| Message ID | CAAd53p57p7nj2AEoUK-wrEETZEsQweVAmhXMGqEM6JbZtbXAZQ@mail.gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, KT Liao, On Thu, May 4, 2017 at 5:47 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote: > Hi Kai-Heng > > -----Original Message----- > From: Kai-Heng Feng [mailto:kai.heng.feng@canonical.com] > Sent: Thursday, May 04, 2017 3:59 PM > To: kt.liao@emc.com.tw; dusonlin@emc.com.tw > Cc: linux-input@vger.kernel.org > Subject: ASUS G752VS Touchpad does not work > > Hi KT Liao, Duson Lin, > > A user reported that the touchpad on ASUS G752VS does not work [1], it's an ELAN touchapd. > > I did the following change, the touchpad correctly loads elan-i2c instead of hid-multitouch, but it's still not working. > > [KT] I check the touchpad of this model, it's MS precision touchpad. > It must use "hid-multitouch", not "elan-i2c". Well, the touchpad does not work under hid-multitouch, either. That's why I tried to let it load elan-i2c instead. What information do you need to investigate this issue? Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Add Endlessm's Chris in loop Hi Chris, Do you know ASUS G752VS's touchpad issue. It's MS PTP, I am not sure if it meet the same problem that interrupt pin configure issue? From your last Acer PTP experience, Your issue seems caused by inconsistent INT setting, right? Could you give some advice to Kai-Heng to check the issue Thanks KT -----Original Message----- From: Kai-Heng Feng [mailto:kai.heng.feng@canonical.com] Sent: Thursday, May 04, 2017 5:54 PM To: 廖崇榮 Cc: linux-input@vger.kernel.org Subject: Re: ASUS G752VS Touchpad does not work Hi, KT Liao, On Thu, May 4, 2017 at 5:47 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote: > Hi Kai-Heng > > -----Original Message----- > From: Kai-Heng Feng [mailto:kai.heng.feng@canonical.com] > Sent: Thursday, May 04, 2017 3:59 PM > To: kt.liao@emc.com.tw; dusonlin@emc.com.tw > Cc: linux-input@vger.kernel.org > Subject: ASUS G752VS Touchpad does not work > > Hi KT Liao, Duson Lin, > > A user reported that the touchpad on ASUS G752VS does not work [1], it's an ELAN touchapd. > > I did the following change, the touchpad correctly loads elan-i2c instead of hid-multitouch, but it's still not working. > > [KT] I check the touchpad of this model, it's MS precision touchpad. > It must use "hid-multitouch", not "elan-i2c". Well, the touchpad does not work under hid-multitouch, either. That's why I tried to let it load elan-i2c instead. What information do you need to investigate this issue? Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi KT,
We user kernel version 4.8 when test the G752VSK but it should
work at 4.10 too. I'll verify that later. And yes, there's no ELAN
interrupt at all from the bug report. I would suggest to have the DSDT
for further analysis.
Chris
On Fri, May 5, 2017 at 12:02 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote:
> Hi Chris,
>
>
>
> Thanks, I remember this issue, it’s HID description issue for touchpad’s
> physical button. And it fixed after Benjamin ’s patch
>
> From below link, it seems the probe is ok, so I still guess interrupt maybe
> the problem
>
> https://bugs.launchpad.net/bugs/1653456
>
>
>
> which kernel version do you use for it?,
>
>
>
> Thanks KT
>
>
>
> From: Chris Chiu [mailto:chiu@endlessm.com]
> Sent: Friday, May 05, 2017 11:45 AM
> To: 廖崇榮
> Cc: Kai-Heng Feng; linux-input@vger.kernel.org; 黃世鵬 經理
>
>
> Subject: Re: ASUS G752VS Touchpad does not work
>
>
>
> Hi KT,
>
> We only encounter Asus G752VSK: Default touchpad left key and right are
> reversed issue. The touchpad works under hid-multitouch except the
> left/right key reversed. I still have G752VS in hand, please let me know if
> you need any.
>
>
>
> Chris
>
>
>
> On Fri, May 5, 2017 at 11:25 AM, 廖崇榮 <kt.liao@emc.com.tw> wrote:
>
> Add Endlessm's Chris in loop
>
> Hi Chris,
>
> Do you know ASUS G752VS's touchpad issue.
> It's MS PTP, I am not sure if it meet the same problem that interrupt pin
> configure issue?
>
> From your last Acer PTP experience, Your issue seems caused by inconsistent
> INT setting, right?
>
> Could you give some advice to Kai-Heng to check the issue
>
> Thanks KT
>
>
>
> -----Original Message-----
> From: Kai-Heng Feng [mailto:kai.heng.feng@canonical.com]
> Sent: Thursday, May 04, 2017 5:54 PM
> To: 廖崇榮
> Cc: linux-input@vger.kernel.org
> Subject: Re: ASUS G752VS Touchpad does not work
>
> Hi, KT Liao,
>
> On Thu, May 4, 2017 at 5:47 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote:
>> Hi Kai-Heng
>>
>> -----Original Message-----
>> From: Kai-Heng Feng [mailto:kai.heng.feng@canonical.com]
>> Sent: Thursday, May 04, 2017 3:59 PM
>> To: kt.liao@emc.com.tw; dusonlin@emc.com.tw
>> Cc: linux-input@vger.kernel.org
>> Subject: ASUS G752VS Touchpad does not work
>>
>> Hi KT Liao, Duson Lin,
>>
>> A user reported that the touchpad on ASUS G752VS does not work [1], it's
>> an ELAN touchapd.
>>
>> I did the following change, the touchpad correctly loads elan-i2c instead
>> of hid-multitouch, but it's still not working.
>>
>> [KT] I check the touchpad of this model, it's MS precision touchpad.
>> It must use "hid-multitouch", not "elan-i2c".
>
> Well, the touchpad does not work under hid-multitouch, either. That's why I
> tried to let it load elan-i2c instead.
> What information do you need to investigate this issue?
>
> Thanks.
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Chris, On Fri, May 5, 2017 at 2:41 PM, Chris Chiu <chiu@endlessm.com> wrote: > Hi KT, > We user kernel version 4.8 when test the G752VSK but it should > work at 4.10 too. I'll verify that later. And yes, there's no ELAN > interrupt at all from the bug report. I would suggest to have the DSDT > for further analysis. These are already two ACPI dumps from users: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456/comments/30 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456/comments/32 Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
I read the whole threads. It's normal there's no interrupt observed if using elan_i2c driver. It should use hid-multitouch. I would like to know if there's any interrupts observed when it load hid-multitouch driver instead of elan_i2c driver. Something noted here, on my G752VSK the input device shows as ELAN1200 not ELAN1203. Although I think it should make no difference, just to note that my machine maybe a little different from the bug reporter's. On Fri, May 5, 2017 at 3:42 PM, Kai-Heng Feng <kai.heng.feng@canonical.com> wrote: > Hi Chris, > > On Fri, May 5, 2017 at 2:41 PM, Chris Chiu <chiu@endlessm.com> wrote: >> Hi KT, >> We user kernel version 4.8 when test the G752VSK but it should >> work at 4.10 too. I'll verify that later. And yes, there's no ELAN >> interrupt at all from the bug report. I would suggest to have the DSDT >> for further analysis. > > These are already two ACPI dumps from users: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456/comments/30 > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456/comments/32 > > Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi aljosa, On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote: > I read the whole threads. It's normal there's no interrupt observed if > using elan_i2c driver. It should use hid-multitouch. > > I would like to know if there's any interrupts observed when it load > hid-multitouch driver instead of elan_i2c driver. > > Something noted here, on my G752VSK the input device shows as ELAN1200 > not ELAN1203. Although I think it should make no difference, just to > note that my machine maybe a little different from the bug reporter's. > Can you provide information Chris asked? His G752 uses a slightly different touchpad so more information is needed. Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Just installed new kernel 4.12-rc2. ELAN touchpad is still completely dead on my ASUS G752VS, now it's not even present in my system settings. Dmesg output and other details attached here (comment #66): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 On 2017-05-08 08:49, Kai-Heng Feng wrote: > Hi aljosa, > > On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote: >> I read the whole threads. It's normal there's no interrupt observed if >> using elan_i2c driver. It should use hid-multitouch. >> >> I would like to know if there's any interrupts observed when it load >> hid-multitouch driver instead of elan_i2c driver. >> >> Something noted here, on my G752VSK the input device shows as ELAN1200 >> not ELAN1203. Although I think it should make no difference, just to >> note that my machine maybe a little different from the bug reporter's. >> > > Can you provide information Chris asked? > His G752 uses a slightly different touchpad so more information is > needed. > > Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello,just installed new kernel 4.12-rc3.
ELAN touchpad is still completely dead on my ASUS G752VS.
