[v3,1/4] ACPI: Add APEI GHES Table Generation support

Commit Message

Dongjiu Geng April 30, 2017, 5:35 a.m. UTC

This implements APEI GHES Table by passing the error cper info
to the guest via a fw_cfg_blob. After a CPER info is added, an
SEA/SEI exception will be injected into the guest OS.

Below is the table layout, the max number of error soure is 11,
which is classified by notification type.

etc/acpi/tables                 etc/hardware_errors

Comments

Laszlo Ersek May 12, 2017, 9 p.m. UTC | #1

On 04/30/17 07:35, Dongjiu Geng wrote:
> This implements APEI GHES Table by passing the error cper info
> to the guest via a fw_cfg_blob. After a CPER info is added, an
> SEA/SEI exception will be injected into the guest OS.
>
> Below is the table layout, the max number of error soure is 11,
> which is classified by notification type.
>
> etc/acpi/tables                 etc/hardware_errors
> ================     ==========================================
>                      +-----------+
> +--------------+     | address   |         +-> +--------------+
> |    HEST      +     | registers |         |   | Error Status |
> + +------------+     | +---------+         |   | Data Block 1 |
> | | GHES1      | --> | |address1 | --------+   | +------------+
> | | GHES2      | --> | |address2 | ------+     | |  CPER      |
> | | GHES3      | --> | |address3 | ----+ |     | |  CPER      |
> | |  ....      | --> | | ....... |     | |     | |  CPER      |
> | | GHES10     | --> | |address10| -+  | |     | |  CPER      |
> +-+------------+     +-+---------+  |  | |     +-+------------+
>                                     |  | |
>                                     |  | +---> +--------------+
>                                     |  |       | Error Status |
>                                     |  |       | Data Block 2 |
>                                     |  |       | +------------+
>                                     |  |       | |  CPER      |
>                                     |  |       | |  CPER      |
>                                     |  |       +-+------------+
>                                     |  |
>                                     |  +-----> +--------------+
>                                     |          | Error Status |
>                                     |          | Data Block 3 |
>                                     |          | +------------+
>                                     |          | |  CPER      |
>                                     |          +-+------------+
>                                     |            ...........
>                                     +--------> +--------------+
>                                                | Error Status |
>                                                | Data Block 10|
>                                                | +------------+
>                                                | |  CPER      |
>                                                | |  CPER      |
>                                                | |  CPER      |
>                                                +-+------------+
>
> Signed-off-by: Dongjiu Geng <[e-mail]>
> ---
>  default-configs/arm-softmmu.mak |   1 +
>  hw/acpi/Makefile.objs           |   1 +
>  hw/acpi/aml-build.c             |   2 +
>  hw/acpi/hest_ghes.c             | 203 +++++++++++++++++++++++++++++++++++
>  hw/arm/virt-acpi-build.c        |   6 ++
>  include/hw/acpi/acpi-defs.h     | 227 ++++++++++++++++++++++++++++++++++++++++
>  include/hw/acpi/aml-build.h     |   1 +
>  include/hw/acpi/hest_ghes.h     |  43 ++++++++
>  8 files changed, 484 insertions(+)
>  create mode 100644 hw/acpi/hest_ghes.c
>  create mode 100644 include/hw/acpi/hest_ghes.h

Disclaimer: I'm not an ACPI (or any kind of) QEMU maintainer, so I can
only share my personal opinion.

(1) This patch is too big. It should be split in two parts at least.

The first patch should contain the new ACPI structures and macros. The
second patch should contain the generation feature.

I'll reorder the diff in my response.

> diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
> index 4cc3630..27adede 100644
> --- a/include/hw/acpi/acpi-defs.h
> +++ b/include/hw/acpi/acpi-defs.h
> @@ -295,6 +295,58 @@ typedef struct AcpiMultipleApicTable AcpiMultipleApicTable;
>  #define ACPI_APIC_GENERIC_TRANSLATOR    15
>  #define ACPI_APIC_RESERVED              16   /* 16 and greater are reserved */
>

(2) Please add a comment above the following macros: they come from the
UEFI Spec 2.6, "N.2.5 Memory Error Section".

> +#define CPER_MEM_VALID_ERROR_STATUS     0x0001
> +#define CPER_MEM_VALID_PA               0x0002
> +#define CPER_MEM_VALID_PA_MASK          0x0004
> +#define CPER_MEM_VALID_NODE             0x0008
> +#define CPER_MEM_VALID_CARD             0x0010
> +#define CPER_MEM_VALID_MODULE           0x0020
> +#define CPER_MEM_VALID_BANK             0x0040
> +#define CPER_MEM_VALID_DEVICE           0x0080
> +#define CPER_MEM_VALID_ROW              0x0100
> +#define CPER_MEM_VALID_COLUMN           0x0200
> +#define CPER_MEM_VALID_BIT_POSITION     0x0400
> +#define CPER_MEM_VALID_REQUESTOR_ID     0x0800
> +#define CPER_MEM_VALID_RESPONDER_ID     0x1000
> +#define CPER_MEM_VALID_TARGET_ID        0x2000

(3) _ID should be dropped.

> +#define CPER_MEM_VALID_ERROR_TYPE       0x4000
> +#define CPER_MEM_VALID_RANK_NUMBER      0x8000
> +#define CPER_MEM_VALID_CARD_HANDLE      0x10000
> +#define CPER_MEM_VALID_MODULE_HANDLE    0x20000

(4) I think if you are padding the first 16 macros with zeroes on the
left, then they should be padded to five nibbles, given that you have 18
macros.

(5) Please prefix all of the macro names with "UEFI_".

> +
> +typedef struct {
> +    uint8_t b[16];
> +} uuid_le;
> +
> +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)        \
> +((uuid_le)                              \
> +{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
> +    (b) & 0xff, ((b) >> 8) & 0xff,                   \
> +    (c) & 0xff, ((c) >> 8) & 0xff,                   \
> +    (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) } })

(6) This shouldn't be necessary -- or at least not here. We already have
"include/qemu/uuid.h".

If you need this macro, then in my opinion it should be moved to
"include/qemu/uuid.h" (in a separate patch), and the macro should
produce a compound literal of the QemuUUID structure type.

And, as documented for QemuUUID, it should be in big endian byte order.
For little-endian use, it should be byte-swapped with qemu_uuid_bswap().

> +
> +/* Platform Memory */
> +#define CPER_SEC_PLATFORM_MEM                   \
> +    UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
> +        0xED, 0x7C, 0x83, 0xB1)

(7) Please add a comment this is from UEFI 2.6 "N.2.2 Section
Descriptor".

(8) Please prefix the macro with UEFI_.

> +
> +/* Values for Notify Type field above */
> +
> +enum acpi_hest_notify_types {
> +    ACPI_HEST_NOTIFY_POLLED = 0,
> +    ACPI_HEST_NOTIFY_EXTERNAL = 1,
> +    ACPI_HEST_NOTIFY_LOCAL = 2,
> +    ACPI_HEST_NOTIFY_SCI = 3,
> +    ACPI_HEST_NOTIFY_NMI = 4,
> +    ACPI_HEST_NOTIFY_CMCI = 5,  /* ACPI 5.0 */
> +    ACPI_HEST_NOTIFY_MCE = 6,   /* ACPI 5.0 */
> +    ACPI_HEST_NOTIFY_GPIO = 7,  /* ACPI 6.0 */
> +    ACPI_HEST_NOTIFY_SEA = 8,   /* ACPI 6.1 */
> +    ACPI_HEST_NOTIFY_SEI = 9,   /* ACPI 6.1 */
> +    ACPI_HEST_NOTIFY_GSIV = 10, /* ACPI 6.1 */
> +    ACPI_HEST_NOTIFY_RESERVED = 11  /* 11 and greater are reserved */
> +};
> +

(9) Please add a comment that this is from the ACPI 6.1 spec, "18.3.2.9
Hardware Error Notification".

(10) For better or worse, type names and struct tags in this header file
use CamelCase, and generally start with the prefix Acpi. So I think the
above should be called "AcpiHestNotifyType" (singular).

The enum constants look good.

>  /*
>   * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
>   */
> @@ -475,6 +527,181 @@ struct AcpiSystemResourceAffinityTable
>  } QEMU_PACKED;
>  typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
>
> +#define ACPI_ADR_SPACE_SYSTEM_MEMORY    (uint8_t) 0
> +#define ACPI_ADR_SPACE_SYSTEM_IO        (uint8_t) 1
> +#define ACPI_ADR_SPACE_PCI_CONFIG       (uint8_t) 2
> +#define ACPI_ADR_SPACE_EC               (uint8_t) 3
> +#define ACPI_ADR_SPACE_SMBUS            (uint8_t) 4
> +#define ACPI_ADR_SPACE_CMOS             (uint8_t) 5
> +#define ACPI_ADR_SPACE_PCI_BAR_TARGET   (uint8_t) 6
> +#define ACPI_ADR_SPACE_IPMI             (uint8_t) 7
> +#define ACPI_ADR_SPACE_GPIO             (uint8_t) 8
> +#define ACPI_ADR_SPACE_GSBUS            (uint8_t) 9
> +#define ACPI_ADR_SPACE_PLATFORM_COMM    (uint8_t) 10

(11) These macros are not necessary. Instead, please extend the
AmlRegionSpace enum type in "include/hw/acpi/aml-build.h".

(12) Additionally, where do the values 5 through 9 come from? ACPI 6.1
"5.2.3.2 Generic Address Structure" leaves them reserved.

> +
> +/* GAS - Generic Address Structure */
> +struct acpi_generic_address {
> +    uint8_t space_id;       /* Address space where
> +                             *struct or register exists
> +                             */
> +    uint8_t bit_width;      /* Size in bits of given register */
> +    uint8_t bit_offset;     /* Bit offset within the register */
> +    uint8_t access_width;   /* Minimum Access size (ACPI 3.0) */
> +    uint64_t address;       /* 64-bit address of struct or register */
> +} __attribute__ ((packed));
> +

(13) This structure is already defined, see AcpiGenericAddress.

> +/* Hardware Error Notification */
> +struct acpi_hest_notify {
> +    uint8_t type;
> +    uint8_t length;
> +    uint16_t config_write_enable;
> +    uint32_t poll_interval;
> +    uint32_t vector;
> +    uint32_t polling_threshold_value;
> +    uint32_t polling_threshold_window;
> +    uint32_t error_threshold_value;
> +    uint32_t error_threshold_window;
> +};

(14) Please add a comment that this is from the ACPI 6.1 spec, "18.3.2.9
Hardware Error Notification".

(15) The structure should be called AcpiHestNotify. Please also add a
direct typedef for it, similarly to the other struct AcpiXxxx types seen
in this header.

(16) To the "type" field, please append a comment that the values come
from AcpiHestNotifyType.

(17) This structure should be packed. Please add QEMU_PACKED between the
closing brace and the semicolon.

> +
> +enum acpi_hest_types {
> +    ACPI_HEST_TYPE_IA32_CHECK = 0,
> +    ACPI_HEST_TYPE_IA32_CORRECTED_CHECK = 1,
> +    ACPI_HEST_TYPE_IA32_NMI = 2,
> +    ACPI_HEST_TYPE_NOT_USED3 = 3,
> +    ACPI_HEST_TYPE_NOT_USED4 = 4,
> +    ACPI_HEST_TYPE_NOT_USED5 = 5,
> +    ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
> +    ACPI_HEST_TYPE_AER_ENDPOINT = 7,
> +    ACPI_HEST_TYPE_AER_BRIDGE = 8,
> +    ACPI_HEST_TYPE_GENERIC_ERROR = 9,
> +    ACPI_HEST_TYPE_GENERIC_ERROR_V2 = 10,
> +    ACPI_HEST_TYPE_RESERVED = 11    /* 11 and greater are reserved */
> +};

(18) Please add a comment that these are from ACPI 6.1, sections
"18.3.2.1 IA-32 Architecture Machine Check Exception" through "18.3.2.8
Generic Hardware Error Source version 2".

(19) The type name should be "AcpiHestSourceType" (singular).

(20) I think the enum constants should be renamed to
ACPI_HEST_SOURCE_xxx, from ACPI_HEST_TYPE_xxx.

(21) I think the NOT_USED{3,4,5} enum constants should be removed.

> +
> +/* Values for block_status flags above */

(22) Here I think we should only say, 'Block Status bitmasks from ACPI
6.1, "18.3.2.7.1 Generic Error Data"'. The block_status field that you
refer to is not above, it comes later.

> +#define ACPI_BERT_UNCORRECTABLE             (1)
> +#define ACPI_BERT_CORRECTABLE               (1 << 1)
> +#define ACPI_BERT_MULTIPLE_UNCORRECTABLE    (1 << 2)
> +#define ACPI_BERT_MULTIPLE_CORRECTABLE      (1 << 3)
> +/* 8 bits, error count */
> +#define ACPI_BERT_ERROR_ENTRY_COUNT         (0xFF << 4)
>

(23) Any particular reason to call these BERT? The "Boot Error Record
Table" is specified in "18.3.1 Boot Error Source", but the block status
bitmasks don't look related.

To me ACPI_GEBS_xxx ("generic error block status") seems like a more
fitting prefix.

+
> +/* Generic Hardware Error Source Structure */
> +struct AcpiGenericHardwareErrorSource {
> +    uint16_t type;
> +    uint16_t source_id;
> +    uint16_t related_source_id;
> +    uint8_t flags;
> +    uint8_t enabled;
> +    uint32_t number_of_records;
> +    uint32_t max_sections_per_record;
> +    uint32_t max_raw_data_length;
> +    struct acpi_generic_address error_status_address;
> +    struct acpi_hest_notify notify;
> +    uint32_t error_status_block_length;
> +} QEMU_PACKED;
> +typedef struct AcpiGenericHardwareErrorSource AcpiGenericHardwareErrorSource;

(24) This looks good to me in general.

