| Message ID | 1494348286-10253-4-git-send-email-sundeep.lkml@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Subbaraya, Like my comment for the timer model, I'd name this model "mss_spi". The only difference I see in the SF2 is the STAT8 register. No need to register both devices now but maybe you can add a comment about it? On 05/09/2017 01:44 PM, Subbaraya Sundeep wrote: > Modelled Microsemi's Smartfusion2 SPI controller. > > Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> > --- > hw/ssi/Makefile.objs | 1 + > hw/ssi/msf2-spi.c | 378 ++++++++++++++++++++++++++++++++++++++++++++++ > include/hw/ssi/msf2-spi.h | 105 +++++++++++++ > 3 files changed, 484 insertions(+) > create mode 100644 hw/ssi/msf2-spi.c > create mode 100644 include/hw/ssi/msf2-spi.h > > diff --git a/hw/ssi/Makefile.objs b/hw/ssi/Makefile.objs > index 487add2..3105c4b 100644 > --- a/hw/ssi/Makefile.objs > +++ b/hw/ssi/Makefile.objs > @@ -4,6 +4,7 @@ common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o > common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o > common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o > common-obj-$(CONFIG_STM32F2XX_SPI) += stm32f2xx_spi.o > +common-obj-$(CONFIG_MSF2) += msf2-spi.o Not a big deal but his define only appears after applying the next patch. > > obj-$(CONFIG_OMAP) += omap_spi.o > obj-$(CONFIG_IMX) += imx_spi.o > diff --git a/hw/ssi/msf2-spi.c b/hw/ssi/msf2-spi.c > new file mode 100644 > index 0000000..2059ed9 > --- /dev/null > +++ b/hw/ssi/msf2-spi.c > @@ -0,0 +1,378 @@ > +/* > + * SPI controller model of Microsemi SmartFusion2. > + * > + * Copyright (C) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> > + * > + * Permission is hereby granted, free of charge, to any person obtaining a copy > + * of this software and associated documentation files (the "Software"), to deal > + * in the Software without restriction, including without limitation the rights > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell > + * copies of the Software, and to permit persons to whom the Software is > + * furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice shall be included in > + * all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN > + * THE SOFTWARE. > + */ > + > +#include "hw/ssi/msf2-spi.h" > + > +#ifndef MSF2_SPI_ERR_DEBUG > +#define MSF2_SPI_ERR_DEBUG 0 > +#endif > + > +#define DB_PRINT_L(lvl, fmt, args...) do { \ > + if (MSF2_SPI_ERR_DEBUG >= lvl) { \ > + qemu_log("%s: " fmt, __func__, ## args); \ > + } \ > +} while (0); > + > +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) > + > +static void txfifo_reset(MSF2SpiState *s) > +{ > + fifo32_reset(&s->tx_fifo); > + > + s->regs[R_SPI_STATUS] &= ~S_TXFIFOFUL; > + s->regs[R_SPI_STATUS] |= S_TXFIFOEMP; > +} > + > +static void rxfifo_reset(MSF2SpiState *s) > +{ > + fifo32_reset(&s->rx_fifo); > + > + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; > + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; > +} > + > +static void set_fifodepth(MSF2SpiState *s) > +{ > + int size = s->regs[R_SPI_DFSIZE] & FRAMESZ_MASK; > + > + if (0 <= size && size <= 8) { > + s->fifo_depth = 32; > + } > + if (9 <= size && size <= 16) { > + s->fifo_depth = 16; > + } > + if (17 <= size && size <= 32) { > + s->fifo_depth = 8; > + } > +} > + > +static void msf2_spi_do_reset(MSF2SpiState *s) > +{ > + memset(s->regs, 0, sizeof s->regs); > + s->regs[R_SPI_CONTROL] = 0x80000102; > + s->regs[R_SPI_DFSIZE] = 0x4; > + s->regs[R_SPI_STATUS] = 0x2440; > + s->regs[R_SPI_CLKGEN] = 0x7; > + s->regs[R_SPI_STAT8] = 0x7; > + s->regs[R_SPI_RIS] = 0x0; > + > + s->fifo_depth = 4; > + s->frame_count = 1; > + s->enabled = false; > + > + rxfifo_reset(s); > + txfifo_reset(s); > +} > + > +static void update_mis(MSF2SpiState *s) > +{ > + uint32_t reg = s->regs[R_SPI_CONTROL]; > + uint32_t tmp; > + > + /* > + * form the Control register interrupt enable bits > + * same as RIS, MIS and Interrupt clear registers for simplicity > + */ > + tmp = ((reg & C_INTRXOVRFLO) >> 4) | ((reg & C_INTRXDATA) >> 3) | > + ((reg & C_INTTXDATA) >> 5); > + s->regs[R_SPI_MIS] |= tmp & s->regs[R_SPI_RIS]; > +} > + > +static void spi_update_irq(MSF2SpiState *s) > +{ > + int irq; > + > + update_mis(s); > + irq = !!(s->regs[R_SPI_MIS]); > + > + qemu_set_irq(s->irq, irq); > +} > + > +static void msf2_spi_reset(DeviceState *d) > +{ > + msf2_spi_do_reset(MSF2_SPI(d)); > +} > + > +static uint64_t > +spi_read(void *opaque, hwaddr addr, unsigned int size) > +{ > + MSF2SpiState *s = opaque; > + uint32_t ret = 0; > + > + addr >>= 2; > + switch (addr) { > + case R_SPI_RX: > + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; > + s->regs[R_SPI_STATUS] &= ~RXCHOVRF; > + ret = fifo32_pop(&s->rx_fifo); > + if (fifo32_is_empty(&s->rx_fifo)) { > + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; > + } > + break; > + > + case R_SPI_MIS: > + update_mis(s); > + ret = s->regs[R_SPI_MIS]; > + break; > + > + default: > + if (addr < ARRAY_SIZE(s->regs)) { > + ret = s->regs[addr]; > + } else { > + qemu_log_mask(LOG_GUEST_ERROR, > + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, > + addr * 4); Drop '\n' while calling qemu_log_mask(). > + } > + break; > + } > + > + DB_PRINT("addr=0x%" HWADDR_PRIx " = 0x%" PRIx32 "\n", addr * 4, ret); > + spi_update_irq(s); > + return ret; > +} > + > +static void assert_cs(MSF2SpiState *s) > +{ > + qemu_set_irq(s->cs_line, 0); > +} > + > +static void deassert_cs(MSF2SpiState *s) > +{ > + qemu_set_irq(s->cs_line, 1); > +} > + > +static void spi_flush_txfifo(MSF2SpiState *s) > +{ > + uint32_t tx; > + uint32_t rx; > + bool sps = !!(s->regs[R_SPI_CONTROL] & C_SPS); > + > + /* > + * Chip Select(CS) is automatically controlled by this controller. > + * If SPS bit is set in Control register then CS is asserted > + * until all the frames set in frame count of Control register are > + * transferred. If SPS is not set then CS pulses between frames. > + * Note that Slave Select register specifies which of the CS line > + * has to be controlled automatically by controller. Bits SS[7:1] are for > + * masters in FPGA fabric since we model only Microcontroller subsystem > + * of Smartfusion2 we control only one CS(SS[0]) line. > + */ > + while (!fifo32_is_empty(&s->tx_fifo) && s->frame_count) { > + assert_cs(s); > + > + s->regs[R_SPI_STATUS] &= ~TXDONE; > + s->regs[R_SPI_STATUS] &= ~RXRDY; > + > + tx = fifo32_pop(&s->tx_fifo); > + DB_PRINT("data tx:0x%" PRIx32 "\n", tx); > + rx = ssi_transfer(s->spi, tx); > + DB_PRINT("data rx:0x%" PRIx32 "\n", rx); > + > + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { > + s->regs[R_SPI_STATUS] |= RXCHOVRF; > + s->regs[R_SPI_RIS] |= RXCHOVRF; > + } else { > + fifo32_push(&s->rx_fifo, rx); > + s->regs[R_SPI_STATUS] &= ~S_RXFIFOEMP; > + if (fifo32_num_used(&s->rx_fifo) == (s->fifo_depth - 1)) { > + s->regs[R_SPI_STATUS] |= S_RXFIFOFULNXT; > + } > + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { > + s->regs[R_SPI_STATUS] |= S_RXFIFOFUL; > + } > + } > + s->frame_count--; > + if (!sps) { > + deassert_cs(s); > + assert_cs(s); > + } > + } > + > + if (!sps) { > + deassert_cs(s); > + } > + > + if (!s->frame_count) { > + s->frame_count = (s->regs[R_SPI_CONTROL] & FMCOUNT_MASK) >> > + FMCOUNT_SHIFT; > + if (sps) { > + deassert_cs(s); > + } > + s->regs[R_SPI_RIS] |= TXDONE; > + s->regs[R_SPI_RIS] |= RXRDY; > + s->regs[R_SPI_STATUS] |= TXDONE; > + s->regs[R_SPI_STATUS] |= RXRDY; > + } > +} > + > +static void spi_write(void *opaque, hwaddr addr, > + uint64_t val64, unsigned int size) > +{ > + MSF2SpiState *s = opaque; > + uint32_t value = val64; > + > + DB_PRINT("addr=0x%" HWADDR_PRIx " =0x%" PRIx32 "\n", addr, value); > + addr >>= 2; > + > + switch (addr) { > + case R_SPI_TX: > + /* adding to already full FIFO */ > + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { > + break; > + } > + s->regs[R_SPI_STATUS] &= ~S_TXFIFOEMP; > + fifo32_push(&s->tx_fifo, value); > + if (fifo32_num_used(&s->tx_fifo) == (s->fifo_depth - 1)) { > + s->regs[R_SPI_STATUS] |= S_TXFIFOFULNXT; > + } > + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { > + s->regs[R_SPI_STATUS] |= S_TXFIFOFUL; > + } > + if (s->enabled) { > + spi_flush_txfifo(s); > + } > + break; > + > + case R_SPI_CONTROL: > + s->regs[R_SPI_CONTROL] = value; > + if (value & C_BIGFIFO) { > + set_fifodepth(s); > + } else { > + s->fifo_depth = 4; > + } > + if (value & C_ENABLE) { > + s->enabled = true; > + } else { > + s->enabled = false; > + } > + s->frame_count = (value & FMCOUNT_MASK) >> FMCOUNT_SHIFT; > + if (value & C_RESET) { > + msf2_spi_do_reset(s); > + } > + break; > + > + case R_SPI_DFSIZE: > + if (s->enabled) { > + break; > + } > + s->regs[R_SPI_DFSIZE] = value; > + break; > + > + case R_SPI_INTCLR: > + s->regs[R_SPI_INTCLR] = value; > + if (value & TXDONE) { > + s->regs[R_SPI_RIS] &= ~TXDONE; > + } > + if (value & RXRDY) { > + s->regs[R_SPI_RIS] &= ~RXRDY; > + } > + if (value & RXCHOVRF) { > + s->regs[R_SPI_RIS] &= ~RXCHOVRF; > + } > + break; > + > + case R_SPI_MIS: > + case R_SPI_STATUS: > + case R_SPI_RIS: > + break; > + > + default: > + if (addr < ARRAY_SIZE(s->regs)) { > + s->regs[addr] = value; > + } else { > + qemu_log_mask(LOG_GUEST_ERROR, > + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, > + addr * 4); > + } > + break; > + } > + > + spi_update_irq(s); > +} > + > +static const MemoryRegionOps spi_ops = { > + .read = spi_read, > + .write = spi_write, > + .endianness = DEVICE_NATIVE_ENDIAN, > + .valid = { > + .min_access_size = 4, > + .max_access_size = 4 > + } > +}; > + > +static void msf2_spi_realize(DeviceState *dev, Error **errp) > +{ > + MSF2SpiState *s = MSF2_SPI(dev); > + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); > + > + DB_PRINT("\n"); > + > + s->spi = ssi_create_bus(dev, "spi0"); > + > + sysbus_init_irq(sbd, &s->irq); > + ssi_auto_connect_slaves(dev, &s->cs_line, s->spi); > + sysbus_init_irq(sbd, &s->cs_line); > + > + memory_region_init_io(&s->mmio, OBJECT(s), &spi_ops, s, > + TYPE_MSF2_SPI, R_SPI_MAX * 4); > + sysbus_init_mmio(sbd, &s->mmio); > + > + fifo32_create(&s->tx_fifo, FIFO_CAPACITY); > + fifo32_create(&s->rx_fifo, FIFO_CAPACITY); > +} > + > +static const VMStateDescription vmstate_msf2_spi = { > + .name = TYPE_MSF2_SPI, > + .version_id = 1, > + .minimum_version_id = 1, > + .fields = (VMStateField[]) { > + VMSTATE_FIFO32(tx_fifo, MSF2SpiState), > + VMSTATE_FIFO32(rx_fifo, MSF2SpiState), > + VMSTATE_UINT32_ARRAY(regs, MSF2SpiState, R_SPI_MAX), > + VMSTATE_END_OF_LIST() > + } > +}; > + > +static void msf2_spi_class_init(ObjectClass *klass, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(klass); > + > + dc->realize = msf2_spi_realize; > + dc->reset = msf2_spi_reset; > + dc->vmsd = &vmstate_msf2_spi; > +} > + > +static const TypeInfo msf2_spi_info = { > + .name = TYPE_MSF2_SPI, > + .parent = TYPE_SYS_BUS_DEVICE, > + .instance_size = sizeof(MSF2SpiState), > + .class_init = msf2_spi_class_init, > +}; > + > +static void msf2_spi_register_types(void) > +{ > + type_register_static(&msf2_spi_info); > +} > + > +type_init(msf2_spi_register_types) > diff --git a/include/hw/ssi/msf2-spi.h b/include/hw/ssi/msf2-spi.h > new file mode 100644 > index 0000000..585edde > --- /dev/null > +++ b/include/hw/ssi/msf2-spi.h > @@ -0,0 +1,105 @@ > +/* > + * Microsemi SmartFusion2 SPI > + * > + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> > + * > + * Permission is hereby granted, free of charge, to any person obtaining a copy > + * of this software and associated documentation files (the "Software"), to deal > + * in the Software without restriction, including without limitation the rights > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell > + * copies of the Software, and to permit persons to whom the Software is > + * furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice shall be included in > + * all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN > + * THE SOFTWARE. > + */ > + > +#ifndef HW_MSF2_SPI_H > +#define HW_MSF2_SPI_H > + > +#include "qemu/osdep.h" > +#include "hw/sysbus.h" > +#include "hw/hw.h" > +#include "hw/ssi/ssi.h" > +#include "qemu/fifo32.h" > +#include "sysemu/sysemu.h" > +#include "qemu/log.h" > + > +#define FIFO_CAPACITY 32 > +#define FIFO_CAPACITY 32 > + > +#define R_SPI_CONTROL 0 > +#define R_SPI_DFSIZE 1 > +#define R_SPI_STATUS 2 > +#define R_SPI_INTCLR 3 > +#define R_SPI_RX 4 > +#define R_SPI_TX 5 > +#define R_SPI_CLKGEN 6 > +#define R_SPI_SS 7 > +#define R_SPI_MIS 8 > +#define R_SPI_RIS 9 > +#define R_SPI_STAT8 15 > +#define R_SPI_MAX 16 > + > +#define S_RXFIFOFUL (1 << 4) > +#define S_RXFIFOFULNXT (1 << 5) > +#define S_RXFIFOEMP (1 << 6) > +#define S_RXFIFOEMPNXT (1 << 7) > +#define S_TXFIFOFUL (1 << 8) > +#define S_TXFIFOFULNXT (1 << 9) > +#define S_TXFIFOEMP (1 << 10) > +#define S_TXFIFOEMPNXT (1 << 11) > +#define S_FRAMESTART (1 << 12) > +#define S_SSEL (1 << 13) > +#define S_ACTIVE (1 << 14) > + > +#define C_ENABLE (1 << 0) > +#define C_MODE (1 << 1) > +#define C_INTRXDATA (1 << 4) > +#define C_INTTXDATA (1 << 5) > +#define C_INTRXOVRFLO (1 << 6) > +#define C_SPS (1 << 26) > +#define C_BIGFIFO (1 << 29) > +#define C_RESET (1 << 31) > + > +#define FRAMESZ_MASK 0x1F > +#define FMCOUNT_MASK 0x00FFFF00 > +#define FMCOUNT_SHIFT 8 > + > +#define TXDONE (1 << 0) > +#define RXRDY (1 << 1) > +#define RXCHOVRF (1 << 2) > + > +#define TYPE_MSF2_SPI "msf2-spi" > +#define MSF2_SPI(obj) OBJECT_CHECK(MSF2SpiState, (obj), TYPE_MSF2_SPI) > + > +typedef struct MSF2SpiState { > + SysBusDevice parent_obj; > + > + MemoryRegion mmio; > + > + qemu_irq irq; > + > + qemu_irq cs_line; > + > + SSIBus *spi; > + > + Fifo32 rx_fifo; > + Fifo32 tx_fifo; > + > + int fifo_depth; > + uint32_t frame_count; > + bool enabled; > + > + uint32_t regs[R_SPI_MAX]; > +} MSF2SpiState; > + > +#endif /* HW_MSF2_SPI_H */ > Regards, Phil.
