diff mbox

[v6,4/5] generic/432: Add a copy test for overwriting small amounts of data

Message ID 20170510174628.22895-5-Anna.Schumaker@Netapp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Schumaker, Anna May 10, 2017, 5:46 p.m. UTC
This test is similar to 345, except that it copies one byte at a time to
make sure that this case works as expected.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
---
 tests/generic/432     | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/432.out | 17 ++++++++++
 tests/generic/group   |  1 +
 3 files changed, 105 insertions(+)
 create mode 100755 tests/generic/432
 create mode 100644 tests/generic/432.out

Comments

Darrick J. Wong May 10, 2017, 6:37 p.m. UTC | #1
On Wed, May 10, 2017 at 01:46:27PM -0400, Anna Schumaker wrote:
> This test is similar to 345, except that it copies one byte at a time to

345?  Or is that now 431?  Perhaps amend the commit message to "This
test is similar to the previous one, except..."?

Otherwise, the tests run ok on xfs and ext4 and look ok, so for the whole set
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>

--D

> make sure that this case works as expected.
> 
> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
> ---
>  tests/generic/432     | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/generic/432.out | 17 ++++++++++
>  tests/generic/group   |  1 +
>  3 files changed, 105 insertions(+)
>  create mode 100755 tests/generic/432
>  create mode 100644 tests/generic/432.out
> 
> diff --git a/tests/generic/432 b/tests/generic/432
> new file mode 100755
> index 00000000..9cd899ce
> --- /dev/null
> +++ b/tests/generic/432
> @@ -0,0 +1,87 @@
> +#!/bin/bash
> +# FS QA Test No. 432
> +#
> +# Tests vfs_copy_file_range():
> +#   - Copy a small file
> +#   - Use copy to swap data at beginning and end
> +#   - Use copy to swap data in the middle
> +#   - Use copy to swap data in a small file
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Netapp, Inc. All rights reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -rf $tmp.*
> +}
> +
> +# get standard environment
> +. common/rc
> +. common/filter
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +
> +_require_xfs_io_command "copy_range"
> +_require_test
> +
> +testdir=$TEST_DIR/test-$seq
> +rm -rf $testdir
> +mkdir $testdir
> +rm -f $seqres.full
> +
> +echo "Create the original file and then copy"
> +echo -n "abcde" > $testdir/file
> +$XFS_IO_PROG -f -c "copy_range $testdir/file" "$testdir/copy" 2>&1
> +cmp $testdir/file $testdir/copy
> +echo "Original md5sums:"
> +md5sum $testdir/{file,copy} | _filter_test_dir
> +
> +echo "Swap beginning and end of original file"
> +$XFS_IO_PROG -f -c "copy_range -s 0 -d 4 -l 1 $testdir/file" "$testdir/copy" 2>&1
> +$XFS_IO_PROG -f -c "copy_range -s 4 -d 0 -l 1 $testdir/file" "$testdir/copy" 2>&1
> +echo -n "ebcda" | cmp $testdir/copy
> +echo "md5sums after swapping beginning and end:"
> +md5sum $testdir/{file,copy} | _filter_test_dir
> +
> +echo "Swap middle parts of original file"
> +$XFS_IO_PROG -f -c "copy_range -s 1 -d 3 -l 1 $testdir/file" "$testdir/copy" 2>&1
> +$XFS_IO_PROG -f -c "copy_range -s 3 -d 1 -l 1 $testdir/file" "$testdir/copy" 2>&1
> +echo -n "edcba" | cmp $testdir/copy
> +echo "md5sums after swapping middle:"
> +md5sum $testdir/{file,copy} | _filter_test_dir
> +
> +echo "Copy tail of original file onto copy"
> +$XFS_IO_PROG -f -c "copy_range -s 1 -d 3 -l 4 $testdir/file" "$testdir/copy" 2>&1
> +echo -n "edcbcde" | cmp $testdir/copy
> +echo "md5sums after copying tail:"
> +md5sum $testdir/{file,copy} | _filter_test_dir
> +
> +#success, all done
> +status=0
> +exit
> diff --git a/tests/generic/432.out b/tests/generic/432.out
> new file mode 100644
> index 00000000..eec84392
> --- /dev/null
> +++ b/tests/generic/432.out
> @@ -0,0 +1,17 @@
> +QA output created by 432
> +Create the original file and then copy
> +Original md5sums:
> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/copy
> +Swap beginning and end of original file
> +md5sums after swapping beginning and end:
> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
> +32db1f6d06d15f7e38e1ab1c69da498a  TEST_DIR/test-432/copy
> +Swap middle parts of original file
> +md5sums after swapping middle:
> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
> +295228f3d82d344bbcf2f0030519c2ea  TEST_DIR/test-432/copy
> +Copy tail of original file onto copy
> +md5sums after copying tail:
> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
> +0c4aac952f72fa078e2f8419aca70b28  TEST_DIR/test-432/copy
> diff --git a/tests/generic/group b/tests/generic/group
> index 608c45b2..43aac9fd 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -434,3 +434,4 @@
>  429 auto quick copy
>  430 auto quick copy
>  431 auto quick copy
> +432 auto quick copy
> -- 
> 2.12.2
> 
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Schumaker, Anna May 10, 2017, 6:39 p.m. UTC | #2
On 05/10/2017 02:37 PM, Darrick J. Wong wrote:
> On Wed, May 10, 2017 at 01:46:27PM -0400, Anna Schumaker wrote:
>> This test is similar to 345, except that it copies one byte at a time to
> 
> 345?  Or is that now 431?  Perhaps amend the commit message to "This
> test is similar to the previous one, except..."?

