| Message ID | 20170315105537.22349-14-quentin.schulz@free-electrons.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hi, On Wed, Mar 15, 2017 at 11:55:32AM +0100, Quentin Schulz wrote: > The X-Powers AXP20X and AXP22X PMICs can have a battery as power supply. > > This patch adds the battery power supply driver to get various data from > the PMIC, such as the battery status (charging, discharging, full, > dead), current max limit, current current, battery capacity (in > percentage), voltage max and min limits, current voltage and battery > capacity (in Ah). > > This battery driver uses the AXP20X/AXP22X ADC driver as PMIC data > provider. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > Acked-by: Jonathan Cameron <jic23@kernel.org> > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> > Acked-by: Chen-Yu Tsai <wens@csie.org> I think this should be named axp20x-battery-fuel-gauge or just axp20x-battery. For my own reference: Acked-by: Sebastian Reichel <sre@kernel.org> -- Sebastian > v4: > - removed useless axp20x_dev variable in struct axp20x_batt_ps, > - added struct device and maximum constant current charge variables in struct > axp20x_batt_ps, > - fixed wrong maximum constant current charge formula for AXP22X (forgot to add > a custom formula so it was calculated like the AXP209), > - when a battery node in DT does not have a valid constant current charge or > there is no battery, the maximum current constant current charge are set to the > lowest possible value, > - it is possible to set maximum constant current charge now but a warn message > is printed when trying to increase it to inform people it is risky, > - added a check to verify the constant current charge to be set is under the > maximum allowed, > - lower the current constant charge current if it is higher than the maximum > current value to be set, > > v3: > - added axp20x_set_voltage_min_design function so it can be reused, > - used power_supply_get_battery_info for setting constant charge current > instead of x-powers,constant-charge-current introduced in v2, > - used power_supply_get_battery_info for setting voltage min design of > the battery, > > v2: > - changed BIT(x) to 1 << x when describing bits purpose for which 2 << > x or 3 << x exists, to be consistent, > - switched from POWER_SUPPLY_PROP_CURRENT_MAX to > POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, > - added POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX to the list of > readable properties, > - replaced µ character by a common u for micro units to make checkpatch > happy, > - factorized code in axp20x_battery_set_max_voltage, > - added a axp20x_set_constant_charge_current function to be used when > setting the value from sysfs and from the DT, > - removed some dead code, > - added a DT property to set constant current charge of the battery > (x-powers,constant-charge-current), > - migrated to dev_get_regmap instead of manually looking for the regmap > in the drvdata of the parent, > - switched from int to uintptr_t cast to make sure the cast is always > > for the same size type (make build on 64bits platforms happy mainly), > drivers/power/supply/Kconfig | 12 + > drivers/power/supply/Makefile | 1 + > drivers/power/supply/axp20x_battery.c | 565 ++++++++++++++++++++++++++++++++++ > 3 files changed, 578 insertions(+) > create mode 100644 drivers/power/supply/axp20x_battery.c > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index da54ac8..8306e98 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -232,6 +232,18 @@ config CHARGER_AXP20X > This driver can also be built as a module. If so, the module will be > called axp20x_ac_power. > > +config BATTERY_AXP20X > + tristate "X-Powers AXP20X battery driver" > + depends on MFD_AXP20X > + depends on AXP20X_ADC > + depends on IIO > + help > + Say Y here to enable support for X-Powers AXP20X PMICs' battery power > + supply. > + > + This driver can also be built as a module. If so, the module will be > + called axp20x_battery. > + > config AXP288_CHARGER > tristate "X-Powers AXP288 Charger" > depends on MFD_AXP20X && EXTCON_AXP288 > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile > index 3789a2c..52dd17d 100644 > --- a/drivers/power/supply/Makefile > +++ b/drivers/power/supply/Makefile > @@ -18,6 +18,7 @@ obj-$(CONFIG_TEST_POWER) += test_power.o > > obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o > obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o > +obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o > obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o > obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o > obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o > diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > new file mode 100644 > index 0000000..dcc017a > --- /dev/null > +++ b/drivers/power/supply/axp20x_battery.c > @@ -0,0 +1,565 @@ > +/* > + * Battery power supply driver for X-Powers AXP20X and AXP22X PMICs > + * > + * Copyright 2016 Free Electrons NextThing Co. > + * Quentin Schulz <quentin.schulz@free-electrons.com> > + * > + * This driver is based on a previous upstreaming attempt by: > + * Bruno Prémont <bonbons@linux-vserver.org> > + * > + * This file is subject to the terms and conditions of the GNU General > + * Public License. See the file "COPYING" in the main directory of this > + * archive for more details. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/err.h> > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/power_supply.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > +#include <linux/time.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/consumer.h> > +#include <linux/mfd/axp20x.h> > + > +#define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2) > + > +#define AXP20X_PWR_OP_BATT_PRESENT BIT(5) > +#define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3) > + > +#define AXP209_FG_PERCENT GENMASK(6, 0) > +#define AXP22X_FG_VALID BIT(7) > + > +#define AXP20X_CHRG_CTRL1_TGT_VOLT GENMASK(6, 5) > +#define AXP20X_CHRG_CTRL1_TGT_4_1V (0 << 5) > +#define AXP20X_CHRG_CTRL1_TGT_4_15V (1 << 5) > +#define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5) > +#define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5) > + > +#define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) > +#define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) > + > +#define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0) > + > +#define AXP20X_V_OFF_MASK GENMASK(2, 0) > + > +struct axp20x_batt_ps { > + struct regmap *regmap; > + struct power_supply *batt; > + struct device *dev; > + struct iio_channel *batt_chrg_i; > + struct iio_channel *batt_dischrg_i; > + struct iio_channel *batt_v; > + /* Maximum constant charge current */ > + unsigned int max_ccc; > + u8 axp_id; > +}; > + > +static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int *val) > +{ > + int ret, reg; > + > + ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); > + if (ret) > + return ret; > + > + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { > + case AXP20X_CHRG_CTRL1_TGT_4_1V: > + *val = 4100000; > + break; > + case AXP20X_CHRG_CTRL1_TGT_4_15V: > + *val = 4150000; > + break; > + case AXP20X_CHRG_CTRL1_TGT_4_2V: > + *val = 4200000; > + break; > + case AXP20X_CHRG_CTRL1_TGT_4_36V: > + *val = 4360000; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int *val) > +{ > + int ret, reg; > + > + ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); > + if (ret) > + return ret; > + > + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { > + case AXP20X_CHRG_CTRL1_TGT_4_1V: > + *val = 4100000; > + break; > + case AXP20X_CHRG_CTRL1_TGT_4_2V: > + *val = 4200000; > + break; > + case AXP22X_CHRG_CTRL1_TGT_4_22V: > + *val = 4220000; > + break; > + case AXP22X_CHRG_CTRL1_TGT_4_24V: > + *val = 4240000; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, > + int *val) > +{ > + int ret; > + > + ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val); > + if (ret) > + return ret; > + > + *val &= AXP20X_CHRG_CTRL1_TGT_CURR; > + > + if (axp->axp_id == AXP209_ID) > + *val = *val * 100000 + 300000; > + else > + *val = *val * 150000 + 300000; > + > + return 0; > +} > + > +static int axp20x_battery_get_prop(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); > + struct iio_channel *chan; > + int ret = 0, reg, val1; > + > + switch (psp) { > + case POWER_SUPPLY_PROP_PRESENT: > + case POWER_SUPPLY_PROP_ONLINE: > + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, > + ®); > + if (ret) > + return ret; > + > + val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT); > + break; > + > + case POWER_SUPPLY_PROP_STATUS: > + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS, > + ®); > + if (ret) > + return ret; > + > + if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) { > + val->intval = POWER_SUPPLY_STATUS_CHARGING; > + return 0; > + } > + > + ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, > + &val1); > + if (ret) > + return ret; > + > + if (val1) { > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; > + return 0; > + } > + > + ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1); > + if (ret) > + return ret; > + > + /* > + * Fuel Gauge data takes 7 bits but the stored value seems to be > + * directly the raw percentage without any scaling to 7 bits. > + */ > + if ((val1 & AXP209_FG_PERCENT) == 100) > + val->intval = POWER_SUPPLY_STATUS_FULL; > + else > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; > + break; > + > + case POWER_SUPPLY_PROP_HEALTH: > + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, > + &val1); > + if (ret) > + return ret; > + > + if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) { > + val->intval = POWER_SUPPLY_HEALTH_DEAD; > + return 0; > + } > + > + val->intval = POWER_SUPPLY_HEALTH_GOOD; > + break; > + > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: > + ret = axp20x_get_constant_charge_current(axp20x_batt, > + &val->intval); > + if (ret) > + return ret; > + break; > + > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: > + val->intval = axp20x_batt->max_ccc; > + break; > + > + case POWER_SUPPLY_PROP_CURRENT_NOW: > + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS, > + ®); > + if (ret) > + return ret; > + > + if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) > + chan = axp20x_batt->batt_chrg_i; > + else > + chan = axp20x_batt->batt_dischrg_i; > + > + ret = iio_read_channel_processed(chan, &val->intval); > + if (ret) > + return ret; > + > + /* IIO framework gives mA but Power Supply framework gives uA */ > + val->intval *= 1000; > + break; > + > + case POWER_SUPPLY_PROP_CAPACITY: > + /* When no battery is present, return capacity is 100% */ > + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, > + ®); > + if (ret) > + return ret; > + > + if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) { > + val->intval = 100; > + return 0; > + } > + > + ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, ®); > + if (ret) > + return ret; > + > + if (axp20x_batt->axp_id == AXP221_ID && > + !(reg & AXP22X_FG_VALID)) > + return -EINVAL; > + > + /* > + * Fuel Gauge data takes 7 bits but the stored value seems to be > + * directly the raw percentage without any scaling to 7 bits. > + */ > + val->intval = reg & AXP209_FG_PERCENT; > + break; > + > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > + if (axp20x_batt->axp_id == AXP209_ID) > + return axp20x_battery_get_max_voltage(axp20x_batt, > + &val->intval); > + return axp22x_battery_get_max_voltage(axp20x_batt, > + &val->intval); > + > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > + ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, ®); > + if (ret) > + return ret; > + > + val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK); > + break; > + > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > + ret = iio_read_channel_processed(axp20x_batt->batt_v, > + &val->intval); > + if (ret) > + return ret; > + > + /* IIO framework gives mV but Power Supply framework gives uV */ > + val->intval *= 1000; > + break; > + > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int val) > +{ > + switch (val) { > + case 4100000: > + val = AXP20X_CHRG_CTRL1_TGT_4_1V; > + break; > + > + case 4150000: > + if (axp20x_batt->axp_id == AXP221_ID) > + return -EINVAL; > + > + val = AXP20X_CHRG_CTRL1_TGT_4_15V; > + break; > + > + case 4200000: > + val = AXP20X_CHRG_CTRL1_TGT_4_2V; > + break; > + > + default: > + /* > + * AXP20x max voltage can be set to 4.36V and AXP22X max voltage > + * can be set to 4.22V and 4.24V, but these voltages are too > + * high for Lithium based batteries (AXP PMICs are supposed to > + * be used with these kinds of battery). > + */ > + return -EINVAL; > + } > + > + return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, > + AXP20X_CHRG_CTRL1_TGT_VOLT, val); > +} > + > +static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > + int charge_current) > +{ > + if (charge_current > axp_batt->max_ccc) > + return -EINVAL; > + > + if (axp_batt->axp_id == AXP209_ID) > + charge_current = (charge_current - 300000) / 100000; > + else > + charge_current = (charge_current - 300000) / 150000; > + > + if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) > + return -EINVAL; > + > + return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1, > + AXP20X_CHRG_CTRL1_TGT_CURR, charge_current); > +} > + > +static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, > + int charge_current) > +{ > + bool lower_max = false; > + > + if (axp->axp_id == AXP209_ID) > + charge_current = (charge_current - 300000) / 100000; > + else > + charge_current = (charge_current - 300000) / 150000; > + > + if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) > + return -EINVAL; > + > + if (axp->axp_id == AXP209_ID) > + charge_current = charge_current * 100000 + 300000; > + else > + charge_current = charge_current * 150000 + 300000; > + > + if (charge_current > axp->max_ccc) > + dev_warn(axp->dev, > + "Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n"); > + else > + lower_max = true; > + > + axp->max_ccc = charge_current; > + > + if (lower_max) { > + int current_cc; > + > + axp20x_get_constant_charge_current(axp, ¤t_cc); > + if (current_cc > charge_current) > + axp20x_set_constant_charge_current(axp, charge_current); > + } > + > + return 0; > +} > +static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, > + int