| Message ID | 1490694293-18358-6-git-send-email-yannick.fertre@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Mar 28, 2017 at 11:44:48AM +0200, Yannick Fertre wrote: > This patch adds documentation of device tree bindings for the WVGA panel > Ampire AM-480272H3TMQW-T01H. > > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Yannick Fertre <yannick.fertre@st.com> > --- > .../display/panel/ampire,am-480272h3tmqw-t01h.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt Applied, thanks. Thierry
diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt new file mode 100644 index 0000000..6812280 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt @@ -0,0 +1,26 @@ +Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Required properties: +- compatible: should be "ampire,am-480272h3tmqw-t01h" + +Optional properties: +- power-supply: regulator to provide the supply voltage +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel + +Optional nodes: +- Video port for RGB input. + +Example: + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + enable-gpios = <&gpioa 8 1>; + port { + panel_in_rgb: endpoint { + remote-endpoint = <&controller_out_rgb>; + }; + }; + };