diff mbox

[v2,5/9] drm/rockchip: vop: Enable pm domain when resetting vop

Message ID 1491046529-4310-6-git-send-email-jeffy.chen@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jeffy Chen April 1, 2017, 11:35 a.m. UTC
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---

Changes in v2: None

 drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 31 +++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)

Comments

Sean Paul April 4, 2017, 7:42 p.m. UTC | #1
On Sat, Apr 01, 2017 at 07:35:25PM +0800, Jeffy Chen wrote:

Hi Jeffy,
Could you please add commit messages describing *why* you're making the change?
It might be obvious to you (and maybe me), but others will benefit from better
descriptions.

> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
> ---
> 
> Changes in v2: None
> 
>  drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 31 +++++++++++++++++++----------
>  1 file changed, 21 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 76c79ac..1d85319 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -1365,6 +1365,12 @@ static int vop_initial(struct vop *vop)
>  		return ret;
>  	}
>  
> +	ret = pm_runtime_get_sync(vop->dev);
> +	if (ret < 0) {
> +		dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
> +		goto err_put_pm_runtime;

This should go to err_unprepare_dclk, the next error condition should go to
err_put_pm_runtime

> +	}
> +
>  	/* Enable both the hclk and aclk to setup the vop */
>  	ret = clk_prepare_enable(vop->hclk);
>  	if (ret < 0) {
> @@ -1422,6 +1428,8 @@ static int vop_initial(struct vop *vop)
>  
>  	vop->is_enabled = false;
>  
> +	pm_runtime_put_sync(vop->dev);
> +
>  	return 0;
>  
>  err_disable_aclk:
> @@ -1430,6 +1438,8 @@ static int vop_initial(struct vop *vop)
>  	clk_disable_unprepare(vop->hclk);
>  err_unprepare_dclk:
>  	clk_unprepare(vop->dclk);
> +err_put_pm_runtime:
> +	pm_runtime_put_sync(vop->dev);

Should be above err_unprepare_dclk

>  	return ret;
>  }
>  
> @@ -1530,12 +1540,6 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
>  	if (!vop->regsbak)
>  		return -ENOMEM;
>  
> -	ret = vop_initial(vop);
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
> -		return ret;
> -	}
> -
>  	irq = platform_get_irq(pdev, 0);
>  	if (irq < 0) {
>  		dev_err(dev, "cannot find irq for vop\n");
> @@ -1556,15 +1560,22 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
>  	/* IRQ is initially disabled; it gets enabled in power_on */
>  	disable_irq(vop->irq);
>  
> +	pm_runtime_enable(&pdev->dev);
> +
> +	ret = vop_initial(vop);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
> +		goto err_disable_pm_runtime;
> +	}

This function move would be a lot easier to understand with a commit message ;-)

> +
>  	ret = vop_create_crtc(vop);
>  	if (ret)
> -		goto err_enable_irq;
> -
> -	pm_runtime_enable(&pdev->dev);
> +		goto err_disable_pm_runtime;

Do you have anything to clean up from vop_initial()?

>  
>  	return 0;
>  
> -err_enable_irq:
> +err_disable_pm_runtime:
> +	pm_runtime_disable(&pdev->dev);
>  	enable_irq(vop->irq); /* To balance out the disable_irq above */
>  	return ret;
>  }
> -- 
> 2.1.4
>
Jeffy Chen April 5, 2017, 10:23 a.m. UTC | #2
Hi Sean,