I suggest adding a reference to ACPI 6.1 "18.3.2.7 Generic Hardware
Error Source". Also, I think we should mention that "type" has to be
ACPI_HEST_SOURCE_GENERIC_ERROR.

> +
> +/* Generic Hardware Error Source , version 2 */
> +struct AcpiGenericHardwareErrorSourceV2 {
> +    uint16_t type;
> +    uint16_t source_id;
> +    uint16_t related_source_id;
> +    uint8_t flags;
> +    uint8_t enabled;
> +    uint32_t number_of_records;
> +    uint32_t max_sections_per_record;
> +    uint32_t max_raw_data_length;
> +    struct acpi_generic_address error_status_address;
> +    struct acpi_hest_notify notify;
> +    uint32_t error_status_block_length;
> +    struct acpi_generic_address read_ack_register;
> +    uint64_t read_ack_preserve;
> +    uint64_t read_ack_write;
> +} QEMU_PACKED;
> +typedef struct AcpiGenericHardwareErrorSourceV2
> +            AcpiGenericHardwareErrorSourceV2;

(25) Same comments; I suggest adding a reference to "18.3.2.8 Generic
Hardware Error Source version 2", and mentioning
ACPI_HEST_SOURCE_GENERIC_ERROR_V2 for the "type" field.

> +
> +/* Generic Error Status block */
> +
> +struct AcpiGenericErrorStatus {
> +    uint32_t block_status;
> +    uint32_t raw_data_offset;
> +    uint32_t raw_data_length;
> +    uint32_t data_length;
> +    uint32_t error_severity;
> +};
> +typedef struct AcpiGenericErrorStatus AcpiGenericErrorStatus;
> +

(26) Please mention that this is from ACPI 6.1, "18.3.2.7.1 Generic
Error Data".

(27) Near the block_status field, we should point out that it is a
bitmask composed of ACPI_GEBS_xxx macros.

(28) QEMU_PACKED is missing. (It will make no difference in practice,
but I recommend it for consistency and documentation purposes.)

> +/* Generic Error Data entry */
> +
> +struct AcpiGenericErrorData {
> +    uint8_t section_type[16];
> +    uint32_t error_severity;
> +    uint16_t revision;
> +    uint8_t validation_bits;
> +    uint8_t flags;
> +    uint32_t error_data_length;
> +    uint8_t fru_id[16];
> +    uint8_t fru_text[20];
> +};
> +typedef struct AcpiGenericErrorData AcpiGenericErrorData;

(29) Please point to ACPI 6.1, "18.3.2.7.1 Generic Error Data" again, in
the leading comment.

(30) QEMU_PACKED is missing.

(31) I think we should use the QemuUUID type for the "section_type"
field. And, in order to make it clear that it has little endian
encoding, let's call it "section_type_le".

An added benefit is that in the code, the field can be set with a simple
structure assignment from UEFI_CPER_SEC_PLATFORM_MEM (and then can be
byte-swapped in place, for little endiannes, with qemu_uuid_bswap()).

> +
> +/* Extension for revision 0x0300  */
> +struct AcpiGenericErrorDataV300 {
> +    uint8_t section_type[16];
> +    uint32_t error_severity;
> +    uint16_t revision;
> +    uint8_t validation_bits;
> +    uint8_t flags;
> +    uint32_t error_data_length;
> +    uint8_t fru_id[16];
> +    uint8_t fru_text[20];
> +    uint64_t time_stamp;
> +};
> +typedef struct AcpiGenericErrorDataV300 AcpiGenericErrorDataV300;
> +

(32) Same comments as (29), (30), (31) above.

(33) Actually, do we need both AcpiGenericErrorData and
AcpiGenericErrorDataV300? In the code we seem to be using only the
former. On the other hand, in the spec I can see only the latter. Where
does AcpiGenericErrorData come from?

> +enum {
> +    CPER_SEV_RECOVERABLE,
> +    CPER_SEV_FATAL,
> +    CPER_SEV_CORRECTED,
> +    CPER_SEV_INFORMATIONAL,
> +};

(34) I suggest giving a name to this type, for example
AcpiGenericErrorSeverity.

(35) The enumeration constants should start with ACPI_.

(36) I suggest moving this type above AcpiGenericErrorData and
AcpiGenericErrorDataV300, and remarking on the "error_severity" fields
that they take their values from AcpiGenericErrorSeverity.

(37) Where does "INFORMATIONAL" come from? In ACPI 6.1, "18.3.2.7.1
Generic Error Data", I see "None" for value 3.

> +
> +/* Memory Error Section */
> +struct cper_sec_mem_err {
> +    uint64_t    validation_bits;
> +    uint64_t    error_status;
> +    uint64_t    physical_addr;
> +    uint64_t    physical_addr_mask;
> +    uint16_t    node;
> +    uint16_t    card;
> +    uint16_t    module;
> +    uint16_t    bank;
> +    uint16_t    device;
> +    uint16_t    row;
> +    uint16_t    column;
> +    uint16_t    bit_pos;
> +    uint64_t    requestor_id;
> +    uint64_t    responder_id;
> +    uint64_t    target_id;
> +    uint8_t     error_type;
> +    uint8_t     reserved;
> +    uint16_t    rank;
> +    uint16_t    mem_array_handle;   /* card handle in UEFI 2.4 */
> +    uint16_t    mem_dev_handle;     /* module handle in UEFI 2.4 */
> +};
> + typedef struct cper_sec_mem_err cper_sec_mem_err;

(38) Please add a comment that is is from UEFI 2.6, "N.2.5 Memory Error
Section".

(39) The structure and the typedef should be called "UefiCperSecMemErr".

(40) I suggest adding a comment to "validation_bits" that it is a
bitmask composed of CPER_MEM_VALID_xxx macros.

(41) QEMU_PACKED is missing.

> +
> +/*
> + * HEST Description Table
> + */
> +struct AcpiHardwareErrorSourceTable {
> +    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
> +    uint32_t           error_source_count;
> +} QEMU_PACKED;
> +typedef struct AcpiHardwareErrorSourceTable AcpiHardwareErrorSourceTable;
> +
>  #define ACPI_SRAT_PROCESSOR_APIC     0
>  #define ACPI_SRAT_MEMORY             1
>  #define ACPI_SRAT_PROCESSOR_x2APIC   2

Next file:

> diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h
> new file mode 100644
> index 0000000..0cadc2b
> --- /dev/null
> +++ b/include/hw/acpi/hest_ghes.h
> @@ -0,0 +1,43 @@
> +#ifndef ACPI_GHES_H
> +#define ACPI_GHES_H
> +
> +#include "hw/acpi/bios-linker-loader.h"
> +
> +#define GHES_ERRORS_FW_CFG_FILE      "etc/hardware_errors"
> +#define GHES_DATA_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
> +
> +#define GAS_ADDRESS_OFFSET              4
> +#define ERROR_STATUS_ADDRESS_OFFSET     20
> +#define NOTIFICATION_STRUCTURE          32
> +
> +#define BFAPEI_OK   0
> +#define BFAPEI_FAIL 1
> +
> +/* The max number of error source, the error sources
> + * are classified by notification type, below is the definition
> + * 0 - Polled
> + * 1 - External Interrupt
> + * 2 - Local Interrupt
> + * 3 - SCI
> + * 4 - NMI
> + * 5 - CMCI
> + * 6 - MCE
> + * 7 - GPIO-Signal
> + * 8 - ARMv8 SEA
> + * 9 - ARMv8 SEI
> + * 10 - External Interrupt - GSIV
> + */
> +#define MAX_ERROR_SOURCE_COUNT_V6           11

I'll have to review this header file more thoroughly, once I see the
code that references these macros. For now, I have one comment:

(42) I think the notification type list should be removed from this
location. Also, the open-coded value 11 should be replaced with
the ACPI_HEST_NOTIFY_RESERVED enumeration constant.

I will try to continue reviewing this patch sometime next week (second
half of the week at the earliest, I think).

Please feel free to disagree with my comments; I prefer to write down
everything that crosses my mind. It's encouraged to raise
counter-arguments.

Thanks
Laszlo

> +/* The max size in Bytes for one error block */
> +#define MAX_RAW_DATA_LENGTH                 0x1000
> +
> +typedef struct GhesErrorState {
> +    uint64_t physical_addr;
> +    uint64_t ghes_addr_le[8];
> +} GhesErrorState;
> +
> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
> +                            BIOSLinker *linker);
> +void ghes_add_fw_cfg(FWCfgState *s, GArray *guid);
> +void ghes_update_guest(uint32_t notify, uint64_t physical_address);
> +#endif
>

> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 0835e59..e7ab5dc 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -45,6 +45,8 @@
>  #include "hw/arm/virt.h"
>  #include "sysemu/numa.h"
>  #include "kvm_arm.h"
> +#include "hw/acpi/vmgenid.h"
> +#include "hw/acpi/hest_ghes.h"
>
>  #define ARM_SPI_BASE 32
>  #define ACPI_POWER_BUTTON_DEVICE "PWRB"
> @@ -778,6 +780,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>      acpi_add_table(table_offsets, tables_blob);
>      build_spcr(tables_blob, tables->linker, vms);
>
> +    acpi_add_table(table_offsets, tables_blob);
> +    ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker);
> +
>      if (nb_numa_nodes > 0) {
>          acpi_add_table(table_offsets, tables_blob);
>          build_srat(tables_blob, tables->linker, vms);
> @@ -892,6 +897,7 @@ void virt_acpi_setup(VirtMachineState *vms)
>
>      build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
>                                                ACPI_BUILD_RSDP_FILE, 0);
> +    ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
>
>      qemu_register_reset(virt_acpi_build_reset, build_state);
>      virt_acpi_build_reset(build_state);

> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 1e3bd2b..d5f1552 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -121,3 +121,4 @@ CONFIG_ACPI=y
>  CONFIG_SMBIOS=y
>  CONFIG_ASPEED_SOC=y
>  CONFIG_GPIO_KEY=y
> +CONFIG_ACPI_APEI_GENERATION=y

> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index 11c35bc..776b46e 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
>  common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
>  common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>  common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
> +common-obj-$(CONFIG_ACPI_APEI_GENERATION) += hest_ghes.o
>  common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>
>  common-obj-y += acpi_interface.o

> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
> index c6f2032..802b98d 100644
> --- a/hw/acpi/aml-build.c
> +++ b/hw/acpi/aml-build.c
> @@ -1560,6 +1560,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
>      tables->table_data = g_array_new(false, true /* clear */, 1);
>      tables->tcpalog = g_array_new(false, true /* clear */, 1);
>      tables->vmgenid = g_array_new(false, true /* clear */, 1);
> +    tables->hardware_errors = g_array_new(false, true /* clear */, 1);
>      tables->linker = bios_linker_loader_init();
>  }
>
> @@ -1570,6 +1571,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
>      g_array_free(tables->table_data, true);
>      g_array_free(tables->tcpalog, mfre);
>      g_array_free(tables->vmgenid, mfre);
> +    g_array_free(tables->hardware_errors, mfre);
>  }
>
>  /* Build rsdt table */

> diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c
> new file mode 100644
> index 0000000..91d382e
> --- /dev/null
> +++ b/hw/acpi/hest_ghes.c
> @@ -0,0 +1,203 @@
> +/*
> + *  APEI GHES table Generation
> + *
> + *  Copyright (C) 2017 huawei.
> + *
> + *  Author: Dongjiu Geng <[e-mail]>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qmp-commands.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/aml-build.h"
> +#include "hw/acpi/hest_ghes.h"
> +#include "hw/nvram/fw_cfg.h"
> +#include "sysemu/sysemu.h"
> +
> +static int ghes_generate_cper_record(uint64_t block_error_address,
> +                                    uint64_t error_physical_addr)
> +{
> +    AcpiGenericErrorStatus block;
> +    AcpiGenericErrorData *gdata;
> +    struct cper_sec_mem_err *mem_err;
> +    uint64_t block_data_length;
> +    unsigned char *buffer;
> +
> +    cpu_physical_memory_read(block_error_address, &block,
> +                                sizeof(AcpiGenericErrorStatus));
> +
> +    block_data_length = sizeof(AcpiGenericErrorStatus) + block.data_length;
> +
> +    /* If the Generic Error Status Block is NULL, update
> +     * the block header
> +     */
> +    if (!block.block_status) {
> +        block.block_status = ACPI_BERT_UNCORRECTABLE;
> +        block.error_severity = CPER_SEV_FATAL;
> +    }
> +
> +    block.data_length += sizeof(AcpiGenericErrorData);
> +    block.data_length += sizeof(struct cper_sec_mem_err);
> +
> +    /* Write back the Generic Error Status Block to guest memory */
> +    cpu_physical_memory_write(block_error_address, &block,
> +                        sizeof(AcpiGenericErrorStatus));
> +
> +    /* Fill in Generic Error Data Entry */
> +    buffer = g_malloc(sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
> +    memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
> +    gdata = (AcpiGenericErrorData *)buffer;
> +
> +    memcpy(gdata->section_type, (void *) &CPER_SEC_PLATFORM_MEM,
> +                sizeof(uuid_le));
> +    gdata->error_data_length = sizeof(struct cper_sec_mem_err);
> +
> +    mem_err = (struct cper_sec_mem_err *) (gdata + 1);
> +
> +    /* In order to simplify simulation, hardcode the CPER section to memory
> +     * section.
> +     */
> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_TYPE;
> +    mem_err->error_type = 3;
> +
> +    mem_err->validation_bits |= CPER_MEM_VALID_PA;
> +    mem_err->physical_addr = error_physical_addr;
> +
> +    mem_err->validation_bits |= CPER_MEM_VALID_CARD | CPER_MEM_VALID_MODULE |
> +            CPER_MEM_VALID_BANK | CPER_MEM_VALID_ROW |
> +            CPER_MEM_VALID_COLUMN | CPER_MEM_VALID_BIT_POSITION;
> +    mem_err->card = 1;
> +    mem_err->module = 2;
> +    mem_err->bank = 3;
> +    mem_err->row = 1;
> +    mem_err->column = 2;
> +    mem_err->bit_pos = 5;
> +
> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_STATUS;
> +    mem_err->error_status = 4 << 8;
> +
> +    /* Write back the Generic Error Data Entry to guest memory */
> +    cpu_physical_memory_write(block_error_address + block_data_length, buffer,
> +                    sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
> +
> +    g_free(buffer);
> +    return BFAPEI_OK;
> +}
> +
> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
> +                                            BIOSLinker *linker)
> +{
> +    Aml *hest;
> +    uint32_t address_registers_offset;
> +    AcpiTableHeader *header;
> +    AcpiGenericHardwareErrorSource *error_source;
> +    int i;
> +
> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
> +
> +    /* New address register and Error status block table size*/
> +    g_array_set_size(hardware_error, MAX_ERROR_SOURCE_COUNT_V6
> +                                        * block_reqr_size);
> +
> +    /* Put this in a HEST table */
> +    hest = init_aml_allocator();
> +    address_registers_offset = table_data->len
> +                                + sizeof(AcpiHardwareErrorSourceTable)
> +                                + ERROR_STATUS_ADDRESS_OFFSET
> +                                + GAS_ADDRESS_OFFSET;
> +    /* Reserve space for HEST table size*/
> +    acpi_data_push(hest->buf, sizeof(AcpiHardwareErrorSourceTable)
> +                                + MAX_ERROR_SOURCE_COUNT_V6
> +                                * sizeof(AcpiGenericHardwareErrorSource));
> +
> +    g_array_append_vals(table_data, hest->buf->data, hest->buf->len);
> +    /* Allocate guest memory for the Data fw_cfg blob */
> +    bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE,
> +                            hardware_error, 4096,
> +                            false /* page boundary, high memory */);
> +    header = (AcpiTableHeader *)(table_data->data
> +                        + table_data->len - hest->buf->len);
> +    *(uint32_t *)(header + 1) = MAX_ERROR_SOURCE_COUNT_V6;
> +    error_source = (AcpiGenericHardwareErrorSource *)((char *)header
> +                                    + sizeof(AcpiHardwareErrorSourceTable));
> +
> +    for (i = 0; i < MAX_ERROR_SOURCE_COUNT_V6; i++) {
> +        error_source->type = ACPI_HEST_TYPE_GENERIC_ERROR;
> +        error_source->source_id = 0;
> +        error_source->related_source_id = 0xffff;
> +        error_source->flags = 0;
> +        error_source->enabled = 1;
> +        error_source->number_of_records = 1;
> +        error_source->max_sections_per_record = 1;
> +        error_source->max_raw_data_length = MAX_RAW_DATA_LENGTH;
> +        error_source->error_status_address.space_id =
> +                                    ACPI_ADR_SPACE_SYSTEM_MEMORY;
> +        error_source->error_status_address.bit_width = 64;
> +        error_source->error_status_address.bit_offset = 0;
> +        error_source->error_status_address.access_width = 4;
> +        error_source->notify.type = i;
> +        error_source->notify.length = sizeof(AcpiGenericHardwareErrorSource);
> +
> +        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
> +                                sizeof(uint64_t) * i, sizeof(uint64_t),
> +                                GHES_ERRORS_FW_CFG_FILE,
> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
> +                                i * MAX_RAW_DATA_LENGTH);
> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
> +                    address_registers_offset
> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
> +                    i * sizeof(uint64_t));
> +
> +        bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
> +                                i * sizeof(uint64_t), sizeof(uint64_t),
> +                                GHES_ERRORS_FW_CFG_FILE,
> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
> +                                i * MAX_RAW_DATA_LENGTH);
> +         error_source++;
> +    }
> +
> +     build_header(linker, table_data,
> +        (void *)header, "HEST", hest->buf->len, 1, NULL, "GHES");
> +
> +    free_aml_allocator();
> +}
> +
> +static GhesErrorState ges;
> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
> +{
> +
> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
> +    int size = MAX_ERROR_SOURCE_COUNT_V6 * block_reqr_size;
> +
> +    /* Create a read-only fw_cfg file for GHES */
> +    fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
> +                    size);
> +    /* Create a read-write fw_cfg file for Address */
> +    fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
> +                            &(ges.ghes_addr_le[0]),
> +                            sizeof(uint64_t) * MAX_ERROR_SOURCE_COUNT_V6,
> +                            false);
> +}
> +
> +void ghes_update_guest(uint32_t notify, uint64_t physical_address)
> +{
> +    uint64_t block_error_addr;
> +
> +    if (physical_address) {
> +        ges.physical_addr = physical_address;
> +        block_error_addr = ges.ghes_addr_le[notify];
> +        block_error_addr = le32_to_cpu(block_error_addr);
> +
> +        /* A zero value in ghes_addr means that BIOS has not yet written
> +         * the address
> +         */
> +        if (block_error_addr) {
> +            ghes_generate_cper_record(block_error_addr, physical_address);
> +        }
> +    }
> +}

> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
> index 00c21f1..c1d15b3 100644
> --- a/include/hw/acpi/aml-build.h
> +++ b/include/hw/acpi/aml-build.h
> @@ -211,6 +211,7 @@ struct AcpiBuildTables {
>      GArray *rsdp;
>      GArray *tcpalog;
>      GArray *vmgenid;
> +    GArray *hardware_errors;
>      BIOSLinker *linker;
>  } AcpiBuildTables;
>

Michael S. Tsirkin May 12, 2017, 11:59 p.m. UTC | #2

On Sun, Apr 30, 2017 at 01:35:03PM +0800, Dongjiu Geng wrote:
> This implements APEI GHES Table by passing the error cper info
> to the guest via a fw_cfg_blob. After a CPER info is added, an
> SEA/SEI exception will be injected into the guest OS.
> 
> Below is the table layout, the max number of error soure is 11,
> which is classified by notification type.
> 
> etc/acpi/tables                 etc/hardware_errors
> ================     ==========================================
>                      +-----------+
> +--------------+     | address   |         +-> +--------------+
> |    HEST      +     | registers |         |   | Error Status |
> + +------------+     | +---------+         |   | Data Block 1 |
> | | GHES1      | --> | |address1 | --------+   | +------------+
> | | GHES2      | --> | |address2 | ------+     | |  CPER      |
> | | GHES3      | --> | |address3 | ----+ |     | |  CPER      |
> | |  ....      | --> | | ....... |     | |     | |  CPER      |
> | | GHES10     | --> | |address10| -+  | |     | |  CPER      |
> +-+------------+     +-+---------+  |  | |     +-+------------+
>                                     |  | |
>                                     |  | +---> +--------------+
>                                     |  |       | Error Status |
>                                     |  |       | Data Block 2 |
>                                     |  |       | +------------+
>                                     |  |       | |  CPER      |
>                                     |  |       | |  CPER      |
>                                     |  |       +-+------------+
>                                     |  |
>                                     |  +-----> +--------------+
>                                     |          | Error Status |
>                                     |          | Data Block 3 |
>                                     |          | +------------+
>                                     |          | |  CPER      |
>                                     |          +-+------------+
>                                     |            ...........
>                                     +--------> +--------------+
>                                                | Error Status |
>                                                | Data Block 10|
>                                                | +------------+
>                                                | |  CPER      |
>                                                | |  CPER      |
>                                                | |  CPER      |
>                                                +-+------------+
> 
> Signed-off-by: Dongjiu Geng <[e-mail]>
> ---
>  default-configs/arm-softmmu.mak |   1 +
>  hw/acpi/Makefile.objs           |   1 +
>  hw/acpi/aml-build.c             |   2 +
>  hw/acpi/hest_ghes.c             | 203 +++++++++++++++++++++++++++++++++++
>  hw/arm/virt-acpi-build.c        |   6 ++
>  include/hw/acpi/acpi-defs.h     | 227 ++++++++++++++++++++++++++++++++++++++++
>  include/hw/acpi/aml-build.h     |   1 +
>  include/hw/acpi/hest_ghes.h     |  43 ++++++++
>  8 files changed, 484 insertions(+)
>  create mode 100644 hw/acpi/hest_ghes.c
>  create mode 100644 include/hw/acpi/hest_ghes.h
> 
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 1e3bd2b..d5f1552 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -121,3 +121,4 @@ CONFIG_ACPI=y
>  CONFIG_SMBIOS=y
>  CONFIG_ASPEED_SOC=y
>  CONFIG_GPIO_KEY=y
> +CONFIG_ACPI_APEI_GENERATION=y
> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> index 11c35bc..776b46e 100644
> --- a/hw/acpi/Makefile.objs
> +++ b/hw/acpi/Makefile.objs
> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
>  common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
>  common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>  common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
> +common-obj-$(CONFIG_ACPI_APEI_GENERATION) += hest_ghes.o
>  common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>  
>  common-obj-y += acpi_interface.o
> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
> index c6f2032..802b98d 100644
> --- a/hw/acpi/aml-build.c
> +++ b/hw/acpi/aml-build.c
> @@ -1560,6 +1560,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
>      tables->table_data = g_array_new(false, true /* clear */, 1);
>      tables->tcpalog = g_array_new(false, true /* clear */, 1);
>      tables->vmgenid = g_array_new(false, true /* clear */, 1);
> +    tables->hardware_errors = g_array_new(false, true /* clear */, 1);
>      tables->linker = bios_linker_loader_init();
>  }
>  
> @@ -1570,6 +1571,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
>      g_array_free(tables->table_data, true);
>      g_array_free(tables->tcpalog, mfre);
>      g_array_free(tables->vmgenid, mfre);
> +    g_array_free(tables->hardware_errors, mfre);
>  }
>  
>  /* Build rsdt table */
> diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c
> new file mode 100644
> index 0000000..91d382e
> --- /dev/null
> +++ b/hw/acpi/hest_ghes.c
> @@ -0,0 +1,203 @@
> +/*
> + *  APEI GHES table Generation
> + *
> + *  Copyright (C) 2017 huawei.
> + *
> + *  Author: Dongjiu Geng <[e-mail]>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qmp-commands.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/aml-build.h"
> +#include "hw/acpi/hest_ghes.h"
> +#include "hw/nvram/fw_cfg.h"
> +#include "sysemu/sysemu.h"
> +
> +static int ghes_generate_cper_record(uint64_t block_error_address,
> +                                    uint64_t error_physical_addr)
> +{
> +    AcpiGenericErrorStatus block;
> +    AcpiGenericErrorData *gdata;
> +    struct cper_sec_mem_err *mem_err;
> +    uint64_t block_data_length;
> +    unsigned char *buffer;
> +
> +    cpu_physical_memory_read(block_error_address, &block,
> +                                sizeof(AcpiGenericErrorStatus));
> +
> +    block_data_length = sizeof(AcpiGenericErrorStatus) + block.data_length;
> +
> +    /* If the Generic Error Status Block is NULL, update
> +     * the block header
> +     */
> +    if (!block.block_status) {
> +        block.block_status = ACPI_BERT_UNCORRECTABLE;
> +        block.error_severity = CPER_SEV_FATAL;
> +    }
> +
> +    block.data_length += sizeof(AcpiGenericErrorData);
> +    block.data_length += sizeof(struct cper_sec_mem_err);
> +
> +    /* Write back the Generic Error Status Block to guest memory */
> +    cpu_physical_memory_write(block_error_address, &block,
> +                        sizeof(AcpiGenericErrorStatus));
> +
> +    /* Fill in Generic Error Data Entry */
> +    buffer = g_malloc(sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
> +    memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
> +    gdata = (AcpiGenericErrorData *)buffer;
> +
> +    memcpy(gdata->section_type, (void *) &CPER_SEC_PLATFORM_MEM,
> +                sizeof(uuid_le));
> +    gdata->error_data_length = sizeof(struct cper_sec_mem_err);
> +
> +    mem_err = (struct cper_sec_mem_err *) (gdata + 1);
> +
> +    /* In order to simplify simulation, hardcode the CPER section to memory
> +     * section.
> +     */
> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_TYPE;
> +    mem_err->error_type = 3;
> +
> +    mem_err->validation_bits |= CPER_MEM_VALID_PA;
> +    mem_err->physical_addr = error_physical_addr;
> +
> +    mem_err->validation_bits |= CPER_MEM_VALID_CARD | CPER_MEM_VALID_MODULE |
> +            CPER_MEM_VALID_BANK | CPER_MEM_VALID_ROW |
> +            CPER_MEM_VALID_COLUMN | CPER_MEM_VALID_BIT_POSITION;
> +    mem_err->card = 1;
> +    mem_err->module = 2;
> +    mem_err->bank = 3;
> +    mem_err->row = 1;
> +    mem_err->column = 2;
> +    mem_err->bit_pos = 5;
> +
> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_STATUS;
> +    mem_err->error_status = 4 << 8;
> +
> +    /* Write back the Generic Error Data Entry to guest memory */
> +    cpu_physical_memory_write(block_error_address + block_data_length, buffer,
> +                    sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
> +
> +    g_free(buffer);
> +    return BFAPEI_OK;
> +}
> +
> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
> +                                            BIOSLinker *linker)
> +{
> +    Aml *hest;
> +    uint32_t address_registers_offset;
> +    AcpiTableHeader *header;
> +    AcpiGenericHardwareErrorSource *error_source;
> +    int i;
> +
> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
> +
> +    /* New address register and Error status block table size*/
> +    g_array_set_size(hardware_error, MAX_ERROR_SOURCE_COUNT_V6
> +                                        * block_reqr_size);
> +
> +    /* Put this in a HEST table */
> +    hest = init_aml_allocator();
> +    address_registers_offset = table_data->len
> +                                + sizeof(AcpiHardwareErrorSourceTable)
> +                                + ERROR_STATUS_ADDRESS_OFFSET
> +                                + GAS_ADDRESS_OFFSET;
> +    /* Reserve space for HEST table size*/
> +    acpi_data_push(hest->buf, sizeof(AcpiHardwareErrorSourceTable)
> +                                + MAX_ERROR_SOURCE_COUNT_V6
> +                                * sizeof(AcpiGenericHardwareErrorSource));
> +
> +    g_array_append_vals(table_data, hest->buf->data, hest->buf->len);
> +    /* Allocate guest memory for the Data fw_cfg blob */
> +    bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE,
> +                            hardware_error, 4096,
> +                            false /* page boundary, high memory */);
> +    header = (AcpiTableHeader *)(table_data->data
> +                        + table_data->len - hest->buf->len);
> +    *(uint32_t *)(header + 1) = MAX_ERROR_SOURCE_COUNT_V6;
> +    error_source = (AcpiGenericHardwareErrorSource *)((char *)header
> +                                    + sizeof(AcpiHardwareErrorSourceTable));
> +
> +    for (i = 0; i < MAX_ERROR_SOURCE_COUNT_V6; i++) {
> +        error_source->type = ACPI_HEST_TYPE_GENERIC_ERROR;
> +        error_source->source_id = 0;
> +        error_source->related_source_id = 0xffff;
> +        error_source->flags = 0;
> +        error_source->enabled = 1;
> +        error_source->number_of_records = 1;
> +        error_source->max_sections_per_record = 1;
> +        error_source->max_raw_data_length = MAX_RAW_DATA_LENGTH;
> +        error_source->error_status_address.space_id =
> +                                    ACPI_ADR_SPACE_SYSTEM_MEMORY;
> +        error_source->error_status_address.bit_width = 64;
> +        error_source->error_status_address.bit_offset = 0;
> +        error_source->error_status_address.access_width = 4;
> +        error_source->notify.type = i;
> +        error_source->notify.length = sizeof(AcpiGenericHardwareErrorSource);
> +
> +        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
> +                                sizeof(uint64_t) * i, sizeof(uint64_t),
> +                                GHES_ERRORS_FW_CFG_FILE,
> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
> +                                i * MAX_RAW_DATA_LENGTH);
> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
> +                    address_registers_offset
> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
> +                    i * sizeof(uint64_t));
> +
> +        bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
> +                                i * sizeof(uint64_t), sizeof(uint64_t),
> +                                GHES_ERRORS_FW_CFG_FILE,
> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
> +                                i * MAX_RAW_DATA_LENGTH);
> +         error_source++;
> +    }
> +
> +     build_header(linker, table_data,
> +        (void *)header, "HEST", hest->buf->len, 1, NULL, "GHES");
> +
> +    free_aml_allocator();
> +}
> +
> +static GhesErrorState ges;
> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
> +{
> +
> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
> +    int size = MAX_ERROR_SOURCE_COUNT_V6 * block_reqr_size;
> +
> +    /* Create a read-only fw_cfg file for GHES */
> +    fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
> +                    size);
> +    /* Create a read-write fw_cfg file for Address */
> +    fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
> +                            &(ges.ghes_addr_le[0]),
> +                            sizeof(uint64_t) * MAX_ERROR_SOURCE_COUNT_V6,
> +                            false);
> +}
> +
> +void ghes_update_guest(uint32_t notify, uint64_t physical_address)
> +{
> +    uint64_t block_error_addr;
> +
> +    if (physical_address) {
> +        ges.physical_addr = physical_address;
> +        block_error_addr = ges.ghes_addr_le[notify];
> +        block_error_addr = le32_to_cpu(block_error_addr);
> +
> +        /* A zero value in ghes_addr means that BIOS has not yet written
> +         * the address
> +         */
> +        if (block_error_addr) {
> +            ghes_generate_cper_record(block_error_addr, physical_address);
> +        }
> +    }
> +}
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 0835e59..e7ab5dc 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -45,6 +45,8 @@
>  #include "hw/arm/virt.h"
>  #include "sysemu/numa.h"
>  #include "kvm_arm.h"
> +#include "hw/acpi/vmgenid.h"
> +#include "hw/acpi/hest_ghes.h"
>  
>  #define ARM_SPI_BASE 32
>  #define ACPI_POWER_BUTTON_DEVICE "PWRB"
> @@ -778,6 +780,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>      acpi_add_table(table_offsets, tables_blob);
>      build_spcr(tables_blob, tables->linker, vms);
>  
> +    acpi_add_table(table_offsets, tables_blob);
> +    ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker);
> +
>      if (nb_numa_nodes > 0) {
>          acpi_add_table(table_offsets, tables_blob);
>          build_srat(tables_blob, tables->linker, vms);
> @@ -892,6 +897,7 @@ void virt_acpi_setup(VirtMachineState *vms)
>  
>      build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
>                                                ACPI_BUILD_RSDP_FILE, 0);
> +    ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
>  
>      qemu_register_reset(virt_acpi_build_reset, build_state);
>      virt_acpi_build_reset(build_state);
> diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
> index 4cc3630..27adede 100644
> --- a/include/hw/acpi/acpi-defs.h
> +++ b/include/hw/acpi/acpi-defs.h
> @@ -295,6 +295,58 @@ typedef struct AcpiMultipleApicTable AcpiMultipleApicTable;
>  #define ACPI_APIC_GENERIC_TRANSLATOR    15
>  #define ACPI_APIC_RESERVED              16   /* 16 and greater are reserved */
>  
> +#define CPER_MEM_VALID_ERROR_STATUS     0x0001
> +#define CPER_MEM_VALID_PA               0x0002
> +#define CPER_MEM_VALID_PA_MASK          0x0004
> +#define CPER_MEM_VALID_NODE             0x0008
> +#define CPER_MEM_VALID_CARD             0x0010
> +#define CPER_MEM_VALID_MODULE           0x0020
> +#define CPER_MEM_VALID_BANK             0x0040
> +#define CPER_MEM_VALID_DEVICE           0x0080
> +#define CPER_MEM_VALID_ROW              0x0100
> +#define CPER_MEM_VALID_COLUMN           0x0200
> +#define CPER_MEM_VALID_BIT_POSITION     0x0400
> +#define CPER_MEM_VALID_REQUESTOR_ID     0x0800
> +#define CPER_MEM_VALID_RESPONDER_ID     0x1000
> +#define CPER_MEM_VALID_TARGET_ID        0x2000
> +#define CPER_MEM_VALID_ERROR_TYPE       0x4000
> +#define CPER_MEM_VALID_RANK_NUMBER      0x8000
> +#define CPER_MEM_VALID_CARD_HANDLE      0x10000
> +#define CPER_MEM_VALID_MODULE_HANDLE    0x20000
> +
> +typedef struct {
> +    uint8_t b[16];
> +} uuid_le;
> +
> +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)        \
> +((uuid_le)                              \
> +{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
> +    (b) & 0xff, ((b) >> 8) & 0xff,                   \
> +    (c) & 0xff, ((c) >> 8) & 0xff,                   \
> +    (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) } })
> +
> +/* Platform Memory */
> +#define CPER_SEC_PLATFORM_MEM                   \
> +    UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
> +        0xED, 0x7C, 0x83, 0xB1)
> +

