[13/15] drm/sun4i: Add HDMI support

Commit Message

Maxime Ripard March 7, 2017, 8:56 a.m. UTC

The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
controller.

That HDMI controller is able to do audio and CEC, but those have been left
out for now.

Signed-off-by: Maxime Ripard <[e-mail]>
---
 drivers/gpu/drm/sun4i/Makefile              |   5 +-
 drivers/gpu/drm/sun4i/sun4i_hdmi.h          | 124 ++++++-
 drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c  | 128 ++++++-
 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c      | 449 +++++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c | 236 +++++++++++-
 5 files changed, 942 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi.h
 create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
 create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
 create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c

Comments

Chen-Yu Tsai April 21, 2017, 3:17 p.m. UTC | #1

Hi,

On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard
<[e-mail]> wrote:
> The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
> controller.
>
> That HDMI controller is able to do audio and CEC, but those have been left
> out for now.
>
> Signed-off-by: Maxime Ripard <[e-mail]>
> ---
>  drivers/gpu/drm/sun4i/Makefile              |   5 +-
>  drivers/gpu/drm/sun4i/sun4i_hdmi.h          | 124 ++++++-
>  drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c  | 128 ++++++-
>  drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c      | 449 +++++++++++++++++++++-
>  drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c | 236 +++++++++++-
>  5 files changed, 942 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi.h
>  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
>  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
>  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c

Applying patch #9608371 using 'git am'
Description: [13/15] drm/sun4i: Add HDMI support
Applying: drm/sun4i: Add HDMI support
.git/rebase-apply/patch:116: trailing whitespace.

.git/rebase-apply/patch:531: trailing whitespace.

.git/rebase-apply/patch:701: trailing whitespace.

warning: 3 lines add whitespace errors.

> diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
> index 59b757350a1f..68a0f6244a59 100644
> --- a/drivers/gpu/drm/sun4i/Makefile
> +++ b/drivers/gpu/drm/sun4i/Makefile
> @@ -7,7 +7,12 @@ sun4i-tcon-y += sun4i_dotclock.o
>  sun4i-tcon-y += sun4i_crtc.o
>  sun4i-tcon-y += sun4i_layer.o
>
> +sun4i-drm-hdmi-y += sun4i_hdmi_enc.o
> +sun4i-drm-hdmi-y += sun4i_hdmi_ddc_clk.o
> +sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
> +
>  obj-$(CONFIG_DRM_SUN4I)                += sun4i-drm.o sun4i-tcon.o
>  obj-$(CONFIG_DRM_SUN4I)                += sun4i_backend.o
>  obj-$(CONFIG_DRM_SUN4I)                += sun6i_drc.o
> +obj-$(CONFIG_DRM_SUN4I)                += sun4i-drm-hdmi.o
>  obj-$(CONFIG_DRM_SUN4I)                += sun4i_tv.o
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> new file mode 100644
> index 000000000000..2ad25b8fd3cd
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> @@ -0,0 +1,124 @@
> +/*
> + * Copyright (C) 2016 Maxime Ripard
> + *
> + * Maxime Ripard <[e-mail]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +#ifndef _SUN4I_HDMI_H_
> +#define _SUN4I_HDMI_H_
> +
> +#include <drm/drm_connector.h>
> +#include <drm/drm_encoder.h>
> +
> +#define SUN4I_HDMI_CTRL_REG            0x004
> +#define SUN4I_HDMI_CTRL_ENABLE                 BIT(31)
> +
> +#define SUN4I_HDMI_IRQ_REG             0x008
> +#define SUN4I_HDMI_IRQ_STA_MASK                        0x73
> +#define SUN4I_HDMI_IRQ_STA_FIFO_OF             BIT(1)
> +#define SUN4I_HDMI_IRQ_STA_FIFO_UF             BIT(0)
> +
> +#define SUN4I_HDMI_HPD_REG             0x00c
> +#define SUN4I_HDMI_HPD_HIGH                    BIT(0)
> +
> +#define SUN4I_HDMI_VID_CTRL_REG                0x010
> +#define SUN4I_HDMI_VID_CTRL_ENABLE             BIT(31)
> +#define SUN4I_HDMI_VID_CTRL_HDMI_MODE          BIT(30)
> +
> +#define SUN4I_HDMI_VID_TIMING_ACT_REG  0x014
> +#define SUN4I_HDMI_VID_TIMING_BP_REG   0x018
> +#define SUN4I_HDMI_VID_TIMING_FP_REG   0x01c
> +#define SUN4I_HDMI_VID_TIMING_SPW_REG  0x020
> +
> +#define SUN4I_HDMI_VID_TIMING_X(x)             ((((x) - 1) & GENMASK(11, 0)))
> +#define SUN4I_HDMI_VID_TIMING_Y(y)             ((((y) - 1) & GENMASK(11, 0)) << 16)
> +
> +#define SUN4I_HDMI_VID_TIMING_POL_REG  0x024
> +#define SUN4I_HDMI_VID_TIMING_POL_TX_CLK        (0x3e0 << 16)
> +#define SUN4I_HDMI_VID_TIMING_POL_VSYNC                BIT(1)
> +#define SUN4I_HDMI_VID_TIMING_POL_HSYNC                BIT(0)
> +
> +#define SUN4I_HDMI_AVI_INFOFRAME_REG(n)        (0x080 + (n))
> +
> +#define SUN4I_HDMI_PAD_CTRL0_REG       0x200
> +
> +#define SUN4I_HDMI_PAD_CTRL1_REG       0x204
> +#define SUN4I_HDMI_PAD_CTRL1_HALVE_CLK         BIT(6)
> +
> +#define SUN4I_HDMI_PLL_CTRL_REG                0x208
> +#define SUN4I_HDMI_PLL_CTRL_DIV(n)             ((n) << 4)
> +#define SUN4I_HDMI_PLL_CTRL_DIV_MASK           GENMASK(7, 4)
> +
> +#define SUN4I_HDMI_PLL_DBG0_REG                0x20c
> +#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT(n)     (((n) & 1) << 21)
> +#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_MASK   BIT(21)
> +#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_SHIFT  21
> +
> +#define SUN4I_HDMI_PKT_CTRL_REG(n)     (0x2f0 + (4 * (n)))
> +#define SUN4I_HDMI_PKT_CTRL_TYPE(n, t)         ((t) << (((n) % 4) * 4))
> +
> +#define SUN4I_HDMI_UNKNOWN_REG         0x300
> +#define SUN4I_HDMI_UNKNOWN_INPUT_SYNC          BIT(27)
> +
> +#define SUN4I_HDMI_DDC_CTRL_REG                0x500
> +#define SUN4I_HDMI_DDC_CTRL_ENABLE             BIT(31)
> +#define SUN4I_HDMI_DDC_CTRL_START_CMD          BIT(30)
> +#define SUN4I_HDMI_DDC_CTRL_RESET              BIT(0)
> +
> +#define SUN4I_HDMI_DDC_ADDR_REG                0x504
> +#define SUN4I_HDMI_DDC_ADDR_SEGMENT(seg)       (((seg) & 0xff) << 24)
> +#define SUN4I_HDMI_DDC_ADDR_EDDC(addr)         (((addr) & 0xff) << 16)
> +#define SUN4I_HDMI_DDC_ADDR_OFFSET(off)                (((off) & 0xff) << 8)
> +#define SUN4I_HDMI_DDC_ADDR_SLAVE(addr)                ((addr) & 0xff)
> +
> +#define SUN4I_HDMI_DDC_FIFO_CTRL_REG   0x510
> +#define SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR         BIT(31)
> +
> +#define SUN4I_HDMI_DDC_FIFO_DATA_REG   0x518
> +#define SUN4I_HDMI_DDC_BYTE_COUNT_REG  0x51c
> +
> +#define SUN4I_HDMI_DDC_CMD_REG         0x520
> +#define SUN4I_HDMI_DDC_CMD_EXPLICIT_EDDC_READ  6
> +
> +#define SUN4I_HDMI_DDC_CLK_REG         0x528
> +#define SUN4I_HDMI_DDC_CLK_M(m)                        (((m) & 0x7) << 3)
> +#define SUN4I_HDMI_DDC_CLK_N(n)                        ((n) & 0x7)
> +
> +#define SUN4I_HDMI_DDC_LINE_CTRL_REG   0x540
> +#define SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE    BIT(9)
> +#define SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE    BIT(8)
> +
> +#define SUN4I_HDMI_DDC_FIFO_SIZE       16
> +
> +enum sun4i_hdmi_pkt_type {
> +       SUN4I_HDMI_PKT_AVI = 2,
> +       SUN4I_HDMI_PKT_END = 15,
> +};
> +
> +struct sun4i_hdmi {
> +       struct drm_connector    connector;
> +       struct drm_encoder      encoder;
> +       struct device           *dev;
> +
> +       void __iomem            *base;
> +       struct clk              *bus_clk;
> +       struct clk              *ddc_clk;
> +       struct clk              *mod_clk;
> +       struct clk              *pll0_clk;
> +       struct clk              *pll1_clk;
> +       struct clk              *tmds_clk;
> +
> +       struct sun4i_drv        *drv;
> +
> +       bool                    hdmi_monitor;
> +};
> +
> +int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *clk);
> +int sun4i_tmds_create(struct sun4i_hdmi *hdmi);
> +
> +#endif /* _SUN4I_HDMI_H_ */
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
> new file mode 100644
> index 000000000000..5125b14ea7a5
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
> @@ -0,0 +1,128 @@
> +/*
> + * Copyright (C) 2016 Free Electrons
> + * Copyright (C) 2016 NextThing Co
> + *
> + * Maxime Ripard <[e-mail]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +#include <linux/clk-provider.h>
> +
> +#include "sun4i_tcon.h"
> +#include "sun4i_hdmi.h"
> +
> +struct sun4i_ddc {
> +       struct clk_hw           hw;
> +       struct sun4i_hdmi       *hdmi;
> +};
> +
> +static inline struct sun4i_ddc *hw_to_ddc(struct clk_hw *hw)
> +{
> +       return container_of(hw, struct sun4i_ddc, hw);
> +}
> +
> +static unsigned long sun4i_ddc_calc_divider(unsigned long rate,
> +                                           unsigned long parent_rate,
> +                                           u8 *m, u8 *n)
> +{
> +       unsigned long best_rate = 0;
> +       u8 best_m = 0, best_n = 0, _m, _n;
> +
> +       for (_m = 0; _m < 8; _m++) {
> +               for (_n = 0; _n < 8; _n++) {
> +                       unsigned long tmp_rate;
> +
> +                       tmp_rate = (((parent_rate / 2) / 10) >> _n) / (_m + 1);
> +
> +                       if (tmp_rate > rate)
> +                               continue;
> +
> +                       if (abs(rate - tmp_rate) < abs(rate - best_rate)) {
> +                               best_rate = tmp_rate;
> +                               best_m = _m;
> +                               best_n = _n;
> +                       }
> +               }
> +       }
> +
> +       if (m && n) {
> +               *m = best_m;
> +               *n = best_n;
> +       }
> +
> +       return best_rate;
> +}
> +
> +static long sun4i_ddc_round_rate(struct clk_hw *hw, unsigned long rate,
> +                                unsigned long *prate)
> +{
> +       return sun4i_ddc_calc_divider(rate, *prate, NULL, NULL);
> +}
> +
> +static unsigned long sun4i_ddc_recalc_rate(struct clk_hw *hw,
> +                                           unsigned long parent_rate)
> +{
> +       struct sun4i_ddc *ddc = hw_to_ddc(hw);
> +       u32 reg;
> +       u8 m, n;
> +
> +       reg = readl(ddc->hdmi->base + SUN4I_HDMI_DDC_CLK_REG);
> +       m = (reg >> 3) & 0x7;
> +       n = reg & 0x7;
> +
> +       return (((parent_rate / 2) / 10) >> n) / (m + 1);
> +}
> +
> +static int sun4i_ddc_set_rate(struct clk_hw *hw, unsigned long rate,
> +                             unsigned long parent_rate)
> +{
> +       struct sun4i_ddc *ddc = hw_to_ddc(hw);
> +       u8 div_m, div_n;
> +
> +       sun4i_ddc_calc_divider(rate, parent_rate, &div_m, &div_n);
> +
> +       writel(SUN4I_HDMI_DDC_CLK_M(div_m) | SUN4I_HDMI_DDC_CLK_N(div_n),
> +              ddc->hdmi->base + SUN4I_HDMI_DDC_CLK_REG);
> +
> +       return 0;
> +}
> +
> +static const struct clk_ops sun4i_ddc_ops = {
> +       .recalc_rate    = sun4i_ddc_recalc_rate,
> +       .round_rate     = sun4i_ddc_round_rate,
> +       .set_rate       = sun4i_ddc_set_rate,
> +};
> +
> +int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *parent)
> +{
> +       struct clk_init_data init;
> +       struct sun4i_ddc *ddc;
> +       const char *parent_name;
> +
> +       parent_name = __clk_get_name(parent);
> +       if (!parent_name)
> +               return -ENODEV;
> +
> +       ddc = devm_kzalloc(hdmi->dev, sizeof(*ddc), GFP_KERNEL);
> +       if (!ddc)
> +               return -ENOMEM;
> +
> +       init.name = "hdmi-ddc";
> +       init.ops = &sun4i_ddc_ops;
> +       init.parent_names = &parent_name;
> +       init.num_parents = 1;
> +       init.flags = CLK_SET_RATE_PARENT;