Yeah, I forgot to update that :(   It's supposed to be for the previous test, so that's probably the best wording to use.

Anna

> 
> Otherwise, the tests run ok on xfs and ext4 and look ok, so for the whole set
> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
> 
> --D
> 
>> make sure that this case works as expected.
>>
>> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
>> ---
>>  tests/generic/432     | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++
>>  tests/generic/432.out | 17 ++++++++++
>>  tests/generic/group   |  1 +
>>  3 files changed, 105 insertions(+)
>>  create mode 100755 tests/generic/432
>>  create mode 100644 tests/generic/432.out
>>
>> diff --git a/tests/generic/432 b/tests/generic/432
>> new file mode 100755
>> index 00000000..9cd899ce
>> --- /dev/null
>> +++ b/tests/generic/432
>> @@ -0,0 +1,87 @@
>> +#!/bin/bash
>> +# FS QA Test No. 432
>> +#
>> +# Tests vfs_copy_file_range():
>> +#   - Copy a small file
>> +#   - Use copy to swap data at beginning and end
>> +#   - Use copy to swap data in the middle
>> +#   - Use copy to swap data in a small file
>> +#-----------------------------------------------------------------------
>> +# Copyright (c) 2017 Netapp, Inc. All rights reserved.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation.
>> +#
>> +# This program is distributed in the hope that it would be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write the Free Software Foundation,
>> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
>> +#-----------------------------------------------------------------------
>> +#
>> +
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +here=`pwd`
>> +tmp=/tmp/$$
>> +status=1    # failure is the default!
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
>> +	cd /
>> +	rm -rf $tmp.*
>> +}
>> +
>> +# get standard environment
>> +. common/rc
>> +. common/filter
>> +
>> +# real QA test starts here
>> +_supported_fs generic
>> +_supported_os Linux
>> +
>> +_require_xfs_io_command "copy_range"
>> +_require_test
>> +
>> +testdir=$TEST_DIR/test-$seq
>> +rm -rf $testdir
>> +mkdir $testdir
>> +rm -f $seqres.full
>> +
>> +echo "Create the original file and then copy"
>> +echo -n "abcde" > $testdir/file
>> +$XFS_IO_PROG -f -c "copy_range $testdir/file" "$testdir/copy" 2>&1
>> +cmp $testdir/file $testdir/copy
>> +echo "Original md5sums:"
>> +md5sum $testdir/{file,copy} | _filter_test_dir
>> +
>> +echo "Swap beginning and end of original file"
>> +$XFS_IO_PROG -f -c "copy_range -s 0 -d 4 -l 1 $testdir/file" "$testdir/copy" 2>&1
>> +$XFS_IO_PROG -f -c "copy_range -s 4 -d 0 -l 1 $testdir/file" "$testdir/copy" 2>&1
>> +echo -n "ebcda" | cmp $testdir/copy
>> +echo "md5sums after swapping beginning and end:"