There's no reason to define these messy one-time use macros.
They just make it hard to look things up in the spec.


You can use build_append_int_noprefix to add data of
any length in LE format.


> +/* Values for Notify Type field above */
> +
> +enum acpi_hest_notify_types {
> +    ACPI_HEST_NOTIFY_POLLED = 0,
> +    ACPI_HEST_NOTIFY_EXTERNAL = 1,
> +    ACPI_HEST_NOTIFY_LOCAL = 2,
> +    ACPI_HEST_NOTIFY_SCI = 3,
> +    ACPI_HEST_NOTIFY_NMI = 4,
> +    ACPI_HEST_NOTIFY_CMCI = 5,  /* ACPI 5.0 */
> +    ACPI_HEST_NOTIFY_MCE = 6,   /* ACPI 5.0 */
> +    ACPI_HEST_NOTIFY_GPIO = 7,  /* ACPI 6.0 */
> +    ACPI_HEST_NOTIFY_SEA = 8,   /* ACPI 6.1 */
> +    ACPI_HEST_NOTIFY_SEI = 9,   /* ACPI 6.1 */
> +    ACPI_HEST_NOTIFY_GSIV = 10, /* ACPI 6.1 */
> +    ACPI_HEST_NOTIFY_RESERVED = 11  /* 11 and greater are reserved */
> +};
> +

these are never reused, it's best

>  /*
>   * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
>   */
> @@ -475,6 +527,181 @@ struct AcpiSystemResourceAffinityTable
>  } QEMU_PACKED;
>  typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
>  
> +#define ACPI_ADR_SPACE_SYSTEM_MEMORY    (uint8_t) 0
> +#define ACPI_ADR_SPACE_SYSTEM_IO        (uint8_t) 1
> +#define ACPI_ADR_SPACE_PCI_CONFIG       (uint8_t) 2
> +#define ACPI_ADR_SPACE_EC               (uint8_t) 3
> +#define ACPI_ADR_SPACE_SMBUS            (uint8_t) 4
> +#define ACPI_ADR_SPACE_CMOS             (uint8_t) 5
> +#define ACPI_ADR_SPACE_PCI_BAR_TARGET   (uint8_t) 6
> +#define ACPI_ADR_SPACE_IPMI             (uint8_t) 7
> +#define ACPI_ADR_SPACE_GPIO             (uint8_t) 8
> +#define ACPI_ADR_SPACE_GSBUS            (uint8_t) 9
> +#define ACPI_ADR_SPACE_PLATFORM_COMM    (uint8_t) 10
> +

We already have macros for some of these and APIs to
format it.