I don't think this is really needed. It probably doesn't hurt though,
since DDC is used when HDMI is not used for displaying, but it might
affect any upstream PLLs, which theoretically may affect other users
of said PLLs. The DDC clock is slow enough that we should be able to
generate a usable clock rate anyway.

> +
> +       ddc->hdmi = hdmi;
> +       ddc->hw.init = &init;
> +
> +       hdmi->ddc_clk = devm_clk_register(hdmi->dev, &ddc->hw);
> +       if (IS_ERR(hdmi->ddc_clk))
> +               return PTR_ERR(hdmi->ddc_clk);
> +
> +       return 0;
> +}
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> new file mode 100644
> index 000000000000..33175308c2ed
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> @@ -0,0 +1,449 @@
> +/*
> + * Copyright (C) 2016 Maxime Ripard
> + *
> + * Maxime Ripard <[e-mail]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drm_encoder.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/iopoll.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "sun4i_backend.h"
> +#include "sun4i_drv.h"
> +#include "sun4i_hdmi.h"
> +#include "sun4i_tcon.h"
> +
> +static inline struct sun4i_hdmi *
> +drm_encoder_to_sun4i_hdmi(struct drm_encoder *encoder)
> +{
> +       return container_of(encoder, struct sun4i_hdmi,
> +                           encoder);
> +}
> +
> +static inline struct sun4i_hdmi *
> +drm_connector_to_sun4i_hdmi(struct drm_connector *connector)
> +{
> +       return container_of(connector, struct sun4i_hdmi,
> +                           connector);
> +}
> +
> +static int sun4i_hdmi_setup_avi_infoframes(struct sun4i_hdmi *hdmi,
> +                                          struct drm_display_mode *mode)
> +{
> +       struct hdmi_avi_infoframe frame;
> +       u8 buffer[17];
> +       int i, ret;
> +
> +       ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
> +       if (ret < 0) {
> +               DRM_ERROR("Failed to get infoframes from mode\n");
> +               return ret;
> +       }
> +
> +       ret = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
> +       if (ret < 0) {
> +               DRM_ERROR("Failed to pack infoframes\n");
> +               return ret;
> +       }
> +
> +       for (i = 0; i < sizeof(buffer); i++)
> +               writeb(buffer[i], hdmi->base + SUN4I_HDMI_AVI_INFOFRAME_REG(i));
> +
> +       return 0;
> +}
> +
> +static void sun4i_hdmi_disable(struct drm_encoder *encoder)
> +{
> +       struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
> +       struct sun4i_drv *drv = hdmi->drv;
> +       struct sun4i_tcon *tcon = drv->tcon;
> +       u32 val;
> +
> +       DRM_DEBUG_DRIVER("Disabling the HDMI Output\n");
> +
> +       val = readl(hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
> +       val &= ~SUN4I_HDMI_VID_CTRL_ENABLE;
> +       writel(val, hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
> +
> +       sun4i_tcon_channel_disable(tcon, 1);
> +}
> +
> +static void sun4i_hdmi_enable(struct drm_encoder *encoder)
> +{
> +       struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> +       struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
> +       struct sun4i_drv *drv = hdmi->drv;
> +       struct sun4i_tcon *tcon = drv->tcon;
> +       u32 val = 0;
> +
> +       DRM_DEBUG_DRIVER("Enabling the HDMI Output\n");
> +
> +       sun4i_tcon_channel_enable(tcon, 1);
> +
> +       sun4i_hdmi_setup_avi_infoframes(hdmi, mode);
> +       val |= SUN4I_HDMI_PKT_CTRL_TYPE(0, SUN4I_HDMI_PKT_AVI);
> +       val |= SUN4I_HDMI_PKT_CTRL_TYPE(1, SUN4I_HDMI_PKT_END);
> +       writel(val, hdmi->base + SUN4I_HDMI_PKT_CTRL_REG(0));
> +
> +       val = SUN4I_HDMI_VID_CTRL_ENABLE;
> +       if (hdmi->hdmi_monitor)
> +               val |= SUN4I_HDMI_VID_CTRL_HDMI_MODE;
> +
> +       writel(val, hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
> +}
> +
> +static void sun4i_hdmi_mode_set(struct drm_encoder *encoder,
> +                               struct drm_display_mode *mode,
> +                               struct drm_display_mode *adjusted_mode)
> +{
> +       struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
> +       struct sun4i_drv *drv = hdmi->drv;
> +       struct sun4i_tcon *tcon = drv->tcon;
> +       unsigned int x, y;
> +       u32 val;
> +
> +       sun4i_tcon1_mode_set(tcon, encoder, mode);
> +       clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000);
> +       clk_set_rate(hdmi->tmds_clk, mode->crtc_clock * 1000);
> +
> +       /* Set input sync enable */
> +       writel(SUN4I_HDMI_UNKNOWN_INPUT_SYNC,
> +              hdmi->base + SUN4I_HDMI_UNKNOWN_REG);
> +
> +       /* Setup timing registers */
> +       writel(SUN4I_HDMI_VID_TIMING_X(mode->hdisplay) |
> +              SUN4I_HDMI_VID_TIMING_Y(mode->vdisplay),
> +              hdmi->base + SUN4I_HDMI_VID_TIMING_ACT_REG);
> +
> +       x = mode->htotal - mode->hsync_start;
> +       y = mode->vtotal - mode->vsync_start;

I'm a bit skeptical about this one. All the other parameters are not
inclusive of other, why would this one be different? Shouldn't it
be "Xtotal - Xsync_end" instead?

> +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> +              hdmi->base + SUN4I_HDMI_VID_TIMING_BP_REG);
> +
> +       x = mode->hsync_start - mode->hdisplay;
> +       y = mode->vsync_start - mode->vdisplay;
> +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> +              hdmi->base + SUN4I_HDMI_VID_TIMING_FP_REG);
> +
> +       x = mode->hsync_end - mode->hsync_start;
> +       y = mode->vsync_end - mode->vsync_start;
> +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> +              hdmi->base + SUN4I_HDMI_VID_TIMING_SPW_REG);
> +
> +       val = SUN4I_HDMI_VID_TIMING_POL_TX_CLK;
> +       if (mode->flags & DRM_MODE_FLAG_PHSYNC)
> +               val |= SUN4I_HDMI_VID_TIMING_POL_HSYNC;
> +
> +       if (mode->flags & DRM_MODE_FLAG_PVSYNC)
> +               val |= SUN4I_HDMI_VID_TIMING_POL_VSYNC;
> +
> +       writel(val, hdmi->base + SUN4I_HDMI_VID_TIMING_POL_REG);

You don't handle the interlaced video here, even though you set

    hdmi->connector.interlace_allowed = true

later.

The double clock and double scan flags aren't handled either, though
I don't understand which one is supposed to represent the need for the
HDMI pixel repeater. AFAIK this is required for resolutions with pixel
clocks lower than 25 MHz, the lower limit of HDMI's TMDS link.

> +}
> +
> +static struct drm_encoder_helper_funcs sun4i_hdmi_helper_funcs = {
> +       .disable        = sun4i_hdmi_disable,
> +       .enable         = sun4i_hdmi_enable,
> +       .mode_set       = sun4i_hdmi_mode_set,
> +};
> +
> +static struct drm_encoder_funcs sun4i_hdmi_funcs = {
> +       .destroy        = drm_encoder_cleanup,
> +};
> +
> +static int sun4i_hdmi_read_sub_block(struct sun4i_hdmi *hdmi,
> +                                    unsigned int blk, unsigned int offset,
> +                                    u8 *buf, unsigned int count)
> +{
> +       unsigned long reg;
> +       int i;
> +
> +       reg = readl(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
> +       writel(reg | SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR,
> +              hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
> +       writel(SUN4I_HDMI_DDC_ADDR_SEGMENT(offset >> 8) |
> +              SUN4I_HDMI_DDC_ADDR_EDDC(0x60) |
> +              SUN4I_HDMI_DDC_ADDR_OFFSET(offset) |
> +              SUN4I_HDMI_DDC_ADDR_SLAVE(0x50),

You can use DDC_ADDR from drm_edid.h.

> +              hdmi->base + SUN4I_HDMI_DDC_ADDR_REG);
> +
> +       writel(count, hdmi->base + SUN4I_HDMI_DDC_BYTE_COUNT_REG);
> +       writel(SUN4I_HDMI_DDC_CMD_EXPLICIT_EDDC_READ,
> +              hdmi->base + SUN4I_HDMI_DDC_CMD_REG);
> +
> +       reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> +       writel(reg | SUN4I_HDMI_DDC_CTRL_START_CMD,
> +              hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> +
> +       if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
> +                              !(reg & SUN4I_HDMI_DDC_CTRL_START_CMD),
> +                              100, 2000))
> +               return -EIO;
> +
> +       for (i = 0; i < count; i++)
> +               buf[i] = readb(hdmi->base + SUN4I_HDMI_DDC_FIFO_DATA_REG);
> +
> +       return 0;
> +}
> +
> +static int sun4i_hdmi_read_edid_block(void *data, u8 *buf, unsigned int blk,
> +                                     size_t length)
> +{
> +       struct sun4i_hdmi *hdmi = data;
> +       int retry = 2, i;
> +
> +       do {
> +               for (i = 0; i < length; i += SUN4I_HDMI_DDC_FIFO_SIZE) {
> +                       unsigned char offset = blk * EDID_LENGTH + i;
> +                       unsigned int count = min((unsigned int)SUN4I_HDMI_DDC_FIFO_SIZE,
> +                                                length - i);
> +                       int ret;
> +
> +                       ret = sun4i_hdmi_read_sub_block(hdmi, blk, offset,
> +                                                       buf + i, count);
> +                       if (ret)
> +                               return ret;
> +               }
> +       } while (!drm_edid_block_valid(buf, blk, true, NULL) && (retry--));
> +
> +       return 0;
> +}
> +
> +static int sun4i_hdmi_get_modes(struct drm_connector *connector)
> +{
> +       struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
> +       unsigned long reg;
> +       struct edid *edid;
> +       int ret;
> +
> +       /* Reset i2c controller */
> +       writel(SUN4I_HDMI_DDC_CTRL_ENABLE | SUN4I_HDMI_DDC_CTRL_RESET,
> +              hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
> +       if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
> +                              !(reg & SUN4I_HDMI_DDC_CTRL_RESET),
> +                              100, 2000))
> +               return -EIO;
> +
> +       writel(SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE |
> +              SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE,
> +              hdmi->base + SUN4I_HDMI_DDC_LINE_CTRL_REG);
> +
> +       clk_set_rate(hdmi->ddc_clk, 100000);
> +
> +       edid = drm_do_get_edid(connector, sun4i_hdmi_read_edid_block, hdmi);
> +       if (!edid)
> +               return 0;
> +
> +       hdmi->hdmi_monitor = drm_detect_hdmi_monitor(edid);
> +       DRM_DEBUG_DRIVER("Monitor is %s monitor\n",
> +                        hdmi->hdmi_monitor ? "an HDMI" : "a DVI");
> +
> +       drm_mode_connector_update_edid_property(connector, edid);
> +       ret = drm_add_edid_modes(connector, edid);
> +       kfree(edid);
> +
> +       return ret;
> +}
> +
> +static struct drm_connector_helper_funcs sun4i_hdmi_connector_helper_funcs = {
> +       .get_modes      = sun4i_hdmi_get_modes,
> +};
> +
> +static enum drm_connector_status
> +sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force)
> +{
> +       struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
> +       unsigned long reg;
> +
> +       if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_HPD_REG, reg,
> +                              reg & SUN4I_HDMI_HPD_HIGH,
> +                              0, 500000))

