| Message ID | 1490600982-5410-4-git-send-email-yangbo.lu@nxp.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 27/03/17 10:49, Yangbo Lu wrote: > eSDHC uses tuning block for tuning procedure. So the tuning > block control register must be configured properly before tuning. > > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > Changes for v2: > - Replaced old function for mmc_host_ops.execute_tuning with > esdhc_execute_tuning to support eSDHC tuning. > Changes for v3: > - Put .execute_tuning assigning after after IS_ERR(host) check. > --- > drivers/mmc/host/sdhci-esdhc.h | 5 +++++ > drivers/mmc/host/sdhci-of-esdhc.c | 20 ++++++++++++++++++++ > 2 files changed, 25 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h > index 6869567..c4bbd74 100644 > --- a/drivers/mmc/host/sdhci-esdhc.h > +++ b/drivers/mmc/host/sdhci-esdhc.h > @@ -53,9 +53,14 @@ > #define ESDHC_CLOCK_HCKEN 0x00000002 > #define ESDHC_CLOCK_IPGEN 0x00000001 > > +/* Tuning Block Control Register */ > +#define ESDHC_TBCTL 0x120 > +#define ESDHC_TB_EN 0x00000004 > + > /* Control Register for DMA transfer */ > #define ESDHC_DMA_SYSCTL 0x40c > #define ESDHC_PERIPHERAL_CLK_SEL 0x00080000 > +#define ESDHC_FLUSH_ASYNC_FIFO 0x00040000 > #define ESDHC_DMA_SNOOP 0x00000040 > > #endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */ > diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c > index a70499a..8c8e147 100644 > --- a/drivers/mmc/host/sdhci-of-esdhc.c > +++ b/drivers/mmc/host/sdhci-of-esdhc.c > @@ -630,6 +630,25 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc, > } > } > > +static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) > +{ > + struct sdhci_host *host = mmc_priv(mmc); > + u32 val; > + > + /* Use tuning block for tuning procedure */ > + esdhc_clock_enable(host, false); > + val = sdhci_readl(host, ESDHC_DMA_SYSCTL); > + val |= ESDHC_FLUSH_ASYNC_FIFO; > + sdhci_writel(host, val, ESDHC_DMA_SYSCTL); > + > + val = sdhci_readl(host, ESDHC_TBCTL); > + val |= ESDHC_TB_EN; > + sdhci_writel(host, val, ESDHC_TBCTL); > + esdhc_clock_enable(host, true); > + > + return sdhci_execute_tuning(mmc, opcode); > +} > + > #ifdef CONFIG_PM_SLEEP > static u32 esdhc_proctl; > static int esdhc_of_suspend(struct device *dev) > @@ -787,6 +806,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) > > host->mmc_host_ops.start_signal_voltage_switch = > esdhc_signal_voltage_switch; > + host->mmc_host_ops.execute_tuning = esdhc_execute_tuning; > > esdhc_init(pdev, host); > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index 6869567..c4bbd74 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -53,9 +53,14 @@ #define ESDHC_CLOCK_HCKEN 0x00000002 #define ESDHC_CLOCK_IPGEN 0x00000001 +/* Tuning Block Control Register */ +#define ESDHC_TBCTL 0x120 +#define ESDHC_TB_EN 0x00000004 + /* Control Register for DMA transfer */ #define ESDHC_DMA_SYSCTL 0x40c #define ESDHC_PERIPHERAL_CLK_SEL 0x00080000 +#define ESDHC_FLUSH_ASYNC_FIFO 0x00040000 #define ESDHC_DMA_SNOOP 0x00000040 #endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */ diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index a70499a..8c8e147 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -630,6 +630,25 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc, } } +static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 val; + + /* Use tuning block for tuning procedure */ + esdhc_clock_enable(host, false); + val = sdhci_readl(host, ESDHC_DMA_SYSCTL); + val |= ESDHC_FLUSH_ASYNC_FIFO; + sdhci_writel(host, val, ESDHC_DMA_SYSCTL); + + val = sdhci_readl(host, ESDHC_TBCTL); + val |= ESDHC_TB_EN; + sdhci_writel(host, val, ESDHC_TBCTL); + esdhc_clock_enable(host, true); + + return sdhci_execute_tuning(mmc, opcode); +} + #ifdef CONFIG_PM_SLEEP static u32 esdhc_proctl; static int esdhc_of_suspend(struct device *dev) @@ -787,6 +806,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) host->mmc_host_ops.start_signal_voltage_switch = esdhc_signal_voltage_switch; + host->mmc_host_ops.execute_tuning = esdhc_execute_tuning; esdhc_init(pdev, host);
eSDHC uses tuning block for tuning procedure. So the tuning block control register must be configured properly before tuning. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> --- Changes for v2: - Replaced old function for mmc_host_ops.execute_tuning with esdhc_execute_tuning to support eSDHC tuning. Changes for v3: - Put .execute_tuning assigning after after IS_ERR(host) check. --- drivers/mmc/host/sdhci-esdhc.h | 5 +++++ drivers/mmc/host/sdhci-of-esdhc.c | 20 ++++++++++++++++++++ 2 files changed, 25 insertions(+)