> +/* GAS - Generic Address Structure */
> +struct acpi_generic_address {
> +    uint8_t space_id;       /* Address space where
> +                             *struct or register exists
> +                             */
> +    uint8_t bit_width;      /* Size in bits of given register */
> +    uint8_t bit_offset;     /* Bit offset within the register */
> +    uint8_t access_width;   /* Minimum Access size (ACPI 3.0) */
> +    uint64_t address;       /* 64-bit address of struct or register */
> +} __attribute__ ((packed));
> +
> +/* Hardware Error Notification */
> +struct acpi_hest_notify {
> +    uint8_t type;
> +    uint8_t length;
> +    uint16_t config_write_enable;
> +    uint32_t poll_interval;
> +    uint32_t vector;
> +    uint32_t polling_threshold_value;
> +    uint32_t polling_threshold_window;
> +    uint32_t error_threshold_value;
> +    uint32_t error_threshold_window;
> +};
> +
> +enum acpi_hest_types {
> +    ACPI_HEST_TYPE_IA32_CHECK = 0,
> +    ACPI_HEST_TYPE_IA32_CORRECTED_CHECK = 1,
> +    ACPI_HEST_TYPE_IA32_NMI = 2,
> +    ACPI_HEST_TYPE_NOT_USED3 = 3,
> +    ACPI_HEST_TYPE_NOT_USED4 = 4,
> +    ACPI_HEST_TYPE_NOT_USED5 = 5,
> +    ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
> +    ACPI_HEST_TYPE_AER_ENDPOINT = 7,
> +    ACPI_HEST_TYPE_AER_BRIDGE = 8,
> +    ACPI_HEST_TYPE_GENERIC_ERROR = 9,
> +    ACPI_HEST_TYPE_GENERIC_ERROR_V2 = 10,
> +    ACPI_HEST_TYPE_RESERVED = 11    /* 11 and greater are reserved */
> +};
> +
> +/* Values for block_status flags above */
> +#define ACPI_BERT_UNCORRECTABLE             (1)
> +#define ACPI_BERT_CORRECTABLE               (1 << 1)
> +#define ACPI_BERT_MULTIPLE_UNCORRECTABLE    (1 << 2)
> +#define ACPI_BERT_MULTIPLE_CORRECTABLE      (1 << 3)
> +/* 8 bits, error count */
> +#define ACPI_BERT_ERROR_ENTRY_COUNT         (0xFF << 4)
> +
> +/* Generic Hardware Error Source Structure */
> +struct AcpiGenericHardwareErrorSource {
> +    uint16_t type;
> +    uint16_t source_id;
> +    uint16_t related_source_id;
> +    uint8_t flags;
> +    uint8_t enabled;
> +    uint32_t number_of_records;
> +    uint32_t max_sections_per_record;
> +    uint32_t max_raw_data_length;
> +    struct acpi_generic_address error_status_address;
> +    struct acpi_hest_notify notify;
> +    uint32_t error_status_block_length;
> +} QEMU_PACKED;
> +typedef struct AcpiGenericHardwareErrorSource AcpiGenericHardwareErrorSource;
> +
> +/* Generic Hardware Error Source , version 2 */
> +struct AcpiGenericHardwareErrorSourceV2 {
> +    uint16_t type;
> +    uint16_t source_id;
> +    uint16_t related_source_id;
> +    uint8_t flags;
> +    uint8_t enabled;
> +    uint32_t number_of_records;
> +    uint32_t max_sections_per_record;
> +    uint32_t max_raw_data_length;
> +    struct acpi_generic_address error_status_address;
> +    struct acpi_hest_notify notify;
> +    uint32_t error_status_block_length;
> +    struct acpi_generic_address read_ack_register;
> +    uint64_t read_ack_preserve;
> +    uint64_t read_ack_write;
> +} QEMU_PACKED;
> +typedef struct AcpiGenericHardwareErrorSourceV2
> +            AcpiGenericHardwareErrorSourceV2;
> +
> +/* Generic Error Status block */
> +
> +struct AcpiGenericErrorStatus {
> +    uint32_t block_status;
> +    uint32_t raw_data_offset;
> +    uint32_t raw_data_length;
> +    uint32_t data_length;
> +    uint32_t error_severity;
> +};
> +typedef struct AcpiGenericErrorStatus AcpiGenericErrorStatus;
> +
> +/* Generic Error Data entry */
> +
> +struct AcpiGenericErrorData {
> +    uint8_t section_type[16];
> +    uint32_t error_severity;
> +    uint16_t revision;
> +    uint8_t validation_bits;
> +    uint8_t flags;
> +    uint32_t error_data_length;
> +    uint8_t fru_id[16];
> +    uint8_t fru_text[20];
> +};
> +typedef struct AcpiGenericErrorData AcpiGenericErrorData;
> +
> +/* Extension for revision 0x0300  */
> +struct AcpiGenericErrorDataV300 {
> +    uint8_t section_type[16];
> +    uint32_t error_severity;
> +    uint16_t revision;
> +    uint8_t validation_bits;
> +    uint8_t flags;
> +    uint32_t error_data_length;
> +    uint8_t fru_id[16];
> +    uint8_t fru_text[20];
> +    uint64_t time_stamp;
> +};
> +typedef struct AcpiGenericErrorDataV300 AcpiGenericErrorDataV300;
> +
> +enum {
> +    CPER_SEV_RECOVERABLE,
> +    CPER_SEV_FATAL,
> +    CPER_SEV_CORRECTED,
> +    CPER_SEV_INFORMATIONAL,
> +};
> +
> +/* Memory Error Section */
> +struct cper_sec_mem_err {
> +    uint64_t    validation_bits;
> +    uint64_t    error_status;
> +    uint64_t    physical_addr;
> +    uint64_t    physical_addr_mask;
> +    uint16_t    node;
> +    uint16_t    card;
> +    uint16_t    module;
> +    uint16_t    bank;
> +    uint16_t    device;
> +    uint16_t    row;
> +    uint16_t    column;
> +    uint16_t    bit_pos;
> +    uint64_t    requestor_id;
> +    uint64_t    responder_id;
> +    uint64_t    target_id;
> +    uint8_t     error_type;
> +    uint8_t     reserved;
> +    uint16_t    rank;
> +    uint16_t    mem_array_handle;   /* card handle in UEFI 2.4 */
> +    uint16_t    mem_dev_handle;     /* module handle in UEFI 2.4 */
> +};
> + typedef struct cper_sec_mem_err cper_sec_mem_err;
> +
> +/*
> + * HEST Description Table
> + */
> +struct AcpiHardwareErrorSourceTable {
> +    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
> +    uint32_t           error_source_count;
> +} QEMU_PACKED;
> +typedef struct AcpiHardwareErrorSourceTable AcpiHardwareErrorSourceTable;
> +
>  #define ACPI_SRAT_PROCESSOR_APIC     0
>  #define ACPI_SRAT_MEMORY             1
>  #define ACPI_SRAT_PROCESSOR_x2APIC   2
> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
> index 00c21f1..c1d15b3 100644
> --- a/include/hw/acpi/aml-build.h
> +++ b/include/hw/acpi/aml-build.h
> @@ -211,6 +211,7 @@ struct AcpiBuildTables {
>      GArray *rsdp;
>      GArray *tcpalog;
>      GArray *vmgenid;
> +    GArray *hardware_errors;
>      BIOSLinker *linker;
>  } AcpiBuildTables;
>  
> diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h
> new file mode 100644
> index 0000000..0cadc2b
> --- /dev/null
> +++ b/include/hw/acpi/hest_ghes.h
> @@ -0,0 +1,43 @@
> +#ifndef ACPI_GHES_H
> +#define ACPI_GHES_H
> +
> +#include "hw/acpi/bios-linker-loader.h"
> +
> +#define GHES_ERRORS_FW_CFG_FILE      "etc/hardware_errors"
> +#define GHES_DATA_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
> +
> +#define GAS_ADDRESS_OFFSET              4
> +#define ERROR_STATUS_ADDRESS_OFFSET     20
> +#define NOTIFICATION_STRUCTURE          32
> +
> +#define BFAPEI_OK   0
> +#define BFAPEI_FAIL 1
> +
> +/* The max number of error source, the error sources
> + * are classified by notification type, below is the definition
> + * 0 - Polled
> + * 1 - External Interrupt
> + * 2 - Local Interrupt
> + * 3 - SCI
> + * 4 - NMI
> + * 5 - CMCI
> + * 6 - MCE
> + * 7 - GPIO-Signal
> + * 8 - ARMv8 SEA
> + * 9 - ARMv8 SEI
> + * 10 - External Interrupt - GSIV
> + */
> +#define MAX_ERROR_SOURCE_COUNT_V6           11
> +/* The max size in Bytes for one error block */
> +#define MAX_RAW_DATA_LENGTH                 0x1000
> +
> +typedef struct GhesErrorState {
> +    uint64_t physical_addr;
> +    uint64_t ghes_addr_le[8];
> +} GhesErrorState;
> +
> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
> +                            BIOSLinker *linker);
> +void ghes_add_fw_cfg(FWCfgState *s, GArray *guid);
> +void ghes_update_guest(uint32_t notify, uint64_t physical_address);
> +#endif
> -- 
> 1.8.3.1

Dongjiu Geng May 20, 2017, 5:35 a.m. UTC | #3

Laszlo,
   sorry for the late response.

On 2017/5/13 5:00, Laszlo Ersek wrote:
> On 04/30/17 07:35, Dongjiu Geng wrote:
>> This implements APEI GHES Table by passing the error cper info
>> to the guest via a fw_cfg_blob. After a CPER info is added, an
>> SEA/SEI exception will be injected into the guest OS.
>>
>> Below is the table layout, the max number of error soure is 11,
>> which is classified by notification type.
>>
>> etc/acpi/tables                 etc/hardware_errors
>> ================     ==========================================
>>                      +-----------+
>> +--------------+     | address   |         +-> +--------------+
>> |    HEST      +     | registers |         |   | Error Status |
>> + +------------+     | +---------+         |   | Data Block 1 |
>> | | GHES1      | --> | |address1 | --------+   | +------------+
>> | | GHES2      | --> | |address2 | ------+     | |  CPER      |
>> | | GHES3      | --> | |address3 | ----+ |     | |  CPER      |
>> | |  ....      | --> | | ....... |     | |     | |  CPER      |
>> | | GHES10     | --> | |address10| -+  | |     | |  CPER      |
>> +-+------------+     +-+---------+  |  | |     +-+------------+
>>                                     |  | |
>>                                     |  | +---> +--------------+
>>                                     |  |       | Error Status |
>>                                     |  |       | Data Block 2 |
>>                                     |  |       | +------------+
>>                                     |  |       | |  CPER      |
>>                                     |  |       | |  CPER      |
>>                                     |  |       +-+------------+
>>                                     |  |
>>                                     |  +-----> +--------------+
>>                                     |          | Error Status |
>>                                     |          | Data Block 3 |
>>                                     |          | +------------+
>>                                     |          | |  CPER      |
>>                                     |          +-+------------+
>>                                     |            ...........
>>                                     +--------> +--------------+
>>                                                | Error Status |
>>                                                | Data Block 10|
>>                                                | +------------+
>>                                                | |  CPER      |
>>                                                | |  CPER      |
>>                                                | |  CPER      |
>>                                                +-+------------+
>>
>> Signed-off-by: Dongjiu Geng <[e-mail]>
>> ---
>>  default-configs/arm-softmmu.mak |   1 +
>>  hw/acpi/Makefile.objs           |   1 +
>>  hw/acpi/aml-build.c             |   2 +
>>  hw/acpi/hest_ghes.c             | 203 +++++++++++++++++++++++++++++++++++
>>  hw/arm/virt-acpi-build.c        |   6 ++
>>  include/hw/acpi/acpi-defs.h     | 227 ++++++++++++++++++++++++++++++++++++++++
>>  include/hw/acpi/aml-build.h     |   1 +
>>  include/hw/acpi/hest_ghes.h     |  43 ++++++++
>>  8 files changed, 484 insertions(+)
>>  create mode 100644 hw/acpi/hest_ghes.c
>>  create mode 100644 include/hw/acpi/hest_ghes.h
> 
> Disclaimer: I'm not an ACPI (or any kind of) QEMU maintainer, so I can
> only share my personal opinion.
  I know it, I appreciated that you can find your free time to review it.

> 
> (1) This patch is too big. It should be split in two parts at least.
> 
> The first patch should contain the new ACPI structures and macros. The
> second patch should contain the generation feature.
   OK, have splited it.

> 
> I'll reorder the diff in my response.
  thanks.

> 
>> diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
>> index 4cc3630..27adede 100644
>> --- a/include/hw/acpi/acpi-defs.h
>> +++ b/include/hw/acpi/acpi-defs.h
>> @@ -295,6 +295,58 @@ typedef struct AcpiMultipleApicTable AcpiMultipleApicTable;
>>  #define ACPI_APIC_GENERIC_TRANSLATOR    15
>>  #define ACPI_APIC_RESERVED              16   /* 16 and greater are reserved */
>>
> 
> (2) Please add a comment above the following macros: they come from the
> UEFI Spec 2.6, "N.2.5 Memory Error Section".
  good suggestion.

> 
>> +#define CPER_MEM_VALID_ERROR_STATUS     0x0001
>> +#define CPER_MEM_VALID_PA               0x0002
>> +#define CPER_MEM_VALID_PA_MASK          0x0004
>> +#define CPER_MEM_VALID_NODE             0x0008
>> +#define CPER_MEM_VALID_CARD             0x0010
>> +#define CPER_MEM_VALID_MODULE           0x0020
>> +#define CPER_MEM_VALID_BANK             0x0040
>> +#define CPER_MEM_VALID_DEVICE           0x0080
>> +#define CPER_MEM_VALID_ROW              0x0100
>> +#define CPER_MEM_VALID_COLUMN           0x0200
>> +#define CPER_MEM_VALID_BIT_POSITION     0x0400
>> +#define CPER_MEM_VALID_REQUESTOR_ID     0x0800
>> +#define CPER_MEM_VALID_RESPONDER_ID     0x1000
>> +#define CPER_MEM_VALID_TARGET_ID        0x2000
> 
> (3) _ID should be dropped.

OK.
I copied these macros from kernel code "include/linux/cper.h"
I have planed to remove the unused macros


> 
>> +#define CPER_MEM_VALID_ERROR_TYPE       0x4000
>> +#define CPER_MEM_VALID_RANK_NUMBER      0x8000
>> +#define CPER_MEM_VALID_CARD_HANDLE      0x10000
>> +#define CPER_MEM_VALID_MODULE_HANDLE    0x20000
> 
> (4) I think if you are padding the first 16 macros with zeroes on the
> left, then they should be padded to five nibbles, given that you have 18
> macros.
> 
> (5) Please prefix all of the macro names with "UEFI_".
> 
>> +
>> +typedef struct {
>> +    uint8_t b[16];
>> +} uuid_le;
>> +
>> +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)        \
>> +((uuid_le)                              \
>> +{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
>> +    (b) & 0xff, ((b) >> 8) & 0xff,                   \
>> +    (c) & 0xff, ((c) >> 8) & 0xff,                   \
>> +    (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) } })
> 
> (6) This shouldn't be necessary -- or at least not here. We already have
> "include/qemu/uuid.h".
> 
> If you need this macro, then in my opinion it should be moved to
> "include/qemu/uuid.h" (in a separate patch), and the macro should
> produce a compound literal of the QemuUUID structure type.
> 
> And, as documented for QemuUUID, it should be in big endian byte order.
> For little-endian use, it should be byte-swapped with qemu_uuid_bswap().

 I checked the struction definition in the "include/qemu/uuid.h", the QemuUUID may different
with this definition，here UUID is for the CPER section UUID. I see the spec all define them
to little-endian.

Platform Memory
•{0xA5BC1114, 0x6F64, 0x4EDE, {0xB8, 0x63, 0x3E, 0x83, 0xED, 0x7C, 0x83, 0xB1}}
PCIe}}
•{0xD995E954, 0xBBC1, 0x430F, {0xAD, 0x91, 0xB4, 0x4D, 0xCB, 0x3C, 0x6F, 0x35}}
Firmware Error Record Reference
•{0x81212A96, 0x09ED, 0x4996, {0x94, 0x71, 0x8D, 0x72, 0x9C, 0x8E, 0x69, 0xED}}
PCI/PCI-X Bus
•{0xC5753963, 0x3B84, 0x4095, {0xBF, 0x78, 0xED, 0xDA, 0xD3, 0xF9, 0xC9, 0xDD}}
PCI Component/Device
•{0xEB5E4685, 0xCA66, 0x4769, {0xB6, 0xA2, 0x26, 0x06, 0x8B, 0x00, 0x13, 0x26}}
DMAr Generic
•{0x5B51FEF7, 0xC79D, 0x4434, {0x8F, 0x1B, 0xAA,
•0x62, 0xDE, 0x3E, 0x2C, 0x64}}

> 
>> +
>> +/* Platform Memory */
>> +#define CPER_SEC_PLATFORM_MEM                   \
>> +    UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
>> +        0xED, 0x7C, 0x83, 0xB1)
> 
> (7) Please add a comment this is from UEFI 2.6 "N.2.2 Section
> Descriptor".
> 
> (8) Please prefix the macro with UEFI_.
> 
>> +
>> +/* Values for Notify Type field above */
>> +
>> +enum acpi_hest_notify_types {
>> +    ACPI_HEST_NOTIFY_POLLED = 0,
>> +    ACPI_HEST_NOTIFY_EXTERNAL = 1,
>> +    ACPI_HEST_NOTIFY_LOCAL = 2,
>> +    ACPI_HEST_NOTIFY_SCI = 3,
>> +    ACPI_HEST_NOTIFY_NMI = 4,
>> +    ACPI_HEST_NOTIFY_CMCI = 5,  /* ACPI 5.0 */
>> +    ACPI_HEST_NOTIFY_MCE = 6,   /* ACPI 5.0 */
>> +    ACPI_HEST_NOTIFY_GPIO = 7,  /* ACPI 6.0 */
>> +    ACPI_HEST_NOTIFY_SEA = 8,   /* ACPI 6.1 */
>> +    ACPI_HEST_NOTIFY_SEI = 9,   /* ACPI 6.1 */
>> +    ACPI_HEST_NOTIFY_GSIV = 10, /* ACPI 6.1 */
>> +    ACPI_HEST_NOTIFY_RESERVED = 11  /* 11 and greater are reserved */
>> +};
>> +
> 
> (9) Please add a comment that this is from the ACPI 6.1 spec, "18.3.2.9
> Hardware Error Notification".
 OK.
> 
> (10) For better or worse, type names and struct tags in this header file
> use CamelCase, and generally start with the prefix Acpi. So I think the
> above should be called "AcpiHestNotifyType" (singular).
 good suggestion.

