| Message ID | 20170315170328.13879-1-zajec5@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/15/2017 10:03 AM, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > So far every Northstar device we have seen was using the same serial > console params (115200n8). It probably make the most sense to put it in > some proper dtsi files instead of repeating over and over for every > single device. As different boards may use different bootloaders it > seems the safest idea is to use board specific dtsi files. > > Just in case some vendor decides to use different UART (parameters) this > can be always easily overwritten. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Applied, thanks!
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi index d0eec099f1f8..1a19e97a987d 100644 --- a/arch/arm/boot/dts/bcm4708.dtsi +++ b/arch/arm/boot/dts/bcm4708.dtsi @@ -12,6 +12,14 @@ / { compatible = "brcm,bcm4708"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi index 7bcd536198fc..9829d044aaf4 100644 --- a/arch/arm/boot/dts/bcm47081.dtsi +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -22,6 +22,14 @@ / { compatible = "brcm,bcm47081"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 8fd1ef9f0c2d..65dc67e86ae1 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -18,10 +18,6 @@ / { interrupt-parent = <&gic>; - chosen { - stdout-path = &uart0; - }; - chipcommonA { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 42855a7c1bfa..2e08c895f281 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -38,14 +38,6 @@ model = "NorthStar SVK (BCM94708)"; compatible = "brcm,bcm94708", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index 95e8be65f2f1..c37616c67edc 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -38,14 +38,6 @@ model = "NorthStar SVK (BCM94709)"; compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index decd86bae901..40e694bfe5ca 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -39,14 +39,6 @@ model = "NorthStar Enterprise Router (BCM953012ER)"; compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts index 85f9b0b872ac..5be4225324a3 100644 --- a/arch/arm/boot/dts/bcm953012hr.dts +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -39,14 +39,6 @@ model = "NorthStar HR (BCM953012HR)"; compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@80000000 { reg = <0x80000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index a00c4e1dfb4c..fbc6219e977a 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -43,10 +43,6 @@ serial1 = &uart1; }; - chosen { - stdout-path = "serial0:115200n8"; - }; - memory { reg = <0x00000000 0x10000000>; };