We shouldn't need to do polling here. It should just return the status
at the instance it's called. Instead we should have a worker that does
polling to check if something is plugged or unplugged. I don't see any
interrupt bits for this though. :(

> +               return connector_status_disconnected;
> +
> +       return connector_status_connected;
> +}
> +
> +static struct drm_connector_funcs sun4i_hdmi_connector_funcs = {
> +       .dpms                   = drm_atomic_helper_connector_dpms,
> +       .detect                 = sun4i_hdmi_connector_detect,
> +       .fill_modes             = drm_helper_probe_single_connector_modes,
> +       .destroy                = drm_connector_cleanup,
> +       .reset                  = drm_atomic_helper_connector_reset,
> +       .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +       .atomic_destroy_state   = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int sun4i_hdmi_bind(struct device *dev, struct device *master,
> +                        void *data)
> +{
> +       struct drm_device *drm = data;
> +       struct sun4i_drv *drv = drm->dev_private;
> +       struct sun4i_hdmi *hdmi = dev_get_drvdata(dev);
> +       int ret;
> +
> +       hdmi->drv = drv;
> +       drm_encoder_helper_add(&hdmi->encoder,
> +                              &sun4i_hdmi_helper_funcs);
> +       ret = drm_encoder_init(drm,
> +                              &hdmi->encoder,
> +                              &sun4i_hdmi_funcs,
> +                              DRM_MODE_ENCODER_TMDS,
> +                              NULL);
> +       if (ret) {
> +               dev_err(dev, "Couldn't initialise the HDMI encoder\n");
> +               return ret;
> +       }
> +
> +       hdmi->encoder.possible_crtcs = BIT(0);

You can use drm_of_find_possible_crtcs() now. See the TV encoder driver.

> +
> +       drm_connector_helper_add(&hdmi->connector,
> +                                &sun4i_hdmi_connector_helper_funcs);
> +       ret = drm_connector_init(drm, &hdmi->connector,
> +                                &sun4i_hdmi_connector_funcs,
> +                                DRM_MODE_CONNECTOR_HDMIA);
> +       if (ret) {
> +               dev_err(dev,
> +                       "Couldn't initialise the Composite connector\n");

Wrong connector.

> +               goto err_cleanup_connector;
> +       }
> +       hdmi->connector.interlace_allowed = true;
> +
> +       drm_mode_connector_attach_encoder(&hdmi->connector, &hdmi->encoder);
> +
> +       return 0;
> +
> +err_cleanup_connector:
> +       drm_encoder_cleanup(&hdmi->encoder);
> +       return ret;
> +}
> +
> +static void sun4i_hdmi_unbind(struct device *dev, struct device *master,
> +                           void *data)
> +{
> +       struct sun4i_hdmi *hdmi = dev_get_drvdata(dev);
> +
> +       drm_connector_cleanup(&hdmi->connector);
> +       drm_encoder_cleanup(&hdmi->encoder);
> +}
> +
> +static struct component_ops sun4i_hdmi_ops = {
> +       .bind   = sun4i_hdmi_bind,
> +       .unbind = sun4i_hdmi_unbind,
> +};
> +
> +static int sun4i_hdmi_probe(struct platform_device *pdev)
> +{
> +       struct sun4i_hdmi *hdmi;
> +       struct resource *res;
> +       int ret;
> +
> +       hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
> +       if (!hdmi)
> +               return -ENOMEM;
> +       dev_set_drvdata(&pdev->dev, hdmi);
> +       hdmi->dev = &pdev->dev;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       hdmi->base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(hdmi->base)) {
> +               dev_err(&pdev->dev, "Couldn't map the HDMI encoder registers\n");
> +               return PTR_ERR(hdmi->base);
> +       }
> +
> +       hdmi->bus_clk = devm_clk_get(&pdev->dev, "ahb");
> +       if (IS_ERR(hdmi->bus_clk)) {
> +               dev_err(&pdev->dev, "Couldn't get the HDMI bus clock\n");
> +               return PTR_ERR(hdmi->bus_clk);
> +       }
> +       clk_prepare_enable(hdmi->bus_clk);
> +
> +       hdmi->mod_clk = devm_clk_get(&pdev->dev, "mod");
> +       if (IS_ERR(hdmi->mod_clk)) {
> +               dev_err(&pdev->dev, "Couldn't get the HDMI mod clock\n");
> +               return PTR_ERR(hdmi->mod_clk);
> +       }
> +       clk_prepare_enable(hdmi->mod_clk);
> +
> +       hdmi->pll0_clk = devm_clk_get(&pdev->dev, "pll-0");
> +       if (IS_ERR(hdmi->pll0_clk)) {
> +               dev_err(&pdev->dev, "Couldn't get the HDMI PLL 0 clock\n");
> +               return PTR_ERR(hdmi->pll0_clk);
> +       }
> +
> +       hdmi->pll1_clk = devm_clk_get(&pdev->dev, "pll-1");
> +       if (IS_ERR(hdmi->pll1_clk)) {
> +               dev_err(&pdev->dev, "Couldn't get the HDMI PLL 1 clock\n");
> +               return PTR_ERR(hdmi->pll1_clk);
> +       }
> +
> +       ret = sun4i_tmds_create(hdmi);
> +       if (ret) {
> +               dev_err(&pdev->dev, "Couldn't create the TMDS clock\n");
> +               return ret;
> +       }
> +
> +       writel(SUN4I_HDMI_CTRL_ENABLE, hdmi->base + SUN4I_HDMI_CTRL_REG);
> +
> +#define SUN4I_HDMI_PAD_CTRL0 0xfe800000
> +
> +       writel(SUN4I_HDMI_PAD_CTRL0, hdmi->base + SUN4I_HDMI_PAD_CTRL0_REG);
> +
> +       /* TODO: defines */
> +       writel((6 << 3) | (2 << 10) | BIT(14) | BIT(15) |
> +              BIT(19) | BIT(20) | BIT(22) | BIT(23),
> +              hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
> +
> +       /* TODO: defines */
> +       writel((8 << 0) | (7 << 8) | (239 << 12) | (7 << 17) | (4 << 20) |
> +              BIT(25) | BIT(27) | BIT(28) | BIT(29) | BIT(30) | BIT(31),
> +              hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);

FYI some bits in this register look a lot like the MIPI PLL on the A33.
Bit 31 looks like the enable bit.

> +
> +       ret = sun4i_ddc_create(hdmi, hdmi->tmds_clk);
> +       if (ret) {
> +               dev_err(&pdev->dev, "Couldn't create the DDC clock\n");
> +               return ret;
> +       }

We do all this in the bind function for all the other components.
Any particular reason to do it differently here?

> +
> +       return component_add(&pdev->dev, &sun4i_hdmi_ops);
> +}
> +
> +static int sun4i_hdmi_remove(struct platform_device *pdev)
> +{
> +       component_del(&pdev->dev, &sun4i_hdmi_ops);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id sun4i_hdmi_of_table[] = {
> +       { .compatible = "allwinner,sun5i-a10s-hdmi" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, sun4i_hdmi_of_table);
> +
> +static struct platform_driver sun4i_hdmi_driver = {
> +       .probe          = sun4i_hdmi_probe,
> +       .remove         = sun4i_hdmi_remove,
> +       .driver         = {
> +               .name           = "sun4i-hdmi",
> +               .of_match_table = sun4i_hdmi_of_table,
> +       },
> +};
> +module_platform_driver(sun4i_hdmi_driver);
> +
> +MODULE_AUTHOR("Maxime Ripard <[e-mail]>");
> +MODULE_DESCRIPTION("Allwinner A10 HDMI Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
> new file mode 100644
> index 000000000000..40f48f1d4685
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
> @@ -0,0 +1,236 @@
> +/*
> + * Copyright (C) 2016 Free Electrons
> + * Copyright (C) 2016 NextThing Co
> + *
> + * Maxime Ripard <[e-mail]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +#include <linux/clk-provider.h>
> +
> +#include "sun4i_tcon.h"
> +#include "sun4i_hdmi.h"
> +
> +struct sun4i_tmds {
> +       struct clk_hw           hw;
> +       struct sun4i_hdmi       *hdmi;
> +};
> +
> +static inline struct sun4i_tmds *hw_to_tmds(struct clk_hw *hw)
> +{
> +       return container_of(hw, struct sun4i_tmds, hw);
> +}
> +
> +
> +static unsigned long sun4i_tmds_calc_divider(unsigned long rate,
> +                                            unsigned long parent_rate,
> +                                            u8 *div,
> +                                            bool *half)
> +{
> +       unsigned long best_rate = 0;
> +       u8 best_m = 0, m;
> +       bool is_double;
> +
> +       for (m = 1; m < 16; m++) {
> +               u8 d;
> +
> +               for (d = 1; d < 3; d++) {
> +                       unsigned long tmp_rate;
> +
> +                       tmp_rate = parent_rate / m / d;
> +
> +                       if (tmp_rate > rate)
> +                               continue;
> +
> +                       if (!best_rate ||
> +                           (rate - tmp_rate) < (rate - best_rate)) {
> +                               best_rate = tmp_rate;
> +                               best_m = m;
> +                               is_double = d;
> +                       }
> +               }
> +       }
> +
> +       if (div && half) {
> +               *div = best_m;
> +               *half = is_double;
> +       }
> +
> +       return best_rate;
> +}
> +
> +
> +static int sun4i_tmds_determine_rate(struct clk_hw *hw,
> +                                    struct clk_rate_request *req)
> +{
> +       struct clk_hw *parent;
> +       unsigned long best_parent = 0;
> +       unsigned long rate = req->rate;
> +       int best_div = 1, best_half = 1;
> +       int i, j;
> +
> +       printk("%s %d rate %lu\n", __func__, __LINE__, rate);

Stray printk?

> +
> +       /*
> +        * We only consider PLL3, since the TCON is very likely to be
> +        * clocked from it, and to have the same rate than our HDMI
> +        * clock, so we should not need to do anything.
> +        */
> +
> +       parent = clk_hw_get_parent_by_index(hw, 0);
> +       if (!parent)
> +               return -EINVAL;
> +
> +       for (i = 1; i < 3; i++) {
> +               for (j = 1; j < 16; j++) {
> +                       unsigned long ideal = rate * i * j;
> +                       unsigned long rounded;
> +
> +                       rounded = clk_hw_round_rate(parent, ideal);
> +
> +                       if (rounded == ideal) {
> +                               best_parent = rounded;
> +                               best_half = i;
> +                               best_div = j;
> +                               goto out;
> +                       }
> +
> +                       if (abs(rate - rounded / i) <
> +                           abs(rate - best_parent / best_div)) {
> +                               best_parent = rounded;
> +                               best_div = i;
> +                       }
> +               }
> +       }
> +
> +out:
> +       req->rate = best_parent / best_half / best_div;
> +       req->best_parent_rate = best_parent;
> +       req->best_parent_hw = parent;
> +
> +       printk("%s %d rate %lu parent rate %lu (%s) div %d half %d\n",
> +              __func__, __LINE__, req->rate, req->best_parent_rate,
> +              clk_hw_get_name(req->best_parent_hw),
> +              best_div, best_half);

Stray printk?

