| Message ID | 20170321153611.16228-3-quentin.schulz@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Mar 21, 2017 at 11:36 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > This adds almost all operating points allowed for the A33 as defined by > fex files available at: > https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33 > > There are more possible frequencies in this patch than there are in the > fex files because the fex files only give an interval of possible > frequencies for a given voltage. All supported frequencies are defined > in the original driver code in Allwinner vendor tree. > > There are two missing frequencies though: 1104MHz and 1200MHz which > require the CPU to have 1.32V supplied, which is higher than the default > voltage. > > Without all A33 boards defining the CPU regulator, we cannot have these > two frequencies as it would cause the CPU to try to run a higher > frequency without "overvolting" which is very likely to crash the CPU. > > Therefore, these two frequencies must be enabled on a per-board basis. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 22, 2017 at 11:31:54AM +0800, Chen-Yu Tsai wrote: > On Tue, Mar 21, 2017 at 11:36 PM, Quentin Schulz > <quentin.schulz@free-electrons.com> wrote: > > This adds almost all operating points allowed for the A33 as defined by > > fex files available at: > > https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33 > > > > There are more possible frequencies in this patch than there are in the > > fex files because the fex files only give an interval of possible > > frequencies for a given voltage. All supported frequencies are defined > > in the original driver code in Allwinner vendor tree. > > > > There are two missing frequencies though: 1104MHz and 1200MHz which > > require the CPU to have 1.32V supplied, which is higher than the default > > voltage. > > > > Without all A33 boards defining the CPU regulator, we cannot have these > > two frequencies as it would cause the CPU to try to run a higher > > frequency without "overvolting" which is very likely to crash the CPU. > > > > Therefore, these two frequencies must be enabled on a per-board basis. > > > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > > Acked-by: Chen-Yu Tsai <wens@csie.org> Applied, thanks! Maxime
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 39b2d78..b1cdff66 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -49,18 +49,72 @@ compatible = "operating-points-v2"; opp-shared; + opp@120000000 { + opp-hz = /bits/ 64 <120000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@240000000 { + opp-hz = /bits/ 64 <240000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp@648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; + opp@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp@816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; + opp@912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp@1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000>;
This adds almost all operating points allowed for the A33 as defined by fex files available at: https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33 There are more possible frequencies in this patch than there are in the fex files because the fex files only give an interval of possible frequencies for a given voltage. All supported frequencies are defined in the original driver code in Allwinner vendor tree. There are two missing frequencies though: 1104MHz and 1200MHz which require the CPU to have 1.32V supplied, which is higher than the default voltage. Without all A33 boards defining the CPU regulator, we cannot have these two frequencies as it would cause the CPU to try to run a higher frequency without "overvolting" which is very likely to crash the CPU. Therefore, these two frequencies must be enabled on a per-board basis. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> --- v2: - updated commit log, - removed 1.1GHz as it requires overvolting the CPU which need the CPU regulator to be set which is set on a per-board basis, arch/arm/boot/dts/sun8i-a33.dtsi | 54 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)