Complete dmesg output (comment #68) and complete output (comment #69) of
~$ cat /proc/interrupts attached here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456
~$ dmesg
[5.149761] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not
found, using dummy regulator
[5.191090] hid-multitouch 0018:04F3:3043.0007: Ignoring the extra
HID_DG_INPUTMODE
[5.191133] input: ELAN1203:00 04F3:3043 Touchpad as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203:00/0018:04F3:3043.0007/input/input16
[5.191230] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID
v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00
~$ cat /proc/interrupts
16: 0 0 0 0 0 0
0 0 IR-IO-APIC 16-fasteoi idma64.0, i2c_designware.0
17: 709 9839 0 0 0 0
0 0 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1
95: 1 552 0 0 0 0
0 0 IR-IO-APIC 95-fasteoi ELAN1203:00
~$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ G-SPY USB Gaming Mouse id=11 [slave pointer (2)]
⎜ ↳ Asus Keyboard id=14 [slave pointer (2)]
⎜ ↳ Asus Keyboard id=15 [slave pointer (2)]
⎜ ↳ ELAN1203:00 04F3:3043 Touchpad id=16 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Asus Wireless Radio Control id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ G-SPY USB Gaming Mouse id=10 [slave keyboard (3)]
↳ USB2.0 HD UVC WebCam id=12 [slave keyboard (3)]
↳ Asus Keyboard id=13 [slave keyboard (3)]
↳ Asus WMI hotkeys id=17 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=18 [slave keyboard (3)]
↳ G-SPY USB Gaming Mouse id=19 [slave keyboard (3)]
↳ Asus Keyboard id=20 [slave keyboard (3)]
On 2017-05-08 08:49, Kai-Heng Feng wrote:
> Hi aljosa,
>
> On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote:
>> I read the whole threads. It's normal there's no interrupt observed if
>> using elan_i2c driver. It should use hid-multitouch.
>>
>> I would like to know if there's any interrupts observed when it load
>> hid-multitouch driver instead of elan_i2c driver.
>>
>> Something noted here, on my G752VSK the input device shows as ELAN1200
>> not ELAN1203. Although I think it should make no difference, just to
>> note that my machine maybe a little different from the bug reporter's.
>>
>
> Can you provide information Chris asked?
> His G752 uses a slightly different touchpad so more information is
> needed.
>
> Thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Chris, His Interrupt is fasteoi, I guess it's kind of level trigger. I remember that you debug for an Acer PTP which cause touchpad no function sometimes. And it works fine after interrupt modified to edge trigger. What's your comment? Thanks KT -----Original Message----- From: Aljoša [mailto:aljosa@cromalternativemoney.org] Sent: Monday, May 29, 2017 7:04 PM To: Kai-Heng Feng Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理 Subject: Re: ASUS G752VS Touchpad does not work Hello,just installed new kernel 4.12-rc3. ELAN touchpad is still completely dead on my ASUS G752VS. Complete dmesg output (comment #68) and complete output (comment #69) of ~$ cat /proc/interrupts attached here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 ~$ dmesg [5.149761] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not found, using dummy regulator [5.191090] hid-multitouch 0018:04F3:3043.0007: Ignoring the extra HID_DG_INPUTMODE [5.191133] input: ELAN1203:00 04F3:3043 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203:00/0018:04F3:3043.0007/input/input16 [5.191230] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00 ~$ cat /proc/interrupts 16: 0 0 0 0 0 0 0 0 IR-IO-APIC 16-fasteoi idma64.0, i2c_designware.0 17: 709 9839 0 0 0 0 0 0 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 95: 1 552 0 0 0 0 0 0 IR-IO-APIC 95-fasteoi ELAN1203:00 ~$ xinput list ⎡ Virtual core pointer id=2 [master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ G-SPY USB Gaming Mouse id=11 [slave pointer (2)] ⎜ ↳ Asus Keyboard id=14 [slave pointer (2)] ⎜ ↳ Asus Keyboard id=15 [slave pointer (2)] ⎜ ↳ ELAN1203:00 04F3:3043 Touchpad id=16 [slave pointer (2)] ⎣ Virtual core keyboard id=3 [master keyboard (2)] ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)] ↳ Power Button id=6 [slave keyboard (3)] ↳ Asus Wireless Radio Control id=7 [slave keyboard (3)] ↳ Video Bus id=8 [slave keyboard (3)] ↳ Sleep Button id=9 [slave keyboard (3)] ↳ G-SPY USB Gaming Mouse id=10 [slave keyboard (3)] ↳ USB2.0 HD UVC WebCam id=12 [slave keyboard (3)] ↳ Asus Keyboard id=13 [slave keyboard (3)] ↳ Asus WMI hotkeys id=17 [slave keyboard (3)] ↳ AT Translated Set 2 keyboard id=18 [slave keyboard (3)] ↳ G-SPY USB Gaming Mouse id=19 [slave keyboard (3)] ↳ Asus Keyboard id=20 [slave keyboard (3)] On 2017-05-08 08:49, Kai-Heng Feng wrote: > Hi aljosa, > > On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote: >> I read the whole threads. It's normal there's no interrupt observed >> if using elan_i2c driver. It should use hid-multitouch. >> >> I would like to know if there's any interrupts observed when it load >> hid-multitouch driver instead of elan_i2c driver. >> >> Something noted here, on my G752VSK the input device shows as >> ELAN1200 not ELAN1203. Although I think it should make no difference, >> just to note that my machine maybe a little different from the bug reporter's. >> > > Can you provide information Chris asked? > His G752 uses a slightly different touchpad so more information is > needed. > > Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi KT,
Yes, I've hit the interrupt type setting issues in Acer laptops.
If the interrupt type setting is wrong in the BIOS, the touchpad will
stop working after a while (often ~10 seconds). The interrupt numbers
observed will be a lot more than expected when touchpad is still
working which cause i2c read lots of dummy data, then never increase
when the touchpad stop responding. I believe it's something very
similar. Please do "sudo cat
/sys/kernel/debug/hid/0018:04F3:3043.0007/events" before your touchpad
dead to see if there's still outputs even you never touch the
touchpad. If the data keeps coming, that means the interrupt type
setting should go wrong.
Chris
On Thu, Jun 1, 2017 at 8:22 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote:
> Hi Chris,
>
> His Interrupt is fasteoi, I guess it's kind of level trigger.
>
> I remember that you debug for an Acer PTP which cause touchpad no function sometimes.
> And it works fine after interrupt modified to edge trigger.
>
> What's your comment?
>
> Thanks KT
> -----Original Message-----
> From: Aljoša [mailto:aljosa@cromalternativemoney.org]
> Sent: Monday, May 29, 2017 7:04 PM
> To: Kai-Heng Feng
> Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理
> Subject: Re: ASUS G752VS Touchpad does not work
>
> Hello,just installed new kernel 4.12-rc3.
> ELAN touchpad is still completely dead on my ASUS G752VS.
> Complete dmesg output (comment #68) and complete output (comment #69) of ~$ cat /proc/interrupts attached here:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456
>
> ~$ dmesg
>
> [5.149761] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not found, using dummy regulator [5.191090] hid-multitouch 0018:04F3:3043.0007: Ignoring the extra HID_DG_INPUTMODE [5.191133] input: ELAN1203:00 04F3:3043 Touchpad as
> /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203:00/0018:04F3:3043.0007/input/input16
> [5.191230] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID
> v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00
>
> ~$ cat /proc/interrupts
>
> 16: 0 0 0 0 0 0
> 0 0 IR-IO-APIC 16-fasteoi idma64.0, i2c_designware.0
> 17: 709 9839 0 0 0 0
> 0 0 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1
> 95: 1 552 0 0 0 0
> 0 0 IR-IO-APIC 95-fasteoi ELAN1203:00
>
> ~$ xinput list
> ⎡ Virtual core pointer id=2 [master pointer (3)]
> ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
> ⎜ ↳ G-SPY USB Gaming Mouse id=11 [slave pointer (2)]
> ⎜ ↳ Asus Keyboard id=14 [slave pointer (2)]
> ⎜ ↳ Asus Keyboard id=15 [slave pointer (2)]
> ⎜ ↳ ELAN1203:00 04F3:3043 Touchpad id=16 [slave pointer (2)]
> ⎣ Virtual core keyboard id=3 [master keyboard (2)]
> ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
> ↳ Power Button id=6 [slave keyboard (3)]
> ↳ Asus Wireless Radio Control id=7 [slave keyboard (3)]
> ↳ Video Bus id=8 [slave keyboard (3)]
> ↳ Sleep Button id=9 [slave keyboard (3)]
> ↳ G-SPY USB Gaming Mouse id=10 [slave keyboard (3)]
> ↳ USB2.0 HD UVC WebCam id=12 [slave keyboard (3)]
> ↳ Asus Keyboard id=13 [slave keyboard (3)]
> ↳ Asus WMI hotkeys id=17 [slave keyboard (3)]
> ↳ AT Translated Set 2 keyboard id=18 [slave keyboard (3)]
> ↳ G-SPY USB Gaming Mouse id=19 [slave keyboard (3)]
> ↳ Asus Keyboard id=20 [slave keyboard (3)]
>
>
>
> On 2017-05-08 08:49, Kai-Heng Feng wrote:
>> Hi aljosa,
>>
>> On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote:
>>> I read the whole threads. It's normal there's no interrupt observed
>>> if using elan_i2c driver. It should use hid-multitouch.
>>>
>>> I would like to know if there's any interrupts observed when it load
>>> hid-multitouch driver instead of elan_i2c driver.
>>>
>>> Something noted here, on my G752VSK the input device shows as
>>> ELAN1200 not ELAN1203. Although I think it should make no difference,
>>> just to note that my machine maybe a little different from the bug reporter's.
>>>
>>
>> Can you provide information Chris asked?
>> His G752 uses a slightly different touchpad so more information is
>> needed.
>>
>> Thanks!