> +
> +       return 0;
> +}
> +
> +static unsigned long sun4i_tmds_recalc_rate(struct clk_hw *hw,
> +                                           unsigned long parent_rate)
> +{
> +       struct sun4i_tmds *tmds = hw_to_tmds(hw);
> +       u32 reg;
> +
> +       reg = readl(tmds->hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
> +       if (reg & SUN4I_HDMI_PAD_CTRL1_HALVE_CLK)
> +               parent_rate /= 2;
> +
> +       reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
> +       reg = (reg >> 4) & 0xf;
> +       if (!reg)
> +               reg = 1;
> +
> +       return parent_rate / reg;
> +}
> +
> +static int sun4i_tmds_set_rate(struct clk_hw *hw, unsigned long rate,
> +                              unsigned long parent_rate)
> +{
> +       struct sun4i_tmds *tmds = hw_to_tmds(hw);
> +       bool half;
> +       u32 reg;
> +       u8 div;
> +
> +       sun4i_tmds_calc_divider(rate, parent_rate, &div, &half);
> +
> +       printk("%s %d rate %lu parent rate %lu div %d half %s\n",
> +              __func__, __LINE__, rate, parent_rate, div,
> +              half ? "yes" : "no");

Stray printk?

> +
> +       reg = readl(tmds->hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
> +       reg &= ~SUN4I_HDMI_PAD_CTRL1_HALVE_CLK;
> +       if (half)
> +               reg |= SUN4I_HDMI_PAD_CTRL1_HALVE_CLK;
> +       writel(reg, tmds->hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
> +
> +       reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
> +       reg &= ~SUN4I_HDMI_PLL_CTRL_DIV_MASK;
> +       writel(reg | SUN4I_HDMI_PLL_CTRL_DIV(div),
> +              tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
> +
> +       return 0;
> +}
> +
> +static u8 sun4i_tmds_get_parent(struct clk_hw *hw)
> +{
> +       struct sun4i_tmds *tmds = hw_to_tmds(hw);
> +       u32 reg;
> +
> +       reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_DBG0_REG);
> +       return ((reg & SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_MASK) >>
> +               SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_SHIFT);
> +}
> +
> +static int sun4i_tmds_set_parent(struct clk_hw *hw, u8 index)
> +{
> +       struct sun4i_tmds *tmds = hw_to_tmds(hw);
> +       u32 reg;
> +
> +       if (index > 1)
> +               return -EINVAL;
> +
> +       reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_DBG0_REG);
> +       reg &= ~SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_MASK;
> +       writel(reg | SUN4I_HDMI_PLL_DBG0_TMDS_PARENT(index),
> +              tmds->hdmi->base + SUN4I_HDMI_PLL_DBG0_REG);
> +
> +       return 0;
> +}
> +
> +static const struct clk_ops sun4i_tmds_ops = {
> +       .determine_rate = sun4i_tmds_determine_rate,
> +       .recalc_rate    = sun4i_tmds_recalc_rate,
> +       .set_rate       = sun4i_tmds_set_rate,
> +
> +       .get_parent     = sun4i_tmds_get_parent,
> +       .set_parent     = sun4i_tmds_set_parent,
> +};
> +
> +int sun4i_tmds_create(struct sun4i_hdmi *hdmi)
> +{
> +       struct clk_init_data init;
> +       struct sun4i_tmds *tmds;
> +       const char *parents[2];
> +
> +       parents[0] = __clk_get_name(hdmi->pll0_clk);
> +       if (!parents[0])
> +               return -ENODEV;
> +
> +       parents[1] = __clk_get_name(hdmi->pll1_clk);
> +       if (!parents[1])
> +               return -ENODEV;
> +
> +       tmds = devm_kzalloc(hdmi->dev, sizeof(*tmds), GFP_KERNEL);
> +       if (!tmds)
> +               return -ENOMEM;
> +
> +       init.name = "hdmi-tmds";
> +       init.ops = &sun4i_tmds_ops;
> +       init.parent_names = parents;
> +       init.num_parents = 2;
> +       init.flags = CLK_SET_RATE_PARENT;
> +
> +       tmds->hdmi = hdmi;
> +       tmds->hw.init = &init;
> +
> +       hdmi->tmds_clk = devm_clk_register(hdmi->dev, &tmds->hw);
> +       if (IS_ERR(hdmi->tmds_clk))
> +               return PTR_ERR(hdmi->tmds_clk);
> +
> +       return 0;
> +}
> --

I also compared the manuals of A20 and A31, and the existing U-boot driver.

So far it looks like the DDC bits are quite different. We could probably
use regfields to work around it, but the DDC clock formula is completely
different. The TMDS clock pre-divider is also different, your usual sun4i
vs sun6i factor offset. Last, the initial values for the 3 PLL related
registers are different.

I'm currently working on an A31 variant for this, basically just copying
the DDC and TMDS bits.

Regards
ChenYu

> git-series 0.8.11
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to [e-mail].
> For more options, visit https://groups.google.com/d/optout.

Maxime Ripard April 26, 2017, 6:50 a.m. UTC | #2

Hi Chen-Yu,

On Fri, Apr 21, 2017 at 11:17:17PM +0800, Chen-Yu Tsai wrote:
> Hi,
> 
> On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard
> <[e-mail]> wrote:
> > The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
> > controller.
> >
> > That HDMI controller is able to do audio and CEC, but those have been left
> > out for now.
> >
> > Signed-off-by: Maxime Ripard <[e-mail]>
> > ---
> >  drivers/gpu/drm/sun4i/Makefile              |   5 +-
> >  drivers/gpu/drm/sun4i/sun4i_hdmi.h          | 124 ++++++-
> >  drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c  | 128 ++++++-
> >  drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c      | 449 +++++++++++++++++++++-
> >  drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c | 236 +++++++++++-
> >  5 files changed, 942 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi.h
> >  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
> >  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> >  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
> 
> Applying patch #9608371 using 'git am'
> Description: [13/15] drm/sun4i: Add HDMI support
> Applying: drm/sun4i: Add HDMI support
> .git/rebase-apply/patch:116: trailing whitespace.
> 
> .git/rebase-apply/patch:531: trailing whitespace.
> 
> .git/rebase-apply/patch:701: trailing whitespace.
> 
> warning: 3 lines add whitespace errors.

Fixed.

> > +int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *parent)
> > +{
> > +       struct clk_init_data init;
> > +       struct sun4i_ddc *ddc;
> > +       const char *parent_name;
> > +
> > +       parent_name = __clk_get_name(parent);
> > +       if (!parent_name)
> > +               return -ENODEV;
> > +
> > +       ddc = devm_kzalloc(hdmi->dev, sizeof(*ddc), GFP_KERNEL);
> > +       if (!ddc)
> > +               return -ENOMEM;
> > +
> > +       init.name = "hdmi-ddc";
> > +       init.ops = &sun4i_ddc_ops;
> > +       init.parent_names = &parent_name;
> > +       init.num_parents = 1;
> > +       init.flags = CLK_SET_RATE_PARENT;
> 
> I don't think this is really needed. It probably doesn't hurt though,
> since DDC is used when HDMI is not used for displaying, but it might
> affect any upstream PLLs, which theoretically may affect other users
> of said PLLs. The DDC clock is slow enough that we should be able to
> generate a usable clock rate anyway.

Good point, I removed it.

> > +       writel(SUN4I_HDMI_VID_TIMING_X(mode->hdisplay) |
> > +              SUN4I_HDMI_VID_TIMING_Y(mode->vdisplay),
> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_ACT_REG);
> > +
> > +       x = mode->htotal - mode->hsync_start;
> > +       y = mode->vtotal - mode->vsync_start;
> 
> I'm a bit skeptical about this one. All the other parameters are not
> inclusive of other, why would this one be different? Shouldn't it
> be "Xtotal - Xsync_end" instead?

By the usual meaning of backporch, you're right. However, Allwinner's
seems to have it's own, which is actually the backporch + sync length.

We also have that on all the other connectors (and TCON), and this was
confirmed at the time using a scope on an RGB signal.

> 
> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_BP_REG);
> > +
> > +       x = mode->hsync_start - mode->hdisplay;
> > +       y = mode->vsync_start - mode->vdisplay;
> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_FP_REG);
> > +
> > +       x = mode->hsync_end - mode->hsync_start;
> > +       y = mode->vsync_end - mode->vsync_start;
> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_SPW_REG);
> > +
> > +       val = SUN4I_HDMI_VID_TIMING_POL_TX_CLK;
> > +       if (mode->flags & DRM_MODE_FLAG_PHSYNC)
> > +               val |= SUN4I_HDMI_VID_TIMING_POL_HSYNC;
> > +
> > +       if (mode->flags & DRM_MODE_FLAG_PVSYNC)
> > +               val |= SUN4I_HDMI_VID_TIMING_POL_VSYNC;
> > +
> > +       writel(val, hdmi->base + SUN4I_HDMI_VID_TIMING_POL_REG);
> 
> You don't handle the interlaced video here, even though you set
> 
>     hdmi->connector.interlace_allowed = true
> 
> later.

I'll fix that.

> The double clock and double scan flags aren't handled either, though
> I don't understand which one is supposed to represent the need for the
> HDMI pixel repeater. AFAIK this is required for resolutions with pixel
> clocks lower than 25 MHz, the lower limit of HDMI's TMDS link.

I'm not sure about this one though. I'd like to keep things quite
simple for now and build up on that once the basis is working. Is it
common in the wild?

> > +              hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
> > +       writel(SUN4I_HDMI_DDC_ADDR_SEGMENT(offset >> 8) |
> > +              SUN4I_HDMI_DDC_ADDR_EDDC(0x60) |
> > +              SUN4I_HDMI_DDC_ADDR_OFFSET(offset) |
> > +              SUN4I_HDMI_DDC_ADDR_SLAVE(0x50),
> 
> You can use DDC_ADDR from drm_edid.h.

Done.

> > +static enum drm_connector_status
> > +sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force)
> > +{
> > +       struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
> > +       unsigned long reg;
> > +
> > +       if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_HPD_REG, reg,
> > +                              reg & SUN4I_HDMI_HPD_HIGH,
> > +                              0, 500000))
> 
> We shouldn't need to do polling here. It should just return the status
> at the instance it's called. Instead we should have a worker that does
> polling to check if something is plugged or unplugged. I don't see any
> interrupt bits for this though. :(

As far as I know, polling in detect is okay. Why would you want to
remove it?

> > +       ret = drm_encoder_init(drm,
> > +                              &hdmi->encoder,
> > +                              &sun4i_hdmi_funcs,
> > +                              DRM_MODE_ENCODER_TMDS,
> > +                              NULL);
> > +       if (ret) {
> > +               dev_err(dev, "Couldn't initialise the HDMI encoder\n");
> > +               return ret;
> > +       }
> > +
> > +       hdmi->encoder.possible_crtcs = BIT(0);
> 
> You can use drm_of_find_possible_crtcs() now. See the TV encoder driver.

Ack.

> > +
> > +       drm_connector_helper_add(&hdmi->connector,
> > +                                &sun4i_hdmi_connector_helper_funcs);
> > +       ret = drm_connector_init(drm, &hdmi->connector,
> > +                                &sun4i_hdmi_connector_funcs,
> > +                                DRM_MODE_CONNECTOR_HDMIA);
> > +       if (ret) {
> > +               dev_err(dev,
> > +                       "Couldn't initialise the Composite connector\n");
> 
> Wrong connector.