Hi Philippe, On Wed, May 10, 2017 at 5:42 PM, Philippe Mathieu-Daudé <f4bug@amsat.org> wrote: > Hi Subbaraya, > > Like my comment for the timer model, I'd name this model "mss_spi". > The only difference I see in the SF2 is the STAT8 register. > No need to register both devices now but maybe you can add a comment about > it? > Ok I will register only SPI0 in SoC file as of now and will add comment. > > On 05/09/2017 01:44 PM, Subbaraya Sundeep wrote: > >> Modelled Microsemi's Smartfusion2 SPI controller. >> >> Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> >> --- >> hw/ssi/Makefile.objs | 1 + >> hw/ssi/msf2-spi.c | 378 ++++++++++++++++++++++++++++++ >> ++++++++++++++++ >> include/hw/ssi/msf2-spi.h | 105 +++++++++++++ >> 3 files changed, 484 insertions(+) >> create mode 100644 hw/ssi/msf2-spi.c >> create mode 100644 include/hw/ssi/msf2-spi.h >> >> diff --git a/hw/ssi/Makefile.objs b/hw/ssi/Makefile.objs >> index 487add2..3105c4b 100644 >> --- a/hw/ssi/Makefile.objs >> +++ b/hw/ssi/Makefile.objs >> @@ -4,6 +4,7 @@ common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o >> common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o >> common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o >> common-obj-$(CONFIG_STM32F2XX_SPI) += stm32f2xx_spi.o >> +common-obj-$(CONFIG_MSF2) += msf2-spi.o >> > > Not a big deal but his define only appears after applying the next patch. Do I need to reorder the patches? > >> obj-$(CONFIG_OMAP) += omap_spi.o >> obj-$(CONFIG_IMX) += imx_spi.o >> diff --git a/hw/ssi/msf2-spi.c b/hw/ssi/msf2-spi.c >> new file mode 100644 >> index 0000000..2059ed9 >> --- /dev/null >> +++ b/hw/ssi/msf2-spi.c >> @@ -0,0 +1,378 @@ >> +/* >> + * SPI controller model of Microsemi SmartFusion2. >> + * >> + * Copyright (C) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> >> + * >> + * Permission is hereby granted, free of charge, to any person obtaining >> a copy >> + * of this software and associated documentation files (the "Software"), >> to deal >> + * in the Software without restriction, including without limitation the >> rights >> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or >> sell >> + * copies of the Software, and to permit persons to whom the Software is >> + * furnished to do so, subject to the following conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> included in >> + * all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> EXPRESS OR >> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF >> MERCHANTABILITY, >> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT >> SHALL >> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR >> OTHER >> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, >> ARISING FROM, >> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER >> DEALINGS IN >> + * THE SOFTWARE. >> + */ >> + >> +#include "hw/ssi/msf2-spi.h" >> + >> +#ifndef MSF2_SPI_ERR_DEBUG >> +#define MSF2_SPI_ERR_DEBUG 0 >> +#endif >> + >> +#define DB_PRINT_L(lvl, fmt, args...) do { \ >> + if (MSF2_SPI_ERR_DEBUG >= lvl) { \ >> + qemu_log("%s: " fmt, __func__, ## args); \ >> + } \ >> +} while (0); >> + >> +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) >> + >> +static void txfifo_reset(MSF2SpiState *s) >> +{ >> + fifo32_reset(&s->tx_fifo); >> + >> + s->regs[R_SPI_STATUS] &= ~S_TXFIFOFUL; >> + s->regs[R_SPI_STATUS] |= S_TXFIFOEMP; >> +} >> + >> +static void rxfifo_reset(MSF2SpiState *s) >> +{ >> + fifo32_reset(&s->rx_fifo); >> + >> + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; >> + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; >> +} >> + >> +static void set_fifodepth(MSF2SpiState *s) >> +{ >> + int size = s->regs[R_SPI_DFSIZE] & FRAMESZ_MASK; >> + >> + if (0 <= size && size <= 8) { >> + s->fifo_depth = 32; >> + } >> + if (9 <= size && size <= 16) { >> + s->fifo_depth = 16; >> + } >> + if (17 <= size && size <= 32) { >> + s->fifo_depth = 8; >> + } >> +} >> + >> +static void msf2_spi_do_reset(MSF2SpiState *s) >> +{ >> + memset(s->regs, 0, sizeof s->regs); >> + s->regs[R_SPI_CONTROL] = 0x80000102; >> + s->regs[R_SPI_DFSIZE] = 0x4; >> + s->regs[R_SPI_STATUS] = 0x2440; >> + s->regs[R_SPI_CLKGEN] = 0x7; >> + s->regs[R_SPI_STAT8] = 0x7; >> + s->regs[R_SPI_RIS] = 0x0; >> + >> + s->fifo_depth = 4; >> + s->frame_count = 1; >> + s->enabled = false; >> + >> + rxfifo_reset(s); >> + txfifo_reset(s); >> +} >> + >> +static void update_mis(MSF2SpiState *s) >> +{ >> + uint32_t reg = s->regs[R_SPI_CONTROL]; >> + uint32_t tmp; >> + >> + /* >> + * form the Control register interrupt enable bits >> + * same as RIS, MIS and Interrupt clear registers for simplicity >> + */ >> + tmp = ((reg & C_INTRXOVRFLO) >> 4) | ((reg & C_INTRXDATA) >> 3) | >> + ((reg & C_INTTXDATA) >> 5); >> + s->regs[R_SPI_MIS] |= tmp & s->regs[R_SPI_RIS]; >> +} >> + >> +static void spi_update_irq(MSF2SpiState *s) >> +{ >> + int irq; >> + >> + update_mis(s); >> + irq = !!(s->regs[R_SPI_MIS]); >> + >> + qemu_set_irq(s->irq, irq); >> +} >> + >> +static void msf2_spi_reset(DeviceState *d) >> +{ >> + msf2_spi_do_reset(MSF2_SPI(d)); >> +} >> + >> +static uint64_t >> +spi_read(void *opaque, hwaddr addr, unsigned int size) >> +{ >> + MSF2SpiState *s = opaque; >> + uint32_t ret = 0; >> + >> + addr >>= 2; >> + switch (addr) { >> + case R_SPI_RX: >> + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; >> + s->regs[R_SPI_STATUS] &= ~RXCHOVRF; >> + ret = fifo32_pop(&s->rx_fifo); >> + if (fifo32_is_empty(&s->rx_fifo)) { >> + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; >> + } >> + break; >> + >> + case R_SPI_MIS: >> + update_mis(s); >> + ret = s->regs[R_SPI_MIS]; >> + break; >> + >> + default: >> + if (addr < ARRAY_SIZE(s->regs)) { >> + ret = s->regs[addr]; >> + } else { >> + qemu_log_mask(LOG_GUEST_ERROR, >> + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, >> + addr * 4); >> > > Drop '\n' while calling qemu_log_mask(). Ok. > > > + } >> + break; >> + } >> + >> + DB_PRINT("addr=0x%" HWADDR_PRIx " = 0x%" PRIx32 "\n", addr * 4, ret); >> + spi_update_irq(s); >> + return ret; >> +} >> + >> +static void assert_cs(MSF2SpiState *s) >> +{ >> + qemu_set_irq(s->cs_line, 0); >> +} >> + >> +static void deassert_cs(MSF2SpiState *s) >> +{ >> + qemu_set_irq(s->cs_line, 1); >> +} >> + >> +static void spi_flush_txfifo(MSF2SpiState *s) >> +{ >> + uint32_t tx; >> + uint32_t rx; >> + bool sps = !!(s->regs[R_SPI_CONTROL] & C_SPS); >> + >> + /* >> + * Chip Select(CS) is automatically controlled by this controller. >> + * If SPS bit is set in Control register then CS is asserted >> + * until all the frames set in frame count of Control register are >> + * transferred. If SPS is not set then CS pulses between frames. >> + * Note that Slave Select register specifies which of the CS line >> + * has to be controlled automatically by controller. Bits SS[7:1] >> are for >> + * masters in FPGA fabric since we model only Microcontroller >> subsystem >> + * of Smartfusion2 we control only one CS(SS[0]) line. >> + */ >> + while (!fifo32_is_empty(&s->tx_fifo) && s->frame_count) { >> + assert_cs(s); >> + >> + s->regs[R_SPI_STATUS] &= ~TXDONE; >> + s->regs[R_SPI_STATUS] &= ~RXRDY; >> + >> + tx = fifo32_pop(&s->tx_fifo); >> + DB_PRINT("data tx:0x%" PRIx32 "\n", tx); >> + rx = ssi_transfer(s->spi, tx); >> + DB_PRINT("data rx:0x%" PRIx32 "\n", rx); >> + >> + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { >> + s->regs[R_SPI_STATUS] |= RXCHOVRF; >> + s->regs[R_SPI_RIS] |= RXCHOVRF; >> + } else { >> + fifo32_push(&s->rx_fifo, rx); >> + s->regs[R_SPI_STATUS] &= ~S_RXFIFOEMP; >> + if (fifo32_num_used(&s->rx_fifo) == (s->fifo_depth - 1)) { >> + s->regs[R_SPI_STATUS] |= S_RXFIFOFULNXT; >> + } >> + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { >> + s->regs[R_SPI_STATUS] |= S_RXFIFOFUL; >> + } >> + } >> + s->frame_count--; >> + if (!sps) { >> + deassert_cs(s); >> + assert_cs(s); >> + } >> + } >> + >> + if (!sps) { >> + deassert_cs(s); >> + } >> + >> + if (!s->frame_count) { >> + s->frame_count = (s->regs[R_SPI_CONTROL] & FMCOUNT_MASK) >> >> + FMCOUNT_SHIFT; >> + if (sps) { >> + deassert_cs(s); >> + } >> + s->regs[R_SPI_RIS] |= TXDONE; >> + s->regs[R_SPI_RIS] |= RXRDY; >> + s->regs[R_SPI_STATUS] |= TXDONE; >> + s->regs[R_SPI_STATUS] |= RXRDY; >> + } >> +} >> + >> +static void spi_write(void *opaque, hwaddr addr, >> + uint64_t val64, unsigned int size) >> +{ >> + MSF2SpiState *s = opaque; >> + uint32_t value = val64; >> + >> + DB_PRINT("addr=0x%" HWADDR_PRIx " =0x%" PRIx32 "\n", addr, value); >> + addr >>= 2; >> + >> + switch (addr) { >> + case R_SPI_TX: >> + /* adding to already full FIFO */ >> + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { >> + break; >> + } >> + s->regs[R_SPI_STATUS] &= ~S_TXFIFOEMP; >> + fifo32_push(&s->tx_fifo, value); >> + if (fifo32_num_used(&s->tx_fifo) == (s->fifo_depth - 1)) { >> + s->regs[R_SPI_STATUS] |= S_TXFIFOFULNXT; >> + } >> + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { >> + s->regs[R_SPI_STATUS] |= S_TXFIFOFUL; >> + } >> + if (s->enabled) { >> + spi_flush_txfifo(s); >> + } >> + break; >> + >> + case R_SPI_CONTROL: >> + s->regs[R_SPI_CONTROL] = value; >> + if (value & C_BIGFIFO) { >> + set_fifodepth(s); >> + } else { >> + s->fifo_depth = 4; >> + } >> + if (value & C_ENABLE) { >> + s->enabled = true; >> + } else { >> + s->enabled = false; >> + } >> + s->frame_count = (value & FMCOUNT_MASK) >> FMCOUNT_SHIFT; >> + if (value & C_RESET) { >> + msf2_spi_do_reset(s); >> + } >> + break; >> + >> + case R_SPI_DFSIZE: >> + if (s->enabled) { >> + break; >> + } >> + s->regs[R_SPI_DFSIZE] = value; >> + break; >> + >> + case R_SPI_INTCLR: >> + s->regs[R_SPI_INTCLR] = value; >> + if (value & TXDONE) { >> + s->regs[R_SPI_RIS] &= ~TXDONE; >> + } >> + if (value & RXRDY) { >> + s->regs[R_SPI_RIS] &= ~RXRDY; >> + } >> + if (value & RXCHOVRF) { >> + s->regs[R_SPI_RIS] &= ~RXCHOVRF; >> + } >> + break; >> + >> + case R_SPI_MIS: >> + case R_SPI_STATUS: >> + case R_SPI_RIS: >> + break; >> + >> + default: >> + if (addr < ARRAY_SIZE(s->regs)) { >> + s->regs[addr] = value; >> + } else { >> + qemu_log_mask(LOG_GUEST_ERROR, >> + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, >> + addr * 4); >> + } >> + break; >> + } >> + >> + spi_update_irq(s); >> +} >> + >> +static const MemoryRegionOps spi_ops = { >> + .read = spi_read, >> + .write = spi_write, >> + .endianness = DEVICE_NATIVE_ENDIAN, >> + .valid = { >> + .min_access_size = 4, >> + .max_access_size = 4 >> + } >> +}; >> + >> +static void msf2_spi_realize(DeviceState *dev, Error **errp) >> +{ >> + MSF2SpiState *s = MSF2_SPI(dev); >> + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); >> + >> + DB_PRINT("\n"); >> + >> + s->spi = ssi_create_bus(dev, "spi0"); >> + >> + sysbus_init_irq(sbd, &s->irq); >> + ssi_auto_connect_slaves(dev, &s->cs_line, s->spi); >> + sysbus_init_irq(sbd, &s->cs_line); >> + >> + memory_region_init_io(&s->mmio, OBJECT(s), &spi_ops, s, >> + TYPE_MSF2_SPI, R_SPI_MAX * 4); >> + sysbus_init_mmio(sbd, &s->mmio); >> + >> + fifo32_create(&s->tx_fifo, FIFO_CAPACITY); >> + fifo32_create(&s->rx_fifo, FIFO_CAPACITY); >> +} >> + >> +static const VMStateDescription vmstate_msf2_spi = { >> + .name = TYPE_MSF2_SPI, >> + .version_id = 1, >> + .minimum_version_id = 1, >> + .fields = (VMStateField[]) { >> + VMSTATE_FIFO32(tx_fifo, MSF2SpiState), >> + VMSTATE_FIFO32(rx_fifo, MSF2SpiState), >> + VMSTATE_UINT32_ARRAY(regs, MSF2SpiState, R_SPI_MAX), >> + VMSTATE_END_OF_LIST() >> + } >> +}; >> + >> +static void msf2_spi_class_init(ObjectClass *klass, void *data) >> +{ >> + DeviceClass *dc = DEVICE_CLASS(klass); >> + >> + dc->realize = msf2_spi_realize; >> + dc->reset = msf2_spi_reset; >> + dc->vmsd = &vmstate_msf2_spi; >> +} >> + >> +static const TypeInfo msf2_spi_info = { >> + .name = TYPE_MSF2_SPI, >> + .parent = TYPE_SYS_BUS_DEVICE, >> + .instance_size = sizeof(MSF2SpiState), >> + .class_init = msf2_spi_class_init, >> +}; >> + >> +static void msf2_spi_register_types(void) >> +{ >> + type_register_static(&msf2_spi_info); >> +} >> + >> +type_init(msf2_spi_register_types) >> diff --git a/include/hw/ssi/msf2-spi.h b/include/hw/ssi/msf2-spi.h >> new file mode 100644 >> index 0000000..585edde >> --- /dev/null >> +++ b/include/hw/ssi/msf2-spi.h >> @@ -0,0 +1,105 @@ >> +/* >> + * Microsemi SmartFusion2 SPI >> + * >> + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> >> + * >> + * Permission is hereby granted, free of charge, to any person obtaining >> a copy >> + * of this software and associated documentation files (the "Software"), >> to deal >> + * in the Software without restriction, including without limitation the >> rights >> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or >> sell >> + * copies of the Software, and to permit persons to whom the Software is >> + * furnished to do so, subject to the following conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> included in >> + * all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> EXPRESS OR >> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF >> MERCHANTABILITY, >> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT >> SHALL >> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR >> OTHER >> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, >> ARISING FROM, >> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER >> DEALINGS IN >> + * THE SOFTWARE. >> + */ >> + >> +#ifndef HW_MSF2_SPI_H >> +#define HW_MSF2_SPI_H >> + >> +#include "qemu/osdep.h" >> +#include "hw/sysbus.h" >> +#include "hw/hw.h" >> +#include "hw/ssi/ssi.h" >> +#include "qemu/fifo32.h" >> +#include "sysemu/sysemu.h" >> +#include "qemu/log.h" >> + >> +#define FIFO_CAPACITY 32 >> +#define FIFO_CAPACITY 32 >> + >> +#define R_SPI_CONTROL 0 >> +#define R_SPI_DFSIZE 1 >> +#define R_SPI_STATUS 2 >> +#define R_SPI_INTCLR 3 >> +#define R_SPI_RX 4 >> +#define R_SPI_TX 5 >> +#define R_SPI_CLKGEN 6 >> +#define R_SPI_SS 7 >> +#define R_SPI_MIS 8 >> +#define R_SPI_RIS 9 >> +#define R_SPI_STAT8 15 >> +#define R_SPI_MAX 16 >> + >> +#define S_RXFIFOFUL (1 << 4) >> +#define S_RXFIFOFULNXT (1 << 5) >> +#define S_RXFIFOEMP (1 << 6) >> +#define S_RXFIFOEMPNXT (1 << 7) >> +#define S_TXFIFOFUL (1 << 8) >> +#define S_TXFIFOFULNXT (1 << 9) >> +#define S_TXFIFOEMP (1 << 10) >> +#define S_TXFIFOEMPNXT (1 << 11) >> +#define S_FRAMESTART (1 << 12) >> +#define S_SSEL (1 << 13) >> +#define S_ACTIVE (1 << 14) >> + >> +#define C_ENABLE (1 << 0) >> +#define C_MODE (1 << 1) >> +#define C_INTRXDATA (1 << 4) >> +#define C_INTTXDATA (1 << 5) >> +#define C_INTRXOVRFLO (1 << 6) >> +#define C_SPS (1 << 26) >> +#define C_BIGFIFO (1 << 29) >> +#define C_RESET (1 << 31) >> + >> +#define FRAMESZ_MASK 0x1F >> +#define FMCOUNT_MASK 0x00FFFF00 >> +#define FMCOUNT_SHIFT 8 >> + >> +#define TXDONE (1 << 0) >> +#define RXRDY (1 << 1) >> +#define RXCHOVRF (1 << 2) >> + >> +#define TYPE_MSF2_SPI "msf2-spi" >> +#define MSF2_SPI(obj) OBJECT_CHECK(MSF2SpiState, (obj), TYPE_MSF2_SPI) >> + >> +typedef struct MSF2SpiState { >> + SysBusDevice parent_obj; >> + >> + MemoryRegion mmio; >> + >> + qemu_irq irq; >> + >> + qemu_irq cs_line; >> + >> + SSIBus *spi; >> + >> + Fifo32 rx_fifo; >> + Fifo32 tx_fifo; >> + >> + int fifo_depth; >> + uint32_t frame_count; >> + bool enabled; >> + >> + uint32_t regs[R_SPI_MAX]; >> +} MSF2SpiState; >> + >> +#endif /* HW_MSF2_SPI_H */ >> >> > Regards, > > Phil. > Thanks, Sundeep
