_config_id[vb->i] = frame->isp_config_id; -#ifndef ISP2401 if (css_pipe_id == IA_CSS_PIPE_ID_CAPTURE && asd->pending_capture_request > 0) { err = atomisp_css_offline_capture_configure(asd, -#else - if (css_pipe_id == IA_CSS_PIPE_ID_CAPTURE) { - if (asd->pending_capture_request > 0) { - err = atomisp_css_offline_capture_configure(asd, -#endif asd->params.offline_parm.num_captures, asd->params.offline_parm.skip_frames, asd->params.offline_parm.offset); @@ -1298,9 +1292,7 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error, */ wake_up(&vb->done); } -#ifndef ISP2401 - -#else +#ifdef ISP2401 atomic_set(&pipe->wdt_count, 0); #endif /* @@ -4995,26 +4987,15 @@ int atomisp_try_fmt(struct video_device *vdev, struct v4l2_format *f, { struct atomisp_device *isp = video_get_drvdata(vdev); struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd; -#ifndef ISP2401 struct v4l2_subdev_pad_config pad_cfg; -#else - struct v4l2_subdev_pad_config pad_cfg; -#endif struct v4l2_subdev_format format = { .which = V4L2_SUBDEV_FORMAT_TRY, -#ifndef ISP2401 }; -#else - }; -#endif + struct v4l2_mbus_framefmt *snr_mbus_fmt = &format.format; const struct atomisp_format_bridge *fmt; struct atomisp_input_stream_info *stream_info = -#ifndef ISP2401 (struct atomisp_input_stream_info *)snr_mbus_fmt->reserved; -#else - (struct atomisp_input_stream_info *)snr_mbus_fmt->reserved; -#endif uint16_t stream_index; int source_pad = atomisp_subdev_source_pad(vdev); int ret; @@ -5044,11 +5025,7 @@ int atomisp_try_fmt(struct video_device *vdev, struct v4l2_format *f, snr_mbus_fmt->width, snr_mbus_fmt->height); ret = v4l2_subdev_call(isp->inputs[asd->input_curr].camera, -#ifndef ISP2401 pad, set_fmt, &pad_cfg, &format); -#else - pad, set_fmt, &pad_cfg, &format); -#endif if (ret) return ret; @@ -6454,9 +6431,7 @@ int atomisp_s_ae_window(struct atomisp_sub_device *asd, struct atomisp_ae_window *arg) { struct atomisp_device *isp = asd->isp; -#ifndef ISP2401 /* Coverity CID 298071 - initialzize struct */ -#endif struct v4l2_subdev_selection sel = { 0 }; sel.r.left = arg->x_left; diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c index 1445279..6064bb8 100644 --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c @@ -530,13 +530,8 @@ const struct atomisp_format_bridge *atomisp_get_format_bridge( return NULL; } -#ifndef ISP2401 const struct atomisp_format_bridge *atomisp_get_format_bridge_from_mbus( u32 mbus_code) -#else -const struct atomisp_format_bridge *atomisp_get_format_bridge_from_mbus(u32 - mbus_code) -#endif { unsigned int i; @@ -1303,14 +1298,8 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) /* this buffer will have a per-frame parameter */ pipe->frame_request_config_id[buf->index] = buf->reserved2 & ~ATOMISP_BUFFER_HAS_PER_FRAME_SETTING; -#ifndef ISP2401 dev_dbg(isp->dev, "This buffer requires per_frame setting which has isp_config_id %d\n", pipe->frame_request_config_id[buf->index]); -#else - dev_dbg(isp->dev, "This buffer requires per_frame setting \ - which has isp_config_id %d\n", - pipe->frame_request_config_id[buf->index]); -#endif } else { pipe->frame_request_config_id[buf->index] = 0; } @@ -1494,12 +1483,7 @@ static int atomisp_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) buf->reserved2 = pipe->frame_config_id[buf->index]; rt_mutex_unlock(&isp->mutex); -#ifndef ISP2401 dev_dbg(isp->dev, "dqbuf buffer %d (%s) for asd%d with exp_id %d, isp_config_id %d\n", -#else - dev_dbg(isp->dev, "dqbuf buffer %d (%s) for asd%d with exp_id %d, \ - isp_config_id %d\n", -#endif buf->index, vdev->name, asd->index, buf->reserved >> 16, buf->reserved2); return 0; @@ -1570,12 +1554,9 @@ static unsigned int atomisp_sensor_start_stream(struct atomisp_sub_device *asd) else