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi guys, thank you very much for your time. I'm a little bit confused if touching the touchpad is needed or not in order to generate the correct results, so please find attached: 3_cat_proc_interrupts.txt (without touching the touchpad) 4_cat_proc_interrupts.txt (with touching the touchpad and pressing its buttons) 5_cat_sys_kernel_debug_hid_0018_04F3_3043_0007_events (without touching the touchpad, not sure if I succeeded to execute the command within 10 seconds after power up) 6_cat_sys_kernel_debug_hid_0018_04F3_3043_0007_events (with touching the touchpad and pressing its buttons, not sure if I succeeded to execute the command within 10 seconds after power up) On 2017-06-01 14:58, Chris Chiu wrote: > Hi KT, > Yes, I've hit the interrupt type setting issues in Acer laptops. > If the interrupt type setting is wrong in the BIOS, the touchpad will > stop working after a while (often ~10 seconds). The interrupt numbers > observed will be a lot more than expected when touchpad is still > working which cause i2c read lots of dummy data, then never increase > when the touchpad stop responding. I believe it's something very > similar. Please do "sudo cat > /sys/kernel/debug/hid/0018:04F3:3043.0007/events" before your touchpad > dead to see if there's still outputs even you never touch the > touchpad. If the data keeps coming, that means the interrupt type > setting should go wrong. > > Chris > > On Thu, Jun 1, 2017 at 8:22 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote: >> Hi Chris, >> >> His Interrupt is fasteoi, I guess it's kind of level trigger. >> >> I remember that you debug for an Acer PTP which cause touchpad no >> function sometimes. >> And it works fine after interrupt modified to edge trigger. >> >> What's your comment? >> >> Thanks KT >> -----Original Message----- >> From: Aljoša [mailto:aljosa@cromalternativemoney.org] >> Sent: Monday, May 29, 2017 7:04 PM >> To: Kai-Heng Feng >> Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理 >> Subject: Re: ASUS G752VS Touchpad does not work >> >> Hello,just installed new kernel 4.12-rc3. >> ELAN touchpad is still completely dead on my ASUS G752VS. >> Complete dmesg output (comment #68) and complete output (comment #69) >> of ~$ cat /proc/interrupts attached here: >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 >> >> ~$ dmesg >> >> [5.149761] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not >> found, using dummy regulator [5.191090] hid-multitouch >> 0018:04F3:3043.0007: Ignoring the extra HID_DG_INPUTMODE [5.191133] >> input: ELAN1203:00 04F3:3043 Touchpad as >> /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203:00/0018:04F3:3043.0007/input/input16 >> [5.191230] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID >> v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00 >> >> ~$ cat /proc/interrupts >> >> 16: 0 0 0 0 0 0 >> 0 0 IR-IO-APIC 16-fasteoi idma64.0, >> i2c_designware.0 >> 17: 709 9839 0 0 0 0 >> 0 0 IR-IO-APIC 17-fasteoi idma64.1, >> i2c_designware.1 >> 95: 1 552 0 0 0 0 >> 0 0 IR-IO-APIC 95-fasteoi ELAN1203:00 >> >> ~$ xinput list >> ⎡ Virtual core pointer id=2 [master pointer (3)] >> ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] >> ⎜ ↳ G-SPY USB Gaming Mouse id=11 [slave pointer (2)] >> ⎜ ↳ Asus Keyboard id=14 [slave pointer (2)] >> ⎜ ↳ Asus Keyboard id=15 [slave pointer (2)] >> ⎜ ↳ ELAN1203:00 04F3:3043 Touchpad id=16 [slave pointer (2)] >> ⎣ Virtual core keyboard id=3 [master keyboard (2)] >> ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)] >> ↳ Power Button id=6 [slave keyboard (3)] >> ↳ Asus Wireless Radio Control id=7 [slave keyboard (3)] >> ↳ Video Bus id=8 [slave keyboard (3)] >> ↳ Sleep Button id=9 [slave keyboard (3)] >> ↳ G-SPY USB Gaming Mouse id=10 [slave keyboard (3)] >> ↳ USB2.0 HD UVC WebCam id=12 [slave keyboard (3)] >> ↳ Asus Keyboard id=13 [slave keyboard (3)] >> ↳ Asus WMI hotkeys id=17 [slave keyboard (3)] >> ↳ AT Translated Set 2 keyboard id=18 [slave keyboard (3)] >> ↳ G-SPY USB Gaming Mouse id=19 [slave keyboard (3)] >> ↳ Asus Keyboard id=20 [slave keyboard (3)] >> >> >> >> On 2017-05-08 08:49, Kai-Heng Feng wrote: >>> Hi aljosa, >>> >>> On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote: >>>> I read the whole threads. It's normal there's no interrupt observed >>>> if using elan_i2c driver. It should use hid-multitouch. >>>> >>>> I would like to know if there's any interrupts observed when it load >>>> hid-multitouch driver instead of elan_i2c driver. >>>> >>>> Something noted here, on my G752VSK the input device shows as >>>> ELAN1200 not ELAN1203. Although I think it should make no >>>> difference, >>>> just to note that my machine maybe a little different from the bug >>>> reporter's. >>>> >>> >>> Can you provide information Chris asked? >>> His G752 uses a slightly different touchpad so more information is >>> needed. >>> >>> Thanks! >> ~$ cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 38 0 0 0 0 0 0 0 IR-IO-APIC 2-edge timer 1: 9 0 0 0 0 0 0 0 IR-IO-APIC 1-edge i8042 8: 1 0 0 0 0 0 0 0 IR-IO-APIC 8-edge rtc0 9: 14 0 0 0 0 0 0 0 IR-IO-APIC 9-fasteoi acpi 16: 0 0 0 0 0 0 0 0 IR-IO-APIC 16-fasteoi idma64.0, i2c_designware.0 17: 709 9839 0 0 0 0 0 0 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 95: 1 552 0 0 0 0 0 0 IR-IO-APIC 95-fasteoi ELAN1203:00 120: 0 0 0 0 0 0 0 0 DMAR-MSI 0-edge dmar0 122: 485 0 868 0 64181 0 27974 0 IR-PCI-MSI 327680-edge xhci_hcd 123: 256 0 0 139 79 0 183 0 IR-PCI-MSI 376832-edge ahci[0000:00:17.0] 124: 5734 0 0 0 0 0 0 0 IR-PCI-MSI 31981568-edge nvme0q0, nvme0q1 125: 0 0 0 0 0 0 0 0 IR-PCI-MSI 1572864-edge enp3s0 126: 0 5596 0 0 0 0 0 0 IR-PCI-MSI 31981569-edge nvme0q2 127: 0 0 4320 0 0 0 0 0 IR-PCI-MSI 31981570-edge nvme0q3 128: 0 0 0 5251 0 0 0 0 IR-PCI-MSI 31981571-edge nvme0q4 129: 0 0 0 0 5566 0 0 0 IR-PCI-MSI 31981572-edge nvme0q5 130: 0 0 0 0 0 4031 0 0 IR-PCI-MSI 31981573-edge nvme0q6 131: 0 0 0 0 0 0 6094 0 IR-PCI-MSI 31981574-edge nvme0q7 132: 0 0 0 0 0 0 0 4398 IR-PCI-MSI 31981575-edge nvme0q8 133: 34 0 0 0 0 0 0 0 IR-PCI-MSI 360448-edge mei_me 134: 503 0 0 17875 0 196 0 0 IR-PCI-MSI 1048576-edge iwlwifi 135: 174 0 0 0 0 0 0 66947 IR-PCI-MSI 524288-edge nvidia 136: 801 0 0 0 0 0 0 0 IR-PCI-MSI 514048-edge snd_hda_intel:card0 NMI: 2 2 2 2 2 2 2 2 Non-maskable interrupts LOC: 43707 46136 48495 45824 55532 46034 43460 29074 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 2 2 2 2 2 2 2 2 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RTR: 7 0 0 0 0 0 0 0 APIC ICR read retries RES: 9736 4315 2225 1793 1803 1346 1222 2021 Rescheduling interrupts CAL: 9465 9039 8368 8310 8391 8373 8326 8214 Function call interrupts TLB: 5555 5616 4948 4823 5020 4987 5280 4590 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts DFR: 0 0 0 0 0 0 0 0 Deferred Error APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 4 4 4 4 4 4 4 4 Machine check polls ERR: 28 MIS: 0 PIN: 0 0 0 0 0 0 0 0 Posted-interrupt notification event PIW: 0 0 0 0 0 0 0 0 Posted-interrupt wakeup event ~$ cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 37 0 0 0 0 0 0 0 IR-IO-APIC 2-edge timer 1: 9 0 0 0 0 0 0 0 IR-IO-APIC 1-edge i8042 8: 1 0 0 0 0 0 0 0 IR-IO-APIC 8-edge rtc0 9: 14 0 0 0 0 0 0 0 IR-IO-APIC 9-fasteoi acpi 16: 0 0 0 0 0 0 0 0 IR-IO-APIC 16-fasteoi idma64.0, i2c_designware.0 17: 711 23470 0 0 0 0 0 0 IR-IO-APIC 17-fasteoi idma64.1, i2c_designware.1 95: 1 1310 0 0 0 0 0 0 IR-IO-APIC 95-fasteoi ELAN1203:00 120: 0 0 0 0 0 0 0 0 DMAR-MSI 0-edge dmar0 122: 591 0 131 0 0 0 5537 0 IR-PCI-MSI 327680-edge xhci_hcd 123: 258 0 0 43 0 0 0 0 IR-PCI-MSI 376832-edge ahci[0000:00:17.0] 124: 2132 0 0 0 0 0 0 0 IR-PCI-MSI 31981568-edge nvme0q0, nvme0q1 125: 0 0 0 0 0 0 0 0 IR-PCI-MSI 1572864-edge enp3s0 126: 0 2481 0 0 0 0 0 0 IR-PCI-MSI 31981569-edge nvme0q2 127: 0 0 2876 0 0 0 0 0 IR-PCI-MSI 31981570-edge nvme0q3 128: 0 0 0 2615 0 0 0 0 IR-PCI-MSI 31981571-edge nvme0q4 129: 0 0 0 0 1948 0 0 0 IR-PCI-MSI 31981572-edge nvme0q5 130: 0 0 0 0 0 4029 0 0 IR-PCI-MSI 31981573-edge nvme0q6 131: 0 0 0 0 0 0 2562 0 IR-PCI-MSI 31981574-edge nvme0q7 132: 0 0 0 0 0 0 0 4018 IR-PCI-MSI 31981575-edge nvme0q8 133: 33 0 0 0 0 0 0 0 IR-PCI-MSI 360448-edge mei_me 134: 503 0 0 0 0 247 0 0 IR-PCI-MSI 1048576-edge iwlwifi 135: 244 0 0 0 0 0 0 3088 IR-PCI-MSI 524288-edge nvidia 136: 804 0 0 0 0 0 0 0 IR-PCI-MSI 514048-edge snd_hda_intel:card0 NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts LOC: 4078 5889 5077 4255 5417 3959 3540 3352 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RTR: 7 0 0 0 0 0 0 0 APIC ICR read retries RES: 841 546 470 414 417 488 557 378 Rescheduling interrupts CAL: 3051 3135 3075 3087 3028 3174 2837 2737 Function call interrupts TLB: 120 264 251 147 179 205 163 194 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts DFR: 0 0 0 0 0 0 0 0 Deferred Error APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 2 2 2 2 2 2 2 2 Machine check polls ERR: 27 MIS: 0 PIN: 0 0 0 0 0 0 0 0 Posted-interrupt notification event PIW: 0 0 0 0 0 0 0 0 Posted-interrupt wakeup event ~$ sudo cat /sys/kernel/debug/hid/0018:04F3:3043.0007/events [sudo] password for blablabla: ~$ sudo cat /sys/kernel/debug/hid/0018:04F3:3043.0007/events [sudo] password for blablabla: report (size 9) (numbered) = 01 00 f9 05 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -7 GenericDesktop.Y = 5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 00 00 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 3b ed 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 59 GenericDesktop.Y = -19 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 2f ef 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 47 GenericDesktop.Y = -17 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 2a ef 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 42 GenericDesktop.Y = -17 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 25 ef 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 37 GenericDesktop.Y = -17 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 24 ef 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 36 GenericDesktop.Y = -17 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 21 ef 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 33 GenericDesktop.Y = -17 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 1d f0 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 29 GenericDesktop.Y = -16 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 1a f1 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 26 GenericDesktop.Y = -15 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 14 f1 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 20 GenericDesktop.Y = -15 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 11 f5 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 17 GenericDesktop.Y = -11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 0b f6 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 11 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 09 f8 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 9 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 06 fa 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 6 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 02 fc 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 01 fd 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 1 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 00 ff 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 ff 00 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = -1 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 f9 00 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = -7 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 ec 03 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = -20 GenericDesktop.Y = 3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 f2 03 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = -14 GenericDesktop.Y = 3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f5 08 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -11 GenericDesktop.Y = 8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fa 03 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -6 GenericDesktop.Y = 3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fc 05 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -4 GenericDesktop.Y = 5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fc 03 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -4 GenericDesktop.Y = 3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 03 01 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 3 GenericDesktop.Y = 1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 08 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 8 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0d fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 13 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 1a fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 26 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 2a f2 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 42 GenericDesktop.Y = -14 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 31 ee 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 49 GenericDesktop.Y = -18 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 2f ef 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 47 GenericDesktop.Y = -17 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 30 ea 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 48 GenericDesktop.Y = -22 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 2e eb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 46 GenericDesktop.Y = -21 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 29 eb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 41 GenericDesktop.Y = -21 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 2a ea 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 42 GenericDesktop.Y = -22 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 25 ec 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 37 GenericDesktop.Y = -20 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 22 ec 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 34 GenericDesktop.Y = -20 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 1e f0 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 30 GenericDesktop.Y = -16 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 1a f0 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 26 GenericDesktop.Y = -16 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 16 f3 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 22 GenericDesktop.Y = -13 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 10 f6 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 16 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0e fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 14 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 06 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 6 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 06 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 6 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 08 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 8 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 06 01 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 6 GenericDesktop.Y = 1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 00 00 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 02 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 1 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 02 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 1 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 02 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 1 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 02 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 