diff mbox

[3/3] clk: zte: add pll_vga clock for zx296718

Message ID 1490085503-15713-4-git-send-email-shawnguo@kernel.org (mailing list archive)
State Accepted
Delegated to: Stephen Boyd
Headers show

Commit Message

Shawn Guo March 21, 2017, 8:38 a.m. UTC 
From: Shawn Guo <shawn.guo@linaro.org>

It adds zx296718 pll_vga clock for VGA support, so that VGA device can
get required pixel rate from clock driver for different display mode.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/zte/clk-zx296718.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Jun Nie March 23, 2017, 1:36 a.m. UTC | #1 
2017-03-21 16:38 GMT+08:00 Shawn Guo <shawnguo@kernel.org>:
> From: Shawn Guo <shawn.guo@linaro.org>
>
> It adds zx296718 pll_vga clock for VGA support, so that VGA device can
> get required pixel rate from clock driver for different display mode.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Jun Nie <jun.nie@linaro.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Boyd April 7, 2017, 7:22 p.m. UTC | #2 
On 03/21, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> It adds zx296718 pll_vga clock for VGA support, so that VGA device can
> get required pixel rate from clock driver for different display mode.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Applied to clk-next
diff mbox

Patch

diff --git a/drivers/clk/zte/clk-zx296718.c b/drivers/clk/zte/clk-zx296718.c
index f2e1e8b3a8d5..8db0119bc6f7 100644
--- a/drivers/clk/zte/clk-zx296718.c
+++ b/drivers/clk/zte/clk-zx296718.c
@@ -101,6 +101,29 @@ 
 	PLL_RATE(1600000000, 0x00104221, 0x04aaaaaa),
 };
 
+static struct zx_pll_config pll_vga_table[] = {
+	PLL_RATE(36000000,  0x00102464, 0x04000000), /* 800x600@56 */
+	PLL_RATE(40000000,  0x00102864, 0x04000000), /* 800x600@60 */
+	PLL_RATE(49500000,  0x00103164, 0x04800000), /* 800x600@75 */
+	PLL_RATE(50000000,  0x00103264, 0x04000000), /* 800x600@72 */
+	PLL_RATE(56250000,  0x00103864, 0x04400000), /* 800x600@85 */
+	PLL_RATE(65000000,  0x00104164, 0x04000000), /* 1024x768@60 */
+	PLL_RATE(74375000,  0x00104a64, 0x04600000), /* 1280x720@60 */
+	PLL_RATE(75000000,  0x00104b64, 0x04800000), /* 1024x768@70 */
+	PLL_RATE(78750000,  0x00104e64, 0x04c00000), /* 1024x768@75 */
+	PLL_RATE(85500000,  0x00105564, 0x04800000), /* 1360x768@60 */
+	PLL_RATE(106500000, 0x00106a64, 0x04800000), /* 1440x900@60 */
+	PLL_RATE(108000000, 0x00106c64, 0x04000000), /* 1280x1024@60 */
+	PLL_RATE(110000000, 0x00106e64, 0x04000000), /* 1024x768@85 */
+	PLL_RATE(135000000, 0x00105a44, 0x04000000), /* 1280x1024@75 */
+	PLL_RATE(136750000, 0x00104462, 0x04600000), /* 1440x900@75 */
+	PLL_RATE(148500000, 0x00104a62, 0x04400000), /* 1920x1080@60 */
+	PLL_RATE(157000000, 0x00104e62, 0x04800000), /* 1440x900@85 */
+	PLL_RATE(157500000, 0x00104e62, 0x04c00000), /* 1280x1024@85 */
+	PLL_RATE(162000000, 0x00105162, 0x04000000), /* 1600x1200@60 */
+	PLL_RATE(193250000, 0x00106062, 0x04a00000), /* 1920x1200@60 */
+};
+
 PNAME(osc) = {
 	"osc24m",
 	"osc32k",
@@ -369,6 +392,7 @@ 
 
 static struct clk_zx_pll zx296718_pll_clk[] = {
 	ZX296718_PLL("pll_cpu",	"osc24m",	PLL_CPU_REG,	pll_cpu_table),
+	ZX296718_PLL("pll_vga",	"osc24m",	PLL_VGA_REG,	pll_vga_table),
 };
 
 static struct zx_clk_fixed_factor top_ffactor_clk[] = {