Fixed.

> > +       ret = sun4i_ddc_create(hdmi, hdmi->tmds_clk);
> > +       if (ret) {
> > +               dev_err(&pdev->dev, "Couldn't create the DDC clock\n");
> > +               return ret;
> > +       }
> 
> We do all this in the bind function for all the other components.
> Any particular reason to do it differently here?

Not really, I'll change it.

Thanks!
Maxime

Chen-Yu Tsai April 26, 2017, 7:59 a.m. UTC | #3

On Wed, Apr 26, 2017 at 2:50 PM, Maxime Ripard
<[e-mail]> wrote:
> Hi Chen-Yu,
>
> On Fri, Apr 21, 2017 at 11:17:17PM +0800, Chen-Yu Tsai wrote:
>> Hi,
>>
>> On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard
>> <[e-mail]> wrote:
>> > The earlier Allwinner SoCs (A10, A10s, A20, A31) have an embedded HDMI
>> > controller.
>> >
>> > That HDMI controller is able to do audio and CEC, but those have been left
>> > out for now.
>> >
>> > Signed-off-by: Maxime Ripard <[e-mail]>
>> > ---
>> >  drivers/gpu/drm/sun4i/Makefile              |   5 +-
>> >  drivers/gpu/drm/sun4i/sun4i_hdmi.h          | 124 ++++++-
>> >  drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c  | 128 ++++++-
>> >  drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c      | 449 +++++++++++++++++++++-
>> >  drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c | 236 +++++++++++-
>> >  5 files changed, 942 insertions(+), 0 deletions(-)
>> >  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi.h
>> >  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
>> >  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
>> >  create mode 100644 drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
>>
>> Applying patch #9608371 using 'git am'
>> Description: [13/15] drm/sun4i: Add HDMI support
>> Applying: drm/sun4i: Add HDMI support
>> .git/rebase-apply/patch:116: trailing whitespace.
>>
>> .git/rebase-apply/patch:531: trailing whitespace.
>>
>> .git/rebase-apply/patch:701: trailing whitespace.
>>
>> warning: 3 lines add whitespace errors.
>
> Fixed.
>
>> > +int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *parent)
>> > +{
>> > +       struct clk_init_data init;
>> > +       struct sun4i_ddc *ddc;
>> > +       const char *parent_name;
>> > +
>> > +       parent_name = __clk_get_name(parent);
>> > +       if (!parent_name)
>> > +               return -ENODEV;
>> > +
>> > +       ddc = devm_kzalloc(hdmi->dev, sizeof(*ddc), GFP_KERNEL);
>> > +       if (!ddc)
>> > +               return -ENOMEM;
>> > +
>> > +       init.name = "hdmi-ddc";
>> > +       init.ops = &sun4i_ddc_ops;
>> > +       init.parent_names = &parent_name;
>> > +       init.num_parents = 1;
>> > +       init.flags = CLK_SET_RATE_PARENT;
>>
>> I don't think this is really needed. It probably doesn't hurt though,
>> since DDC is used when HDMI is not used for displaying, but it might
>> affect any upstream PLLs, which theoretically may affect other users
>> of said PLLs. The DDC clock is slow enough that we should be able to
>> generate a usable clock rate anyway.
>
> Good point, I removed it.
>
>> > +       writel(SUN4I_HDMI_VID_TIMING_X(mode->hdisplay) |
>> > +              SUN4I_HDMI_VID_TIMING_Y(mode->vdisplay),
>> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_ACT_REG);
>> > +
>> > +       x = mode->htotal - mode->hsync_start;
>> > +       y = mode->vtotal - mode->vsync_start;
>>
>> I'm a bit skeptical about this one. All the other parameters are not
>> inclusive of other, why would this one be different? Shouldn't it
>> be "Xtotal - Xsync_end" instead?
>
> By the usual meaning of backporch, you're right. However, Allwinner's
> seems to have it's own, which is actually the backporch + sync length.
>
> We also have that on all the other connectors (and TCON), and this was
> confirmed at the time using a scope on an RGB signal.

Yes. On the later SoCs such as the A31, the user manual actually has
timing diagrams showing this.

Unlike the TCON, the HDMI controller's timings lists the front porch
separately, instead of an all inclusive Xtotal. This is what made me
look twice. This should be easy to confirm though. Since the HDMI modes
are well known and can be exactly reproduced on our hardware, we can
just check for any distortions or refresh rate errors.

>
>>
>> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
>> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_BP_REG);
>> > +
>> > +       x = mode->hsync_start - mode->hdisplay;
>> > +       y = mode->vsync_start - mode->vdisplay;
>> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
>> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_FP_REG);
>> > +
>> > +       x = mode->hsync_end - mode->hsync_start;
>> > +       y = mode->vsync_end - mode->vsync_start;
>> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
>> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_SPW_REG);
>> > +
>> > +       val = SUN4I_HDMI_VID_TIMING_POL_TX_CLK;
>> > +       if (mode->flags & DRM_MODE_FLAG_PHSYNC)
>> > +               val |= SUN4I_HDMI_VID_TIMING_POL_HSYNC;
>> > +
>> > +       if (mode->flags & DRM_MODE_FLAG_PVSYNC)
>> > +               val |= SUN4I_HDMI_VID_TIMING_POL_VSYNC;
>> > +
>> > +       writel(val, hdmi->base + SUN4I_HDMI_VID_TIMING_POL_REG);
>>
>> You don't handle the interlaced video here, even though you set
>>
>>     hdmi->connector.interlace_allowed = true
>>
>> later.
>
> I'll fix that.
>
>> The double clock and double scan flags aren't handled either, though
>> I don't understand which one is supposed to represent the need for the
>> HDMI pixel repeater. AFAIK this is required for resolutions with pixel
>> clocks lower than 25 MHz, the lower limit of HDMI's TMDS link.
>
> I'm not sure about this one though. I'd like to keep things quite
> simple for now and build up on that once the basis is working. Is it
> common in the wild?

If you drive the display at SDTV resolutions, then yes. Mode lines from
my HDMI monitor:

  720x576i 50 720 732 795 864 576 580 586 625 flags: nhsync, nvsync,
interlace, dblclk; type: driver
  720x480i 60 720 739 801 858 480 488 494 525 flags: nhsync, nvsync,
interlace, dblclk; type: driver
  720x480i 60 720 739 801 858 480 488 494 525 flags: nhsync, nvsync,
interlace, dblclk; type: driver

AFAIK these are standard modes that all devices should support. Whether
they are used daily is another thing. Maybe block modes with dblclk
in .mode_fixup for now?

>> > +              hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
>> > +       writel(SUN4I_HDMI_DDC_ADDR_SEGMENT(offset >> 8) |
>> > +              SUN4I_HDMI_DDC_ADDR_EDDC(0x60) |
>> > +              SUN4I_HDMI_DDC_ADDR_OFFSET(offset) |
>> > +              SUN4I_HDMI_DDC_ADDR_SLAVE(0x50),
>>
>> You can use DDC_ADDR from drm_edid.h.
>
> Done.

There's also DDC_SEGMENT_ADDR (which is 0x30) you can use to replace 0x60.
The 1 bit shift is probably something related to I2C.

>> > +static enum drm_connector_status
>> > +sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force)
>> > +{
>> > +       struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
>> > +       unsigned long reg;
>> > +
>> > +       if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_HPD_REG, reg,
>> > +                              reg & SUN4I_HDMI_HPD_HIGH,
>> > +                              0, 500000))
>>
>> We shouldn't need to do polling here. It should just return the status
>> at the instance it's called. Instead we should have a worker that does
>> polling to check if something is plugged or unplugged. I don't see any
>> interrupt bits for this though. :(
>
> As far as I know, polling in detect is okay. Why would you want to
> remove it?

Hmm, I guess it only serves to debounce the detection, i.e. extend the
time period of validity from the instance the function is run to the
instance plus 500 ms.

To be clear I'm not against it. However this only really works when
the DRM subsystem is brought up. We still need something else for
hotplugging, which is what I was arguing for.


Regards
ChenYu

>> > +       ret = drm_encoder_init(drm,
>> > +                              &hdmi->encoder,
>> > +                              &sun4i_hdmi_funcs,
>> > +                              DRM_MODE_ENCODER_TMDS,
>> > +                              NULL);
>> > +       if (ret) {
>> > +               dev_err(dev, "Couldn't initialise the HDMI encoder\n");
>> > +               return ret;
>> > +       }
>> > +
>> > +       hdmi->encoder.possible_crtcs = BIT(0);
>>
>> You can use drm_of_find_possible_crtcs() now. See the TV encoder driver.
>
> Ack.
>
>> > +
>> > +       drm_connector_helper_add(&hdmi->connector,
>> > +                                &sun4i_hdmi_connector_helper_funcs);
>> > +       ret = drm_connector_init(drm, &hdmi->connector,
>> > +                                &sun4i_hdmi_connector_funcs,
>> > +                                DRM_MODE_CONNECTOR_HDMIA);
>> > +       if (ret) {
>> > +               dev_err(dev,
>> > +                       "Couldn't initialise the Composite connector\n");
>>
>> Wrong connector.
>
> Fixed.
>
>> > +       ret = sun4i_ddc_create(hdmi, hdmi->tmds_clk);
>> > +       if (ret) {
>> > +               dev_err(&pdev->dev, "Couldn't create the DDC clock\n");
>> > +               return ret;
>> > +       }
>>
>> We do all this in the bind function for all the other components.
>> Any particular reason to do it differently here?
>
> Not really, I'll change it.
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

Maxime Ripard May 3, 2017, 8:41 a.m. UTC | #4

On Wed, Apr 26, 2017 at 03:59:28PM +0800, Chen-Yu Tsai wrote:
> >> > +       writel(SUN4I_HDMI_VID_TIMING_X(mode->hdisplay) |
> >> > +              SUN4I_HDMI_VID_TIMING_Y(mode->vdisplay),
> >> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_ACT_REG);
> >> > +
> >> > +       x = mode->htotal - mode->hsync_start;
> >> > +       y = mode->vtotal - mode->vsync_start;
> >>
> >> I'm a bit skeptical about this one. All the other parameters are not
> >> inclusive of other, why would this one be different? Shouldn't it
> >> be "Xtotal - Xsync_end" instead?
> >
> > By the usual meaning of backporch, you're right. However, Allwinner's
> > seems to have it's own, which is actually the backporch + sync length.
> >
> > We also have that on all the other connectors (and TCON), and this was
> > confirmed at the time using a scope on an RGB signal.
> 
> Yes. On the later SoCs such as the A31, the user manual actually has
> timing diagrams showing this.
> 
> Unlike the TCON, the HDMI controller's timings lists the front porch
> separately, instead of an all inclusive Xtotal. This is what made me
> look twice. This should be easy to confirm though. Since the HDMI modes
> are well known and can be exactly reproduced on our hardware, we can
> just check for any distortions or refresh rate errors.

This isn't as trivial as that. Screens usually have some tolerancies
on the timings, which will probably make it go unnoticed, even though
they are wrong.