1 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 00 00 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 00 00 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f9 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -7 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fd ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -3 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ff fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -1 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fe 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -2 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fe ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -2 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fa 01 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -6 GenericDesktop.Y = 1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f9 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -7 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f7 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -9 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f4 05 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -12 GenericDesktop.Y = 5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ef 07 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -17 GenericDesktop.Y = 7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 e9 0b 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -23 GenericDesktop.Y = 11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 e9 0b 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -23 GenericDesktop.Y = 11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 e8 0d 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -24 GenericDesktop.Y = 13 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 e8 12 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -24 GenericDesktop.Y = 18 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 e6 15 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -26 GenericDesktop.Y = 21 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ec 10 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -20 GenericDesktop.Y = 16 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f0 0f 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -16 GenericDesktop.Y = 15 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f2 11 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -14 GenericDesktop.Y = 17 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f3 10 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -13 GenericDesktop.Y = 16 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f6 0e 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -10 GenericDesktop.Y = 14 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f6 0e 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -10 GenericDesktop.Y = 14 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fa 0d 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -6 GenericDesktop.Y = 13 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fb 0d 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -5 GenericDesktop.Y = 13 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ff 0c 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -1 GenericDesktop.Y = 12 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 0c 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 12 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 0c 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = 12 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 0b 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = 11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 07 0a 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 7 GenericDesktop.Y = 10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a 0b 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = 11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0d 0d 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 13 GenericDesktop.Y = 13 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0f 0a 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 15 GenericDesktop.Y = 10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 12 08 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 18 GenericDesktop.Y = 8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 13 08 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 19 GenericDesktop.Y = 8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 12 03 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 18 GenericDesktop.Y = 3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 1a 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 26 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 17 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 23 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 13 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 19 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 1a fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 26 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 15 fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 21 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 13 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 19 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 16 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 22 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 12 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 18 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0f f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 15 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0e f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 14 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 09 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 9 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 08 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 8 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 06 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 6 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 04 f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 4 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 03 f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 3 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 01 fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 1 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f9 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -7 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f9 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -7 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f6 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -10 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f8 04 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -8 GenericDesktop.Y = 4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ef 0b 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -17 GenericDesktop.Y = 11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ed 0b 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -19 GenericDesktop.Y = 11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ee 0b 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -18 GenericDesktop.Y = 11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ec 0c 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -20 GenericDesktop.Y = 12 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f0 0c 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -16 GenericDesktop.Y = 12 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f5 0a 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -11 GenericDesktop.Y = 10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f7 07 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -9 GenericDesktop.Y = 7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fa 09 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -6 GenericDesktop.Y = 9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fe 07 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -2 GenericDesktop.Y = 7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ff 08 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -1 GenericDesktop.Y = 8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 09 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 08 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = 8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 06 08 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 6 GenericDesktop.Y = 8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a 06 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = 6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0d 04 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 13 GenericDesktop.Y = 4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0e 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 14 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0e 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 14 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 12 01 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 18 GenericDesktop.Y = 1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 11 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 17 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 12 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 18 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 11 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 17 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 14 fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 20 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 17 fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 23 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 16 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 22 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 15 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 21 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 13 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 19 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 13 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 19 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 16 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 22 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 14 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 20 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 13 f6 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 19 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 11 f5 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 17 GenericDesktop.Y = -11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 10 f6 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 16 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 10 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 16 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0b f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 11 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0d f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 13 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 09 f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 9 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 07 fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 7 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 01 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 1 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 03 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 3 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 03 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 3 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 03 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 3 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 06 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 6 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 08 fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 8 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0b fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 11 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0d f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 13 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 10 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 16 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 17 f6 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 23 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 16 f5 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 22 GenericDesktop.Y = -11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 17 f3 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 23 GenericDesktop.Y = -13 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 14 f5 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 20 GenericDesktop.Y = -11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 13 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 19 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 12 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 18 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 11 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 17 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 11 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 17 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0f f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 15 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0f fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 15 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 10 f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 16 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0d f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 13 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0c fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 12 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 08 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 8 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 09 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 9 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 07 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 7 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 04 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 4 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 01 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 1 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 07 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 7 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 08 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 8 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 09 fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 9 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0b f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 11 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 10 f6 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 16 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 17 f5 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 23 GenericDesktop.Y = -11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 18 f2 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 24 GenericDesktop.Y = -14 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 17 f6 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 23 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 15 f6 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 21 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 16 f6 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 22 GenericDesktop.Y = -10 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 15 f4 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 21 GenericDesktop.Y = -12 