Hi Subbaraya, On 05/12/2017 12:31 AM, sundeep subbaraya wrote: > Hi Philippe, > > On Wed, May 10, 2017 at 5:42 PM, Philippe Mathieu-Daudé <f4bug@amsat.org> > wrote: > >> Hi Subbaraya, >> >> Like my comment for the timer model, I'd name this model "mss_spi". >> The only difference I see in the SF2 is the STAT8 register. >> No need to register both devices now but maybe you can add a comment about >> it? >> > > Ok I will register only SPI0 in SoC file as of now and will add comment. > What I mean is the difference I know between mss_spi from SmartFusion versus mss_spi from the SmartFusion2 is the STAT8 register. Your file is SmartFusion2-specific just because of this unused register. Now since you have the mss_spi modeled and you want to model the SF2 SoC, you should register both SPI_0 and SPI_1, my comment was not about that. Well forget about this comment about STAT8 difference :) This is not a problem and can be improved in the future. >> >> On 05/09/2017 01:44 PM, Subbaraya Sundeep wrote: >> >>> Modelled Microsemi's Smartfusion2 SPI controller. >>> >>> Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> >>> --- >>> hw/ssi/Makefile.objs | 1 + >>> hw/ssi/msf2-spi.c | 378 ++++++++++++++++++++++++++++++ >>> ++++++++++++++++ >>> include/hw/ssi/msf2-spi.h | 105 +++++++++++++ >>> 3 files changed, 484 insertions(+) >>> create mode 100644 hw/ssi/msf2-spi.c >>> create mode 100644 include/hw/ssi/msf2-spi.h >>> >>> diff --git a/hw/ssi/Makefile.objs b/hw/ssi/Makefile.objs >>> index 487add2..3105c4b 100644 >>> --- a/hw/ssi/Makefile.objs >>> +++ b/hw/ssi/Makefile.objs >>> @@ -4,6 +4,7 @@ common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o >>> common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o >>> common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o >>> common-obj-$(CONFIG_STM32F2XX_SPI) += stm32f2xx_spi.o >>> +common-obj-$(CONFIG_MSF2) += msf2-spi.o >>> >> >> Not a big deal but his define only appears after applying the next patch. > > Do I need to reorder the patches? > It is probably not important, but for what it's worth if you checkout your tree at this patch 3/5 and build, the msf2-spi.o is not compiled. Although I'm not sure it could bother bissecting an issue in your code. >> >>> obj-$(CONFIG_OMAP) += omap_spi.o >>> obj-$(CONFIG_IMX) += imx_spi.o >>> diff --git a/hw/ssi/msf2-spi.c b/hw/ssi/msf2-spi.c >>> new file mode 100644 >>> index 0000000..2059ed9 >>> --- /dev/null >>> +++ b/hw/ssi/msf2-spi.c >>> @@ -0,0 +1,378 @@ >>> +/* >>> + * SPI controller model of Microsemi SmartFusion2. >>> + * >>> + * Copyright (C) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> >>> + * >>> + * Permission is hereby granted, free of charge, to any person obtaining >>> a copy >>> + * of this software and associated documentation files (the "Software"), >>> to deal >>> + * in the Software without restriction, including without limitation the >>> rights >>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or >>> sell >>> + * copies of the Software, and to permit persons to whom the Software is >>> + * furnished to do so, subject to the following conditions: >>> + * >>> + * The above copyright notice and this permission notice shall be >>> included in >>> + * all copies or substantial portions of the Software. >>> + * >>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >>> EXPRESS OR >>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF >>> MERCHANTABILITY, >>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT >>> SHALL >>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR >>> OTHER >>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, >>> ARISING FROM, >>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER >>> DEALINGS IN >>> + * THE SOFTWARE. >>> + */ >>> + >>> +#include "hw/ssi/msf2-spi.h" >>> + >>> +#ifndef MSF2_SPI_ERR_DEBUG >>> +#define MSF2_SPI_ERR_DEBUG 0 >>> +#endif >>> + >>> +#define DB_PRINT_L(lvl, fmt, args...) do { \ >>> + if (MSF2_SPI_ERR_DEBUG >= lvl) { \ >>> + qemu_log("%s: " fmt, __func__, ## args); \ >>> + } \ >>> +} while (0); >>> + >>> +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) >>> + >>> +static void txfifo_reset(MSF2SpiState *s) >>> +{ >>> + fifo32_reset(&s->tx_fifo); >>> + >>> + s->regs[R_SPI_STATUS] &= ~S_TXFIFOFUL; >>> + s->regs[R_SPI_STATUS] |= S_TXFIFOEMP; >>> +} >>> + >>> +static void rxfifo_reset(MSF2SpiState *s) >>> +{ >>> + fifo32_reset(&s->rx_fifo); >>> + >>> + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; >>> + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; >>> +} >>> + >>> +static void set_fifodepth(MSF2SpiState *s) >>> +{ >>> + int size = s->regs[R_SPI_DFSIZE] & FRAMESZ_MASK; >>> + >>> + if (0 <= size && size <= 8) { >>> + s->fifo_depth = 32; >>> + } >>> + if (9 <= size && size <= 16) { >>> + s->fifo_depth = 16; >>> + } >>> + if (17 <= size && size <= 32) { >>> + s->fifo_depth = 8; >>> + } >>> +} >>> + >>> +static void msf2_spi_do_reset(MSF2SpiState *s) >>> +{ >>> + memset(s->regs, 0, sizeof s->regs); >>> + s->regs[R_SPI_CONTROL] = 0x80000102; >>> + s->regs[R_SPI_DFSIZE] = 0x4; >>> + s->regs[R_SPI_STATUS] = 0x2440; >>> + s->regs[R_SPI_CLKGEN] = 0x7; >>> + s->regs[R_SPI_STAT8] = 0x7; >>> + s->regs[R_SPI_RIS] = 0x0; >>> + >>> + s->fifo_depth = 4; >>> + s->frame_count = 1; >>> + s->enabled = false; >>> + >>> + rxfifo_reset(s); >>> + txfifo_reset(s); >>> +} >>> + >>> +static void update_mis(MSF2SpiState *s) >>> +{ >>> + uint32_t reg = s->regs[R_SPI_CONTROL]; >>> + uint32_t tmp; >>> + >>> + /* >>> + * form the Control register interrupt enable bits >>> + * same as RIS, MIS and Interrupt clear registers for simplicity >>> + */ >>> + tmp = ((reg & C_INTRXOVRFLO) >> 4) | ((reg & C_INTRXDATA) >> 3) | >>> + ((reg & C_INTTXDATA) >> 5); >>> + s->regs[R_SPI_MIS] |= tmp & s->regs[R_SPI_RIS]; >>> +} >>> + >>> +static void spi_update_irq(MSF2SpiState *s) >>> +{ >>> + int irq; >>> + >>> + update_mis(s); >>> + irq = !!