> >>
> >> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> >> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_BP_REG);
> >> > +
> >> > +       x = mode->hsync_start - mode->hdisplay;
> >> > +       y = mode->vsync_start - mode->vdisplay;
> >> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> >> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_FP_REG);
> >> > +
> >> > +       x = mode->hsync_end - mode->hsync_start;
> >> > +       y = mode->vsync_end - mode->vsync_start;
> >> > +       writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
> >> > +              hdmi->base + SUN4I_HDMI_VID_TIMING_SPW_REG);
> >> > +
> >> > +       val = SUN4I_HDMI_VID_TIMING_POL_TX_CLK;
> >> > +       if (mode->flags & DRM_MODE_FLAG_PHSYNC)
> >> > +               val |= SUN4I_HDMI_VID_TIMING_POL_HSYNC;
> >> > +
> >> > +       if (mode->flags & DRM_MODE_FLAG_PVSYNC)
> >> > +               val |= SUN4I_HDMI_VID_TIMING_POL_VSYNC;
> >> > +
> >> > +       writel(val, hdmi->base + SUN4I_HDMI_VID_TIMING_POL_REG);
> >>
> >> You don't handle the interlaced video here, even though you set
> >>
> >>     hdmi->connector.interlace_allowed = true
> >>
> >> later.
> >
> > I'll fix that.
> >
> >> The double clock and double scan flags aren't handled either, though
> >> I don't understand which one is supposed to represent the need for the
> >> HDMI pixel repeater. AFAIK this is required for resolutions with pixel
> >> clocks lower than 25 MHz, the lower limit of HDMI's TMDS link.
> >
> > I'm not sure about this one though. I'd like to keep things quite
> > simple for now and build up on that once the basis is working. Is it
> > common in the wild?
> 
> If you drive the display at SDTV resolutions, then yes. Mode lines from
> my HDMI monitor:
> 
>   720x576i 50 720 732 795 864 576 580 586 625 flags: nhsync, nvsync,
> interlace, dblclk; type: driver
>   720x480i 60 720 739 801 858 480 488 494 525 flags: nhsync, nvsync,
> interlace, dblclk; type: driver
>   720x480i 60 720 739 801 858 480 488 494 525 flags: nhsync, nvsync,
> interlace, dblclk; type: driver
> 
> AFAIK these are standard modes that all devices should support. Whether
> they are used daily is another thing. Maybe block modes with dblclk
> in .mode_fixup for now?

That would rather be atomic_check and / or mode_valid, but yeah, I can
do that.

Thanks!
Maxime

Patch

diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index 59b757350a1f..68a0f6244a59 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -7,7 +7,12 @@  sun4i-tcon-y += sun4i_dotclock.o
 sun4i-tcon-y += sun4i_crtc.o
 sun4i-tcon-y += sun4i_layer.o
 
