| Message ID | 20170403154829.29780-2-zajec5@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Eduardo Valentin |
| Headers | show |
On Mon, Apr 03, 2017 at 05:48:29PM +0200, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > Northstar is a SoC family commonly used in home routers. This commit > adds a driver for checking CPU temperature. As Northstar Plus seems to > also have this IP block this new symbol gets ARCH_BCM_IPROC dependency. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > Signed-off-by: Jon Mason <jon.mason@broadcom.com> If no objection, I am applying this series. > --- > V2: Make it iProc specific as NSP can also use this driver > Select proper symbols in config ARCH_BCM_IPROC > Define PVTMON register bits > Update code selecting temperature monitor mode > Thank you Jon! > V3: More details in help message for BCM_NS_THERMAL > Use slope & offset > Drop arch code change (I'll be submitted using a proper tree) > Thank you Eduardo! > V4: Comment operations on PVTMON_CONTROL0 register > --- > drivers/thermal/Kconfig | 5 ++ > drivers/thermal/Makefile | 1 + > drivers/thermal/broadcom/Kconfig | 8 +++ > drivers/thermal/broadcom/Makefile | 1 + > drivers/thermal/broadcom/ns-thermal.c | 105 ++++++++++++++++++++++++++++++++++ > 5 files changed, 120 insertions(+) > create mode 100644 drivers/thermal/broadcom/Kconfig > create mode 100644 drivers/thermal/broadcom/Makefile > create mode 100644 drivers/thermal/broadcom/ns-thermal.c > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 3bd24063375e..ac7301703d03 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -392,6 +392,11 @@ config MTK_THERMAL > Enable this option if you want to have support for thermal management > controller present in Mediatek SoCs > > +menu "Broadcom thermal drivers" > +depends on ARCH_BCM || COMPILE_TEST > +source "drivers/thermal/broadcom/Kconfig" > +endmenu > + > menu "Texas Instruments thermal drivers" > depends on ARCH_HAS_BANDGAP || COMPILE_TEST > depends on HAS_IOMEM > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > index f23cde05dac6..6b7706b9f27c 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -27,6 +27,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o > thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o > > # platform thermal drivers > +obj-y += broadcom/ > obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o > obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o > obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o > diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig > new file mode 100644 > index 000000000000..f0dea8a8e002 > --- /dev/null > +++ b/drivers/thermal/broadcom/Kconfig > @@ -0,0 +1,8 @@ > +config BCM_NS_THERMAL > + tristate "Northstar thermal driver" > + depends on ARCH_BCM_IPROC || COMPILE_TEST > + help > + Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, > + BCM4709 and BCM47094. It contains DMU (Device Management Unit) block > + with a thermal sensor that allows checking CPU temperature. This > + driver provides support for it. > diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile > new file mode 100644 > index 000000000000..059df9a0ed69 > --- /dev/null > +++ b/drivers/thermal/broadcom/Makefile > @@ -0,0 +1 @@ > +obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o > diff --git a/drivers/thermal/broadcom/ns-thermal.c b/drivers/thermal/broadcom/ns-thermal.c > new file mode 100644 > index 000000000000..eab96b3572b9 > --- /dev/null > +++ b/drivers/thermal/broadcom/ns-thermal.c > @@ -0,0 +1,105 @@ > +/* > + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/platform_device.h> > +#include <linux/thermal.h> > + > +#define PVTMON_CONTROL0 0x00 > +#define PVTMON_CONTROL0_SEL_MASK 0x0000000e > +#define