> 
> The enum constants look good.

> 
>>  /*
>>   * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
>>   */
>> @@ -475,6 +527,181 @@ struct AcpiSystemResourceAffinityTable
>>  } QEMU_PACKED;
>>  typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
>>
>> +#define ACPI_ADR_SPACE_SYSTEM_MEMORY    (uint8_t) 0
>> +#define ACPI_ADR_SPACE_SYSTEM_IO        (uint8_t) 1
>> +#define ACPI_ADR_SPACE_PCI_CONFIG       (uint8_t) 2
>> +#define ACPI_ADR_SPACE_EC               (uint8_t) 3
>> +#define ACPI_ADR_SPACE_SMBUS            (uint8_t) 4
>> +#define ACPI_ADR_SPACE_CMOS             (uint8_t) 5
>> +#define ACPI_ADR_SPACE_PCI_BAR_TARGET   (uint8_t) 6
>> +#define ACPI_ADR_SPACE_IPMI             (uint8_t) 7
>> +#define ACPI_ADR_SPACE_GPIO             (uint8_t) 8
>> +#define ACPI_ADR_SPACE_GSBUS            (uint8_t) 9
>> +#define ACPI_ADR_SPACE_PLATFORM_COMM    (uint8_t) 10
> 
> (11) These macros are not necessary. Instead, please extend the
> AmlRegionSpace enum type in "include/hw/acpi/aml-build.h".
 OK.

> 
> (12) Additionally, where do the values 5 through 9 come from? ACPI 6.1
> "5.2.3.2 Generic Address Structure" leaves them reserved.
  good point. the values 5 through 9 from the kernel code: include/acpi/actypes.h

  #define ACPI_ADR_SPACE_SYSTEM_MEMORY    (acpi_adr_space_type) 0
  #define ACPI_ADR_SPACE_SYSTEM_IO        (acpi_adr_space_type) 1
  #define ACPI_ADR_SPACE_PCI_CONFIG       (acpi_adr_space_type) 2
  #define ACPI_ADR_SPACE_EC               (acpi_adr_space_type) 3
  #define ACPI_ADR_SPACE_SMBUS            (acpi_adr_space_type) 4
  #define ACPI_ADR_SPACE_CMOS             (acpi_adr_space_type) 5
  #define ACPI_ADR_SPACE_PCI_BAR_TARGET   (acpi_adr_space_type) 6
  #define ACPI_ADR_SPACE_IPMI             (acpi_adr_space_type) 7
  #define ACPI_ADR_SPACE_GPIO             (acpi_adr_space_type) 8
  #define ACPI_ADR_SPACE_GSBUS            (acpi_adr_space_type) 9
  #define ACPI_ADR_SPACE_PLATFORM_COMM    (acpi_adr_space_type) 10

 I planned remove the values 5 through 9.

> 
>> +
>> +/* GAS - Generic Address Structure */
>> +struct acpi_generic_address {
>> +    uint8_t space_id;       /* Address space where
>> +                             *struct or register exists
>> +                             */
>> +    uint8_t bit_width;      /* Size in bits of given register */
>> +    uint8_t bit_offset;     /* Bit offset within the register */
>> +    uint8_t access_width;   /* Minimum Access size (ACPI 3.0) */
>> +    uint64_t address;       /* 64-bit address of struct or register */
>> +} __attribute__ ((packed));
>> +
> 
> (13) This structure is already defined, see AcpiGenericAddress.
> 
>> +/* Hardware Error Notification */
>> +struct acpi_hest_notify {
>> +    uint8_t type;
>> +    uint8_t length;
>> +    uint16_t config_write_enable;
>> +    uint32_t poll_interval;
>> +    uint32_t vector;
>> +    uint32_t polling_threshold_value;
>> +    uint32_t polling_threshold_window;
>> +    uint32_t error_threshold_value;
>> +    uint32_t error_threshold_window;
>> +};
> 
> (14) Please add a comment that this is from the ACPI 6.1 spec, "18.3.2.9
> Hardware Error Notification".
> 
> (15) The structure should be called AcpiHestNotify. Please also add a
> direct typedef for it, similarly to the other struct AcpiXxxx types seen
> in this header.
> 
> (16) To the "type" field, please append a comment that the values come
> from AcpiHestNotifyType.
ok.

> 
> (17) This structure should be packed. Please add QEMU_PACKED between the
> closing brace and the semicolon.
  OK, have modified it.

> 
>> +
>> +enum acpi_hest_types {
>> +    ACPI_HEST_TYPE_IA32_CHECK = 0,
>> +    ACPI_HEST_TYPE_IA32_CORRECTED_CHECK = 1,
>> +    ACPI_HEST_TYPE_IA32_NMI = 2,
>> +    ACPI_HEST_TYPE_NOT_USED3 = 3,
>> +    ACPI_HEST_TYPE_NOT_USED4 = 4,
>> +    ACPI_HEST_TYPE_NOT_USED5 = 5,
>> +    ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
>> +    ACPI_HEST_TYPE_AER_ENDPOINT = 7,
>> +    ACPI_HEST_TYPE_AER_BRIDGE = 8,
>> +    ACPI_HEST_TYPE_GENERIC_ERROR = 9,
>> +    ACPI_HEST_TYPE_GENERIC_ERROR_V2 = 10,
>> +    ACPI_HEST_TYPE_RESERVED = 11    /* 11 and greater are reserved */
>> +};
> 
> (18) Please add a comment that these are from ACPI 6.1, sections
> "18.3.2.1 IA-32 Architecture Machine Check Exception" through "18.3.2.8
> Generic Hardware Error Source version 2".
> 
> (19) The type name should be "AcpiHestSourceType" (singular).
> 
> (20) I think the enum constants should be renamed to
> ACPI_HEST_SOURCE_xxx, from ACPI_HEST_TYPE_xxx.
> 
> (21) I think the NOT_USED{3,4,5} enum constants should be removed.
 OK.

> 
>> +
>> +/* Values for block_status flags above */
> 
> (22) Here I think we should only say, 'Block Status bitmasks from ACPI
> 6.1, "18.3.2.7.1 Generic Error Data"'. The block_status field that you
> refer to is not above, it comes later.
> 
>> +#define ACPI_BERT_UNCORRECTABLE             (1)
>> +#define ACPI_BERT_CORRECTABLE               (1 << 1)
>> +#define ACPI_BERT_MULTIPLE_UNCORRECTABLE    (1 << 2)
>> +#define ACPI_BERT_MULTIPLE_CORRECTABLE      (1 << 3)
>> +/* 8 bits, error count */
>> +#define ACPI_BERT_ERROR_ENTRY_COUNT         (0xFF << 4)
>>
> 
> (23) Any particular reason to call these BERT? The "Boot Error Record
> Table" is specified in "18.3.1 Boot Error Source", but the block status
> bitmasks don't look related.
> 
> To me ACPI_GEBS_xxx ("generic error block status") seems like a more
> fitting prefix.
  good point, it indeed confused other people with such "ACPI_BERT_xxxx" prefix.


> 
> +
>> +/* Generic Hardware Error Source Structure */
>> +struct AcpiGenericHardwareErrorSource {
>> +    uint16_t type;
>> +    uint16_t source_id;
>> +    uint16_t related_source_id;
>> +    uint8_t flags;
>> +    uint8_t enabled;
>> +    uint32_t number_of_records;
>> +    uint32_t max_sections_per_record;
>> +    uint32_t max_raw_data_length;
>> +    struct acpi_generic_address error_status_address;
>> +    struct acpi_hest_notify notify;
>> +    uint32_t error_status_block_length;
>> +} QEMU_PACKED;
>> +typedef struct AcpiGenericHardwareErrorSource AcpiGenericHardwareErrorSource;
> 
> (24) This looks good to me in general.
> 
> I suggest adding a reference to ACPI 6.1 "18.3.2.7 Generic Hardware
> Error Source". Also, I think we should mention that "type" has to be
> ACPI_HEST_SOURCE_GENERIC_ERROR.
 Ok.

> 
>> +
>> +/* Generic Hardware Error Source , version 2 */
>> +struct AcpiGenericHardwareErrorSourceV2 {
>> +    uint16_t type;
>> +    uint16_t source_id;
>> +    uint16_t related_source_id;
>> +    uint8_t flags;
>> +    uint8_t enabled;
>> +    uint32_t number_of_records;
>> +    uint32_t max_sections_per_record;
>> +    uint32_t max_raw_data_length;
>> +    struct acpi_generic_address error_status_address;
>> +    struct acpi_hest_notify notify;
>> +    uint32_t error_status_block_length;
>> +    struct acpi_generic_address read_ack_register;
>> +    uint64_t read_ack_preserve;
>> +    uint64_t read_ack_write;
>> +} QEMU_PACKED;
>> +typedef struct AcpiGenericHardwareErrorSourceV2
>> +            AcpiGenericHardwareErrorSourceV2;
> 
> (25) Same comments; I suggest adding a reference to "18.3.2.8 Generic
> Hardware Error Source version 2", and mentioning
> ACPI_HEST_SOURCE_GENERIC_ERROR_V2 for the "type" field.
> 
>> +
>> +/* Generic Error Status block */
>> +
>> +struct AcpiGenericErrorStatus {
>> +    uint32_t block_status;
>> +    uint32_t raw_data_offset;
>> +    uint32_t raw_data_length;
>> +    uint32_t data_length;
>> +    uint32_t error_severity;
>> +};
>> +typedef struct AcpiGenericErrorStatus AcpiGenericErrorStatus;
>> +
> 
> (26) Please mention that this is from ACPI 6.1, "18.3.2.7.1 Generic
> Error Data".
> 
> (27) Near the block_status field, we should point out that it is a
> bitmask composed of ACPI_GEBS_xxx macros.
> 
> (28) QEMU_PACKED is missing. (It will make no difference in practice,
> but I recommend it for consistency and documentation purposes.)
 OK. will do it.

> 
>> +/* Generic Error Data entry */
>> +
>> +struct AcpiGenericErrorData {
>> +    uint8_t section_type[16];
>> +    uint32_t error_severity;
>> +    uint16_t revision;
>> +    uint8_t validation_bits;
>> +    uint8_t flags;
>> +    uint32_t error_data_length;
>> +    uint8_t fru_id[16];
>> +    uint8_t fru_text[20];
>> +};
>> +typedef struct AcpiGenericErrorData AcpiGenericErrorData;
> 
> (29) Please point to ACPI 6.1, "18.3.2.7.1 Generic Error Data" again, in
> the leading comment.
> 
> (30) QEMU_PACKED is missing.
> 
> (31) I think we should use the QemuUUID type for the "section_type"
> field. And, in order to make it clear that it has little endian
> encoding, let's call it "section_type_le".
> 
> An added benefit is that in the code, the field can be set with a simple
> structure assignment from UEFI_CPER_SEC_PLATFORM_MEM (and then can be
> byte-swapped in place, for little endiannes, with qemu_uuid_bswap()).
good suggestion, will follow that.

> 
>> +
>> +/* Extension for revision 0x0300  */
>> +struct AcpiGenericErrorDataV300 {
>> +    uint8_t section_type[16];
>> +    uint32_t error_severity;
>> +    uint16_t revision;
>> +    uint8_t validation_bits;
>> +    uint8_t flags;
>> +    uint32_t error_data_length;
>> +    uint8_t fru_id[16];
>> +    uint8_t fru_text[20];
>> +    uint64_t time_stamp;
>> +};
>> +typedef struct AcpiGenericErrorDataV300 AcpiGenericErrorDataV300;
>> +
> 
> (32) Same comments as (29), (30), (31) above.
> 
> (33) Actually, do we need both AcpiGenericErrorData and
> AcpiGenericErrorDataV300? In the code we seem to be using only the
> former. On the other hand, in the spec I can see only the latter. Where
> does AcpiGenericErrorData come from?
> 

 The AcpiGenericErrorData come from "ACPI_5.0A", link is here: http://www.acpi.info/spec50a.htm

 The revision number of the error data is 0x0201 for "AcpiGenericErrorData"
 The revision number of the error data is 0x0300 for "AcpiGenericErrorDataV300"

>> +enum {
>> +    CPER_SEV_RECOVERABLE,
>> +    CPER_SEV_FATAL,
>> +    CPER_SEV_CORRECTED,
>> +    CPER_SEV_INFORMATIONAL,
>> +};
> 
> (34) I suggest giving a name to this type, for example
> AcpiGenericErrorSeverity.
> 
> (35) The enumeration constants should start with ACPI_.
OK.