return 1; } -#ifndef ISP2401 -int atomisp_stream_on_master_slave_sensor(struct atomisp_device *isp, bool isp_timeout) -#else + int atomisp_stream_on_master_slave_sensor(struct atomisp_device *isp, bool isp_timeout) -#endif { unsigned int master = -1, slave = -1, delay_slave = 0; int i, ret; diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c index eecd5fc..3d6bb16 100644 --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_subdev.c @@ -322,17 +322,10 @@ static void isp_subdev_propagate(struct v4l2_subdev *sd, r.width = ffmt[pad]->width; r.height = ffmt[pad]->height; -#ifndef ISP2401 - atomisp_subdev_set_selection(sd, cfg, which, pad, target, flags, - &r); + atomisp_subdev_set_selection(sd, cfg, which, pad, + target, flags, &r); break; } -#else - atomisp_subdev_set_selection(sd, cfg, which, pad, - target, flags, &r); - break; - } -#endif } } @@ -444,19 +437,10 @@ int atomisp_subdev_set_selection(struct v4l2_subdev *sd, i < ATOMISP_SUBDEV_PADS_NUM; i++) { struct v4l2_rect tmp = *crop[pad]; -#ifndef ISP2401 atomisp_subdev_set_selection( sd, cfg, which, i, V4L2_SEL_TGT_COMPOSE, flags, &tmp); } -#else - atomisp_subdev_set_selection(sd, cfg, - which, i, - V4L2_SEL_TGT_COMPOSE, - flags, - &tmp); - } -#endif } if (which == V4L2_SUBDEV_FORMAT_TRY) @@ -611,24 +595,14 @@ static int atomisp_get_sensor_bin_factor(struct atomisp_sub_device *asd) return hbin; } -#ifndef ISP2401 -void atomisp_subdev_set_ffmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, - uint32_t which, uint32_t pad, - struct v4l2_mbus_framefmt *ffmt) -#else void atomisp_subdev_set_ffmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, uint32_t which, uint32_t pad, struct v4l2_mbus_framefmt *ffmt) -#endif { struct atomisp_sub_device *isp_sd = v4l2_get_subdevdata(sd); struct atomisp_device *isp = isp_sd->isp; struct v4l2_mbus_framefmt *__ffmt = -#ifndef ISP2401 atomisp_subdev_get_ffmt(sd, cfg, which, pad); -#else - atomisp_subdev_get_ffmt(sd, cfg, which, pad); -#endif uint16_t vdev_pad = atomisp_subdev_source_pad(sd->devnode); enum atomisp_input_stream_id stream_id; @@ -692,12 +666,8 @@ void atomisp_subdev_set_ffmt(struct v4l2_subdev *sd, * to the format type. */ static int isp_subdev_get_format(struct v4l2_subdev *sd, -#ifndef ISP2401 - struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) -#else struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) -#endif { fmt->format = *atomisp_subdev_get_ffmt(sd, cfg, fmt->which, fmt->pad); @@ -715,12 +685,8 @@ static int isp_subdev_get_format(struct v4l2_subdev *sd, * to the format type. */ static int isp_subdev_set_format(struct v4l2_subdev *sd, -#ifndef ISP2401 - struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) -#else struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) -#endif { atomisp_subdev_set_ffmt(sd, cfg, fmt->which, fmt->pad, &fmt->format); @@ -736,30 +702,18 @@ static const struct v4l2_subdev_core_ops isp_subdev_v4l2_core_ops = { /* V4L2 subdev pad operations */ static const struct v4l2_subdev_pad_ops isp_subdev_v4l2_pad_ops = { -#ifndef ISP2401 - .enum_mbus_code = isp_subdev_enum_mbus_code, - .get_fmt = isp_subdev_get_format, .set_fmt = isp_subdev_set_format, - .get_selection = isp_subdev_get_selection, - .set_selection = isp_subdev_set_selection, - .link_validate = v4l2_subdev_link_validate_default, -#else .enum_mbus_code = isp_subdev_enum_mbus_code, .get_fmt = isp_subdev_get_format, .set_fmt = isp_subdev_set_format, .get_selection = isp_subdev_get_selection, .set_selection = isp_subdev_set_selection, .link_validate = v4l2_subdev_link_validate_default, -#endif }; /* V4L2 subdev operations */ static const struct v4l2_subdev_ops isp_subdev_v4l2_ops = { -#ifndef ISP2401 - .core = &isp_subdev_v4l2_core_ops, .pad = &isp_subdev_v4l2_pad_ops, -#else .core = &isp_subdev_v4l2_core_ops, .pad = &isp_subdev_v4l2_pad_ops, -#endif }; static void isp_subdev_init_params(struct atomisp_sub_device *asd) @@ -1187,12 +1141,8 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd) pads[ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE].flags = MEDIA_PAD_FL_SOURCE; pads[ATOMISP_SUBDEV_PAD_SOURCE_VIDEO].flags = MEDIA_PAD_FL_SOURCE; -#ifndef ISP2401 asd->fmt[ATOMISP_SUBDEV_PAD_SINK].fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10; -#else - asd->fmt[ATOMISP_SUBDEV_PAD_SINK].fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10; -#endif asd->fmt[ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW].fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10; asd->fmt[ATOMISP_SUBDEV_PAD_SOURCE_VF].fmt.code = @@ -1209,39 +1159,19 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd) return ret; atomisp_init_subdev_pipe(asd, &asd->video_in, -#ifndef ISP2401 - V4L2_BUF_TYPE_VIDEO_OUTPUT); -#else V4L2_BUF_TYPE_VIDEO_OUTPUT); -#endif atomisp_init_subdev_pipe(asd, &asd->video_out_preview, -#ifndef ISP2401 - V4L2_BUF_TYPE_VIDEO_CAPTURE); -#else V4L2_BUF_TYPE_VIDEO_CAPTURE); -#endif atomisp_init_subdev_pipe(asd, &asd->video_out_vf, -#ifndef ISP2401 - V4L2_BUF_TYPE_VIDEO_CAPTURE); -#else V4L2_BUF_TYPE_VIDEO_CAPTURE); -#endif atomisp_init_subdev_pipe(asd, &asd->video_out_capture, -#ifndef ISP2401 - V4L2_BUF_TYPE_VIDEO_CAPTURE); -#else V4L2_BUF_TYPE_VIDEO_CAPTURE); -#endif atomisp_init_subdev_pipe(asd, &asd->video_out_video_capture, -#ifndef ISP2401 - V4L2_BUF_TYPE_VIDEO_CAPTURE); -#else V4L2_BUF_TYPE_VIDEO_CAPTURE); -#endif atomisp_init_acc_pipe(asd, &asd->video_acc); @@ -1401,11 +1331,7 @@ void atomisp_subdev_cleanup_pending_events(struct atomisp_sub_device *asd) unsigned int i, pending_event; list_for_each_entry_safe(fh, fh_tmp, -#ifndef ISP2401 &asd->subdev.devnode->fh_list, list) { -#else - &asd->subdev.devnode->fh_list, list) { -#endif pending_event = v4l2_event_pending(fh); for (i = 0; i < pending_event; i++) v4l2_event_dequeue(fh, &event, 1); @@ -1471,9 +1397,6 @@ int atomisp_subdev_register_entities(struct atomisp_sub_device *asd, return ret; } -#ifndef ISP2401 - -#endif /* * atomisp_subdev_init - ISP Subdevice initialization. * @dev: Device pointer specific to the ATOM ISP. diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c index 9d6d67c..800562d 100644 --- a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c @@ -906,9 +906,7 @@ static int atomisp_register_entities(struct atomisp_device *isp) strlcpy(isp->media_dev.model, "Intel Atom ISP", sizeof(isp->media_dev.model)); -#ifndef ISP2401 -#endif media_device_init(&isp->media_dev); isp->v4l2_dev.mdev = &isp->media_dev; ret = v4l2_device_register(isp->dev, &isp->v4l2_dev); @@ -1545,16 +1543,12 @@ static int atomisp_pci_probe(struct pci_dev *dev, atomisp_msi_irq_uninit(isp, dev); atomisp_ospm_dphy_down(isp); -#ifndef ISP2401 + /* Address later when we worry about the ...field chips */ -#endif if (ATOMISP_INTERNAL_PM) { if (atomisp_mrfld_power_down(isp)) dev_err(&dev->dev, "Failed to switch off ISP\n"); } -#ifdef ISP2401 - -#endif pci_dev_put(isp->pci_root); return err; }
The two drivers were originally merged by tools, and the tools didn't always spot white space only changes. Fix a few of them found by zero-day and clean up some more by hand. Signed-off-by: Alan Cox <alan@linux.intel.com> --- .../media/atomisp/pci/atomisp2/atomisp_cmd.c | 29 ------- .../media/atomisp/pci/atomisp2/atomisp_ioctl.c | 21 ----- .../media/atomisp/pci/atomisp2/atomisp_subdev.c | 81 -------------------- .../media/atomisp/pci/atomisp2/atomisp_v4l2.c | 8 -- 4 files changed, 6 insertions(+), 133 deletions(-)