| Message ID | 1491602410-31518-2-git-send-email-moritz.fischer@ettus.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Fri, Apr 07, 2017 at 03:00:09PM -0700, Moritz Fischer wrote: > From: Moritz Fischer <mdf@kernel.org> > > Add bindings for the Chromium EC HWMON. The Chromium EC HWMON > allows monitoring of temperature sensors and fans attached to the > EC. > > Signed-off-by: Moritz Fischer <mdf@kernel.org> > --- > .../devicetree/bindings/hwmon/cros-ec-hwmon.txt | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt > new file mode 100644 > index 0000000..4c94869 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt > @@ -0,0 +1,25 @@ > +Chromium Embedded Controller EC temperature and fan control > +----------------------------------------------------------- > + > +Google's Chromium EC HWMON is a hwmon implemented byimplemented by the Chromium EC > +firmware attached to the Embedded Controller (EC) and controlled via a host-command > +interface. > + > +An EC HWMON node should be only found as a sub-node of the EC node (see > +Documentation/devicetree/bindings/mfd/cros-ec.txt). > + > +Required properties: > +- compatible: Must contain "google,cros-ec-hwmon" > + > +Example: > + embedded-controller@1e { > + reg = <0x1e>; > + compatible = "google,cros-ec-i2c"; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + interrupt-parent = <&gpio0>; > + > + hwmon { > + compatible = "google,cros-ec-hwmon"; This is sufficient for all devices? I don't see that DT provides anything here other than instantiating a device, but the parent device can just as easily do that. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 13, 2017 at 03:01:40PM -0500, Rob Herring wrote: > On Fri, Apr 07, 2017 at 03:00:09PM -0700, Moritz Fischer wrote: > > From: Moritz Fischer <mdf@kernel.org> > > > > Add bindings for the Chromium EC HWMON. The Chromium EC HWMON > > allows monitoring of temperature sensors and fans attached to the > > EC. > > > > Signed-off-by: Moritz Fischer <mdf@kernel.org> > > --- > > .../devicetree/bindings/hwmon/cros-ec-hwmon.txt | 25 ++++++++++++++++++++++ > > 1 file changed, 25 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt > > > > diff --git a/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt > > new file mode 100644 > > index 0000000..4c94869 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt > > @@ -0,0 +1,25 @@ > > +Chromium Embedded Controller EC temperature and fan control > > +----------------------------------------------------------- > > + > > +Google's Chromium EC HWMON is a hwmon implemented byimplemented by the Chromium EC > > +firmware attached to the Embedded Controller (EC) and controlled via a host-command > > +interface. > > + > > +An EC HWMON node should be only found as a sub-node of the EC node (see > > +Documentation/devicetree/bindings/mfd/cros-ec.txt). > > + > > +Required properties: > > +- compatible: Must contain "google,cros-ec-hwmon" > > + > > +Example: > > + embedded-controller@1e { > > + reg = <0x1e>; > > + compatible = "google,cros-ec-i2c"; > > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > > + interrupt-parent = <&gpio0>; > > + > > + hwmon { > > + compatible = "google,cros-ec-hwmon"; > > This is sufficient for all devices? I don't see that DT provides > anything here other than instantiating a device, but the parent device > can just as easily do that. > The parent driver (drivers/mfd/cros_ec_i2c.c) calls cros_ec_register(), which uses uses of_platform_populate() to populate all sub-devices. There are various examples in the dts files (look for "google,cros-ec"). Does it really make sense to start a second method for instantiating sub-devices ? Thanks, Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 13, 2017 at 4:07 PM, Guenter Roeck <linux@roeck-us.net> wrote: > On Thu, Apr 13, 2017 at 03:01:40PM -0500, Rob Herring wrote: >> On Fri, Apr 07, 2017 at 03:00:09PM -0700, Moritz Fischer wrote: >> > From: Moritz Fischer <mdf@kernel.org> >> > >> > Add bindings for the Chromium EC HWMON. The Chromium EC HWMON >> > allows monitoring of temperature sensors and fans attached to the >> > EC. >> > >> > Signed-off-by: Moritz Fischer <mdf@kernel.org> >> > --- >> > .../devicetree/bindings/hwmon/cros-ec-hwmon.txt | 25 ++++++++++++++++++++++ >> > 1 file changed, 25 insertions(+) >> > create mode 100644 Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >> > >> > diff --git a/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >> > new file mode 100644 >> > index 0000000..4c94869 >> > --- /dev/null >> > +++ b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >> > @@ -0,0 +1,25 @@ >> > +Chromium Embedded Controller EC temperature and fan control >> > +----------------------------------------------------------- >> > + >> > +Google's Chromium EC HWMON is a hwmon implemented byimplemented by the Chromium EC >> > +firmware attached to the Embedded Controller (EC) and controlled via a host-command >> > +interface. >> > + >> > +An EC HWMON node should be only found as a sub-node of the EC node (see >> > +Documentation/devicetree/bindings/mfd/cros-ec.txt). >> > + >> > +Required properties: >> > +- compatible: Must contain "google,cros-ec-hwmon" >> > + >> > +Example: >> > + embedded-controller@1e { >> > + reg = <0x1e>; >> > + compatible = "google,cros-ec-i2c"; >> > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; >> > + interrupt-parent = <&gpio0>; >> > + >> > + hwmon { >> > + compatible = "google,cros-ec-hwmon"; >> >> This is sufficient for all devices? I don't see that DT provides >> anything here other than instantiating a device, but the parent device >> can just as easily do that. >> > The parent driver (drivers/mfd/cros_ec_i2c.c) calls cros_ec_register(), > which uses uses of_platform_populate() to populate all sub-devices. > There are various examples in the dts files (look for "google,cros-ec"). > Does it really make sense to start a second method for instantiating > sub-devices ? Okay, I suppose not. That wasn't clear from the example. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Apr 14, 2017 at 5:48 AM, Rob Herring <robh@kernel.org> wrote: > On Thu, Apr 13, 2017 at 4:07 PM, Guenter Roeck <linux@roeck-us.net> wrote: >> On Thu, Apr 13, 2017 at 03:01:40PM -0500, Rob Herring wrote: >>> On Fri, Apr 07, 2017 at 03:00:09PM -0700, Moritz Fischer wrote: >>> > From: Moritz Fischer <mdf@kernel.org> >>> > >>> > Add bindings for the Chromium EC HWMON. The Chromium EC HWMON >>> > allows monitoring of temperature sensors and fans attached to the >>> > EC. >>> > >>> > Signed-off-by: Moritz Fischer <mdf@kernel.org> >>> > --- >>> > .../devicetree/bindings/hwmon/cros-ec-hwmon.txt | 25 ++++++++++++++++++++++ >>> > 1 file changed, 25 insertions(+) >>> > create mode 100644 Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >>> > >>> > diff --git a/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >>> > new file mode 100644 >>> > index 0000000..4c94869 >>> > --- /dev/null >>> > +++ b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt >>> > @@ -0,0 +1,25 @@ >>> > +Chromium Embedded Controller EC temperature and fan control >>> > +----------------------------------------------------------- >>> > + >>> > +Google's Chromium EC HWMON is a hwmon implemented byimplemented by the Chromium EC >>> > +firmware attached to the Embedded Controller (EC) and controlled via a host-command >>> > +interface. >>> > + >>> > +An EC HWMON node should be only found as a sub-node of the EC node (see >>> > +Documentation/devicetree/bindings/mfd/cros-ec.txt). >>> > + >>> > +Required properties: >>> > +- compatible: Must contain "google,cros-ec-hwmon" >>> > + >>> > +Example: >>> > + embedded-controller@1e { >>> > + reg = <0x1e>; >>> > + compatible = "google,cros-ec-i2c"; >>> > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; >>> > + interrupt-parent = <&gpio0>; >>> > + >>> > + hwmon { >>> > + compatible = "google,cros-ec-hwmon"; >>> >>> This is sufficient for all devices? I don't see that DT provides >>> anything here other than instantiating a device, but the parent device >>> can just as easily do that. >>> >> The parent driver (drivers/mfd/cros_ec_i2c.c) calls cros_ec_register(), >> which uses uses of_platform_populate() to populate all sub-devices. >> There are various examples in the dts files (look for "google,cros-ec"). >> Does it really make sense to start a second method for instantiating >> sub-devices ? > > Okay, I suppose not. That wasn't clear from the example. Do you want me to clarify that in the example somehow? Moritz -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt new file mode 100644 index 0000000..4c94869 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt @@ -0,0 +1,25 @@ +Chromium Embedded Controller EC temperature and fan control +----------------------------------------------------------- + +Google's Chromium EC HWMON is a hwmon implemented byimplemented by the Chromium EC +firmware attached to the Embedded Controller (EC) and controlled via a host-command +interface. + +An EC HWMON node should be only found as a sub-node of the EC node (see +Documentation/devicetree/bindings/mfd/cros-ec.txt). + +Required properties: +- compatible: Must contain "google,cros-ec-hwmon" + +Example: + embedded-controller@1e { + reg = <0x1e>; + compatible = "google,cros-ec-i2c"; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio0>; + + hwmon { + compatible = "google,cros-ec-hwmon"; + }; +}; +