(s->regs[R_SPI_MIS]); >>> + >>> + qemu_set_irq(s->irq, irq); >>> +} >>> + >>> +static void msf2_spi_reset(DeviceState *d) >>> +{ >>> + msf2_spi_do_reset(MSF2_SPI(d)); >>> +} >>> + >>> +static uint64_t >>> +spi_read(void *opaque, hwaddr addr, unsigned int size) >>> +{ >>> + MSF2SpiState *s = opaque; >>> + uint32_t ret = 0; >>> + >>> + addr >>= 2; >>> + switch (addr) { >>> + case R_SPI_RX: >>> + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; >>> + s->regs[R_SPI_STATUS] &= ~RXCHOVRF; >>> + ret = fifo32_pop(&s->rx_fifo); >>> + if (fifo32_is_empty(&s->rx_fifo)) { >>> + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; >>> + } >>> + break; >>> + >>> + case R_SPI_MIS: >>> + update_mis(s); >>> + ret = s->regs[R_SPI_MIS]; >>> + break; >>> + >>> + default: >>> + if (addr < ARRAY_SIZE(s->regs)) { >>> + ret = s->regs[addr]; >>> + } else { >>> + qemu_log_mask(LOG_GUEST_ERROR, >>> + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, >>> + addr * 4); >>> >> >> Drop '\n' while calling qemu_log_mask(). > > Ok. > >> >> >> + } >>> + break; >>> + } >>> + >>> + DB_PRINT("addr=0x%" HWADDR_PRIx " = 0x%" PRIx32 "\n", addr * 4, ret); >>> + spi_update_irq(s); >>> + return ret; >>> +} >>> + >>> +static void assert_cs(MSF2SpiState *s) >>> +{ >>> + qemu_set_irq(s->cs_line, 0); >>> +} >>> + >>> +static void deassert_cs(MSF2SpiState *s) >>> +{ >>> + qemu_set_irq(s->cs_line, 1); >>> +} >>> + >>> +static void spi_flush_txfifo(MSF2SpiState *s) >>> +{ >>> + uint32_t tx; >>> + uint32_t rx; >>> + bool sps = !!(s->regs[R_SPI_CONTROL] & C_SPS); >>> + >>> + /* >>> + * Chip Select(CS) is automatically controlled by this controller. >>> + * If SPS bit is set in Control register then CS is asserted >>> + * until all the frames set in frame count of Control register are >>> + * transferred. If SPS is not set then CS pulses between frames. >>> + * Note that Slave Select register specifies which of the CS line >>> + * has to be controlled automatically by controller. Bits SS[7:1] >>> are for >>> + * masters in FPGA fabric since we model only Microcontroller >>> subsystem >>> + * of Smartfusion2 we control only one CS(SS[0]) line. >>> + */ >>> + while (!fifo32_is_empty(&s->tx_fifo) && s->frame_count) { >>> + assert_cs(s); >>> + >>> + s->regs[R_SPI_STATUS] &= ~TXDONE; >>> + s->regs[R_SPI_STATUS] &= ~RXRDY; >>> + >>> + tx = fifo32_pop(&s->tx_fifo); >>> + DB_PRINT("data tx:0x%" PRIx32 "\n", tx); >>> + rx = ssi_transfer(s->spi, tx); >>> + DB_PRINT("data rx:0x%" PRIx32 "\n", rx); >>> + >>> + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { >>> + s->regs[R_SPI_STATUS] |= RXCHOVRF; >>> + s->regs[R_SPI_RIS] |= RXCHOVRF; >>> + } else { >>> + fifo32_push(&s->rx_fifo, rx); >>> + s->regs[R_SPI_STATUS] &= ~S_RXFIFOEMP; >>> + if (fifo32_num_used(&s->rx_fifo) == (s->fifo_depth - 1)) { >>> + s->regs[R_SPI_STATUS] |= S_RXFIFOFULNXT; >>> + } >>> + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { >>> + s->regs[R_SPI_STATUS] |= S_RXFIFOFUL; >>> + } >>> + } >>> + s->frame_count--; >>> + if (!sps) { >>> + deassert_cs(s); >>> + assert_cs(s); >>> + } >>> + } >>> + >>> + if (!sps) { >>> + deassert_cs(s); >>> + } >>> + >>> + if (!s->frame_count) { >>> + s->frame_count = (s->regs[R_SPI_CONTROL] & FMCOUNT_MASK) >> >>> + FMCOUNT_SHIFT; >>> + if (sps) { >>> + deassert_cs(s); >>> + } >>> + s->regs[R_SPI_RIS] |= TXDONE; >>> + s->regs[R_SPI_RIS] |= RXRDY; >>> + s->regs[R_SPI_STATUS] |= TXDONE; >>> + s->regs[R_SPI_STATUS] |= RXRDY; >>> + } >>> +} >>> + >>> +static void spi_write(void *opaque, hwaddr addr, >>> + uint64_t val64, unsigned int size) >>> +{ >>> + MSF2SpiState *s = opaque; >>> + uint32_t value = val64; >>> + >>> + DB_PRINT("addr=0x%" HWADDR_PRIx " =0x%" PRIx32 "\n", addr, value); >>> + addr >>= 2; >>> + >>> + switch (addr) { >>> + case R_SPI_TX: >>> + /* adding to already full FIFO */ >>> + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { >>> + break; >>> + } >>> + s->regs[R_SPI_STATUS] &= ~S_TXFIFOEMP; >>> + fifo32_push(&s->tx_fifo, value); >>> + if (fifo32_num_used(&s->tx_fifo) == (s->fifo_depth - 1)) { >>> + s->regs[R_SPI_STATUS] |= S_TXFIFOFULNXT; >>> + } >>> + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { >>> + s->regs[R_SPI_STATUS] |= S_TXFIFOFUL; >>> + } >>> + if (s->enabled) { >>> + spi_flush_txfifo(s); >>> + } >>> + break; >>> + >>> + case R_SPI_CONTROL: >>> + s->regs[R_SPI_CONTROL] = value; >>> + if (value & C_BIGFIFO) { >>> + set_fifodepth(s); >>> + } else { >>> + s->fifo_depth = 4; >>> + } >>> + if (value & C_ENABLE) { >>> + s->enabled = true; >>> + } else { >>> + s->enabled = false; >>> + } >>> + s->frame_count = (value & FMCOUNT_MASK) >> FMCOUNT_SHIFT; >>> + if (value & C_RESET) { >>> + msf2_spi_do_reset(s); >>> + } >>> + break; >>> + >>> + case R_SPI_DFSIZE: >>> + if (s->enabled) { >>> + break; >>> + } >>> + s->regs[R_SPI_DFSIZE] = value; >>> + break; >>> + >>> + case R_SPI_INTCLR: >>> + s->regs[R_SPI_INTCLR] = value; >>> + if (value & TXDONE) { >>> + s->regs[R_SPI_RIS] &= ~TXDONE; >>> + } >>> + if (value & RXRDY) { >>> + s->regs[R_SPI_RIS] &= ~RXRDY; >>> + } >>> + if (value & RXCHOVRF) { >>> + s->regs[R_SPI_RIS] &= ~RXCHOVRF; >>> + } >>> + break; >>> + >>> + case R_SPI_MIS: >>> + case R_SPI_STATUS: >>> + case R_SPI_RIS: >>> + break; >>> + >>> + default: >>> + if (addr < ARRAY_SIZE(s->regs)) { >>> + s->regs[addr] = value; >>> + } else { >>> + qemu_log_mask(LOG_GUEST_ERROR, >>> + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, >>> + addr * 4); >>> + } >>> + break; >>> + } >>> + >>> + spi_update_irq(s); >>> +} >>> + >>> +static const MemoryRegionOps spi_ops = { >>> + .read = spi_read, >>> + .write = spi_write, >>> + .endianness = DEVICE_NATIVE_ENDIAN, >>> + .valid = { >>> + .min_access_size = 4, >>> + .max_access_size = 4 >>> + } >>> +}; >>> + >>> +static void msf2_spi_realize(DeviceState *dev, Error **errp) >>> +{ >>> + MSF2SpiState *s = MSF2_SPI(dev); >>> + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); >>> + >>> + DB_PRINT("\n"); >>> + >>> + s->spi = ssi_create_bus(dev, "spi0"); >>> + >>> + sysbus_init_irq(sbd, &s->irq); >>> + ssi_auto_connect_slaves(dev, &s->cs_line, s->spi); >>> + sysbus_init_irq(sbd, &s->cs_line); >>> + >>> + memory_region_init_io(&s->mmio, OBJECT(s), &spi_ops, s, >>> + TYPE_MSF2_SPI, R_SPI_MAX * 4); >>> + sysbus_init_mmio(sbd, &s->mmio); >>> + >>> + fifo32_create(&s->tx_fifo, FIFO_CAPACITY); >>> + fifo32_create(&s->rx_fifo, FIFO_CAPACITY); >>> +} >>> + >>> +static const VMStateDescription vmstate_msf2_spi = { >>> + .name = TYPE_MSF2_SPI, >>> + .version_id = 1, >>> + .minimum_version_id = 1, >>> + .fields = (VMStateField[]) { >>> + VMSTATE_FIFO32(tx_fifo, MSF2SpiState), >>> + VMSTATE_FIFO32(rx_fifo, MSF2SpiState), >>> + VMSTATE_UINT32_ARRAY(regs, MSF2SpiState, R_SPI_MAX), >>> + VMSTATE_END_OF_LIST() >>> + } >>> +}; >>> + >>> +static void msf2_spi_class_init(ObjectClass *klass, void *data) >>> +{ >>> + DeviceClass *dc = DEVICE_CLASS(klass); >>> + >>> + dc->realize = msf2_spi_realize; >>> + dc->reset = msf2_spi_reset; >>> + dc->vmsd = &vmstate_msf2_spi; >>> +} >>> + >>> +static const TypeInfo msf2_spi_info = { >>> + .name = TYPE_MSF2_SPI, >>> + .parent = TYPE_SYS_BUS_DEVICE, >>> + .instance_size = sizeof(MSF2SpiState), >>> + .class_init = msf2_spi_class_init, >>> +}; >>> + >>> +static void msf2_spi_register_types(void) >>> +{ >>> + type_register_static(&msf2_spi_info); >>> +} >>> + >>> +type_init(msf2_spi_register_types) >>> diff --git a/include/hw/ssi/msf2-spi.h b/include/hw/ssi/msf2-spi.h >>> new file mode 