> 
> (36) I suggest moving this type above AcpiGenericErrorData and
> AcpiGenericErrorDataV300, and remarking on the "error_severity" fields
> that they take their values from AcpiGenericErrorSeverity.
> 
> (37) Where does "INFORMATIONAL" come from? In ACPI 6.1, "18.3.2.7.1
> Generic Error Data", I see "None" for value 3.
> 
>> +
>> +/* Memory Error Section */
>> +struct cper_sec_mem_err {
>> +    uint64_t    validation_bits;
>> +    uint64_t    error_status;
>> +    uint64_t    physical_addr;
>> +    uint64_t    physical_addr_mask;
>> +    uint16_t    node;
>> +    uint16_t    card;
>> +    uint16_t    module;
>> +    uint16_t    bank;
>> +    uint16_t    device;
>> +    uint16_t    row;
>> +    uint16_t    column;
>> +    uint16_t    bit_pos;
>> +    uint64_t    requestor_id;
>> +    uint64_t    responder_id;
>> +    uint64_t    target_id;
>> +    uint8_t     error_type;
>> +    uint8_t     reserved;
>> +    uint16_t    rank;
>> +    uint16_t    mem_array_handle;   /* card handle in UEFI 2.4 */
>> +    uint16_t    mem_dev_handle;     /* module handle in UEFI 2.4 */
>> +};
>> + typedef struct cper_sec_mem_err cper_sec_mem_err;
> 
> (38) Please add a comment that is is from UEFI 2.6, "N.2.5 Memory Error
> Section".
> 
> (39) The structure and the typedef should be called "UefiCperSecMemErr".
> 
> (40) I suggest adding a comment to "validation_bits" that it is a
> bitmask composed of CPER_MEM_VALID_xxx macros.
> 
> (41) QEMU_PACKED is missing.
 will modify it.

> 
>> +
>> +/*
>> + * HEST Description Table
>> + */
>> +struct AcpiHardwareErrorSourceTable {
>> +    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
>> +    uint32_t           error_source_count;
>> +} QEMU_PACKED;
>> +typedef struct AcpiHardwareErrorSourceTable AcpiHardwareErrorSourceTable;
>> +
>>  #define ACPI_SRAT_PROCESSOR_APIC     0
>>  #define ACPI_SRAT_MEMORY             1
>>  #define ACPI_SRAT_PROCESSOR_x2APIC   2
> 
> Next file:
> 
>> diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h
>> new file mode 100644
>> index 0000000..0cadc2b
>> --- /dev/null
>> +++ b/include/hw/acpi/hest_ghes.h
>> @@ -0,0 +1,43 @@
>> +#ifndef ACPI_GHES_H
>> +#define ACPI_GHES_H
>> +
>> +#include "hw/acpi/bios-linker-loader.h"
>> +
>> +#define GHES_ERRORS_FW_CFG_FILE      "etc/hardware_errors"
>> +#define GHES_DATA_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
>> +
>> +#define GAS_ADDRESS_OFFSET              4
>> +#define ERROR_STATUS_ADDRESS_OFFSET     20
>> +#define NOTIFICATION_STRUCTURE          32
>> +
>> +#define BFAPEI_OK   0
>> +#define BFAPEI_FAIL 1
>> +
>> +/* The max number of error source, the error sources
>> + * are classified by notification type, below is the definition
>> + * 0 - Polled
>> + * 1 - External Interrupt
>> + * 2 - Local Interrupt
>> + * 3 - SCI
>> + * 4 - NMI
>> + * 5 - CMCI
>> + * 6 - MCE
>> + * 7 - GPIO-Signal
>> + * 8 - ARMv8 SEA
>> + * 9 - ARMv8 SEI
>> + * 10 - External Interrupt - GSIV
>> + */
>> +#define MAX_ERROR_SOURCE_COUNT_V6           11
> 
> I'll have to review this header file more thoroughly, once I see the
> code that references these macros. For now, I have one comment:
> 
> (42) I think the notification type list should be removed from this
> location. Also, the open-coded value 11 should be replaced with
> the ACPI_HEST_NOTIFY_RESERVED enumeration constant.
 agree with you. in your suggested way, it is easy to extend.

> 
> I will try to continue reviewing this patch sometime next week (second
> half of the week at the earliest, I think).
 Ok, it is not hurry, you can find your free time to review it

> 
> Please feel free to disagree with my comments; I prefer to write down
> everything that crosses my mind. It's encouraged to raise
> counter-arguments.

 many thanks for your detailed suggestion.
> 
> Thanks
> Laszlo
> 
>> +/* The max size in Bytes for one error block */
>> +#define MAX_RAW_DATA_LENGTH                 0x1000
>> +
>> +typedef struct GhesErrorState {
>> +    uint64_t physical_addr;
>> +    uint64_t ghes_addr_le[8];
>> +} GhesErrorState;
>> +
>> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
>> +                            BIOSLinker *linker);
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *guid);
>> +void ghes_update_guest(uint32_t notify, uint64_t physical_address);
>> +#endif
>>
> 
>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
>> index 0835e59..e7ab5dc 100644
>> --- a/hw/arm/virt-acpi-build.c
>> +++ b/hw/arm/virt-acpi-build.c
>> @@ -45,6 +45,8 @@
>>  #include "hw/arm/virt.h"
>>  #include "sysemu/numa.h"
>>  #include "kvm_arm.h"
>> +#include "hw/acpi/vmgenid.h"
>> +#include "hw/acpi/hest_ghes.h"
>>
>>  #define ARM_SPI_BASE 32
>>  #define ACPI_POWER_BUTTON_DEVICE "PWRB"
>> @@ -778,6 +780,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>>      acpi_add_table(table_offsets, tables_blob);
>>      build_spcr(tables_blob, tables->linker, vms);
>>
>> +    acpi_add_table(table_offsets, tables_blob);
>> +    ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker);
>> +
>>      if (nb_numa_nodes > 0) {
>>          acpi_add_table(table_offsets, tables_blob);
>>          build_srat(tables_blob, tables->linker, vms);
>> @@ -892,6 +897,7 @@ void virt_acpi_setup(VirtMachineState *vms)
>>
>>      build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
>>                                                ACPI_BUILD_RSDP_FILE, 0);
>> +    ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
>>
>>      qemu_register_reset(virt_acpi_build_reset, build_state);
>>      virt_acpi_build_reset(build_state);
> 
>> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
>> index 1e3bd2b..d5f1552 100644
>> --- a/default-configs/arm-softmmu.mak
>> +++ b/default-configs/arm-softmmu.mak
>> @@ -121,3 +121,4 @@ CONFIG_ACPI=y
>>  CONFIG_SMBIOS=y
>>  CONFIG_ASPEED_SOC=y
>>  CONFIG_GPIO_KEY=y
>> +CONFIG_ACPI_APEI_GENERATION=y
> 
>> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
>> index 11c35bc..776b46e 100644
>> --- a/hw/acpi/Makefile.objs
>> +++ b/hw/acpi/Makefile.objs
>> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
>>  common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
>>  common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>>  common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
>> +common-obj-$(CONFIG_ACPI_APEI_GENERATION) += hest_ghes.o
>>  common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>>
>>  common-obj-y += acpi_interface.o
> 
>> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
>> index c6f2032..802b98d 100644
>> --- a/hw/acpi/aml-build.c
>> +++ b/hw/acpi/aml-build.c
>> @@ -1560,6 +1560,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
>>      tables->table_data = g_array_new(false, true /* clear */, 1);
>>      tables->tcpalog = g_array_new(false, true /* clear */, 1);
>>      tables->vmgenid = g_array_new(false, true /* clear */, 1);
>> +    tables->hardware_errors = g_array_new(false, true /* clear */, 1);
>>      tables->linker = bios_linker_loader_init();
>>  }
>>
>> @@ -1570,6 +1571,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
>>      g_array_free(tables->table_data, true);
>>      g_array_free(tables->tcpalog, mfre);
>>      g_array_free(tables->vmgenid, mfre);
>> +    g_array_free(tables->hardware_errors, mfre);
>>  }
>>
>>  /* Build rsdt table */
> 
>> diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c
>> new file mode 100644
>> index 0000000..91d382e
>> --- /dev/null
>> +++ b/hw/acpi/hest_ghes.c
>> @@ -0,0 +1,203 @@
>> +/*
>> + *  APEI GHES table Generation
>> + *
>> + *  Copyright (C) 2017 huawei.
>> + *
>> + *  Author: Dongjiu Geng <[e-mail]>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>> + * See the COPYING file in the top-level directory.
>> + *
>> + */
>> +
>> +#include "qemu/osdep.h"
>> +#include "qmp-commands.h"
>> +#include "hw/acpi/acpi.h"
>> +#include "hw/acpi/aml-build.h"
>> +#include "hw/acpi/hest_ghes.h"
>> +#include "hw/nvram/fw_cfg.h"
>> +#include "sysemu/sysemu.h"
>> +
>> +static int ghes_generate_cper_record(uint64_t block_error_address,
>> +                                    uint64_t error_physical_addr)
>> +{
>> +    AcpiGenericErrorStatus block;
>> +    AcpiGenericErrorData *gdata;
>> +    struct cper_sec_mem_err *mem_err;
>> +    uint64_t block_data_length;
>> +    unsigned char *buffer;
>> +
>> +    cpu_physical_memory_read(block_error_address, &block,
>> +                                sizeof(AcpiGenericErrorStatus));
>> +
>> +    block_data_length = sizeof(AcpiGenericErrorStatus) + block.data_length;
>> +
>> +    /* If the Generic Error Status Block is NULL, update
>> +     * the block header
>> +     */
>> +    if (!block.block_status) {
>> +        block.block_status = ACPI_BERT_UNCORRECTABLE;
>> +        block.error_severity = CPER_SEV_FATAL;
>> +    }
>> +
>> +    block.data_length += sizeof(AcpiGenericErrorData);
>> +    block.data_length += sizeof(struct cper_sec_mem_err);
>> +
>> +    /* Write back the Generic Error Status Block to guest memory */
>> +    cpu_physical_memory_write(block_error_address, &block,
>> +                        sizeof(AcpiGenericErrorStatus));
>> +
>> +    /* Fill in Generic Error Data Entry */
>> +    buffer = g_malloc(sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
>> +    memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
>> +    gdata = (AcpiGenericErrorData *)buffer;
>> +
>> +    memcpy(gdata->section_type, (void *) &CPER_SEC_PLATFORM_MEM,
>> +                sizeof(uuid_le));
>> +    gdata->error_data_length = sizeof(struct cper_sec_mem_err);
>> +
>> +    mem_err = (struct cper_sec_mem_err *) (gdata + 1);
>> +
>> +    /* In order to simplify simulation, hardcode the CPER section to memory
>> +     * section.
>> +     */
>> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_TYPE;
>> +    mem_err->error_type = 3;
>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_PA;
>> +    mem_err->physical_addr = error_physical_addr;
>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_CARD | CPER_MEM_VALID_MODULE |
>> +            CPER_MEM_VALID_BANK | CPER_MEM_VALID_ROW |
>> +            CPER_MEM_VALID_COLUMN | CPER_MEM_VALID_BIT_POSITION;
>> +    mem_err->card = 1;
>> +    mem_err->module = 2;
>> +    mem_err->bank = 3;
>> +    mem_err->row = 1;
>> +    mem_err->column = 2;
>> +    mem_err->bit_pos = 5;
>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_STATUS;
>> +    mem_err->error_status = 4 << 8;
>> +
>> +    /* Write back the Generic Error Data Entry to guest memory */
>> +    cpu_physical_memory_write(block_error_address + block_data_length, buffer,
>> +                    sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
>> +
>> +    g_free(buffer);
>> +    return BFAPEI_OK;
>> +}
>> +
>> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
>> +                                            BIOSLinker *linker)
>> +{
>> +    Aml *hest;
>> +    uint32_t address_registers_offset;
>> +    AcpiTableHeader *header;
>> +    AcpiGenericHardwareErrorSource *error_source;
>> +    int i;
>> +
>> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
>> +
>> +    /* New address register and Error status block table size*/
>> +    g_array_set_size(hardware_error, MAX_ERROR_SOURCE_COUNT_V6
>> +                                        * block_reqr_size);
>> +
>> +    /* Put this in a HEST table */
>> +    hest = init_aml_allocator();
>> +    address_registers_offset = table_data->len
>> +                                + sizeof(AcpiHardwareErrorSourceTable)
>> +                                + ERROR_STATUS_ADDRESS_OFFSET
>> +                                + GAS_ADDRESS_OFFSET;
>> +    /* Reserve space for HEST table size*/
>> +    acpi_data_push(hest->buf, sizeof(AcpiHardwareErrorSourceTable)
>> +                                + MAX_ERROR_SOURCE_COUNT_V6
>> +                                * sizeof(AcpiGenericHardwareErrorSource));
>> +
>> +    g_array_append_vals(table_data, hest->buf->data, hest->buf->len);
>> +    /* Allocate guest memory for the Data fw_cfg blob */
>> +    bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE,
>> +                            hardware_error, 4096,
>> +                            false /* page boundary, high memory */);
>> +    header = (AcpiTableHeader *)(table_data->data
>> +                        + table_data->len - hest->buf->len);
>> +    *(uint32_t *)(header + 1) = MAX_ERROR_SOURCE_COUNT_V6;
>> +    error_source = (AcpiGenericHardwareErrorSource *)((char *)header
>> +                                    + sizeof(AcpiHardwareErrorSourceTable));
>> +
>> +    for (i = 0; i < MAX_ERROR_SOURCE_COUNT_V6; i++) {
>> +        error_source->type = ACPI_HEST_TYPE_GENERIC_ERROR;
>> +        error_source->source_id = 0;
>> +        error_source->related_source_id = 0xffff;
>> +        error_source->flags = 0;
>> +        error_source->enabled = 1;
>> +        error_source->number_of_records = 1;
>> +        error_source->max_sections_per_record = 1;
>> +        error_source->max_raw_data_length = MAX_RAW_DATA_LENGTH;
>> +        error_source->error_status_address.space_id =
>> +                                    ACPI_ADR_SPACE_SYSTEM_MEMORY;
>> +        error_source->error_status_address.bit_width = 64;
>> +        error_source->error_status_address.bit_offset = 0;
>> +        error_source->error_status_address.access_width = 4;
>> +        error_source->notify.type = i;
>> +        error_source->notify.length = sizeof(AcpiGenericHardwareErrorSource);
>> +
>> +        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
>> +                                sizeof(uint64_t) * i, sizeof(uint64_t),
>> +                                GHES_ERRORS_FW_CFG_FILE,
>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>> +                                i * MAX_RAW_DATA_LENGTH);
>> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>> +                    address_registers_offset
>> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
>> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>> +                    i * sizeof(uint64_t));
>> +
>> +        bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
>> +                                i * sizeof(uint64_t), sizeof(uint64_t),
>> +                                GHES_ERRORS_FW_CFG_FILE,
>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>> +                                i * MAX_RAW_DATA_LENGTH);
>> +         error_source++;
>> +    }
>> +
>> +     build_header(linker, table_data,
>> +        (void *)header, "HEST", hest->buf->len, 1, NULL, "GHES");
>> +
>> +    free_aml_allocator();
>> +}
>> +
>> +static GhesErrorState ges;
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
>> +{
>> +
>> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
>> +    int size = MAX_ERROR_SOURCE_COUNT_V6 * block_reqr_size;
>> +
>> +    /* Create a read-only fw_cfg file for GHES */
>> +    fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
>> +                    size);
>> +    /* Create a read-write fw_cfg file for Address */
>> +    fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
>> +                            &(ges.ghes_addr_le[0]),
>> +                            sizeof(uint64_t) * MAX_ERROR_SOURCE_COUNT_V6,
>> +                            false);
>> +}
>> +
>> +void ghes_update_guest(uint32_t notify, uint64_t physical_address)
>> +{
>> +    uint64_t block_error_addr;
>> +
>> +    if (physical_address) {
>> +        ges.physical_addr = physical_address;
>> +        block_error_addr = ges.ghes_addr_le[notify];
>> +        block_error_addr = le32_to_cpu(block_error_addr);
>> +
>> +        /* A zero value in ghes_addr means that BIOS has not yet written
>> +         * the address
>> +         */
>> +        if (block_error_addr) {
>> +            ghes_generate_cper_record(block_error_addr, physical_address);
>> +        }
>> +    }
>> +}
> 
>> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
>> index 00c21f1..c1d15b3 100644
>> --- a/include/hw/acpi/aml-build.h
>> +++ b/include/hw/acpi/aml-build.h
>> @@ -211,6 +211,7 @@ struct AcpiBuildTables {
>>      GArray *rsdp;
>>      GArray *tcpalog;
>>      GArray *vmgenid;
>> +    GArray *hardware_errors;
>>      BIOSLinker *linker;
>>  } AcpiBuildTables;
>>
> 
> .
>

