| Message ID | 1493153351-12698-2-git-send-email-jon.mason@broadcom.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hey Jason, On Tue, Apr 25, 2017 at 04:49:10PM -0400, Jon Mason wrote: > Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows > the ns-thermal driver to be selected via menuconfig. Also, change the > ns-thermal driver to work on any iProc based SoC. Finally, tweak the > Kconfig description to mention support for NSP and make the default on > for iProc based platforms. Thanks for the patch, but.. > > Signed-off-by: Jon Mason <jon.mason@broadcom.com> > --- > arch/arm/mach-bcm/Kconfig | 2 ++ > drivers/thermal/broadcom/Kconfig | 9 +++++---- > 2 files changed, 7 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig > index a0e66d8..da2bfeb 100644 > --- a/arch/arm/mach-bcm/Kconfig > +++ b/arch/arm/mach-bcm/Kconfig > @@ -19,6 +19,8 @@ config ARCH_BCM_IPROC > select GPIOLIB > select ARM_AMBA > select PINCTRL > + select THERMAL > + select THERMAL_OF > help > This enables support for systems based on Broadcom IPROC architected SoCs. > The IPROC complex contains one or more ARM CPUs along with common It would be better if this is split and sent through your arch tree, to avoid conflicts. I could also pick it if you get an ack from one of your maintainers. Still, first option is preferable. > diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig > index f0dea8a..26d706c 100644 > --- a/drivers/thermal/broadcom/Kconfig > +++ b/drivers/thermal/broadcom/Kconfig > @@ -1,8 +1,9 @@ > config BCM_NS_THERMAL > tristate "Northstar thermal driver" > depends on ARCH_BCM_IPROC || COMPILE_TEST > + default ARCH_BCM_IPROC Not sure if this is really what you wanted. Based on your commit log message, you meant the following, perhaps? + default y if ARCH_BCM_IPROC > help > - Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, > - BCM4709 and BCM47094. It contains DMU (Device Management Unit) block > - with a thermal sensor that allows checking CPU temperature. This > - driver provides support for it. > + Support for the Northstar and Northstar Plus family of SoCs (e.g. > + BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device Did we look BCM47094 somehow on this patch? > + Management Unit) block with a thermal sensor that allows checking CPU > + temperature. > -- > 2.7.4 >
On Thu, Apr 27, 2017 at 12:37 PM, Eduardo Valentin <edubezval@gmail.com> wrote: > Hey Jason, It's Jon :) > > On Tue, Apr 25, 2017 at 04:49:10PM -0400, Jon Mason wrote: >> Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows >> the ns-thermal driver to be selected via menuconfig. Also, change the >> ns-thermal driver to work on any iProc based SoC. Finally, tweak the >> Kconfig description to mention support for NSP and make the default on >> for iProc based platforms. > > > Thanks for the patch, but.. >> >> Signed-off-by: Jon Mason <jon.mason@broadcom.com> >> --- >> arch/arm/mach-bcm/Kconfig | 2 ++ >> drivers/thermal/broadcom/Kconfig | 9 +++++---- >> 2 files changed, 7 insertions(+), 4 deletions(-) >> >> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig >> index a0e66d8..da2bfeb 100644 >> --- a/arch/arm/mach-bcm/Kconfig >> +++ b/arch/arm/mach-bcm/Kconfig >> @@ -19,6 +19,8 @@ config ARCH_BCM_IPROC >> select GPIOLIB >> select ARM_AMBA >> select PINCTRL >> + select THERMAL >> + select THERMAL_OF >> help >> This enables support for systems based on Broadcom IPROC architected SoCs. >> The IPROC complex contains one or more ARM CPUs along with common > > It would be better if this is split and sent through your arch tree, to > avoid conflicts. I could also pick it if you get an ack from one of your > maintainers. Still, first option is preferable. Sure, I'll be happy to split this off. I should've thought to split it up before sending. Thanks for the suggestion. > >> diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig >> index f0dea8a..26d706c 100644 >> --- a/drivers/thermal/broadcom/Kconfig >> +++ b/drivers/thermal/broadcom/Kconfig >> @@ -1,8 +1,9 @@ >> config BCM_NS_THERMAL >> tristate "Northstar thermal driver" >> depends on ARCH_BCM_IPROC || COMPILE_TEST >> + default ARCH_BCM_IPROC > > Not sure if this is really what you wanted. Based on your commit log > message, you meant the following, perhaps? > > + default y if ARCH_BCM_IPROC IIUC, my original default works, as we have used it frequently in other places in the kernel. grep -rI "default ARCH_BCM_IPROC" * | wc -l 15 However, if the above is preferred (or the other 15 massively broken), I'll be happy to do it that way. >> help >> - Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, >> - BCM4709 and BCM47094. It contains DMU (Device Management Unit) block >> - with a thermal sensor that allows checking CPU temperature. This >> - driver provides support for it. >> + Support for the Northstar and Northstar Plus family of SoCs (e.g. >> + BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device > > Did we look BCM47094 somehow on this patch? Naa, just trying to be more concise, while adding the NSP products to the list.. BCM47094 is a type of BCM4709. So, it is still there :) > >> + Management Unit) block with a thermal sensor that allows checking CPU >> + temperature. >> -- >> 2.7.4 >>