100644 >>> index 0000000..585edde >>> --- /dev/null >>> +++ b/include/hw/ssi/msf2-spi.h >>> @@ -0,0 +1,105 @@ >>> +/* >>> + * Microsemi SmartFusion2 SPI >>> + * >>> + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> >>> + * >>> + * Permission is hereby granted, free of charge, to any person obtaining >>> a copy >>> + * of this software and associated documentation files (the "Software"), >>> to deal >>> + * in the Software without restriction, including without limitation the >>> rights >>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or >>> sell >>> + * copies of the Software, and to permit persons to whom the Software is >>> + * furnished to do so, subject to the following conditions: >>> + * >>> + * The above copyright notice and this permission notice shall be >>> included in >>> + * all copies or substantial portions of the Software. >>> + * >>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >>> EXPRESS OR >>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF >>> MERCHANTABILITY, >>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT >>> SHALL >>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR >>> OTHER >>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, >>> ARISING FROM, >>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER >>> DEALINGS IN >>> + * THE SOFTWARE. >>> + */ >>> + >>> +#ifndef HW_MSF2_SPI_H >>> +#define HW_MSF2_SPI_H >>> + >>> +#include "qemu/osdep.h" >>> +#include "hw/sysbus.h" >>> +#include "hw/hw.h" >>> +#include "hw/ssi/ssi.h" >>> +#include "qemu/fifo32.h" >>> +#include "sysemu/sysemu.h" >>> +#include "qemu/log.h" >>> + >>> +#define FIFO_CAPACITY 32 >>> +#define FIFO_CAPACITY 32 >>> + >>> +#define R_SPI_CONTROL 0 >>> +#define R_SPI_DFSIZE 1 >>> +#define R_SPI_STATUS 2 >>> +#define R_SPI_INTCLR 3 >>> +#define R_SPI_RX 4 >>> +#define R_SPI_TX 5 >>> +#define R_SPI_CLKGEN 6 >>> +#define R_SPI_SS 7 >>> +#define R_SPI_MIS 8 >>> +#define R_SPI_RIS 9 >>> +#define R_SPI_STAT8 15 >>> +#define R_SPI_MAX 16 >>> + >>> +#define S_RXFIFOFUL (1 << 4) >>> +#define S_RXFIFOFULNXT (1 << 5) >>> +#define S_RXFIFOEMP (1 << 6) >>> +#define S_RXFIFOEMPNXT (1 << 7) >>> +#define S_TXFIFOFUL (1 << 8) >>> +#define S_TXFIFOFULNXT (1 << 9) >>> +#define S_TXFIFOEMP (1 << 10) >>> +#define S_TXFIFOEMPNXT (1 << 11) >>> +#define S_FRAMESTART (1 << 12) >>> +#define S_SSEL (1 << 13) >>> +#define S_ACTIVE (1 << 14) >>> + >>> +#define C_ENABLE (1 << 0) >>> +#define C_MODE (1 << 1) >>> +#define C_INTRXDATA (1 << 4) >>> +#define C_INTTXDATA (1 << 5) >>> +#define C_INTRXOVRFLO (1 << 6) >>> +#define C_SPS (1 << 26) >>> +#define C_BIGFIFO (1 << 29) >>> +#define C_RESET (1 << 31) >>> + >>> +#define FRAMESZ_MASK 0x1F >>> +#define FMCOUNT_MASK 0x00FFFF00 >>> +#define FMCOUNT_SHIFT 8 >>> + >>> +#define TXDONE (1 << 0) >>> +#define RXRDY (1 << 1) >>> +#define RXCHOVRF (1 << 2) >>> + >>> +#define TYPE_MSF2_SPI "msf2-spi" >>> +#define MSF2_SPI(obj) OBJECT_CHECK(MSF2SpiState, (obj), TYPE_MSF2_SPI) >>> + >>> +typedef struct MSF2SpiState { >>> + SysBusDevice parent_obj; >>> + >>> + MemoryRegion mmio; >>> + >>> + qemu_irq irq; >>> + >>> + qemu_irq cs_line; >>> + >>> + SSIBus *spi; >>> + >>> + Fifo32 rx_fifo; >>> + Fifo32 tx_fifo; >>> + >>> + int fifo_depth; >>> + uint32_t frame_count; >>> + bool enabled; >>> + >>> + uint32_t regs[R_SPI_MAX]; >>> +} MSF2SpiState; >>> + >>> +#endif /* HW_MSF2_SPI_H */ >>> >>> >> Regards, >> >> Phil. >> > Thanks, > Sundeep >
diff --git a/hw/ssi/Makefile.objs b/hw/ssi/Makefile.objs index 487add2..3105c4b 100644 --- a/hw/ssi/Makefile.objs +++ b/hw/ssi/Makefile.objs @@ -4,6 +4,7 @@ common-obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o common-obj-$(CONFIG_XILINX_SPIPS) += xilinx_spips.o common-obj-$(CONFIG_ASPEED_SOC) += aspeed_smc.o common-obj-$(CONFIG_STM32F2XX_SPI) += stm32f2xx_spi.o +common-obj-$(CONFIG_MSF2) += msf2-spi.o obj-$(CONFIG_OMAP) += omap_spi.o obj-$(CONFIG_IMX) += imx_spi.o diff --git a/hw/ssi/msf2-spi.c b/hw/ssi/msf2-spi.c new file mode 100644 index 0000000..2059ed9 --- /dev/null +++ b/hw/ssi/msf2-spi.c @@ -0,0 +1,378 @@ +/* + * SPI controller model of Microsemi SmartFusion2. + * + * Copyright (C) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw/ssi/msf2-spi.h" + +#ifndef MSF2_SPI_ERR_DEBUG +#define MSF2_SPI_ERR_DEBUG 0 +#endif + +#define DB_PRINT_L(lvl, fmt, args...) do { \ + if (MSF2_SPI_ERR_DEBUG >= lvl) { \ + qemu_log("%s: " fmt, __func__, ## args); \ + } \ +} while (0); + +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args) + +static void txfifo_reset(MSF2SpiState *s) +{ + fifo32_reset(&s->tx_fifo); + + s->regs[R_SPI_STATUS] &= ~S_TXFIFOFUL; + s->regs[R_SPI_STATUS] |= S_TXFIFOEMP; +} + +static void rxfifo_reset(MSF2SpiState *s) +{ + fifo32_reset(&s->rx_fifo); + + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; +} + +static void set_fifodepth(MSF2SpiState *s) +{ + int size = s->regs[R_SPI_DFSIZE] & FRAMESZ_MASK; + + if (0 <= size && size <= 8) { + s->fifo_depth = 32; + } + if (9 <= size && size <= 16) { + s->fifo_depth = 16; + } + if (17 <= size && size <= 32) { + s->fifo_depth = 8; + } +} + +static void msf2_spi_do_reset(MSF2SpiState *s) +{ + memset(s->regs, 0, sizeof s->regs); + s->regs[R_SPI_CONTROL] = 0x80000102; + s->regs[R_SPI_DFSIZE] = 0x4; + s->regs[R_SPI_STATUS] = 0x2440; + s->regs[R_SPI_CLKGEN] = 0x7; + s->regs[R_SPI_STAT8] = 0x7; + s->regs[R_SPI_RIS] = 0x0; + + s->fifo_depth = 4; + s->frame_count = 1; + s->enabled = false; + + rxfifo_reset(s); + txfifo_reset(s); +} + +static void update_mis(MSF2SpiState *s) +{ + uint32_t reg = s->regs[R_SPI_CONTROL]; + uint32_t tmp; + + /* + * form the Control register interrupt enable bits + * same as RIS, MIS and Interrupt clear registers for simplicity + */ + tmp = ((reg & C_INTRXOVRFLO) >> 4) | ((reg & C_INTRXDATA) >> 3) | + ((reg & C_INTTXDATA) >> 5); + s->regs[R_SPI_MIS] |= tmp & s->regs[R_SPI_RIS]; +} + +static void spi_update_irq(MSF2SpiState *s) +{ + int irq; + + update_mis(s); + irq = !!(s->regs[R_SPI_MIS]); + + qemu_set_irq(s->irq, irq); +} + +static void msf2_spi_reset(DeviceState *d) +{ + msf2_spi_do_reset(MSF2_SPI(d)); +} + +static uint64_t +spi_read(void *opaque, hwaddr addr, unsigned int size) +{ + MSF2SpiState *s = opaque; + uint32_t ret = 0; + + addr >>= 2; + switch (addr) { + case R_SPI_RX: + s->regs[R_SPI_STATUS] &= ~S_RXFIFOFUL; + s->regs[R_SPI_STATUS] &= ~RXCHOVRF; + ret = fifo32_pop(&s->rx_fifo); + if (fifo32_is_empty(&s->rx_fifo)) { + s->regs[R_SPI_STATUS] |= S_RXFIFOEMP; + } + break; + + case R_SPI_MIS: + update_mis(s); + ret = s->regs[R_SPI_MIS]; + break; + + default: + if (addr < ARRAY_SIZE(s->regs)) { + ret = s->regs[addr]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + } + break; + } + + DB_PRINT("addr=0x%" HWADDR_PRIx " = 0x%" PRIx32 "\n", addr * 4, ret); + spi_update_irq(s); + return ret; +} + +static void assert_cs(MSF2SpiState *s) +{ + qemu_set_irq(s->cs_line, 0); +} + +static void deassert_cs(MSF2SpiState *s) +{ + qemu_set_irq(s->cs_line, 1); +} + +static void spi_flush_txfifo(MSF2SpiState *s) +{ + uint32_t tx; + uint32_t rx; + bool sps = !!