| Message ID | 20170329232113.19078-1-stefan@agner.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Mar 29, 2017 at 04:21:09PM -0700, Stefan Agner wrote: > To make use of the new eLCDIF DRM driver OF graph description is > required. Describe the display using OF graph nodes. > > Signed-off-by: Stefan Agner <stefan@agner.ch> Applied all, thanks.
Hi Stefan, On Wed, Mar 29, 2017 at 8:21 PM, Stefan Agner <stefan@agner.ch> wrote: > To make use of the new eLCDIF DRM driver OF graph description is > required. Describe the display using OF graph nodes. > > Signed-off-by: Stefan Agner <stefan@agner.ch> Could you please confirm that drm/mxsfb is working fine on 4.11 on your board? I am converting mx6sx sdb to use drm/mxsfb and I noticed that when board boots I get garbage on the display. If I do a blank/unblank then things are displayed correctly. Thanks
On Fri, May 5, 2017 at 8:48 AM, Fabio Estevam <festevam@gmail.com> wrote: > Could you please confirm that drm/mxsfb is working fine on 4.11 on your board? > > I am converting mx6sx sdb to use drm/mxsfb and I noticed that when > board boots I get garbage on the display. > > If I do a blank/unblank then things are displayed correctly. Ok, I managed to fix the drm/mxsfb driver. Will submit a patch shortly.
On 2017-05-05 06:18, Fabio Estevam wrote: > On Fri, May 5, 2017 at 8:48 AM, Fabio Estevam <festevam@gmail.com> wrote: > >> Could you please confirm that drm/mxsfb is working fine on 4.11 on your board? >> >> I am converting mx6sx sdb to use drm/mxsfb and I noticed that when >> board boots I get garbage on the display. >> >> If I do a blank/unblank then things are displayed correctly. > > Ok, I managed to fix the drm/mxsfb driver. > > Will submit a patch shortly. FWIW, it works, on i.MX 7 here, but I also have a U-Boot which initialized eLCDIF first. Will check your patch and without U-Boot eLCDIF support. -- Stefan
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 373ee19196a6..7a98a45a0d95 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -44,6 +44,17 @@ chosen { stdout-path = "serial0:115200n8"; }; + + panel: panel { + compatible = "edt,et057090dhu"; + backlight = <&bl>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; }; &bl { @@ -75,32 +86,11 @@ }; &lcdif { - display = <&display0>; status = "okay"; - display0: lcd-display { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&timing_vga>; - - /* Standard VGA timing */ - timing_vga: 640x480 { - clock-frequency = <25175000>; - hactive = <640>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <24>; - vback-porch = <32>; - vfront-porch = <11>; - hsync-len = <96>; - vsync-len = <2>; - de-active = <1>; - hsync-active = <0>; - vsync-active = <0>; - pixelclk-active = <0>; - }; + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; }; }; };
To make use of the new eLCDIF DRM driver OF graph description is required. Describe the display using OF graph nodes. Signed-off-by: Stefan Agner <stefan@agner.ch> --- arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 38 +++++++++++------------------ 1 file changed, 14 insertions(+), 24 deletions(-)