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 15 f5 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 21 GenericDesktop.Y = -11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 00 00 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 02 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 1 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 02 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 1 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 02 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 1 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 01 00 00 00 00 00 00 00 Button.0001 = 1 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 07 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 7 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 03 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 3 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 06 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 6 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 07 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 7 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 09 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 9 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 09 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 9 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0d fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 13 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0e fa 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 14 GenericDesktop.Y = -6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0f f8 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 15 GenericDesktop.Y = -8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0c f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 12 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 07 fb 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 7 GenericDesktop.Y = -5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 01 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 1 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 00 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 0 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fe 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -2 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fb 04 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -5 GenericDesktop.Y = 4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f7 05 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -9 GenericDesktop.Y = 5 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fa 06 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -6 GenericDesktop.Y = 6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f6 08 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -10 GenericDesktop.Y = 8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f1 08 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -15 GenericDesktop.Y = 8 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 ee 0b 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -18 GenericDesktop.Y = 11 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f0 09 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -16 GenericDesktop.Y = 9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f4 06 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -12 GenericDesktop.Y = 6 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f8 04 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -8 GenericDesktop.Y = 4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 f9 04 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -7 GenericDesktop.Y = 4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fc 01 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -4 GenericDesktop.Y = 1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fc 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -4 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fe 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -2 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 01 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 1 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 04 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 4 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 07 fd 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 7 GenericDesktop.Y = -3 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 09 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 9 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0d f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 13 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 10 f7 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 16 GenericDesktop.Y = -9 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 10 f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 16 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0f f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 15 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0e f9 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 14 GenericDesktop.Y = -7 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 0a fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 10 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 08 fc 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 8 GenericDesktop.Y = -4 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 05 fe 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 5 GenericDesktop.Y = -2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 02 ff 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 2 GenericDesktop.Y = -1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 01 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 1 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 01 00 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = 1 GenericDesktop.Y = 0 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fe 01 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -2 GenericDesktop.Y = 1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fd 02 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -3 GenericDesktop.Y = 2 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0 report (size 9) (numbered) = 01 00 fd 01 00 00 00 00 00 Button.0001 = 0 Button.0002 = 0 GenericDesktop.X = -3 GenericDesktop.Y = 1 GenericDesktop.Wheel = 0 Consumer.HorizontalWheel = 0
Just installed new kernel 4.12-rc4, my ELAN touchpad still doesn't work. Please find attached the dmesg output here (comment #72): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 On 2017-06-01 14:58, Chris Chiu wrote: > Hi KT, > Yes, I've hit the interrupt type setting issues in Acer laptops. > If the interrupt type setting is wrong in the BIOS, the touchpad will > stop working after a while (often ~10 seconds). The interrupt numbers > observed will be a lot more than expected when touchpad is still > working which cause i2c read lots of dummy data, then never increase > when the touchpad stop responding. I believe it's something very > similar. Please do "sudo cat > /sys/kernel/debug/hid/0018:04F3:3043.0007/events" before your touchpad > dead to see if there's still outputs even you never touch the > touchpad. If the data keeps coming, that means the interrupt type > setting should go wrong. > > Chris > > On Thu, Jun 1, 2017 at 8:22 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote: >> Hi Chris, >> >> His Interrupt is fasteoi, I guess it's kind of level trigger. >> >> I remember that you debug for an Acer PTP which cause touchpad no >> function sometimes. >> And it works fine after interrupt modified to edge trigger. >> >> What's your comment? >> >> Thanks KT >> -----Original Message----- >> From: Aljoša [mailto:aljosa@cromalternativemoney.org] >> Sent: Monday, May 29, 2017 7:04 PM >> To: Kai-Heng Feng >> Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理 >> Subject: Re: ASUS G752VS Touchpad does not work >> >> Hello,just installed new kernel 4.12-rc3. >> ELAN touchpad is still completely dead on my ASUS G752VS. >> Complete dmesg output (comment #68) and complete output (comment #69) >> of ~$ cat /proc/interrupts attached here: >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 >> >> ~$ dmesg >> >> [5.149761] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not >> found, using dummy regulator [5.191090] hid-multitouch >> 0018:04F3:3043.0007: Ignoring the extra HID_DG_INPUTMODE [5.191133] >> input: ELAN1203:00 04F3:3043 Touchpad as >> /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203:00/0018:04F3:3043.0007/input/input16 >> [5.191230] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID >> v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00 >> >> ~$ cat /proc/interrupts >> >> 16: 0 0 0 0 0 0 >> 0 0 IR-IO-APIC 16-fasteoi idma64.0, >> i2c_designware.0 >> 17: 709 9839 0 0 0 0 >> 0 0 IR-IO-APIC 17-fasteoi idma64.1, >> i2c_designware.1 >> 95: 1 552 0 0 0 0 >> 0 0 IR-IO-APIC 95-fasteoi ELAN1203:00 >> >> ~$ xinput list >> ⎡ Virtual core pointer id=2 [master pointer (3)] >> ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] >> ⎜ ↳ G-SPY USB Gaming Mouse id=11 [slave pointer (2)] >> ⎜ ↳ Asus Keyboard id=14 [slave pointer (2)] >> ⎜ ↳ Asus Keyboard id=15 [slave pointer (2)] >> ⎜ ↳ ELAN1203:00 04F3:3043 Touchpad id=16 [slave pointer (2)] >> ⎣ Virtual core keyboard id=3 [master keyboard (2)] >> ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)] >> ↳ Power Button id=6 [slave keyboard (3)] >> ↳ Asus Wireless Radio Control id=7 [slave keyboard (3)] >> ↳ Video Bus id=8 [slave keyboard (3)] >> ↳ Sleep Button id=9 [slave keyboard (3)] >> ↳ G-SPY USB Gaming Mouse id=10 [slave keyboard (3)] >> ↳ USB2.0 HD UVC WebCam id=12 [slave keyboard (3)] >> ↳ Asus Keyboard id=13 [slave keyboard (3)] >> ↳ Asus WMI hotkeys id=17 [slave keyboard (3)] >> ↳ AT Translated Set 2 keyboard id=18 [slave keyboard (3)] >> ↳ G-SPY USB Gaming Mouse id=19 [slave keyboard (3)] >> ↳ Asus Keyboard id=20 [slave keyboard (3)] >> >> >> >> On 2017-05-08 08:49, Kai-Heng Feng wrote: >>> Hi aljosa, >>> >>> On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote: >>>> I read the whole threads. It's normal there's no interrupt observed >>>> if using elan_i2c driver. It should use hid-multitouch. >>>> >>>> I would like to know if there's any interrupts observed when it load >>>> hid-multitouch driver instead of elan_i2c driver. >>>> >>>> Something noted here, on my G752VSK the input device shows as >>>> ELAN1200 not ELAN1203. Although I think it should make no >>>> difference, >>>> just to note that my machine maybe a little different from the bug >>>> reporter's. >>>> >>> >>> Can you provide information Chris asked? >>> His G752 uses a slightly different touchpad so more information is >>> needed. >>> >>> Thanks! >> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Chris, From Aljosa's log, I am not sure if it's the interrupt setting. It seems that no event occur while finger off. If your G752VS's setting is falling edge. Maybe you tell Aljosa how to change interrupt type for testing. B.R KT -----Original Message----- From: Aljoša [mailto:aljosa@cromalternativemoney.org] Sent: Monday, June 05, 2017 6:40 PM To: Chris Chiu Cc: 廖崇榮; Kai-Heng Feng; linux-input@vger.kernel.org; 黃世鵬 經理 Subject: Re: ASUS G752VS Touchpad does not work Just installed new kernel 4.12-rc4, my ELAN touchpad still doesn't work. Please find attached the dmesg output here (comment #72): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 On 2017-06-01 14:58, Chris Chiu wrote: > Hi KT, > Yes, I've hit the interrupt type setting issues in Acer laptops. > If the interrupt type setting is wrong in the BIOS, the touchpad will > stop working after a while (often ~10 seconds). The interrupt numbers > observed will be a lot more than expected when touchpad is still > working which cause i2c read lots of dummy data, then never increase > when the touchpad stop responding. I believe it's something very > similar. Please do "sudo cat > /sys/kernel/debug/hid/0018:04F3:3043.0007/events" before your touchpad > dead to see if there's still outputs even you never touch the > touchpad. If the data keeps coming, that means the interrupt type > setting should go wrong. > > Chris > > On Thu, Jun 1, 2017 at 8:22 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote: >> Hi Chris, >> >> His Interrupt is fasteoi, I guess it's kind of level trigger. >> >> I remember that you debug for an Acer PTP which cause touchpad no >> function sometimes. >> And it works fine after interrupt modified to edge trigger. >> >> What's your comment? >> >> Thanks KT >> -----Original Message----- >> From: Aljoša [mailto:aljosa@cromalternativemoney.org] >> Sent: Monday, May 29, 2017 7:04 PM >> To: Kai-Heng Feng >> Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理 >> Subject: Re: ASUS G752VS Touchpad does not work >> >> Hello,just installed new kernel 4.12-rc3. >> ELAN touchpad is still completely dead on my ASUS G752VS. >> Complete dmesg output (comment #68) and complete output (comment #69) >> of ~$ cat /proc/interrupts attached here: >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 >> >> ~$ dmesg >> >> [5.149761] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not >> found, using dummy regulator [5.191090] hid-multitouch >> 0018:04F3:3043.0007: Ignoring the extra HID_DG_INPUTMODE [5.191133] >> input: ELAN1203:00 04F3:3043 Touchpad as >> /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203: >> 00/0018:04F3:3043.0007/input/input16 >> [5.191230] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID >> v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00 >> >> ~$ cat /proc/interrupts >> >> 16: 0 0 0 0 0 0 >> 0 0 IR-IO-APIC 16-fasteoi idma64.0, >> i2c_designware.0 >> 17: 709 9839 0 0 0 0 >> 0 0 IR-IO-APIC 17-fasteoi idma64.1, >> i2c_designware.1 >> 95: 1 552 0 0 0 0 >> 0 0 IR-IO-APIC 95-fasteoi ELAN1203:00 >> >> ~$ xinput list >> ⎡ Virtual core pointer id=2 [master pointer (3)] >> ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] >> ⎜ ↳ G-SPY USB Gaming Mouse id=11 [slave pointer (2)] >> ⎜ ↳ Asus Keyboard id=14 [slave pointer (2)] ⎜ ↳ Asus Keyboard id=15 >> [slave pointer (2)] >> ⎜ ↳ ELAN1203:00 04F3:3043 Touchpad id=16 [slave pointer (2)] >> ⎣ Virtual core keyboard id=3 [master keyboard (2)] >> ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)] >> ↳ Power Button id=6 [slave keyboard (3)] >> ↳ Asus Wireless Radio Control id=7 [slave keyboard (3)] >> ↳ Video Bus id=8 [slave keyboard (3)] >> ↳ Sleep Button id=9 [slave keyboard (3)] >> ↳ G-SPY USB Gaming Mouse id=10 [slave keyboard (3)] >> ↳ USB2.0 HD UVC WebCam id=12 [slave keyboard (3)] >> ↳ Asus Keyboard id=13 [slave keyboard (3)] >> ↳ Asus WMI hotkeys id=17 [slave keyboard (3)] >> ↳ AT Translated Set 2 keyboard id=18 [slave keyboard (3)] >> ↳ G-SPY USB Gaming Mouse id=19 [slave keyboard (3)] >> ↳ Asus Keyboard id=20 [slave keyboard (3)] >> >> >> >> On 2017-05-08 08:49, Kai-Heng Feng wrote: >>> Hi aljosa, >>> >>> On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote: >>>> I read the whole threads. It's normal there's no interrupt observed >>>> if using elan_i2c driver. It should use hid-multitouch. >>>> >>>> I would like to know if there's any interrupts observed when it >>>> load hid-multitouch driver instead of elan_i2c driver. >>>> >>>> Something noted here, on my G752VSK the input device shows as >>>> ELAN1200 not ELAN1203. Although I think it should make no >>>> difference, just to note that my machine maybe a little different >>>> from the bug reporter's. >>>> >>> >>> Can you provide information Chris asked? >>> His G752 uses a slightly different touchpad so more information is >>> needed. >>> >>> Thanks! >> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Aijosa,
If you can build your own kernel, I'll suggest to add code in
i2c_hid_init_irq() in i2c-hid.c.