On 04/05/2017 03:42 AM, Sean Paul wrote:
> On Sat, Apr 01, 2017 at 07:35:25PM +0800, Jeffy Chen wrote:
>
> Hi Jeffy,
> Could you please add commit messages describing *why* you're making the change?
> It might be obvious to you (and maybe me), but others will benefit from better
> descriptions.
ok, will do.
>
>> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
>> ---
>>
>> Changes in v2: None
>>
>>   drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 31 +++++++++++++++++++----------
>>   1 file changed, 21 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>> index 76c79ac..1d85319 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>> @@ -1365,6 +1365,12 @@ static int vop_initial(struct vop *vop)
>>   		return ret;
>>   	}
>>
>> +	ret = pm_runtime_get_sync(vop->dev);
>> +	if (ret < 0) {
>> +		dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
>> +		goto err_put_pm_runtime;
>
> This should go to err_unprepare_dclk, the next error condition should go to
> err_put_pm_runtime
hmm, that's true, i copied it from vop_enable without a double 
check...will fix that too.
>
>> +	}
>> +
>>   	/* Enable both the hclk and aclk to setup the vop */
>>   	ret = clk_prepare_enable(vop->hclk);
>>   	if (ret < 0) {
>> @@ -1422,6 +1428,8 @@ static int vop_initial(struct vop *vop)
>>
>>   	vop->is_enabled = false;
>>
>> +	pm_runtime_put_sync(vop->dev);
>> +
>>   	return 0;
>>
>>   err_disable_aclk:
>> @@ -1430,6 +1438,8 @@ static int vop_initial(struct vop *vop)
>>   	clk_disable_unprepare(vop->hclk);
>>   err_unprepare_dclk:
>>   	clk_unprepare(vop->dclk);
>> +err_put_pm_runtime:
>> +	pm_runtime_put_sync(vop->dev);
>
> Should be above err_unprepare_dclk
>
oh, too careless, thanx for pointing that out.
>>   	return ret;
>>   }
>>
>> @@ -1530,12 +1540,6 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
>>   	if (!vop->regsbak)
>>   		return -ENOMEM;
>>
>> -	ret = vop_initial(vop);
>> -	if (ret < 0) {
>> -		dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
>> -		return ret;
>> -	}
>> -
>>   	irq = platform_get_irq(pdev, 0);
>>   	if (irq < 0) {
>>   		dev_err(dev, "cannot find irq for vop\n");
>> @@ -1556,15 +1560,22 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
>>   	/* IRQ is initially disabled; it gets enabled in power_on */
>>   	disable_irq(vop->irq);
>>
>> +	pm_runtime_enable(&pdev->dev);
>> +
>> +	ret = vop_initial(vop);
>> +	if (ret < 0) {
>> +		dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
>> +		goto err_disable_pm_runtime;
>> +	}
>
> This function move would be a lot easier to understand with a commit message ;-)
>
ok
>> +
>>   	ret = vop_create_crtc(vop);
>>   	if (ret)
>> -		goto err_enable_irq;
>> -
>> -	pm_runtime_enable(&pdev->dev);
>> +		goto err_disable_pm_runtime;
>
> Do you have anything to clean up from vop_initial()?
>
i'll put it to the end of bind ;)
>>
>>   	return 0;
>>
>> -err_enable_irq:
>> +err_disable_pm_runtime:
>> +	pm_runtime_disable(&pdev->dev);
>>   	enable_irq(vop->irq); /* To balance out the disable_irq above */
>>   	return ret;
>>   }
>> --
>> 2.1.4
>>
>
diff mbox

Patch

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 76c79ac..1d85319 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1365,6 +1365,12 @@  static int vop_initial(struct vop *vop)
 		return ret;
 	}
 
+	ret = pm_runtime_get_sync(vop->dev);
+	if (ret < 0) {
+		dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
+		goto err_put_pm_runtime;
+	}
+
 	/* Enable both the hclk and aclk to setup the vop */
 	ret = clk_prepare_enable(vop->hclk);
 	if (ret < 0) {
@@ -1422,6 +1428,8 @@  static int vop_initial(struct vop *vop)
 
 	vop->is_enabled = false;
 
+	pm_runtime_put_sync(vop->dev);
+
 	return 0;
 
 err_disable_aclk:
@@ -1430,6 +1438,8 @@  static int vop_initial(struct vop *vop)
 	clk_disable_unprepare(vop->hclk);
 err_unprepare_dclk:
 	clk_unprepare(vop->dclk);
+err_put_pm_runtime:
+	pm_runtime_put_sync(vop->dev);
 	return ret;
 }
 
@@ -1530,12 +1540,6 @@  static int vop_bind(struct device *dev, struct device *master, void *data)
 	if (!vop->regsbak)
 		return -ENOMEM;
 
-	ret = vop_initial(vop);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
-		return ret;
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(dev, "cannot find irq for vop\n");
@@ -1556,15 +1560,22 @@  static int vop_bind(struct device *dev, struct device *master, void *data)
 	/* IRQ is initially disabled; it gets enabled in power_on */
 	disable_irq(vop->irq);
 
+	pm_runtime_enable(&pdev->dev);
+
+	ret = vop_initial(vop);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
+		goto err_disable_pm_runtime;
+	}
+
 	ret = vop_create_crtc(vop);
 	if (ret)
-		goto err_enable_irq;
-
-	pm_runtime_enable(&pdev->dev);
+		goto err_disable_pm_runtime;
 
 	return 0;
 
-err_enable_irq:
+err_disable_pm_runtime:
+	pm_runtime_disable(&pdev->dev);
 	enable_irq(vop->irq); /* To balance out the disable_irq above */
 	return ret;
 }