On Thu, Apr 27, 2017 at 01:42:25PM -0400, Jon Mason wrote: > On Thu, Apr 27, 2017 at 12:37 PM, Eduardo Valentin <edubezval@gmail.com> wrote: > > Hey Jason, > > It's Jon :) Apologies. I think I either read too fast, or my fingers were faster than my brain. Sorry. > > > > > On Tue, Apr 25, 2017 at 04:49:10PM -0400, Jon Mason wrote: > >> Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows > >> the ns-thermal driver to be selected via menuconfig. Also, change the > >> ns-thermal driver to work on any iProc based SoC. Finally, tweak the > >> Kconfig description to mention support for NSP and make the default on > >> for iProc based platforms. > > > > > > Thanks for the patch, but.. > >> > >> Signed-off-by: Jon Mason <jon.mason@broadcom.com> > >> --- > >> arch/arm/mach-bcm/Kconfig | 2 ++ > >> drivers/thermal/broadcom/Kconfig | 9 +++++---- > >> 2 files changed, 7 insertions(+), 4 deletions(-) > >> > >> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig > >> index a0e66d8..da2bfeb 100644 > >> --- a/arch/arm/mach-bcm/Kconfig > >> +++ b/arch/arm/mach-bcm/Kconfig > >> @@ -19,6 +19,8 @@ config ARCH_BCM_IPROC > >> select GPIOLIB > >> select ARM_AMBA > >> select PINCTRL > >> + select THERMAL > >> + select THERMAL_OF > >> help > >> This enables support for systems based on Broadcom IPROC architected SoCs. > >> The IPROC complex contains one or more ARM CPUs along with common > > > > It would be better if this is split and sent through your arch tree, to > > avoid conflicts. I could also pick it if you get an ack from one of your > > maintainers. Still, first option is preferable. > > Sure, I'll be happy to split this off. I should've thought to split > it up before sending. Thanks for the suggestion. Cool! > > > > >> diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig > >> index f0dea8a..26d706c 100644 > >> --- a/drivers/thermal/broadcom/Kconfig > >> +++ b/drivers/thermal/broadcom/Kconfig > >> @@ -1,8 +1,9 @@ > >> config BCM_NS_THERMAL > >> tristate "Northstar thermal driver" > >> depends on ARCH_BCM_IPROC || COMPILE_TEST > >> + default ARCH_BCM_IPROC > > > > Not sure if this is really what you wanted. Based on your commit log > > message, you meant the following, perhaps? > > > > + default y if ARCH_BCM_IPROC > > IIUC, my original default works, as we have used it frequently in > other places in the kernel. > grep -rI "default ARCH_BCM_IPROC" * | wc -l > 15 Yeah... Are you sure they are all correct? > > However, if the above is preferred (or the other 15 massively broken), > I'll be happy to do it that way. Your construction is syntactically correct. Maybe might still work (did not check myself) for the purpose you describe, but the construction mentioned in Documentation/kbuild/kconfig-language.txt is: + default y if BAR So, please fix it. > > > >> help > >> - Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, > >> - BCM4709 and BCM47094. It contains DMU (Device Management Unit) block > >> - with a thermal sensor that allows checking CPU temperature. This > >> - driver provides support for it. > >> + Support for the Northstar and Northstar Plus family of SoCs (e.g. > >> + BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device > > > > Did we look BCM47094 somehow on this patch? > > Naa, just trying to be more concise, while adding the NSP products to > the list.. BCM47094 is a type of BCM4709. So, it is still there :) > > > > >> + Management Unit) block with a thermal sensor that allows checking CPU > >> + temperature. > >> -- > >> 2.7.4 > >>
On Fri, Apr 28, 2017 at 9:07 AM, Eduardo Valentin <edubezval@gmail.com> wrote: > On Thu, Apr 27, 2017 at 01:42:25PM -0400, Jon Mason wrote: >> On Thu, Apr 27, 2017 at 12:37 PM, Eduardo Valentin <edubezval@gmail.com> wrote: >> > Hey Jason, >> >> It's Jon :) > > Apologies. I think I either read too fast, or my fingers were faster > than my brain. Sorry. NP, That exact error happens more frequently that you would think :) >> >> > >> > On Tue, Apr 25, 2017 at 04:49:10PM -0400, Jon Mason wrote: >> >> Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows >> >> the ns-thermal driver to be selected via menuconfig. Also, change the >> >> ns-thermal driver to work on any iProc based SoC. Finally, tweak the >> >> Kconfig