min_voltage) > +{ > + int val1 = (min_voltage - 2600000) / 100000; > + > + if (val1 < 0 || val1 > AXP20X_V_OFF_MASK) > + return -EINVAL; > + > + return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF, > + AXP20X_V_OFF_MASK, val1); > +} > + > +static int axp20x_battery_set_prop(struct power_supply *psy, > + enum power_supply_property psp, > + const union power_supply_propval *val) > +{ > + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); > + > + switch (psp) { > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > + return axp20x_set_voltage_min_design(axp20x_batt, val->intval); > + > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > + return axp20x_battery_set_max_voltage(axp20x_batt, val->intval); > + > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: > + return axp20x_set_constant_charge_current(axp20x_batt, > + val->intval); > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: > + return axp20x_set_max_constant_charge_current(axp20x_batt, > + val->intval); > + > + default: > + return -EINVAL; > + } > +} > + > +static enum power_supply_property axp20x_battery_props[] = { > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_ONLINE, > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, > + POWER_SUPPLY_PROP_HEALTH, > + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, > + POWER_SUPPLY_PROP_CAPACITY, > +}; > + > +static int axp20x_battery_prop_writeable(struct power_supply *psy, > + enum power_supply_property psp) > +{ > + return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN || > + psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN || > + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT || > + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; > +} > + > +static const struct power_supply_desc axp20x_batt_ps_desc = { > + .name = "axp20x-battery", > + .type = POWER_SUPPLY_TYPE_BATTERY, > + .properties = axp20x_battery_props, > + .num_properties = ARRAY_SIZE(axp20x_battery_props), > + .property_is_writeable = axp20x_battery_prop_writeable, > + .get_property = axp20x_battery_get_prop, > + .set_property = axp20x_battery_set_prop, > +}; > + > +static const struct of_device_id axp20x_battery_ps_id[] = { > + { > + .compatible = "x-powers,axp209-battery-power-supply", > + .data = (void *)AXP209_ID, > + }, { > + .compatible = "x-powers,axp221-battery-power-supply", > + .data = (void *)AXP221_ID, > + }, { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id); > + > +static int axp20x_power_probe(struct platform_device *pdev) > +{ > + struct axp20x_batt_ps *axp20x_batt; > + struct power_supply_config psy_cfg = {}; > + struct power_supply_battery_info info; > + > + if (!of_device_is_available(pdev->dev.of_node)) > + return -ENODEV; > + > + axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt), > + GFP_KERNEL); > + if (!axp20x_batt) > + return -ENOMEM; > + > + axp20x_batt->dev = &pdev->dev; > + > + axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > + if (IS_ERR(axp20x_batt->batt_v)) { > + if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp20x_batt->batt_v); > + } > + > + axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > + "batt_chrg_i"); > + if (IS_ERR(axp20x_batt->batt_chrg_i)) { > + if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp20x_batt->batt_chrg_i); > + } > + > + axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, > + "batt_dischrg_i"); > + if (IS_ERR(axp20x_batt->batt_dischrg_i)) { > + if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp20x_batt->batt_dischrg_i); > + } > + > + axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL); > + platform_set_drvdata(pdev, axp20x_batt); > + > + psy_cfg.drv_data = axp20x_batt; > + psy_cfg.of_node = pdev->dev.of_node; > + > + axp20x_batt->axp_id = (uintptr_t)of_device_get_match_data(&pdev->dev); > + > + axp20x_batt->batt = devm_power_supply_register(&pdev->dev, > + &axp20x_batt_ps_desc, > + &psy_cfg); > + if (IS_ERR(axp20x_batt->batt)) { > + dev_err(&pdev->dev, "failed to register power supply: %ld\n", > + PTR_ERR(axp20x_batt->batt)); > + return PTR_ERR(axp20x_batt->batt); > + } > + > + if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) { > + int vmin = info.voltage_min_design_uv; > + int ccc = info.constant_charge_ua; > + > + if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt, > + vmin)) > + dev_err(&pdev->dev, > + "couldn't set voltage_min_design\n"); > + > + /* Set max to unverified value to be able to set CCC */ > + axp20x_batt->max_ccc = ccc; > + > + if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt, > + ccc)) { > + dev_err(&pdev->dev, > + "couldn't set constant charge current from DT: fallback to minimum value\n"); > + ccc = 300000; > + axp20x_batt->max_ccc = ccc; > + axp20x_set_constant_charge_current(axp20x_batt, ccc); > + } > + } > + > + /* > + * Update max CCC to a valid value if battery info is present or set it > + * to current register value by default. > + */ > + axp20x_get_constant_charge_current(axp20x_batt, > + &axp20x_batt->max_ccc); > + > + return 0; > +} > + > +static struct platform_driver axp20x_batt_driver = { > + .probe = axp20x_power_probe, > + .driver = { > + .name = "axp20x-battery-power-supply", > + .of_match_table = axp20x_battery_ps_id, > + }, > +}; > + > +module_platform_driver(axp20x_batt_driver); > + > +MODULE_DESCRIPTION("Battery power supply driver for AXP20X and AXP22X PMICs"); > +MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>"); > +MODULE_LICENSE("GPL"); > -- > 2.9.3 >