1. verify the return value of irq_get_trigger_type()
2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with
irqd_set_trigger_type() before request_threaded_irq()
3. reboot with your own kernel to see if it works.
Chris
On Tue, Jun 6, 2017 at 9:59 AM, 廖崇榮 <kt.liao@emc.com.tw> wrote:
> Hi Chris,
>
> From Aljosa's log, I am not sure if it's the interrupt setting.
> It seems that no event occur while finger off.
>
> If your G752VS's setting is falling edge. Maybe you tell Aljosa how to change interrupt type for testing.
>
> B.R KT
>
> -----Original Message-----
> From: Aljoša [mailto:aljosa@cromalternativemoney.org]
> Sent: Monday, June 05, 2017 6:40 PM
> To: Chris Chiu
> Cc: 廖崇榮; Kai-Heng Feng; linux-input@vger.kernel.org; 黃世鵬 經理
> Subject: Re: ASUS G752VS Touchpad does not work
>
> Just installed new kernel 4.12-rc4, my ELAN touchpad still doesn't work.
> Please find attached the dmesg output here (comment #72):
>
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456
>
>
> On 2017-06-01 14:58, Chris Chiu wrote:
>> Hi KT,
>> Yes, I've hit the interrupt type setting issues in Acer laptops.
>> If the interrupt type setting is wrong in the BIOS, the touchpad will
>> stop working after a while (often ~10 seconds). The interrupt numbers
>> observed will be a lot more than expected when touchpad is still
>> working which cause i2c read lots of dummy data, then never increase
>> when the touchpad stop responding. I believe it's something very
>> similar. Please do "sudo cat
>> /sys/kernel/debug/hid/0018:04F3:3043.0007/events" before your touchpad
>> dead to see if there's still outputs even you never touch the
>> touchpad. If the data keeps coming, that means the interrupt type
>> setting should go wrong.
>>
>> Chris
>>
>> On Thu, Jun 1, 2017 at 8:22 PM, 廖崇榮 <kt.liao@emc.com.tw> wrote:
>>> Hi Chris,
>>>
>>> His Interrupt is fasteoi, I guess it's kind of level trigger.
>>>
>>> I remember that you debug for an Acer PTP which cause touchpad no
>>> function sometimes.
>>> And it works fine after interrupt modified to edge trigger.
>>>
>>> What's your comment?
>>>
>>> Thanks KT
>>> -----Original Message-----
>>> From: Aljoša [mailto:aljosa@cromalternativemoney.org]
>>> Sent: Monday, May 29, 2017 7:04 PM
>>> To: Kai-Heng Feng
>>> Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理
>>> Subject: Re: ASUS G752VS Touchpad does not work
>>>
>>> Hello,just installed new kernel 4.12-rc3.
>>> ELAN touchpad is still completely dead on my ASUS G752VS.
>>> Complete dmesg output (comment #68) and complete output (comment #69)
>>> of ~$ cat /proc/interrupts attached here:
>>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456
>>>
>>> ~$ dmesg
>>>
>>> [5.149761] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not
>>> found, using dummy regulator [5.191090] hid-multitouch
>>> 0018:04F3:3043.0007: Ignoring the extra HID_DG_INPUTMODE [5.191133]
>>> input: ELAN1203:00 04F3:3043 Touchpad as
>>> /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203:
>>> 00/0018:04F3:3043.0007/input/input16
>>> [5.191230] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID
>>> v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00
>>>
>>> ~$ cat /proc/interrupts
>>>
>>> 16: 0 0 0 0 0 0
>>> 0 0 IR-IO-APIC 16-fasteoi idma64.0,
>>> i2c_designware.0
>>> 17: 709 9839 0 0 0 0
>>> 0 0 IR-IO-APIC 17-fasteoi idma64.1,
>>> i2c_designware.1
>>> 95: 1 552 0 0 0 0
>>> 0 0 IR-IO-APIC 95-fasteoi ELAN1203:00
>>>
>>> ~$ xinput list
>>> ⎡ Virtual core pointer id=2 [master pointer (3)]
>>> ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
>>> ⎜ ↳ G-SPY USB Gaming Mouse id=11 [slave pointer (2)]
>>> ⎜ ↳ Asus Keyboard id=14 [slave pointer (2)] ⎜ ↳ Asus Keyboard id=15
>>> [slave pointer (2)]
>>> ⎜ ↳ ELAN1203:00 04F3:3043 Touchpad id=16 [slave pointer (2)]
>>> ⎣ Virtual core keyboard id=3 [master keyboard (2)]
>>> ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
>>> ↳ Power Button id=6 [slave keyboard (3)]
>>> ↳ Asus Wireless Radio Control id=7 [slave keyboard (3)]
>>> ↳ Video Bus id=8 [slave keyboard (3)]
>>> ↳ Sleep Button id=9 [slave keyboard (3)]
>>> ↳ G-SPY USB Gaming Mouse id=10 [slave keyboard (3)]
>>> ↳ USB2.0 HD UVC WebCam id=12 [slave keyboard (3)]
>>> ↳ Asus Keyboard id=13 [slave keyboard (3)]
>>> ↳ Asus WMI hotkeys id=17 [slave keyboard (3)]
>>> ↳ AT Translated Set 2 keyboard id=18 [slave keyboard (3)]
>>> ↳ G-SPY USB Gaming Mouse id=19 [slave keyboard (3)]
>>> ↳ Asus Keyboard id=20 [slave keyboard (3)]
>>>
>>>
>>>
>>> On 2017-05-08 08:49, Kai-Heng Feng wrote:
>>>> Hi aljosa,
>>>>
>>>> On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote:
>>>>> I read the whole threads. It's normal there's no interrupt observed
>>>>> if using elan_i2c driver. It should use hid-multitouch.
>>>>>
>>>>> I would like to know if there's any interrupts observed when it
>>>>> load hid-multitouch driver instead of elan_i2c driver.
>>>>>
>>>>> Something noted here, on my G752VSK the input device shows as
>>>>> ELAN1200 not ELAN1203. Although I think it should make no
>>>>> difference, just to note that my machine maybe a little different
>>>>> from the bug reporter's.
>>>>>
>>>>
>>>> Can you provide information Chris asked?
>>>> His G752 uses a slightly different touchpad so more information is
>>>> needed.
>>>>
>>>> Thanks!
>>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 7, 2017 at 5:30 PM, Chris Chiu <chiu@endlessm.com> wrote: > Hi Aijosa, > If you can build your own kernel, I'll suggest to add code in > i2c_hid_init_irq() in i2c-hid.c. > 1. verify the return value of irq_get_trigger_type() > 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with > irqd_set_trigger_type() before request_threaded_irq() > 3. reboot with your own kernel to see if it works. Hi Aljosa, I compiled a Linux kernel with above requirement, please try out: http://people.canonical.com/~khfeng/asus-hid/ -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Just installed new kernel 4.12-rc6, my ELAN touchpad is still completely dead [5.265229] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not found, using dummy regulator [5.305130] hid-multitouch 0018:04F3:3043.0007: Ignoring the extra HID_DG_INPUTMODE [5.305175] input: ELAN1203:00 04F3:3043 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203:00/0018:04F3:3043.0007/input/input16 [5.305245] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00 Please find attached the dmesg output here (comment #73): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 On 2017-06-08 10:55, Kai-Heng Feng wrote: > On Wed, Jun 7, 2017 at 5:30 PM, Chris Chiu <chiu@endlessm.com> wrote: >> Hi Aijosa, >> If you can build your own kernel, I'll suggest to add code in >> i2c_hid_init_irq() in i2c-hid.c. >> 1. verify the return value of irq_get_trigger_type() >> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with >> irqd_set_trigger_type() before request_threaded_irq() >> 3. reboot with your own kernel to see if it works. > > Hi Aljosa, > > I compiled a Linux kernel with above requirement, please try out: > http://people.canonical.com/~khfeng/asus-hid/ -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Aljosa,
From the 10_cat_sys_kernel_debug_hid_0018_04F3_3043_0007_events,
your touchpad seems to work fine. You can verify with the "evtest" or
"xev" to see if the events printed based on your touchpad move. So I
think it could be the display driver issue. Please give me the
information of the NVIDIA display in you G752VSK. Thanks.