description to mention support for NSP and make the default on >> >> for iProc based platforms. >> > >> > >> > Thanks for the patch, but.. >> >> >> >> Signed-off-by: Jon Mason <jon.mason@broadcom.com> >> >> --- >> >> arch/arm/mach-bcm/Kconfig | 2 ++ >> >> drivers/thermal/broadcom/Kconfig | 9 +++++---- >> >> 2 files changed, 7 insertions(+), 4 deletions(-) >> >> >> >> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig >> >> index a0e66d8..da2bfeb 100644 >> >> --- a/arch/arm/mach-bcm/Kconfig >> >> +++ b/arch/arm/mach-bcm/Kconfig >> >> @@ -19,6 +19,8 @@ config ARCH_BCM_IPROC >> >> select GPIOLIB >> >> select ARM_AMBA >> >> select PINCTRL >> >> + select THERMAL >> >> + select THERMAL_OF >> >> help >> >> This enables support for systems based on Broadcom IPROC architected SoCs. >> >> The IPROC complex contains one or more ARM CPUs along with common >> > >> > It would be better if this is split and sent through your arch tree, to >> > avoid conflicts. I could also pick it if you get an ack from one of your >> > maintainers. Still, first option is preferable. >> >> Sure, I'll be happy to split this off. I should've thought to split >> it up before sending. Thanks for the suggestion. > > Cool! > >> >> > >> >> diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig >> >> index f0dea8a..26d706c 100644 >> >> --- a/drivers/thermal/broadcom/Kconfig >> >> +++ b/drivers/thermal/broadcom/Kconfig >> >> @@ -1,8 +1,9 @@ >> >> config BCM_NS_THERMAL >> >> tristate "Northstar thermal driver" >> >> depends on ARCH_BCM_IPROC || COMPILE_TEST >> >> + default ARCH_BCM_IPROC >> > >> > Not sure if this is really what you wanted. Based on your commit log >> > message, you meant the following, perhaps? >> > >> > + default y if ARCH_BCM_IPROC >> >> IIUC, my original default works, as we have used it frequently in >> other places in the kernel. >> grep -rI "default ARCH_BCM_IPROC" * | wc -l >> 15 > > Yeah... Are you sure they are all correct? > >> >> However, if the above is preferred (or the other 15 massively broken), >> I'll be happy to do it that way. > > Your construction is syntactically correct. Maybe might still work (did > not check myself) for the purpose you describe, but the construction > mentioned in Documentation/kbuild/kconfig-language.txt is: > + default y if BAR > > So, please fix it. Oh, thanks for the info. I was unaware of this, and we should definitely follow the documentation.. I'll make the relevant changes and do follow-on patches to correct the other places. > >> >> >> >> help >> >> - Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, >> >> - BCM4709 and BCM47094. It contains DMU (Device Management Unit) block >> >> - with a thermal sensor that allows checking CPU temperature. This >> >> - driver provides support for it. >> >> + Support for the Northstar and Northstar Plus family of SoCs (e.g. >> >> + BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device >> > >> > Did we look BCM47094 somehow on this patch? >> >> Naa, just trying to be more concise, while adding the NSP products to >> the list.. BCM47094 is a type of BCM4709. So, it is still there :) >> >> > >> >> + Management Unit) block with a thermal sensor that allows checking CPU >> >> + temperature. >> >> -- >> >> 2.7.4 >> >>
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index a0e66d8..da2bfeb 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -19,6 +19,8 @@ config ARCH_BCM_IPROC select GPIOLIB select ARM_AMBA select PINCTRL + select THERMAL + select THERMAL_OF help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig index f0dea8a..26d706c 100644 --- a/drivers/thermal/broadcom/Kconfig +++ b/drivers/thermal/broadcom/Kconfig @@ -1,8 +1,9 @@ config BCM_NS_THERMAL tristate "Northstar thermal driver" depends on ARCH_BCM_IPROC || COMPILE_TEST + default ARCH_BCM_IPROC help - Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081, - BCM4709 and BCM47094. It contains DMU (Device Management Unit) block - with a thermal sensor that allows checking CPU temperature. This - driver provides support for it. + Support for the Northstar and Northstar Plus family of SoCs (e.g. + BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device + Management Unit) block with a thermal sensor that allows checking CPU + temperature.
Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows the ns-thermal driver to be selected via menuconfig. Also, change the ns-thermal driver to work on any iProc based SoC. Finally, tweak the Kconfig description to mention support for NSP and make the default on for iProc based platforms. Signed-off-by: Jon Mason <jon.mason@broadcom.com> --- arch/arm/mach-bcm/Kconfig | 2 ++ drivers/thermal/broadcom/Kconfig | 9 +++++---- 2 files changed, 7 insertions(+), 4 deletions(-)