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index da54ac8..8306e98 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -232,6 +232,18 @@ config CHARGER_AXP20X This driver can also be built as a module. If so, the module will be called axp20x_ac_power. +config BATTERY_AXP20X + tristate "X-Powers AXP20X battery driver" + depends on MFD_AXP20X + depends on AXP20X_ADC + depends on IIO + help + Say Y here to enable support for X-Powers AXP20X PMICs' battery power + supply. + + This driver can also be built as a module. If so, the module will be + called axp20x_battery. + config AXP288_CHARGER tristate "X-Powers AXP288 Charger" depends on MFD_AXP20X && EXTCON_AXP288 diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 3789a2c..52dd17d 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_TEST_POWER) += test_power.o obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o +obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c new file mode 100644 index 0000000..dcc017a --- /dev/null +++ b/drivers/power/supply/axp20x_battery.c @@ -0,0 +1,565 @@ +/* + * Battery power supply driver for X-Powers AXP20X and AXP22X PMICs + * + * Copyright 2016 Free Electrons NextThing Co. + * Quentin Schulz <quentin.schulz@free-electrons.com> + * + * This driver is based on a previous upstreaming attempt by: + * Bruno Prémont <bonbons@linux-vserver.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/iio/iio.h> +#include <linux/iio/consumer.h> +#include <linux/mfd/axp20x.h> + +#define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2) + +#define AXP20X_PWR_OP_BATT_PRESENT BIT(5) +#define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3) + +#define AXP209_FG_PERCENT GENMASK(6, 0) +#define AXP22X_FG_VALID BIT(7) + +#define AXP20X_CHRG_CTRL1_TGT_VOLT GENMASK(6, 5) +#define AXP20X_CHRG_CTRL1_TGT_4_1V (0 << 5) +#define AXP20X_CHRG_CTRL1_TGT_4_15V (1 << 5) +#define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5) +#define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5) + +#define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) +#define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) + +#define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0) + +#define AXP20X_V_OFF_MASK GENMASK(2, 0) + +struct axp20x_batt_ps { + struct regmap *regmap; + struct power_supply *batt; + struct device *dev; + struct iio_channel *batt_chrg_i; + struct iio_channel *batt_dischrg_i; + struct iio_channel *batt_v; + /* Maximum constant charge current */ + unsigned int max_ccc; + u8 axp_id; +}; + +static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, + int *val) +{ + int ret, reg; + + ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); + if (ret) + return ret; + + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { + case AXP20X_CHRG_CTRL1_TGT_4_1V: + *val = 4100000; + break; + case AXP20X_CHRG_CTRL1_TGT_4_15V: + *val = 4150000; + break; + case AXP20X_CHRG_CTRL1_TGT_4_2V: + *val = 4200000; + break; + case AXP20X_CHRG_CTRL1_TGT_4_36V: + *val = 4360000; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, + int *val) +{ + int ret, reg; + + ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®); + if (ret) + return ret; + + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) { + case AXP20X_CHRG_CTRL1_TGT_4_1V: + *val = 4100000; + break; + case AXP20X_CHRG_CTRL1_TGT_4_2V: + *val = 4200000; + break; + case AXP22X_CHRG_CTRL1_TGT_4_22V: + *val = 4220000; + break; + case AXP22X_CHRG_CTRL1_TGT_4_24V: + *val = 4240000; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, + int *val) +{ + int ret; + + ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val); + if (ret) + return ret; + + *val &= AXP20X_CHRG_CTRL1_TGT_CURR; + + if (axp->axp_id == AXP209_ID) + *val = *val * 100000 + 300000; + else + *val = *val * 150000 + 300000; + + return 0; +} + +static int axp20x_battery_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); + struct iio_channel *chan; + int ret = 0, reg, val1; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + case POWER_SUPPLY_PROP_ONLINE: + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, + ®); + if (ret) + return