>> +md5sum $testdir/{file,copy} | _filter_test_dir
>> +
>> +echo "Swap middle parts of original file"
>> +$XFS_IO_PROG -f -c "copy_range -s 1 -d 3 -l 1 $testdir/file" "$testdir/copy" 2>&1
>> +$XFS_IO_PROG -f -c "copy_range -s 3 -d 1 -l 1 $testdir/file" "$testdir/copy" 2>&1
>> +echo -n "edcba" | cmp $testdir/copy
>> +echo "md5sums after swapping middle:"
>> +md5sum $testdir/{file,copy} | _filter_test_dir
>> +
>> +echo "Copy tail of original file onto copy"
>> +$XFS_IO_PROG -f -c "copy_range -s 1 -d 3 -l 4 $testdir/file" "$testdir/copy" 2>&1
>> +echo -n "edcbcde" | cmp $testdir/copy
>> +echo "md5sums after copying tail:"
>> +md5sum $testdir/{file,copy} | _filter_test_dir
>> +
>> +#success, all done
>> +status=0
>> +exit
>> diff --git a/tests/generic/432.out b/tests/generic/432.out
>> new file mode 100644
>> index 00000000..eec84392
>> --- /dev/null
>> +++ b/tests/generic/432.out
>> @@ -0,0 +1,17 @@
>> +QA output created by 432
>> +Create the original file and then copy
>> +Original md5sums:
>> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
>> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/copy
>> +Swap beginning and end of original file
>> +md5sums after swapping beginning and end:
>> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
>> +32db1f6d06d15f7e38e1ab1c69da498a  TEST_DIR/test-432/copy
>> +Swap middle parts of original file
>> +md5sums after swapping middle:
>> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
>> +295228f3d82d344bbcf2f0030519c2ea  TEST_DIR/test-432/copy
>> +Copy tail of original file onto copy
>> +md5sums after copying tail:
>> +ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
>> +0c4aac952f72fa078e2f8419aca70b28  TEST_DIR/test-432/copy
>> diff --git a/tests/generic/group b/tests/generic/group
>> index 608c45b2..43aac9fd 100644
>> --- a/tests/generic/group
>> +++ b/tests/generic/group
>> @@ -434,3 +434,4 @@
>>  429 auto quick copy
>>  430 auto quick copy
>>  431 auto quick copy
>> +432 auto quick copy
>> -- 
>> 2.12.2
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe fstests" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Eryu Guan May 11, 2017, 7:27 a.m. UTC | #3
On Wed, May 10, 2017 at 02:39:46PM -0400, Anna Schumaker wrote:
> 
> 
> On 05/10/2017 02:37 PM, Darrick J. Wong wrote:
> > On Wed, May 10, 2017 at 01:46:27PM -0400, Anna Schumaker wrote:
> >> This test is similar to 345, except that it copies one byte at a time to
> > 
> > 345?  Or is that now 431?  Perhaps amend the commit message to "This
> > test is similar to the previous one, except..."?
> 
> Yeah, I forgot to update that :(   It's supposed to be for the previous test, so that's probably the best wording to use.

I can fix it at commit time. Thanks for the tests! And thanks Darrick
for reviewing!