+sun4i-drm-hdmi-y += sun4i_hdmi_enc.o
+sun4i-drm-hdmi-y += sun4i_hdmi_ddc_clk.o
+sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
+
 obj-$(CONFIG_DRM_SUN4I)		+= sun4i-drm.o sun4i-tcon.o
 obj-$(CONFIG_DRM_SUN4I)		+= sun4i_backend.o
 obj-$(CONFIG_DRM_SUN4I)		+= sun6i_drc.o
+obj-$(CONFIG_DRM_SUN4I)		+= sun4i-drm-hdmi.o
 obj-$(CONFIG_DRM_SUN4I)		+= sun4i_tv.o
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
new file mode 100644
index 000000000000..2ad25b8fd3cd
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
@@ -0,0 +1,124 @@ 
+/*
+ * Copyright (C) 2016 Maxime Ripard
+ *
+ * Maxime Ripard <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _SUN4I_HDMI_H_
+#define _SUN4I_HDMI_H_
+
+#include <drm/drm_connector.h>
+#include <drm/drm_encoder.h>
+
+#define SUN4I_HDMI_CTRL_REG		0x004
+#define SUN4I_HDMI_CTRL_ENABLE			BIT(31)
+
+#define SUN4I_HDMI_IRQ_REG		0x008
+#define SUN4I_HDMI_IRQ_STA_MASK			0x73
+#define SUN4I_HDMI_IRQ_STA_FIFO_OF		BIT(1)
+#define SUN4I_HDMI_IRQ_STA_FIFO_UF		BIT(0)
+
+#define SUN4I_HDMI_HPD_REG		0x00c
+#define SUN4I_HDMI_HPD_HIGH			BIT(0)
+
+#define SUN4I_HDMI_VID_CTRL_REG		0x010
+#define SUN4I_HDMI_VID_CTRL_ENABLE		BIT(31)
+#define SUN4I_HDMI_VID_CTRL_HDMI_MODE		BIT(30)
+
+#define SUN4I_HDMI_VID_TIMING_ACT_REG	0x014
+#define SUN4I_HDMI_VID_TIMING_BP_REG	0x018
+#define SUN4I_HDMI_VID_TIMING_FP_REG	0x01c
+#define SUN4I_HDMI_VID_TIMING_SPW_REG	0x020
+
+#define SUN4I_HDMI_VID_TIMING_X(x)		((((x) - 1) & GENMASK(11, 0)))
+#define SUN4I_HDMI_VID_TIMING_Y(y)		((((y) - 1) & GENMASK(11, 0)) << 16)
+
+#define SUN4I_HDMI_VID_TIMING_POL_REG	0x024
+#define SUN4I_HDMI_VID_TIMING_POL_TX_CLK        (0x3e0 << 16)
+#define SUN4I_HDMI_VID_TIMING_POL_VSYNC		BIT(1)
+#define SUN4I_HDMI_VID_TIMING_POL_HSYNC		BIT(0)
+
+#define SUN4I_HDMI_AVI_INFOFRAME_REG(n)	(0x080 + (n))
+
+#define SUN4I_HDMI_PAD_CTRL0_REG	0x200
+
+#define SUN4I_HDMI_PAD_CTRL1_REG	0x204
+#define SUN4I_HDMI_PAD_CTRL1_HALVE_CLK		BIT(6)
+
+#define SUN4I_HDMI_PLL_CTRL_REG		0x208
+#define SUN4I_HDMI_PLL_CTRL_DIV(n)		((n) << 4)
+#define SUN4I_HDMI_PLL_CTRL_DIV_MASK		GENMASK(7, 4)
+
+#define SUN4I_HDMI_PLL_DBG0_REG		0x20c
+#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT(n)	(((n) & 1) << 21)
+#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_MASK	BIT(21)
+#define SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_SHIFT	21
+
+#define SUN4I_HDMI_PKT_CTRL_REG(n)	(0x2f0 + (4 * (n)))
+#define SUN4I_HDMI_PKT_CTRL_TYPE(n, t)		((t) << (((n) % 4) * 4))
+
+#define SUN4I_HDMI_UNKNOWN_REG		0x300
+#define SUN4I_HDMI_UNKNOWN_INPUT_SYNC		BIT(27)
+
+#define SUN4I_HDMI_DDC_CTRL_REG		0x500
+#define SUN4I_HDMI_DDC_CTRL_ENABLE		BIT(31)
+#define SUN4I_HDMI_DDC_CTRL_START_CMD		BIT(30)
+#define SUN4I_HDMI_DDC_CTRL_RESET		BIT(0)
+
+#define SUN4I_HDMI_DDC_ADDR_REG		0x504
+#define SUN4I_HDMI_DDC_ADDR_SEGMENT(seg)	(((seg) & 0xff) << 24)
+#define SUN4I_HDMI_DDC_ADDR_EDDC(addr)		(((addr) & 0xff) << 16)
+#define SUN4I_HDMI_DDC_ADDR_OFFSET(off)		(((off) & 0xff) << 8)
+#define SUN4I_HDMI_DDC_ADDR_SLAVE(addr)		((addr) & 0xff)
+
+#define SUN4I_HDMI_DDC_FIFO_CTRL_REG	0x510
+#define SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR		BIT(31)
+	
+#define SUN4I_HDMI_DDC_FIFO_DATA_REG	0x518
+#define SUN4I_HDMI_DDC_BYTE_COUNT_REG	0x51c
+
+#define SUN4I_HDMI_DDC_CMD_REG		0x520
+#define SUN4I_HDMI_DDC_CMD_EXPLICIT_EDDC_READ	6
+
+#define SUN4I_HDMI_DDC_CLK_REG		0x528
+#define SUN4I_HDMI_DDC_CLK_M(m)			(((m) & 0x7) << 3)
+#define SUN4I_HDMI_DDC_CLK_N(n)			((n) & 0x7)
+
+#define SUN4I_HDMI_DDC_LINE_CTRL_REG	0x540
+#define SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE	BIT(9)
+#define SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE	BIT(8)
+
+#define SUN4I_HDMI_DDC_FIFO_SIZE	16
+
+enum sun4i_hdmi_pkt_type {
+	SUN4I_HDMI_PKT_AVI = 2,
+	SUN4I_HDMI_PKT_END = 15,
+};
+
+struct sun4i_hdmi {
+	struct drm_connector	connector;
+	struct drm_encoder	encoder;
+	struct device		*dev;
+
+	void __iomem		*base;
+	struct clk		*bus_clk;
+	struct clk		*ddc_clk;
+	struct clk		*mod_clk;
+	struct clk		*pll0_clk;
+	struct clk		*pll1_clk;
+	struct clk		*tmds_clk;
+
+	struct sun4i_drv	*drv;
+
+	bool			hdmi_monitor;
+};
+
+int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *clk);
+int sun4i_tmds_create(struct sun4i_hdmi *hdmi);
+
+#endif /* _SUN4I_HDMI_H_ */
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
new file mode 100644
index 000000000000..5125b14ea7a5
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c
@@ -0,0 +1,128 @@ 
+/*
+ * Copyright (C) 2016 Free Electrons
+ * Copyright (C) 2016 NextThing Co
+ *
+ * Maxime Ripard <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+
+#include "sun4i_tcon.h"
+#include "sun4i_hdmi.h"
+
+struct sun4i_ddc {
+	struct clk_hw		hw;
+	struct sun4i_hdmi	*hdmi;
+};
+
+static inline struct sun4i_ddc *hw_to_ddc(struct clk_hw *hw)
+{
+	return container_of(hw, struct sun4i_ddc, hw);
+}
+
+static unsigned long sun4i_ddc_calc_divider(unsigned long rate,
+					    unsigned long parent_rate,
+					    u8 *m, u8 *n)
+{
+	unsigned long best_rate = 0;
+	u8 best_m = 0, best_n = 0, _m, _n;
+
+	for (_m = 0; _m < 8; _m++) {
+		for (_n = 0; _n < 8; _n++) {
+			unsigned long tmp_rate;
+
+			tmp_rate = (((parent_rate / 2) / 10) >> _n) / (_m + 1);
+
+			if (tmp_rate > rate)
+				continue;
+
+			if (abs(rate - tmp_rate) < abs(rate - best_rate)) {
+				best_rate = tmp_rate;
+				best_m = _m;
+				best_n = _n;
+			}
+		}
+	}
+
+	if (m && n) {
+		*m = best_m;
+		*n = best_n;
+	}
+
+	return best_rate;
+}
+
+static long sun4i_ddc_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *prate)
+{
+	return sun4i_ddc_calc_divider(rate, *prate, NULL, NULL);
+}
+
+static unsigned long sun4i_ddc_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct sun4i_ddc *ddc = hw_to_ddc(hw);
+	u32 reg;
+	u8 m, n;
+
+	reg = readl(ddc->hdmi->base + SUN4I_HDMI_DDC_CLK_REG);
+	m = (reg >> 3) & 0x7;
+	n = reg & 0x7;
+
+	return (((parent_rate / 2) / 10) >> n) / (m + 1);
+}
+
+static int sun4i_ddc_set_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long parent_rate)
+{
+	struct sun4i_ddc *ddc = hw_to_ddc(hw);
+	u8 div_m, div_n;
+
+	sun4i_ddc_calc_divider(rate, parent_rate, &div_m, &div_n);
+
+	writel(SUN4I_HDMI_DDC_CLK_M(div_m) | SUN4I_HDMI_DDC_CLK_N(div_n),
+	       ddc->hdmi->base + SUN4I_HDMI_DDC_CLK_REG);
+
+	return 0;
+}
+
+static const struct clk_ops sun4i_ddc_ops = {
+	.recalc_rate	= sun4i_ddc_recalc_rate,
+	.round_rate	= sun4i_ddc_round_rate,
+	.set_rate	= sun4i_ddc_set_rate,
+};
+
+int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *parent)
+{
+	struct clk_init_data init;
+	struct sun4i_ddc *ddc;
+	const char *parent_name;
+
+	parent_name = __clk_get_name(parent);
+	if (!parent_name)
+		return -ENODEV;
+
+	ddc = devm_kzalloc(hdmi->dev, sizeof(*ddc), GFP_KERNEL);
+	if (!ddc)
+		return -ENOMEM;
+
+	init.name = "hdmi-ddc";
+	init.ops = &sun4i_ddc_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = CLK_SET_RATE_PARENT;
+
+	ddc->hdmi = hdmi;
+	ddc->hw.init = &init;
+
+	hdmi->ddc_clk = devm_clk_register(hdmi->dev, &ddc->hw);
+	if (IS_ERR(hdmi->ddc_clk))
+		return PTR_ERR(hdmi->ddc_clk);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
new file mode 100644
index 000000000000..33175308c2ed
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -0,0 +1,449 @@ 
+/*
+ * Copyright (C) 2016 Maxime Ripard
+ *
+ * Maxime Ripard <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_panel.h>
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/iopoll.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include "sun4i_backend.h"
+#include "sun4i_drv.h"
+#include "sun4i_hdmi.h"
+#include "sun4i_tcon.h"
+
+static inline struct sun4i_hdmi *
+drm_encoder_to_sun4i_hdmi(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct sun4i_hdmi,
+			    encoder);
+}
+
+static inline struct sun4i_hdmi *
+drm_connector_to_sun4i_hdmi(struct drm_connector *connector)
+{
+	return container_of(connector, struct sun4i_hdmi,
+			    connector);
+}
+
+static int sun4i_hdmi_setup_avi_infoframes(struct sun4i_hdmi *hdmi,
+					   struct drm_display_mode *mode)
+{
+	struct hdmi_avi_infoframe frame;
+	u8 buffer[17];
+	int i, ret;
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
+	if (ret < 0) {
+		DRM_ERROR("Failed to get infoframes from mode\n");
+		return ret;
+	}
+
+	ret = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer));
+	if (ret < 0) {
+		DRM_ERROR("Failed to pack infoframes\n");
+		return ret;
+	}
+
+	for (i = 0; i < sizeof(buffer); i++)
+		writeb(buffer[i], hdmi->base + SUN4I_HDMI_AVI_INFOFRAME_REG(i));
+
+	return 0;
+}
+
+static void sun4i_hdmi_disable(struct drm_encoder *encoder)
+{
+	struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
+	struct sun4i_drv *drv = hdmi->drv;
+	struct sun4i_tcon *tcon = drv->tcon;
+	u32 val;
+
+	DRM_DEBUG_DRIVER("Disabling the HDMI Output\n");
+
+	val = readl(hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
+	val &= ~SUN4I_HDMI_VID_CTRL_ENABLE;
+	writel(val, hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
+
+	sun4i_tcon_channel_disable(tcon, 1);
+}
+
+static void sun4i_hdmi_enable(struct drm_encoder *encoder)
+{
+	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+	struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
+	struct sun4i_drv *drv = hdmi->drv;
+	struct sun4i_tcon *tcon = drv->tcon;
+	u32 val = 0;
+
+	DRM_DEBUG_DRIVER("Enabling the HDMI Output\n");
+
+	sun4i_tcon_channel_enable(tcon, 1);
+
+	sun4i_hdmi_setup_avi_infoframes(hdmi, mode);
+	val |= SUN4I_HDMI_PKT_CTRL_TYPE(0, SUN4I_HDMI_PKT_AVI);
+	val |= SUN4I_HDMI_PKT_CTRL_TYPE(1, SUN4I_HDMI_PKT_END);
+	writel(val, hdmi->base + SUN4I_HDMI_PKT_CTRL_REG(0));
+
+	val = SUN4I_HDMI_VID_CTRL_ENABLE;
+	if (hdmi->hdmi_monitor)
+		val |= SUN4I_HDMI_VID_CTRL_HDMI_MODE;
+
+	writel(val, hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
+}
+
+static void sun4i_hdmi_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct sun4i_hdmi *hdmi = drm_encoder_to_sun4i_hdmi(encoder);
+	struct sun4i_drv *drv = hdmi->drv;
+	struct sun4i_tcon *tcon = drv->tcon;
+	unsigned int x, y;
+	u32 val;
+
+	sun4i_tcon1_mode_set(tcon, encoder, mode);
+	clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000);
+	clk_set_rate(hdmi->tmds_clk, mode->crtc_clock * 1000);
+
+	/* Set input sync enable */
+	writel(SUN4I_HDMI_UNKNOWN_INPUT_SYNC,
+	       hdmi->base + SUN4I_HDMI_UNKNOWN_REG);
+
+	/* Setup timing registers */
+	writel(SUN4I_HDMI_VID_TIMING_X(mode->hdisplay) |
+	       SUN4I_HDMI_VID_TIMING_Y(mode->vdisplay),
+	       hdmi->base + SUN4I_HDMI_VID_TIMING_ACT_REG);
+
+	x = mode->htotal - mode->hsync_start;
+	y = mode->vtotal - mode->vsync_start;
+	writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
+	       hdmi->base + SUN4I_HDMI_VID_TIMING_BP_REG);
+
+	x = mode->hsync_start - mode->hdisplay;
+	y = mode->vsync_start - mode->vdisplay;
+	writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
+	       hdmi->base + SUN4I_HDMI_VID_TIMING_FP_REG);
+
+	x = mode->hsync_end - mode->hsync_start;
+	y = mode->vsync_end - mode->vsync_start;
+	writel(SUN4I_HDMI_VID_TIMING_X(x) | SUN4I_HDMI_VID_TIMING_Y(y),
+	       hdmi->base + SUN4I_HDMI_VID_TIMING_SPW_REG);
+
+	val = SUN4I_HDMI_VID_TIMING_POL_TX_CLK;
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		val |= SUN4I_HDMI_VID_TIMING_POL_HSYNC;
+
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		val |= SUN4I_HDMI_VID_TIMING_POL_VSYNC;
+
+	writel(val, hdmi->base + SUN4I_HDMI_VID_TIMING_POL_REG);
+}
+
+static struct drm_encoder_helper_funcs sun4i_hdmi_helper_funcs = {
+	.disable	= sun4i_hdmi_disable,
+	.enable		= sun4i_hdmi_enable,
+	.mode_set	= sun4i_hdmi_mode_set,
+};
+
+static struct drm_encoder_funcs sun4i_hdmi_funcs = {
+	.destroy	= drm_encoder_cleanup,
+};
+
+static int sun4i_hdmi_read_sub_block(struct sun4i_hdmi *hdmi,
+				     unsigned int blk, unsigned int offset,
+				     u8 *buf, unsigned int count)
+{
+	unsigned long reg;
+	int i;
+
+	reg = readl(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
+	writel(reg | SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR,
+	       hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
+	writel(SUN4I_HDMI_DDC_ADDR_SEGMENT(offset >> 8) |
+	       SUN4I_HDMI_DDC_ADDR_EDDC(0x60) |
+	       SUN4I_HDMI_DDC_ADDR_OFFSET(offset) |
+	       SUN4I_HDMI_DDC_ADDR_SLAVE(0x50),
+	       hdmi->base + SUN4I_HDMI_DDC_ADDR_REG);
+
+	writel(count, hdmi->base + SUN4I_HDMI_DDC_BYTE_COUNT_REG);
+	writel(SUN4I_HDMI_DDC_CMD_EXPLICIT_EDDC_READ,
+	       hdmi->base + SUN4I_HDMI_DDC_CMD_REG);
+
+	reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
+	writel(reg | SUN4I_HDMI_DDC_CTRL_START_CMD,
+	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
+