PVTMON_CONTROL0_SEL_TEMP_MONITOR 0x00000000 > +#define PVTMON_CONTROL0_SEL_TEST_MODE 0x0000000e > +#define PVTMON_STATUS 0x08 > + > +struct ns_thermal { > + struct thermal_zone_device *tz; > + void __iomem *pvtmon; > +}; > + > +static int ns_thermal_get_temp(void *data, int *temp) > +{ > + struct ns_thermal *ns_thermal = data; > + int offset = thermal_zone_get_offset(ns_thermal->tz); > + int slope = thermal_zone_get_slope(ns_thermal->tz); > + u32 val; > + > + val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0); > + if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) { > + /* Clear current mode selection */ > + val &= ~PVTMON_CONTROL0_SEL_MASK; > + > + /* Set temp monitor mode (it's the default actually) */ > + val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR; > + > + writel(val, ns_thermal->pvtmon + PVTMON_CONTROL0); > + } > + > + val = readl(ns_thermal->pvtmon + PVTMON_STATUS); > + *temp = slope * val + offset; > + > + return 0; > +} > + > +const struct thermal_zone_of_device_ops ns_thermal_ops = { minor correction here: -const struct thermal_zone_of_device_ops ns_thermal_ops = { +static const struct thermal_zone_of_device_ops ns_thermal_ops = { but I am applying this already in my tree. > + .get_temp = ns_thermal_get_temp, > +}; > + > +static int ns_thermal_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct ns_thermal *ns_thermal; > + > + ns_thermal = devm_kzalloc(dev, sizeof(*ns_thermal), GFP_KERNEL); > + if (!ns_thermal) > + return -ENOMEM; > + > + ns_thermal->pvtmon = of_iomap(dev_of_node(dev), 0); > + if (WARN_ON(!ns_thermal->pvtmon)) > + return -ENOENT; > + > + ns_thermal->tz = devm_thermal_zone_of_sensor_register(dev, 0, > + ns_thermal, > + &ns_thermal_ops); > + if (IS_ERR(ns_thermal->tz)) { > + iounmap(ns_thermal->pvtmon); > + return PTR_ERR(ns_thermal->tz); > + } > + > + platform_set_drvdata(pdev, ns_thermal); > + > + return 0; > +} > + > +static int ns_thermal_remove(struct platform_device *pdev) > +{ > + struct ns_thermal *ns_thermal = platform_get_drvdata(pdev); > + > + iounmap(ns_thermal->pvtmon); > + > + return 0; > +} > + > +static const struct of_device_id ns_thermal_of_match[] = { > + { .compatible = "brcm,ns-thermal", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, ns_thermal_of_match); > + > +static struct platform_driver ns_thermal_driver = { > + .probe = ns_thermal_probe, > + .remove = ns_thermal_remove, > + .driver = { > + .name = "ns-thermal", > + .of_match_table = ns_thermal_of_match, > + }, > +}; > +module_platform_driver(ns_thermal_driver); > + > +MODULE_DESCRIPTION("Northstar thermal driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.11.0 >
On 04/07/2017 06:42 AM, Eduardo Valentin wrote: > On Mon, Apr 03, 2017 at 05:48:29PM +0200, Rafał Miłecki wrote: >> From: Rafał Miłecki <rafal@milecki.pl> >> >> Northstar is a SoC family commonly used in home routers. This commit >> adds a driver for checking CPU temperature. As Northstar Plus seems to >> also have this IP block this new symbol gets ARCH_BCM_IPROC dependency. >> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> >> Signed-off-by: Jon Mason <jon.mason@broadcom.com> > > If no objection, I am applying this series. Cool, hopefully there aren't any more objections :) Once applied should I expect this in https://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git/log/?h=next ? That would allow me to move bcm2835_thermal.c to the broadcom subdir. >> +const struct thermal_zone_of_device_ops ns_thermal_ops = { > > minor correction here: > > -const struct thermal_zone_of_device_ops ns_thermal_ops = { > +static const struct thermal_zone_of_device_ops ns_thermal_ops = { > > but I am applying this already in my tree. > >> + .get_temp = ns_thermal_get_temp, >> +}; Thank you!