BTW, seq number should be dropped in summary line too, tests are always
re-numberd on commit anyway, "generic: Add copy to new file test" should
be fine :)

Thanks,
Eryu
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/tests/generic/432 b/tests/generic/432
new file mode 100755
index 00000000..9cd899ce
--- /dev/null
+++ b/tests/generic/432
@@ -0,0 +1,87 @@ 
+#!/bin/bash
+# FS QA Test No. 432
+#
+# Tests vfs_copy_file_range():
+#   - Copy a small file
+#   - Use copy to swap data at beginning and end
+#   - Use copy to swap data in the middle
+#   - Use copy to swap data in a small file
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Netapp, Inc. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -rf $tmp.*
+}
+
+# get standard environment
+. common/rc
+. common/filter
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+
+_require_xfs_io_command "copy_range"
+_require_test
+
+testdir=$TEST_DIR/test-$seq
+rm -rf $testdir
+mkdir $testdir
+rm -f $seqres.full
+
+echo "Create the original file and then copy"
+echo -n "abcde" > $testdir/file
+$XFS_IO_PROG -f -c "copy_range $testdir/file" "$testdir/copy" 2>&1
+cmp $testdir/file $testdir/copy
+echo "Original md5sums:"
+md5sum $testdir/{file,copy} | _filter_test_dir
+
+echo "Swap beginning and end of original file"
+$XFS_IO_PROG -f -c "copy_range -s 0 -d 4 -l 1 $testdir/file" "$testdir/copy" 2>&1
+$XFS_IO_PROG -f -c "copy_range -s 4 -d 0 -l 1 $testdir/file" "$testdir/copy" 2>&1
+echo -n "ebcda" | cmp $testdir/copy
+echo "md5sums after swapping beginning and end:"
+md5sum $testdir/{file,copy} | _filter_test_dir
+
+echo "Swap middle parts of original file"
+$XFS_IO_PROG -f -c "copy_range -s 1 -d 3 -l 1 $testdir/file" "$testdir/copy" 2>&1
+$XFS_IO_PROG -f -c "copy_range -s 3 -d 1 -l 1 $testdir/file" "$testdir/copy" 2>&1
+echo -n "edcba" | cmp $testdir/copy
+echo "md5sums after swapping middle:"
+md5sum $testdir/{file,copy} | _filter_test_dir
+
+echo "Copy tail of original file onto copy"
+$XFS_IO_PROG -f -c "copy_range -s 1 -d 3 -l 4 $testdir/file" "$testdir/copy" 2>&1
+echo -n "edcbcde" | cmp $testdir/copy
+echo "md5sums after copying tail:"
+md5sum $testdir/{file,copy} | _filter_test_dir
+
+#success, all done
+status=0
+exit
diff --git a/tests/generic/432.out b/tests/generic/432.out
new file mode 100644
index 00000000..eec84392
--- /dev/null
+++ b/tests/generic/432.out
@@ -0,0 +1,17 @@ 
+QA output created by 432
+Create the original file and then copy
+Original md5sums:
+ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
+ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/copy
+Swap beginning and end of original file
+md5sums after swapping beginning and end:
+ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
+32db1f6d06d15f7e38e1ab1c69da498a  TEST_DIR/test-432/copy
+Swap middle parts of original file
+md5sums after swapping middle:
+ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
+295228f3d82d344bbcf2f0030519c2ea  TEST_DIR/test-432/copy
+Copy tail of original file onto copy
+md5sums after copying tail:
+ab56b4d92b40713acc5af89985d4b786  TEST_DIR/test-432/file
+0c4aac952f72fa078e2f8419aca70b28  TEST_DIR/test-432/copy
diff --git a/tests/generic/group b/tests/generic/group
index 608c45b2..43aac9fd 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -434,3 +434,4 @@ 
 429 auto quick copy
 430 auto quick copy
 431 auto quick copy
+432 auto quick copy