ret; + + val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT); + break; + + case POWER_SUPPLY_PROP_STATUS: + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS, + ®); + if (ret) + return ret; + + if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) { + val->intval = POWER_SUPPLY_STATUS_CHARGING; + return 0; + } + + ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, + &val1); + if (ret) + return ret; + + if (val1) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + return 0; + } + + ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1); + if (ret) + return ret; + + /* + * Fuel Gauge data takes 7 bits but the stored value seems to be + * directly the raw percentage without any scaling to 7 bits. + */ + if ((val1 & AXP209_FG_PERCENT) == 100) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + case POWER_SUPPLY_PROP_HEALTH: + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, + &val1); + if (ret) + return ret; + + if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) { + val->intval = POWER_SUPPLY_HEALTH_DEAD; + return 0; + } + + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = axp20x_get_constant_charge_current(axp20x_batt, + &val->intval); + if (ret) + return ret; + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + val->intval = axp20x_batt->max_ccc; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS, + ®); + if (ret) + return ret; + + if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) + chan = axp20x_batt->batt_chrg_i; + else + chan = axp20x_batt->batt_dischrg_i; + + ret = iio_read_channel_processed(chan, &val->intval); + if (ret) + return ret; + + /* IIO framework gives mA but Power Supply framework gives uA */ + val->intval *= 1000; + break; + + case POWER_SUPPLY_PROP_CAPACITY: + /* When no battery is present, return capacity is 100% */ + ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE, + ®); + if (ret) + return ret; + + if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) { + val->intval = 100; + return 0; + } + + ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, ®); + if (ret) + return ret; + + if (axp20x_batt->axp_id == AXP221_ID && + !(reg & AXP22X_FG_VALID)) + return -EINVAL; + + /* + * Fuel Gauge data takes 7 bits but the stored value seems to be + * directly the raw percentage without any scaling to 7 bits. + */ + val->intval = reg & AXP209_FG_PERCENT; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + if (axp20x_batt->axp_id == AXP209_ID) + return axp20x_battery_get_max_voltage(axp20x_batt, + &val->intval); + return axp22x_battery_get_max_voltage(axp20x_batt, + &val->intval); + + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, ®); + if (ret) + return ret; + + val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK); + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = iio_read_channel_processed(axp20x_batt->batt_v, + &val->intval); + if (ret) + return ret; + + /* IIO framework gives mV but Power Supply framework gives uV */ + val->intval *= 1000; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, + int val) +{ + switch (val) { + case 4100000: + val = AXP20X_CHRG_CTRL1_TGT_4_1V; + break; + + case 4150000: + if (axp20x_batt->axp_id == AXP221_ID) + return -EINVAL; + + val = AXP20X_CHRG_CTRL1_TGT_4_15V; + break; + + case 4200000: + val = AXP20X_CHRG_CTRL1_TGT_4_2V; + break; + + default: + /* + * AXP20x max voltage can be set to 4.36V and AXP22X max voltage + * can be set to 4.22V and 4.24V, but these voltages are too + * high for Lithium based batteries (AXP PMICs are supposed to + * be used with these kinds of battery). + */ + return -EINVAL; + } + + return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, + AXP20X_CHRG_CTRL1_TGT_VOLT, val); +} + +static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, + int charge_current) +{ + if (charge_current > axp_batt->max_ccc) + return -EINVAL; + + if (axp_batt->axp_id == AXP209_ID) + charge_current = (charge_current - 300000) / 100000; + else + charge_current = (charge_current - 300000) / 150000; + + if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) + return -EINVAL; + + return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1, + AXP20X_CHRG_CTRL1_TGT_CURR, charge_current); +} + +static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, + int charge_current) +{ + bool lower_max = false; + + if (axp->axp_id == AXP209_ID) + charge_current = (charge_current - 300000) / 100000; + else + charge_current = (charge_current - 300000) / 150000; + + if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0) + return -EINVAL; + + if (axp->axp_id == AXP209_ID) + charge_current = charge_current * 100000 + 300000; + else + charge_current = charge_current * 150000 + 300000; + + if (charge_current > axp->max_ccc) + dev_warn(axp->dev, + "Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n"); + else + lower_max = true; + + axp->max_ccc = charge_current; + + if (lower_max) { + int current_cc; + + axp20x_get_constant_charge_current(axp, ¤t_cc); + if (current_cc > charge_current) + axp20x_set_constant_charge_current(axp, charge_current); + } + + return 0; +} +static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, + int min_voltage) +{ + int val1 = (min_voltage - 2600000) / 100000; + + if (val1 < 0 || val1 > AXP20X_V_OFF_MASK) + return -EINVAL; + + return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF, + AXP20X_V_OFF_MASK, val1); +} + +static int axp20x_battery_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + return axp20x_set_voltage_min_design(axp20x_batt, val->intval); + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + return axp20x_battery_set_max_voltage(axp20x_batt, val->intval); + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + return axp20x_set_constant_charge_current(axp20x_batt, + val->intval); + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + return axp20x_set_max_constant_charge_current(axp20x_batt, + val->intval); + + default: + return -EINVAL; + } +} + +static enum power_supply_property axp20x_battery_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_CAPACITY, +}; + +static int axp20x_battery_prop_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN || + psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN || + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT || + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; +} + +static const struct power_supply_desc axp20x_batt_ps_desc = { + .name = "axp20x-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = axp20x_battery_props, + .num_properties = ARRAY_SIZE(axp20x_battery_props), + .property_is_writeable = axp20x_battery_prop_writeable, + .get_property = axp20x_battery_get_prop, + .set_property = axp20x_battery_set_prop, +}; + +static const struct of_device_id axp20x_battery_ps_id[] = { + { + .compatible = "x-powers,axp209-battery-power-supply", + .data = (void *)AXP209_ID, + }, { + .compatible = "x-powers,axp221-battery-power-supply", + .data = (void *)AXP221_ID, + }, { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id); + +static int axp20x_power_probe(struct platform_device *pdev) +{ + struct axp20x_batt_ps *axp20x_batt; + struct power_supply_config psy_cfg = {}; + struct power_supply_battery_info info; + + if (!of_device_is_available(pdev->dev.of_node)) + return -ENODEV; + + axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt), + GFP_KERNEL); + if (!axp20x_batt) + return -ENOMEM; + + axp20x_batt->dev = &pdev->dev; + + axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); + if (IS_ERR(axp20x_batt->batt_v)) { + if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(axp20x_batt->batt_v); + } + + axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, + "batt_chrg_i"); + if (IS_ERR(axp20x_batt->batt_chrg_i)) { + if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(axp20x_batt->batt_chrg_i); + } + + axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, + "batt_dischrg_i"); + if (IS_ERR(axp20x_batt->batt_dischrg_i)) { + if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(axp20x_batt->batt_dischrg_i); + } + + axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL); + platform_set_drvdata(pdev, axp20x_batt); + + psy_cfg.drv_data = axp20x_batt; + psy_cfg.of_node = pdev->dev.of_node; + + axp20x_batt->axp_id = (uintptr_t)of_device_get_match_data(&pdev->dev); + + axp20x_batt->batt = devm_power_supply_register(&pdev->dev, + &axp20x_batt_ps_desc, + &psy_cfg); + if (IS_ERR(axp20x_batt->batt)) { + dev_err(&pdev->dev, "failed to register power supply: %ld\n", + PTR_ERR(axp20x_batt->batt)); + return PTR_ERR(axp20x_batt->batt); + } + + if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) { + int vmin = info.voltage_min_design_uv; + int ccc = info.constant_charge_ua; + + if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt, + vmin)) + dev_err(&pdev->dev, + "couldn't set voltage_min_design\n"); + + /* Set max to unverified value to be able to set CCC */ + axp20x_batt->max_ccc = ccc; + + if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt, + ccc)) { + dev_err(&pdev->dev, + "couldn't set constant charge current from DT: fallback to minimum value\n"); + ccc = 300000; + axp20x_batt->max_ccc = ccc; + axp20x_set_constant_charge_current(axp20x_batt, ccc); + } + } + + /* + * Update max CCC to a valid value if battery info is present or set it + * to current register value by default. + */ + axp20x_get_constant_charge_current(axp20x_batt, + &axp20x_batt->max_ccc); + + return 0; +} + +static struct platform_driver axp20x_batt_driver = { + .probe = axp20x_power_probe, + .driver = { + .name = "axp20x-battery-power-supply", + .of_match_table = axp20x_battery_ps_id, + }, +}; +