Hello Rafal, On Fri, Apr 14, 2017 at 02:16:36PM +0200, Rafał Miłecki wrote: > On 04/07/2017 06:42 AM, Eduardo Valentin wrote: > >On Mon, Apr 03, 2017 at 05:48:29PM +0200, Rafał Miłecki wrote: > >>From: Rafał Miłecki <rafal@milecki.pl> > >> > >>Northstar is a SoC family commonly used in home routers. This commit > >>adds a driver for checking CPU temperature. As Northstar Plus seems to > >>also have this IP block this new symbol gets ARCH_BCM_IPROC dependency. > >> > >>Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > >>Signed-off-by: Jon Mason <jon.mason@broadcom.com> > > > >If no objection, I am applying this series. > > Cool, hopefully there aren't any more objections :) Once applied should I > expect this in > https://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git/log/?h=next > ? They were already applied, but in my #linus branch. Now they are also in my #next branch. The #linus branch goes to the coming merge window. The #next branch goes to linux-next testing. Your change is now on linux-next test, kernelci testing, and for the coming merge windown. > > That would allow me to move bcm2835_thermal.c to the broadcom subdir. > > Please send the patch. > >>+const struct thermal_zone_of_device_ops ns_thermal_ops = { > > > >minor correction here: > > > >-const struct thermal_zone_of_device_ops ns_thermal_ops = { > >+static const struct thermal_zone_of_device_ops ns_thermal_ops = { > > > >but I am applying this already in my tree. > > > >>+ .get_temp = ns_thermal_get_temp, > >>+}; > > Thank you!
On 14 April 2017 at 17:16, Eduardo Valentin <edubezval@gmail.com> wrote: > Hello Rafal, > > On Fri, Apr 14, 2017 at 02:16:36PM +0200, Rafał Miłecki wrote: >> On 04/07/2017 06:42 AM, Eduardo Valentin wrote: >> >On Mon, Apr 03, 2017 at 05:48:29PM +0200, Rafał Miłecki wrote: >> >>From: Rafał Miłecki <rafal@milecki.pl> >> >> >> >>Northstar is a SoC family commonly used in home routers. This commit >> >>adds a driver for checking CPU temperature. As Northstar Plus seems to >> >>also have this IP block this new symbol gets ARCH_BCM_IPROC dependency. >> >> >> >>Signed-off-by: Rafał Miłecki <rafal@milecki.pl> >> >>Signed-off-by: Jon Mason <jon.mason@broadcom.com> >> > >> >If no objection, I am applying this series. >> >> Cool, hopefully there aren't any more objections :) Once applied should I >> expect this in >> https://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git/log/?h=next >> ? > > They were already applied, but in my #linus branch. Now they are also in > my #next branch. The #linus branch goes to the coming merge window. The > #next branch goes to linux-next testing. Your change is now on > linux-next test, kernelci testing, and for the coming merge windown. I got it, thank you!
> Rafał Miłecki <rafal@milecki.pl> hat am 14. April 2017 um 14:16 geschrieben: > > > On 04/07/2017 06:42 AM, Eduardo Valentin wrote: > > On Mon, Apr 03, 2017 at 05:48:29PM +0200, Rafał Miłecki wrote: > >> From: Rafał Miłecki <rafal@milecki.pl> > >> > >> Northstar is a SoC family commonly used in home routers. This commit > >> adds a driver for checking CPU temperature. As Northstar Plus seems to > >> also have this IP block this new symbol gets ARCH_BCM_IPROC dependency. > >> > >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > >> Signed-off-by: Jon Mason <jon.mason@broadcom.com> > > > > If no objection, I am applying this series. > > Cool, hopefully there aren't any more objections :) Once applied should I > expect this in > https://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git/log/?h=next > ? > > That would allow me to move bcm2835_thermal.c to the broadcom subdir. Thanks for doing this. Btw Northstar thermal driver misses a MODULE_AUTHOR. Regards Stefan