Chris
On Thu, Jun 8, 2017 at 7:48 PM, Aljoša <aljosa@cromalternativemoney.org> wrote:
> I just installed your kernel, thank you very much. ELAN touchpad still
> doesn't work.
> Please find attached:
>
> ========
>
> dmesg_109.txt
>
> 7_cat_proc_interrupts.txt
> (without touching the touchpad)
>
> 8_cat_proc_interrupts.txt
> (with touching the touchpad and pressing its buttons)
>
> 9_cat_sys_kernel_debug_hid_0018_04F3_3043_0007_events
> (without touching the touchpad, not sure if I succeeded to execute the
> command within 10 seconds after power up)
>
> 10_cat_sys_kernel_debug_hid_0018_04F3_3043_0007_events
> (with touching the touchpad and pressing its buttons, not sure if I
> succeeded to execute the command within 10 seconds after power up)
>
> ========
>
> If it can anyhow help you, here's Windows driver (ASUS Precision Touchpad;
> V11.0.10.02; 2016/06/14)
> http://dlcdnet.asus.com/pub/ASUS/nb/DriversForWin10/TouchPad/Touchpad_ASUS_Win10_64_VER1101002.zip?_ga=2.172356131.1012542656.1496921505-2120895590.1496921505
>
> PS: if you want, one of these days we can meet each other via Skype, I can
> easily install TeamViewer so you can experiment in my notebook whatever you
> want without losing time and patience...
>
> "My touchpad (ELAN1203:00 04F3:3043) doesn't work on my asus G752VS laptop
> on debian stretch; at the last update of xserver-xorg-input-libinput and
> libinput10 my touchpad is put suddenly to work but after a reboot no longer
> works..."
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=855317
>
>
>
> On 2017-06-08 10:55, Kai-Heng Feng wrote:
>>
>> On Wed, Jun 7, 2017 at 5:30 PM, Chris Chiu <chiu@endlessm.com> wrote:
>>>
>>> Hi Aijosa,
>>> If you can build your own kernel, I'll suggest to add code in
>>> i2c_hid_init_irq() in i2c-hid.c.
>>> 1. verify the return value of irq_get_trigger_type()
>>> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with
>>> irqd_set_trigger_type() before request_threaded_irq()
>>> 3. reboot with your own kernel to see if it works.
>>
>>
>> Hi Aljosa,
>>
>> I compiled a Linux kernel with above requirement, please try out:
>> http://people.canonical.com/~khfeng/asus-hid/
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jun 20, 2017 at 5:53 PM, Aljoša <aljosa@cromalternativemoney.org> wrote: > Currently I'm using 4.11.0-5.10 kernel compiled by Kai-Heng Feng: > http://people.canonical.com/~khfeng/asus-hid/ FWIW, > 1. verify the return value of irq_get_trigger_type() [ 4.478815] i2c_hid i2c-ELAN1203:00: Trigger type: 0 > 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with > irqd_set_trigger_type() before request_threaded_irq() > 3. reboot with your own kernel to see if it works. I also set the type to IRQ_TYPE_EDGE_FALLING. But looks like it didn't work for the user. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Just installed new kernel 4.12-rc7, my ELAN touchpad is still completely dead. Please find attached the dmesg output file here (comment #74): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 [ 5.320298] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not found, using dummy regulator [ 5.581767] hid-multitouch 0018:04F3:3043.0007: Ignoring the extra HID_DG_INPUTMODE [ 5.581851] input: ELAN1203:00 04F3:3043 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1203:00/0018:04F3:3043.0007/input/input16 [ 5.581967] hid-multitouch 0018:04F3:3043.0007: input,hidraw6: I2C HID v1.00 Mouse [ELAN1203:00 04F3:3043] on i2c-ELAN1203:00 Additionally, my wifi stopped working too: [4.542384] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-30.ucode failed with error -2 [4.542606] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-29.ucode failed with error -2 [4.542617] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-28.ucode failed with error -2 [4.542626] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-27.ucode failed with error -2 [4.542704] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2 [4.542714] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2 [4.542723] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2 [4.542732] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2 [4.542816] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-22.ucode failed with error -2 [4.542817] iwlwifi 0000:02:00.0: no suitable firmware found! [4.542836] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-8000C-22 [4.542853] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-8000C-30 [4.542870] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git and I'm also getting the following "Firmware Bug" message: [4.440279] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [4.440343] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 On 2017-06-20 12:06, Kai-Heng Feng wrote: > On Tue, Jun 20, 2017 at 5:53 PM, Aljoša > <aljosa@cromalternativemoney.org> wrote: >> Currently I'm using 4.11.0-5.10 kernel compiled by Kai-Heng Feng: >> http://people.canonical.com/~khfeng/asus-hid/ > > FWIW, > >> 1. verify the return value of irq_get_trigger_type() > [ 4.478815] i2c_hid i2c-ELAN1203:00: Trigger type: 0 > >> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with >> irqd_set_trigger_type() before request_threaded_irq() >> 3. reboot with your own kernel to see if it works. > > I also set the type to IRQ_TYPE_EDGE_FALLING. But looks like it didn't > work for the user. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, I have just installed the new Linux 4.12 kernel. My ELAN touchpad is still completely dead. Please find attached the complete dmesg output file here (comment #75): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 On 2017-06-20 12:06, Kai-Heng Feng wrote: > On Tue, Jun 20, 2017 at 5:53 PM, Aljoša > <aljosa@cromalternativemoney.org> wrote: >> Currently I'm using 4.11.0-5.10 kernel compiled by Kai-Heng Feng: >> http://people.canonical.com/~khfeng/asus-hid/ > > FWIW, > >> 1. verify the return value of irq_get_trigger_type() > [ 4.478815] i2c_hid i2c-ELAN1203:00: Trigger type: 0 > >> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with >> irqd_set_trigger_type() before request_threaded_irq() >> 3. reboot with your own kernel to see if it works. > > I also set the type to IRQ_TYPE_EDGE_FALLING. But looks like it didn't > work for the user. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Chris thinks touchpad works fine but display card issue in previous mail. Could anyone help to check it? -----Original Message----- From: Aljoša [mailto:aljosa@cromalternativemoney.org] Sent: Monday, July 03, 2017 5:03 PM To: Kai-Heng Feng Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理 Subject: Re: ASUS G752VS Touchpad does not work Hello, I have just installed the new Linux 4.12 kernel. My ELAN touchpad is still completely dead. Please find attached the complete dmesg output file here (comment #75): https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 On 2017-06-20 12:06, Kai-Heng Feng wrote: > On Tue, Jun 20, 2017 at 5:53 PM, Aljoša > <aljosa@cromalternativemoney.org> wrote: >> Currently I'm using 4.11.0-5.10 kernel compiled by Kai-Heng Feng: >> http://people.canonical.com/~khfeng/asus-hid/ > > FWIW, > >> 1. verify the return value of irq_get_trigger_type() > [ 4.478815] i2c_hid i2c-ELAN1203:00: Trigger type: 0 > >> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with >> irqd_set_trigger_type() before request_threaded_irq() 3. reboot with >> your own kernel to see if it works. > > I also set the type to IRQ_TYPE_EDGE_FALLING. But looks like it didn't > work for the user. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
ELAN touchpad completely dead - possibly caused by Nvidia driver? https://devtalk.nvidia.com/default/topic/1016797/linux/elan-touchpad-completely-dead-possibly-caused-by-nvidia-driver-/ On 2017-07-03 12:30, 廖崇榮 wrote: > Chris thinks touchpad works fine but display card issue in previous > mail. > Could anyone help to check it? > > -----Original Message----- > From: Aljoša [mailto:aljosa@cromalternativemoney.org] > Sent: Monday, July 03, 2017 5:03 PM > To: Kai-Heng Feng > Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理 > Subject: Re: ASUS G752VS Touchpad does not work > > Hello, > I have just installed the new Linux 4.12 kernel. > My ELAN touchpad is still completely dead. > Please find attached the complete dmesg output file here (comment #75): > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 > > > On 2017-06-20 12:06, Kai-Heng Feng wrote: >> On Tue, Jun 20, 2017 at 5:53 PM, Aljoša >> <aljosa@cromalternativemoney.org> wrote: >>> Currently I'm using 4.11.0-5.10 kernel compiled by Kai-Heng Feng: >>> http://people.canonical.com/~khfeng/asus-hid/ >> >> FWIW, >> >>> 1. verify the return value of irq_get_trigger_type() >> [ 4.478815] i2c_hid i2c-ELAN1203:00: Trigger type: 0 >> >>> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with >>> irqd_set_trigger_type() before request_threaded_irq() 3. reboot with >>> your own kernel to see if it works. >> >> I also set the type to IRQ_TYPE_EDGE_FALLING. But looks like it didn't >> work for the user. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
06 July 2017,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456
comment #76 by FZ (sirfz):
I installed Ubuntu 17.04 on mu new G752VS yesterday and the ELAN
Touchpad was completely non-functional. Today, out of no where and
without any reasonable explanation, it started working after a resume
from sleep (opened lid). Right now it's fully functional, both buttons
are working as well as tracking and multi-touch gestures (e.g.
double-finger scrolling). All I did was install a few updates using the
Software Updater today.