+	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
+			       !(reg & SUN4I_HDMI_DDC_CTRL_START_CMD),
+			       100, 2000))
+		return -EIO;
+
+	for (i = 0; i < count; i++)
+		buf[i] = readb(hdmi->base + SUN4I_HDMI_DDC_FIFO_DATA_REG);
+
+	return 0;
+}
+
+static int sun4i_hdmi_read_edid_block(void *data, u8 *buf, unsigned int blk,
+				      size_t length)
+{
+	struct sun4i_hdmi *hdmi = data;
+	int retry = 2, i;
+
+	do {
+		for (i = 0; i < length; i += SUN4I_HDMI_DDC_FIFO_SIZE) {
+			unsigned char offset = blk * EDID_LENGTH + i;
+			unsigned int count = min((unsigned int)SUN4I_HDMI_DDC_FIFO_SIZE,
+						 length - i);
+			int ret;
+
+			ret = sun4i_hdmi_read_sub_block(hdmi, blk, offset,
+							buf + i, count);
+			if (ret)
+				return ret;
+		}
+	} while (!drm_edid_block_valid(buf, blk, true, NULL) && (retry--));
+
+	return 0;
+}
+
+static int sun4i_hdmi_get_modes(struct drm_connector *connector)
+{
+	struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
+	unsigned long reg;
+	struct edid *edid;
+	int ret;
+	
+	/* Reset i2c controller */
+	writel(SUN4I_HDMI_DDC_CTRL_ENABLE | SUN4I_HDMI_DDC_CTRL_RESET,
+	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
+	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
+			       !(reg & SUN4I_HDMI_DDC_CTRL_RESET),
+			       100, 2000))
+		return -EIO;
+
+	writel(SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE |
+	       SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE,
+	       hdmi->base + SUN4I_HDMI_DDC_LINE_CTRL_REG);
+
+	clk_set_rate(hdmi->ddc_clk, 100000);
+
+	edid = drm_do_get_edid(connector, sun4i_hdmi_read_edid_block, hdmi);
+	if (!edid)
+		return 0;
+
+	hdmi->hdmi_monitor = drm_detect_hdmi_monitor(edid);
+	DRM_DEBUG_DRIVER("Monitor is %s monitor\n",
+			 hdmi->hdmi_monitor ? "an HDMI" : "a DVI");
+
+	drm_mode_connector_update_edid_property(connector, edid);
+	ret = drm_add_edid_modes(connector, edid);
+	kfree(edid);
+
+	return ret;
+}
+
+static struct drm_connector_helper_funcs sun4i_hdmi_connector_helper_funcs = {
+	.get_modes	= sun4i_hdmi_get_modes,
+};
+
+static enum drm_connector_status
+sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct sun4i_hdmi *hdmi = drm_connector_to_sun4i_hdmi(connector);
+	unsigned long reg;
+
+	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_HPD_REG, reg,
+			       reg & SUN4I_HDMI_HPD_HIGH,
+			       0, 500000))
+		return connector_status_disconnected;
+
+	return connector_status_connected;
+}
+
+static struct drm_connector_funcs sun4i_hdmi_connector_funcs = {
+	.dpms			= drm_atomic_helper_connector_dpms,
+	.detect			= sun4i_hdmi_connector_detect,
+	.fill_modes		= drm_helper_probe_single_connector_modes,
+	.destroy		= drm_connector_cleanup,
+	.reset			= drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+};
+
+static int sun4i_hdmi_bind(struct device *dev, struct device *master,
+			 void *data)
+{
+	struct drm_device *drm = data;
+	struct sun4i_drv *drv = drm->dev_private;
+	struct sun4i_hdmi *hdmi = dev_get_drvdata(dev);
+	int ret;
+
+	hdmi->drv = drv;
+	drm_encoder_helper_add(&hdmi->encoder,
+			       &sun4i_hdmi_helper_funcs);
+	ret = drm_encoder_init(drm,
+			       &hdmi->encoder,
+			       &sun4i_hdmi_funcs,
+			       DRM_MODE_ENCODER_TMDS,
+			       NULL);
+	if (ret) {
+		dev_err(dev, "Couldn't initialise the HDMI encoder\n");
+		return ret;
+	}
+
+	hdmi->encoder.possible_crtcs = BIT(0);
+
+	drm_connector_helper_add(&hdmi->connector,
+				 &sun4i_hdmi_connector_helper_funcs);
+	ret = drm_connector_init(drm, &hdmi->connector,
+				 &sun4i_hdmi_connector_funcs,
+				 DRM_MODE_CONNECTOR_HDMIA);
+	if (ret) {
+		dev_err(dev,
+			"Couldn't initialise the Composite connector\n");
+		goto err_cleanup_connector;
+	}
+	hdmi->connector.interlace_allowed = true;
+
+	drm_mode_connector_attach_encoder(&hdmi->connector, &hdmi->encoder);
+
+	return 0;
+
+err_cleanup_connector:
+	drm_encoder_cleanup(&hdmi->encoder);
+	return ret;
+}
+
+static void sun4i_hdmi_unbind(struct device *dev, struct device *master,
+			    void *data)
+{
+	struct sun4i_hdmi *hdmi = dev_get_drvdata(dev);
+
+	drm_connector_cleanup(&hdmi->connector);
+	drm_encoder_cleanup(&hdmi->encoder);
+}
+
+static struct component_ops sun4i_hdmi_ops = {
+	.bind	= sun4i_hdmi_bind,
+	.unbind	= sun4i_hdmi_unbind,
+};
+
+static int sun4i_hdmi_probe(struct platform_device *pdev)
+{
+	struct sun4i_hdmi *hdmi;
+	struct resource *res;
+	int ret;
+
+	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+	dev_set_drvdata(&pdev->dev, hdmi);
+	hdmi->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hdmi->base)) {
+		dev_err(&pdev->dev, "Couldn't map the HDMI encoder registers\n");
+		return PTR_ERR(hdmi->base);
+	}
+
+	hdmi->bus_clk = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(hdmi->bus_clk)) {
+		dev_err(&pdev->dev, "Couldn't get the HDMI bus clock\n");
+		return PTR_ERR(hdmi->bus_clk);
+	}
+	clk_prepare_enable(hdmi->bus_clk);
+
+	hdmi->mod_clk = devm_clk_get(&pdev->dev, "mod");
+	if (IS_ERR(hdmi->mod_clk)) {
+		dev_err(&pdev->dev, "Couldn't get the HDMI mod clock\n");
+		return PTR_ERR(hdmi->mod_clk);
+	}
+	clk_prepare_enable(hdmi->mod_clk);
+
+	hdmi->pll0_clk = devm_clk_get(&pdev->dev, "pll-0");
+	if (IS_ERR(hdmi->pll0_clk)) {
+		dev_err(&pdev->dev, "Couldn't get the HDMI PLL 0 clock\n");
+		return PTR_ERR(hdmi->pll0_clk);
+	}
+
+	hdmi->pll1_clk = devm_clk_get(&pdev->dev, "pll-1");
+	if (IS_ERR(hdmi->pll1_clk)) {
+		dev_err(&pdev->dev, "Couldn't get the HDMI PLL 1 clock\n");
+		return PTR_ERR(hdmi->pll1_clk);
+	}
+
+	ret = sun4i_tmds_create(hdmi);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't create the TMDS clock\n");
+		return ret;
+	}
+
+	writel(SUN4I_HDMI_CTRL_ENABLE, hdmi->base + SUN4I_HDMI_CTRL_REG);
+
+#define SUN4I_HDMI_PAD_CTRL0 0xfe800000
+	
+	writel(SUN4I_HDMI_PAD_CTRL0, hdmi->base + SUN4I_HDMI_PAD_CTRL0_REG);
+
+	/* TODO: defines */
+	writel((6 << 3) | (2 << 10) | BIT(14) | BIT(15) |
+	       BIT(19) | BIT(20) | BIT(22) | BIT(23),
+	       hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
+
+	/* TODO: defines */
+	writel((8 << 0) | (7 << 8) | (239 << 12) | (7 << 17) | (4 << 20) |
+	       BIT(25) | BIT(27) | BIT(28) | BIT(29) | BIT(30) | BIT(31),
+	       hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
+
+	ret = sun4i_ddc_create(hdmi, hdmi->tmds_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't create the DDC clock\n");
+		return ret;
+	}
+
+	return component_add(&pdev->dev, &sun4i_hdmi_ops);
+}
+
+static int sun4i_hdmi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &sun4i_hdmi_ops);
+
+	return 0;
+}
+
+static const struct of_device_id sun4i_hdmi_of_table[] = {
+	{ .compatible = "allwinner,sun5i-a10s-hdmi" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sun4i_hdmi_of_table);
+
+static struct platform_driver sun4i_hdmi_driver = {
+	.probe		= sun4i_hdmi_probe,
+	.remove		= sun4i_hdmi_remove,
+	.driver		= {
+		.name		= "sun4i-hdmi",
+		.of_match_table	= sun4i_hdmi_of_table,
+	},
+};
+module_platform_driver(sun4i_hdmi_driver);
+
+MODULE_AUTHOR("Maxime Ripard <[e-mail]>");
+MODULE_DESCRIPTION("Allwinner A10 HDMI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
new file mode 100644
index 000000000000..40f48f1d4685
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c
@@ -0,0 +1,236 @@ 
+/*
+ * Copyright (C) 2016 Free Electrons
+ * Copyright (C) 2016 NextThing Co
+ *
+ * Maxime Ripard <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+
+#include "sun4i_tcon.h"
+#include "sun4i_hdmi.h"
+
+struct sun4i_tmds {
+	struct clk_hw		hw;
+	struct sun4i_hdmi	*hdmi;
+};
+
+static inline struct sun4i_tmds *hw_to_tmds(struct clk_hw *hw)
+{
+	return container_of(hw, struct sun4i_tmds, hw);
+}
+
+
+static unsigned long sun4i_tmds_calc_divider(unsigned long rate,
+					     unsigned long parent_rate,
+					     u8 *div,
+					     bool *half)
+{
+	unsigned long best_rate = 0;
+	u8 best_m = 0, m;
+	bool is_double;
+
+	for (m = 1; m < 16; m++) {
+		u8 d;
+
+		for (d = 1; d < 3; d++) {
+			unsigned long tmp_rate;
+
+			tmp_rate = parent_rate / m / d;
+
+			if (tmp_rate > rate)
+				continue;
+
+			if (!best_rate ||
+			    (rate - tmp_rate) < (rate - best_rate)) {
+				best_rate = tmp_rate;
+				best_m = m;
+				is_double = d;
+			}
+		}
+	}
+
+	if (div && half) {
+		*div = best_m;
+		*half = is_double;
+	}
+
+	return best_rate;
+}
+
+
+static int sun4i_tmds_determine_rate(struct clk_hw *hw,
+				     struct clk_rate_request *req)
+{
+	struct clk_hw *parent;
+	unsigned long best_parent = 0;
+	unsigned long rate = req->rate;
+	int best_div = 1, best_half = 1;
+	int i, j;
+
+	printk("%s %d rate %lu\n", __func__, __LINE__, rate);
+
+	/*
+	 * We only consider PLL3, since the TCON is very likely to be
+	 * clocked from it, and to have the same rate than our HDMI
+	 * clock, so we should not need to do anything.
+	 */
+
+	parent = clk_hw_get_parent_by_index(hw, 0);
+	if (!parent)
+		return -EINVAL;
+
+	for (i = 1; i < 3; i++) {
+		for (j = 1; j < 16; j++) {
+			unsigned long ideal = rate * i * j;
+			unsigned long rounded;
+
+			rounded = clk_hw_round_rate(parent, ideal);
+
+			if (rounded == ideal) {
+				best_parent = rounded;
+				best_half = i;
+				best_div = j;
+				goto out;
+			}
+
+			if (abs(rate - rounded / i) <
+			    abs(rate - best_parent / best_div)) {
+				best_parent = rounded;
+				best_div = i;
+			}
+		}
+	}
+
+out:
+	req->rate = best_parent / best_half / best_div;
+	req->best_parent_rate = best_parent;
+	req->best_parent_hw = parent;
+
+	printk("%s %d rate %lu parent rate %lu (%s) div %d half %d\n",
+	       __func__, __LINE__, req->rate, req->best_parent_rate,
+	       clk_hw_get_name(req->best_parent_hw),
+	       best_div, best_half);
+
+	return 0;
+}
+
+static unsigned long sun4i_tmds_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct sun4i_tmds *tmds = hw_to_tmds(hw);
+	u32 reg;
+
+	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
+	if (reg & SUN4I_HDMI_PAD_CTRL1_HALVE_CLK)
+		parent_rate /= 2;
+
+	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
+	reg = (reg >> 4) & 0xf;
+	if (!reg)
+		reg = 1;
+
+	return parent_rate / reg;
+}
+
+static int sun4i_tmds_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct sun4i_tmds *tmds = hw_to_tmds(hw);
+	bool half;
+	u32 reg;
+	u8 div;
+
+	sun4i_tmds_calc_divider(rate, parent_rate, &div, &half);
+
+	printk("%s %d rate %lu parent rate %lu div %d half %s\n",
+	       __func__, __LINE__, rate, parent_rate, div,
+	       half ? "yes" : "no");
+
+	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
+	reg &= ~SUN4I_HDMI_PAD_CTRL1_HALVE_CLK;
+	if (half)
+		reg |= SUN4I_HDMI_PAD_CTRL1_HALVE_CLK;
+	writel(reg, tmds->hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
+
+	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
+	reg &= ~SUN4I_HDMI_PLL_CTRL_DIV_MASK;
+	writel(reg | SUN4I_HDMI_PLL_CTRL_DIV(div),
+	       tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
+
+	return 0;
+}
+
+static u8 sun4i_tmds_get_parent(struct clk_hw *hw)
+{
+	struct sun4i_tmds *tmds = hw_to_tmds(hw);
+	u32 reg;
+
+	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_DBG0_REG);
+	return ((reg & SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_MASK) >>
+		SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_SHIFT);
+}
+
+static int sun4i_tmds_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct sun4i_tmds *tmds = hw_to_tmds(hw);
+	u32 reg;
+
+	if (index > 1)
+		return -EINVAL;
+
+	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_DBG0_REG);
+	reg &= ~SUN4I_HDMI_PLL_DBG0_TMDS_PARENT_MASK;
+	writel(reg | SUN4I_HDMI_PLL_DBG0_TMDS_PARENT(index),
+	       tmds->hdmi->base + SUN4I_HDMI_PLL_DBG0_REG);
+
+	return 0;
+}
+
+static const struct clk_ops sun4i_tmds_ops = {
+	.determine_rate	= sun4i_tmds_determine_rate,
+	.recalc_rate	= sun4i_tmds_recalc_rate,
+	.set_rate	= sun4i_tmds_set_rate,
+
+	.get_parent	= sun4i_tmds_get_parent,
+	.set_parent	= sun4i_tmds_set_parent,
+};
+
+int sun4i_tmds_create(struct sun4i_hdmi *hdmi)
+{
+	struct clk_init_data init;
+	struct sun4i_tmds *tmds;
+	const char *parents[2];
+
+	parents[0] = __clk_get_name(hdmi->pll0_clk);
+	if (!parents[0])
+		return -ENODEV;
+
+	parents[1] = __clk_get_name(hdmi->pll1_clk);
+	if (!parents[1])
+		return -ENODEV;
+
+	tmds = devm_kzalloc(hdmi->dev, sizeof(*tmds), GFP_KERNEL);
+	if (!tmds)
+		return -ENOMEM;
+
+	init.name = "hdmi-tmds";
+	init.ops = &sun4i_tmds_ops;
+	init.parent_names = parents;
+	init.num_parents = 2;
+	init.flags = CLK_SET_RATE_PARENT;
+
+	tmds->hdmi = hdmi;
+	tmds->hw.init = &init;
+
+	hdmi->tmds_clk = devm_clk_register(hdmi->dev, &tmds->hw);
+	if (IS_ERR(hdmi->tmds_clk))
+		return PTR_ERR(hdmi->tmds_clk);
+
+	return 0;
+}