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 3bd24063375e..ac7301703d03 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -392,6 +392,11 @@ config MTK_THERMAL Enable this option if you want to have support for thermal management controller present in Mediatek SoCs +menu "Broadcom thermal drivers" +depends on ARCH_BCM || COMPILE_TEST +source "drivers/thermal/broadcom/Kconfig" +endmenu + menu "Texas Instruments thermal drivers" depends on ARCH_HAS_BANDGAP || COMPILE_TEST depends on HAS_IOMEM diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index f23cde05dac6..6b7706b9f27c 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -27,6 +27,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o # platform thermal drivers +obj-y += broadcom/ obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig new file mode 100644 index 000000000000..f0dea8a8e002 --- /dev/null +++ b/drivers/thermal/broadcom/Kconfig @@ -0,0 +1,8 @@ +config BCM_NS_THERMAL + tristate "Northstar thermal driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + help + Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, + BCM4709 and BCM47094. It contains DMU (Device Management Unit) block + with a thermal sensor that allows checking CPU temperature. This + driver provides support for it. diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile new file mode 100644 index 000000000000..059df9a0ed69 --- /dev/null +++ b/drivers/thermal/broadcom/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o diff --git a/drivers/thermal/broadcom/ns-thermal.c b/drivers/thermal/broadcom/ns-thermal.c new file mode 100644 index 000000000000..eab96b3572b9 --- /dev/null +++ b/drivers/thermal/broadcom/ns-thermal.c @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/thermal.h> + +#define PVTMON_CONTROL0 0x00 +#define PVTMON_CONTROL0_SEL_MASK 0x0000000e +#define PVTMON_CONTROL0_SEL_TEMP_MONITOR 0x00000000 +#define PVTMON_CONTROL0_SEL_TEST_MODE 0x0000000e +#define PVTMON_STATUS 0x08 + +struct ns_thermal { + struct thermal_zone_device *tz; + void __iomem *pvtmon; +}; + +static int ns_thermal_get_temp(void *data, int *temp) +{ + struct ns_thermal *ns_thermal = data; + int offset = thermal_zone_get_offset(ns_thermal->tz); + int slope = thermal_zone_get_slope(ns_thermal->tz); + u32 val; + + val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0); + if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) { + /* Clear current mode selection */ + val &= ~PVTMON_CONTROL0_SEL_MASK; + + /* Set temp monitor mode (it's the default actually) */ + val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR; + + writel(val, ns_thermal->pvtmon + PVTMON_CONTROL0); + } + + val = readl(ns_thermal->pvtmon + PVTMON_STATUS); + *temp = slope * val + offset; + + return 0; +} + +const struct thermal_zone_of_device_ops ns_thermal_ops = { + .get_temp = ns_thermal_get_temp, +}; + +static int ns_thermal_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ns_thermal *ns_thermal; + + ns_thermal = devm_kzalloc(dev, sizeof(*ns_thermal), GFP_KERNEL); + if (!ns_thermal) + return -ENOMEM; + + ns_thermal->pvtmon = of_iomap(dev_of_node(dev), 0); + if (WARN_ON(!ns_thermal->pvtmon)) + return -ENOENT; + + ns_thermal->tz = devm_thermal_zone_of_sensor_register(dev, 0, + ns_thermal, + &ns_thermal_ops); + if (IS_ERR(ns_thermal->tz)) { + iounmap(ns_thermal->pvtmon); + return PTR_ERR(ns_thermal->tz); + } + + platform_set_drvdata(pdev, ns_thermal); + + return 0; +} + +static int ns_thermal_remove(struct platform_device *pdev) +{ + struct ns_thermal *ns_thermal = platform_get_drvdata(pdev); + + iounmap(ns_thermal->pvtmon); + + return 0; +} + +static const struct of_device_id ns_thermal_of_match[] = { + { .compatible = "brcm,ns-thermal", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ns_thermal_of_match); + +static struct platform_driver ns_thermal_driver = { + .probe = ns_thermal_probe, + .remove = ns_thermal_remove, + .driver = { + .name = "ns-thermal", + .of_match_table = ns_thermal_of_match, + }, +}; +module_platform_driver(ns_thermal_driver); + +MODULE_DESCRIPTION("Northstar thermal driver"); +MODULE_LICENSE("GPL v2");