$ uname -a
Linux fzrog 4.10.0-26-generic #30-Ubuntu SMP Tue Jun 27 09:30:12 UTC
2017 x86_64 x86_64 x86_64 GNU/Linux
$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech MX Master id=10 [slave pointer (2)]
⎜ ↳ ASASTeK COMPUTER INC. ROG MacroKey id=16 [slave pointer (2)]
⎜ ↳ ELAN1203:00 04F3:301E Touchpad id=17 [slave pointer (2)]
⎜ ↳ Logitech M510 id=21 [slave pointer (2)]
⎜ ↳ Logitech K350 id=12 [slave pointer (2)]
⎜ ↳ ASASTeK COMPUTER INC. ROG MacroKey id=15 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ ASASTeK COMPUTER INC. ROG MacroKey id=14 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ Logitech MX Master id=11 [slave keyboard (3)]
↳ USB2.0 HD UVC WebCam id=13 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=19 [slave keyboard (3)]
↳ Asus WMI hotkeys id=18 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Asus Wireless Radio Control id=7 [slave keyboard (3)]
↳ Logitech K350 id=20 [slave keyboard (3)]
↳ ASASTeK COMPUTER INC. ROG MacroKey id=22 [slave keyboard (3)]
On 2017-07-03 12:30, 廖崇榮 wrote:
> Chris thinks touchpad works fine but display card issue in previous
> mail.
> Could anyone help to check it?
>
> -----Original Message-----
> From: Aljoša [mailto:aljosa@cromalternativemoney.org]
> Sent: Monday, July 03, 2017 5:03 PM
> To: Kai-Heng Feng
> Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理
> Subject: Re: ASUS G752VS Touchpad does not work
>
> Hello,
> I have just installed the new Linux 4.12 kernel.
> My ELAN touchpad is still completely dead.
> Please find attached the complete dmesg output file here (comment #75):
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456
>
>
> On 2017-06-20 12:06, Kai-Heng Feng wrote:
>> On Tue, Jun 20, 2017 at 5:53 PM, Aljoša
>> <aljosa@cromalternativemoney.org> wrote:
>>> Currently I'm using 4.11.0-5.10 kernel compiled by Kai-Heng Feng:
>>> http://people.canonical.com/~khfeng/asus-hid/
>>
>> FWIW,
>>
>>> 1. verify the return value of irq_get_trigger_type()
>> [ 4.478815] i2c_hid i2c-ELAN1203:00: Trigger type: 0
>>
>>> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with
>>> irqd_set_trigger_type() before request_threaded_irq() 3. reboot with
>>> your own kernel to see if it works.
>>
>> I also set the type to IRQ_TYPE_EDGE_FALLING. But looks like it didn't
>> work for the user.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
* Ubuntu 17.10 daily build (2017-07-10), kernel 4.10.0-19 Booted from Live USB, without USB mouse connected: ELAN touhpad doesn't work at all, but al least touchpad cursor is visible all the time. I've tried to disable/enable the touchpad via system settings, but nothing changes. After that, I suspended my Asus G752VS laptop via shutdown/suspend menu and then I disconnected the USB mouse. After waking up from suspend, my ELAN touhpad magically became fully functional - everything works fabulously. * Fedora Workstation 26, kernel 4.11.8 Booted from Live USB, without USB mouse connected: ELAN touhpad doesn't work at all, but al least touchpad cursor is visible all the time. With the USB mouse connected, I've tried to disable/enable the touchpad via system settings, but nothing changes. After that, I pressed the power button to suspend my Asus G752VS laptop and then I disconnected the USB mouse. After pressing once again the power button to wake up from suspend, my ELAN touhpad magically became fully functional - everything works fabulously. * As reported here https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456/comments/76 the trick should work also with Ubuntu 17.04 but that's not my case. My current Ubuntu 17.04 was installed while it was still in development - so I will perform a new clean installation (without Windows) in the next few days. On 2017-07-03 12:30, 廖崇榮 wrote: > Chris thinks touchpad works fine but display card issue in previous > mail. > Could anyone help to check it? > > -----Original Message----- > From: Aljoša [mailto:aljosa@cromalternativemoney.org] > Sent: Monday, July 03, 2017 5:03 PM > To: Kai-Heng Feng > Cc: Chris Chiu; 廖崇榮; linux-input@vger.kernel.org; 黃世鵬 經理 > Subject: Re: ASUS G752VS Touchpad does not work > > Hello, > I have just installed the new Linux 4.12 kernel. > My ELAN touchpad is still completely dead. > Please find attached the complete dmesg output file here (comment #75): > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 > > > On 2017-06-20 12:06, Kai-Heng Feng wrote: >> On Tue, Jun 20, 2017 at 5:53 PM, Aljoša >> <aljosa@cromalternativemoney.org> wrote: >>> Currently I'm using 4.11.0-5.10 kernel compiled by Kai-Heng Feng: >>> http://people.canonical.com/~khfeng/asus-hid/ >> >> FWIW, >> >>> 1. verify the return value of irq_get_trigger_type() >> [ 4.478815] i2c_hid i2c-ELAN1203:00: Trigger type: 0 >> >>> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with >>> irqd_set_trigger_type() before request_threaded_irq() 3. reboot with >>> your own kernel to see if it works. >> >> I also set the type to IRQ_TYPE_EDGE_FALLING. But looks like it didn't >> work for the user. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
22 September 2017, https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 comment #130 by Caleb McKay (caleb-9): This guy on the Asus forum posted a firmware upgrade for the touchpad that fixes the ongoing Windows issues. I took a chance for grins and installed it, and it definitely fixed the sleep issues in Windows 10. However, after installing, my touchpad now works perfectly under Ubuntu 17.04 as well. Not sure where the original source of the patch came from, but it definitely works: https://rog.asus.com/forum/showthread.php?93405-G-752-VS-Touchpad-Gesture-Fix On 2017-06-20 12:06, Kai-Heng Feng wrote: > On Tue, Jun 20, 2017 at 5:53 PM, Aljoša > <aljosa@cromalternativemoney.org> wrote: >> Currently I'm using 4.11.0-5.10 kernel compiled by Kai-Heng Feng: >> http://people.canonical.com/~khfeng/asus-hid/ > > FWIW, > >> 1. verify the return value of irq_get_trigger_type() > [ 4.478815] i2c_hid i2c-ELAN1203:00: Trigger type: 0 > >> 2. Force the trigger type to IRQ_TYPE_EDGE_FALLING with >> irqd_set_trigger_type() before request_threaded_irq() >> 3. reboot with your own kernel to see if it works. > > I also set the type to IRQ_TYPE_EDGE_FALLING. But looks like it didn't > work for the user. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dear Linux kernel developers, with a hope that this message can somehow help finding the definitive and complete solution, I'm writing to inform you about some important news regarding Asus G752 laptop series and a long standing ELAN touchpad issue (touchpad "ELAN1203:00 04F3:3043" completely dead). Some people reported in 2017 that installing a "suspicious" file under Windows solves the ELAN touchpad Linux problem too: https://rog.asus.com/forum/showthread.php?93405-G-752-VS-Touchpad-Gesture-Fix https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456/comments/130 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456/comments/134 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456/comments/144 After a long time thinking, I didn't want to take a risk since the mentioned Windows file is "suspicious". Now the big news is that after executing a few simple commands, ELAN touchpad is miraculously awaken from death and it starts partially functioning. If you have some free time, please take a look here: comment 152 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 Best regards. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Compared to other Linux distros, Fedora 28 Atomic Workstation kills "ELAN1203:00 04F3:3043" touchpad too. After one year and a half, the good news is that one user reported that the Anaconda setup of Fedora 28 Atomic Workstation fully activates "ELAN1203:00 04F3:3043" touchpad! I couldn't find the live image, so consequently without booting up the USB into the live session I was not able to try diagnostic commands. But I can confirm that the Anaconda setup of Fedora 28 Atomic Workstation fully activates "ELAN1203:00 04F3:3043" touchpad, even with multitouch and tap-to-click. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1653456 On 2017-05-08 08:49, Kai-Heng Feng wrote: > Hi aljosa, > > On Fri, May 5, 2017 at 9:05 PM, Chris Chiu <chiu@endlessm.com> wrote: >> I read the whole threads. It's normal there's no interrupt observed if >> using elan_i2c driver. It should use hid-multitouch. >> >> I would like to know if there's any interrupts observed when it load >> hid-multitouch driver instead of elan_i2c driver. >> >> Something noted here, on my G752VSK the input device shows as ELAN1200 >> not ELAN1203. Although I think it should make no difference, just to >> note that my machine maybe a little different from the bug reporter's. >> > > Can you provide information Chris asked? > His G752 uses a slightly different touchpad so more information is > needed. > > Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index da62a7695e77..acddb407e766 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2377,6 +2377,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) }, { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0400) }, { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0401) }, + { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x3043) }, { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) }, diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index a26f44c28d82..bf661ce5dccc 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1235,6 +1238,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN0600", 0 }, { "ELAN0605", 0 }, { "ELAN1000", 0 }, + { "ELAN1203", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, elan_acpi_id);