(s->regs[R_SPI_CONTROL] & C_SPS); + + /* + * Chip Select(CS) is automatically controlled by this controller. + * If SPS bit is set in Control register then CS is asserted + * until all the frames set in frame count of Control register are + * transferred. If SPS is not set then CS pulses between frames. + * Note that Slave Select register specifies which of the CS line + * has to be controlled automatically by controller. Bits SS[7:1] are for + * masters in FPGA fabric since we model only Microcontroller subsystem + * of Smartfusion2 we control only one CS(SS[0]) line. + */ + while (!fifo32_is_empty(&s->tx_fifo) && s->frame_count) { + assert_cs(s); + + s->regs[R_SPI_STATUS] &= ~TXDONE; + s->regs[R_SPI_STATUS] &= ~RXRDY; + + tx = fifo32_pop(&s->tx_fifo); + DB_PRINT("data tx:0x%" PRIx32 "\n", tx); + rx = ssi_transfer(s->spi, tx); + DB_PRINT("data rx:0x%" PRIx32 "\n", rx); + + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= RXCHOVRF; + s->regs[R_SPI_RIS] |= RXCHOVRF; + } else { + fifo32_push(&s->rx_fifo, rx); + s->regs[R_SPI_STATUS] &= ~S_RXFIFOEMP; + if (fifo32_num_used(&s->rx_fifo) == (s->fifo_depth - 1)) { + s->regs[R_SPI_STATUS] |= S_RXFIFOFULNXT; + } + if (fifo32_num_used(&s->rx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_RXFIFOFUL; + } + } + s->frame_count--; + if (!sps) { + deassert_cs(s); + assert_cs(s); + } + } + + if (!sps) { + deassert_cs(s); + } + + if (!s->frame_count) { + s->frame_count = (s->regs[R_SPI_CONTROL] & FMCOUNT_MASK) >> + FMCOUNT_SHIFT; + if (sps) { + deassert_cs(s); + } + s->regs[R_SPI_RIS] |= TXDONE; + s->regs[R_SPI_RIS] |= RXRDY; + s->regs[R_SPI_STATUS] |= TXDONE; + s->regs[R_SPI_STATUS] |= RXRDY; + } +} + +static void spi_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + MSF2SpiState *s = opaque; + uint32_t value = val64; + + DB_PRINT("addr=0x%" HWADDR_PRIx " =0x%" PRIx32 "\n", addr, value); + addr >>= 2; + + switch (addr) { + case R_SPI_TX: + /* adding to already full FIFO */ + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { + break; + } + s->regs[R_SPI_STATUS] &= ~S_TXFIFOEMP; + fifo32_push(&s->tx_fifo, value); + if (fifo32_num_used(&s->tx_fifo) == (s->fifo_depth - 1)) { + s->regs[R_SPI_STATUS] |= S_TXFIFOFULNXT; + } + if (fifo32_num_used(&s->tx_fifo) == s->fifo_depth) { + s->regs[R_SPI_STATUS] |= S_TXFIFOFUL; + } + if (s->enabled) { + spi_flush_txfifo(s); + } + break; + + case R_SPI_CONTROL: + s->regs[R_SPI_CONTROL] = value; + if (value & C_BIGFIFO) { + set_fifodepth(s); + } else { + s->fifo_depth = 4; + } + if (value & C_ENABLE) { + s->enabled = true; + } else { + s->enabled = false; + } + s->frame_count = (value & FMCOUNT_MASK) >> FMCOUNT_SHIFT; + if (value & C_RESET) { + msf2_spi_do_reset(s); + } + break; + + case R_SPI_DFSIZE: + if (s->enabled) { + break; + } + s->regs[R_SPI_DFSIZE] = value; + break; + + case R_SPI_INTCLR: + s->regs[R_SPI_INTCLR] = value; + if (value & TXDONE) { + s->regs[R_SPI_RIS] &= ~TXDONE; + } + if (value & RXRDY) { + s->regs[R_SPI_RIS] &= ~RXRDY; + } + if (value & RXCHOVRF) { + s->regs[R_SPI_RIS] &= ~RXCHOVRF; + } + break; + + case R_SPI_MIS: + case R_SPI_STATUS: + case R_SPI_RIS: + break; + + default: + if (addr < ARRAY_SIZE(s->regs)) { + s->regs[addr] = value; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, + addr * 4); + } + break; + } + + spi_update_irq(s); +} + +static const MemoryRegionOps spi_ops = { + .read = spi_read, + .write = spi_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4 + } +}; + +static void msf2_spi_realize(DeviceState *dev, Error **errp) +{ + MSF2SpiState *s = MSF2_SPI(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + + DB_PRINT("\n"); + + s->spi = ssi_create_bus(dev, "spi0"); + + sysbus_init_irq(sbd, &s->irq); + ssi_auto_connect_slaves(dev, &s->cs_line, s->spi); + sysbus_init_irq(sbd, &s->cs_line); + + memory_region_init_io(&s->mmio, OBJECT(s), &spi_ops, s, + TYPE_MSF2_SPI, R_SPI_MAX * 4); + sysbus_init_mmio(sbd, &s->mmio); + + fifo32_create(&s->tx_fifo, FIFO_CAPACITY); + fifo32_create(&s->rx_fifo, FIFO_CAPACITY); +} + +static const VMStateDescription vmstate_msf2_spi = { + .name = TYPE_MSF2_SPI, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_FIFO32(tx_fifo, MSF2SpiState), + VMSTATE_FIFO32(rx_fifo, MSF2SpiState), + VMSTATE_UINT32_ARRAY(regs, MSF2SpiState, R_SPI_MAX), + VMSTATE_END_OF_LIST() + } +}; + +static void msf2_spi_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = msf2_spi_realize; + dc->reset = msf2_spi_reset; + dc->vmsd = &vmstate_msf2_spi; +} + +static const TypeInfo msf2_spi_info = { + .name = TYPE_MSF2_SPI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(MSF2SpiState), + .class_init = msf2_spi_class_init, +}; + +static void msf2_spi_register_types(void) +{ + type_register_static(&msf2_spi_info); +} + +type_init(msf2_spi_register_types) diff --git a/include/hw/ssi/msf2-spi.h b/include/hw/ssi/msf2-spi.h new file mode 100644 index 0000000..585edde --- /dev/null +++ b/include/hw/ssi/msf2-spi.h @@ -0,0 +1,105 @@ +/* + * Microsemi SmartFusion2 SPI + * + * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef HW_MSF2_SPI_H +#define HW_MSF2_SPI_H + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "hw/hw.h" +#include "hw/ssi/ssi.h" +#include "qemu/fifo32.h" +#include "sysemu/sysemu.h" +#include "qemu/log.h" + +#define FIFO_CAPACITY 32 +#define FIFO_CAPACITY 32 + +#define R_SPI_CONTROL 0 +#define R_SPI_DFSIZE 1 +#define R_SPI_STATUS 2 +#define R_SPI_INTCLR 3 +#define R_SPI_RX 4 +#define R_SPI_TX 5 +#define R_SPI_CLKGEN 6 +#define R_SPI_SS 7 +#define R_SPI_MIS 8 +#define R_SPI_RIS 9 +#define R_SPI_STAT8 15 +#define R_SPI_MAX 16 + +#define S_RXFIFOFUL (1 << 4) +#define S_RXFIFOFULNXT (1 << 5) +#define S_RXFIFOEMP (1 << 6) +#define S_RXFIFOEMPNXT (1 << 7) +#define S_TXFIFOFUL (1 << 8) +#define S_TXFIFOFULNXT (1 << 9) +#define S_TXFIFOEMP (1 << 10) +#define S_TXFIFOEMPNXT (1 << 11) +#define S_FRAMESTART (1 << 12) +#define S_SSEL (1 << 13) +#define S_ACTIVE (1 << 14) + +#define C_ENABLE (1 << 0) +#define C_MODE (1 << 1) +#define C_INTRXDATA (1 << 4) +#define C_INTTXDATA (1 << 5) +#define C_INTRXOVRFLO (1 << 6) +#define C_SPS (1 << 26) +#define C_BIGFIFO (1 << 29) +#define C_RESET (1 << 31) + +#define FRAMESZ_MASK 0x1F +#define FMCOUNT_MASK 0x00FFFF00 +#define FMCOUNT_SHIFT 8 + +#define TXDONE (1 << 0) +#define RXRDY (1 << 1) +#define RXCHOVRF (1 << 2) + +#define TYPE_MSF2_SPI "msf2-spi" +#define MSF2_SPI(obj) OBJECT_CHECK(MSF2SpiState, (obj), TYPE_MSF2_SPI) + +typedef struct MSF2SpiState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + qemu_irq irq; + + qemu_irq cs_line; + + SSIBus *spi; + + Fifo32 rx_fifo; + Fifo32 tx_fifo; + + int fifo_depth; + uint32_t frame_count; + bool enabled; + + uint32_t regs[R_SPI_MAX]; +} MSF2SpiState; + +#endif /* HW_MSF2_SPI_H */
Modelled Microsemi's Smartfusion2 SPI controller. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> --- hw/ssi/Makefile.objs | 1 + hw/ssi/msf2-spi.c | 378 ++++++++++++++++++++++++++++++++++++++++++++++ include/hw/ssi/msf2-spi.h | 105 +++++++++++++ 3 files changed, 484 insertions(+) create mode 100644 hw/ssi/msf2-spi.c create mode 100644 include/hw/ssi/msf2-spi.h