Dongjiu Geng May 20, 2017, 5:47 a.m. UTC | #4

Michael,
   very sorry for the late response due to recently busy.


On 2017/5/13 7:59, Michael S. Tsirkin wrote:
> On Sun, Apr 30, 2017 at 01:35:03PM +0800, Dongjiu Geng wrote:
>> This implements APEI GHES Table by passing the error cper info
>> to the guest via a fw_cfg_blob. After a CPER info is added, an
>> SEA/SEI exception will be injected into the guest OS.
>>
>> Below is the table layout, the max number of error soure is 11,
>> which is classified by notification type.
>>
>> etc/acpi/tables                 etc/hardware_errors
>> ================     ==========================================
>>                      +-----------+
>> +--------------+     | address   |         +-> +--------------+
>> |    HEST      +     | registers |         |   | Error Status |
>> + +------------+     | +---------+         |   | Data Block 1 |
>> | | GHES1      | --> | |address1 | --------+   | +------------+
>> | | GHES2      | --> | |address2 | ------+     | |  CPER      |
>> | | GHES3      | --> | |address3 | ----+ |     | |  CPER      |
>> | |  ....      | --> | | ....... |     | |     | |  CPER      |
>> | | GHES10     | --> | |address10| -+  | |     | |  CPER      |
>> +-+------------+     +-+---------+  |  | |     +-+------------+
>>                                     |  | |
>>                                     |  | +---> +--------------+
>>                                     |  |       | Error Status |
>>                                     |  |       | Data Block 2 |
>>                                     |  |       | +------------+
>>                                     |  |       | |  CPER      |
>>                                     |  |       | |  CPER      |
>>                                     |  |       +-+------------+
>>                                     |  |
>>                                     |  +-----> +--------------+
>>                                     |          | Error Status |
>>                                     |          | Data Block 3 |
>>                                     |          | +------------+
>>                                     |          | |  CPER      |
>>                                     |          +-+------------+
>>                                     |            ...........
>>                                     +--------> +--------------+
>>                                                | Error Status |
>>                                                | Data Block 10|
>>                                                | +------------+
>>                                                | |  CPER      |
>>                                                | |  CPER      |
>>                                                | |  CPER      |
>>                                                +-+------------+
>>
>> Signed-off-by: Dongjiu Geng <[e-mail]>
>> ---
>>  default-configs/arm-softmmu.mak |   1 +
>>  hw/acpi/Makefile.objs           |   1 +
>>  hw/acpi/aml-build.c             |   2 +
>>  hw/acpi/hest_ghes.c             | 203 +++++++++++++++++++++++++++++++++++
>>  hw/arm/virt-acpi-build.c        |   6 ++
>>  include/hw/acpi/acpi-defs.h     | 227 ++++++++++++++++++++++++++++++++++++++++
>>  include/hw/acpi/aml-build.h     |   1 +
>>  include/hw/acpi/hest_ghes.h     |  43 ++++++++
>>  8 files changed, 484 insertions(+)
>>  create mode 100644 hw/acpi/hest_ghes.c
>>  create mode 100644 include/hw/acpi/hest_ghes.h
>>
>> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
>> index 1e3bd2b..d5f1552 100644
>> --- a/default-configs/arm-softmmu.mak
>> +++ b/default-configs/arm-softmmu.mak
>> @@ -121,3 +121,4 @@ CONFIG_ACPI=y
>>  CONFIG_SMBIOS=y
>>  CONFIG_ASPEED_SOC=y
>>  CONFIG_GPIO_KEY=y
>> +CONFIG_ACPI_APEI_GENERATION=y
>> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
>> index 11c35bc..776b46e 100644
>> --- a/hw/acpi/Makefile.objs
>> +++ b/hw/acpi/Makefile.objs
>> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
>>  common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
>>  common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>>  common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
>> +common-obj-$(CONFIG_ACPI_APEI_GENERATION) += hest_ghes.o
>>  common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>>  
>>  common-obj-y += acpi_interface.o
>> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
>> index c6f2032..802b98d 100644
>> --- a/hw/acpi/aml-build.c
>> +++ b/hw/acpi/aml-build.c
>> @@ -1560,6 +1560,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
>>      tables->table_data = g_array_new(false, true /* clear */, 1);
>>      tables->tcpalog = g_array_new(false, true /* clear */, 1);
>>      tables->vmgenid = g_array_new(false, true /* clear */, 1);
>> +    tables->hardware_errors = g_array_new(false, true /* clear */, 1);
>>      tables->linker = bios_linker_loader_init();
>>  }
>>  
>> @@ -1570,6 +1571,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
>>      g_array_free(tables->table_data, true);
>>      g_array_free(tables->tcpalog, mfre);
>>      g_array_free(tables->vmgenid, mfre);
>> +    g_array_free(tables->hardware_errors, mfre);
>>  }
>>  
>>  /* Build rsdt table */
>> diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c
>> new file mode 100644
>> index 0000000..91d382e
>> --- /dev/null
>> +++ b/hw/acpi/hest_ghes.c
>> @@ -0,0 +1,203 @@
>> +/*
>> + *  APEI GHES table Generation
>> + *
>> + *  Copyright (C) 2017 huawei.
>> + *
>> + *  Author: Dongjiu Geng <[e-mail]>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>> + * See the COPYING file in the top-level directory.
>> + *
>> + */
>> +
>> +#include "qemu/osdep.h"
>> +#include "qmp-commands.h"
>> +#include "hw/acpi/acpi.h"
>> +#include "hw/acpi/aml-build.h"
>> +#include "hw/acpi/hest_ghes.h"
>> +#include "hw/nvram/fw_cfg.h"
>> +#include "sysemu/sysemu.h"
>> +
>> +static int ghes_generate_cper_record(uint64_t block_error_address,
>> +                                    uint64_t error_physical_addr)
>> +{
>> +    AcpiGenericErrorStatus block;
>> +    AcpiGenericErrorData *gdata;
>> +    struct cper_sec_mem_err *mem_err;
>> +    uint64_t block_data_length;
>> +    unsigned char *buffer;
>> +
>> +    cpu_physical_memory_read(block_error_address, &block,
>> +                                sizeof(AcpiGenericErrorStatus));
>> +
>> +    block_data_length = sizeof(AcpiGenericErrorStatus) + block.data_length;
>> +
>> +    /* If the Generic Error Status Block is NULL, update
>> +     * the block header
>> +     */
>> +    if (!block.block_status) {
>> +        block.block_status = ACPI_BERT_UNCORRECTABLE;
>> +        block.error_severity = CPER_SEV_FATAL;
>> +    }
>> +
>> +    block.data_length += sizeof(AcpiGenericErrorData);
>> +    block.data_length += sizeof(struct cper_sec_mem_err);
>> +
>> +    /* Write back the Generic Error Status Block to guest memory */
>> +    cpu_physical_memory_write(block_error_address, &block,
>> +                        sizeof(AcpiGenericErrorStatus));
>> +
>> +    /* Fill in Generic Error Data Entry */
>> +    buffer = g_malloc(sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
>> +    memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
>> +    gdata = (AcpiGenericErrorData *)buffer;
>> +
>> +    memcpy(gdata->section_type, (void *) &CPER_SEC_PLATFORM_MEM,
>> +                sizeof(uuid_le));
>> +    gdata->error_data_length = sizeof(struct cper_sec_mem_err);
>> +
>> +    mem_err = (struct cper_sec_mem_err *) (gdata + 1);
>> +
>> +    /* In order to simplify simulation, hardcode the CPER section to memory
>> +     * section.
>> +     */
>> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_TYPE;
>> +    mem_err->error_type = 3;
>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_PA;
>> +    mem_err->physical_addr = error_physical_addr;
>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_CARD | CPER_MEM_VALID_MODULE |
>> +            CPER_MEM_VALID_BANK | CPER_MEM_VALID_ROW |
>> +            CPER_MEM_VALID_COLUMN | CPER_MEM_VALID_BIT_POSITION;
>> +    mem_err->card = 1;
>> +    mem_err->module = 2;
>> +    mem_err->bank = 3;
>> +    mem_err->row = 1;
>> +    mem_err->column = 2;
>> +    mem_err->bit_pos = 5;
>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_STATUS;
>> +    mem_err->error_status = 4 << 8;
>> +
>> +    /* Write back the Generic Error Data Entry to guest memory */
>> +    cpu_physical_memory_write(block_error_address + block_data_length, buffer,
>> +                    sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
>> +
>> +    g_free(buffer);
>> +    return BFAPEI_OK;
>> +}
>> +
>> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
>> +                                            BIOSLinker *linker)
>> +{
>> +    Aml *hest;
>> +    uint32_t address_registers_offset;
>> +    AcpiTableHeader *header;
>> +    AcpiGenericHardwareErrorSource *error_source;
>> +    int i;
>> +
>> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
>> +
>> +    /* New address register and Error status block table size*/
>> +    g_array_set_size(hardware_error, MAX_ERROR_SOURCE_COUNT_V6
>> +                                        * block_reqr_size);
>> +
>> +    /* Put this in a HEST table */
>> +    hest = init_aml_allocator();
>> +    address_registers_offset = table_data->len
>> +                                + sizeof(AcpiHardwareErrorSourceTable)
>> +                                + ERROR_STATUS_ADDRESS_OFFSET
>> +                                + GAS_ADDRESS_OFFSET;
>> +    /* Reserve space for HEST table size*/
>> +    acpi_data_push(hest->buf, sizeof(AcpiHardwareErrorSourceTable)
>> +                                + MAX_ERROR_SOURCE_COUNT_V6
>> +                                * sizeof(AcpiGenericHardwareErrorSource));
>> +
>> +    g_array_append_vals(table_data, hest->buf->data, hest->buf->len);
>> +    /* Allocate guest memory for the Data fw_cfg blob */
>> +    bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE,
>> +                            hardware_error, 4096,
>> +                            false /* page boundary, high memory */);
>> +    header = (AcpiTableHeader *)(table_data->data
>> +                        + table_data->len - hest->buf->len);
>> +    *(uint32_t *)(header + 1) = MAX_ERROR_SOURCE_COUNT_V6;
>> +    error_source = (AcpiGenericHardwareErrorSource *)((char *)header
>> +                                    + sizeof(AcpiHardwareErrorSourceTable));
>> +
>> +    for (i = 0; i < MAX_ERROR_SOURCE_COUNT_V6; i++) {
>> +        error_source->type = ACPI_HEST_TYPE_GENERIC_ERROR;
>> +        error_source->source_id = 0;
>> +        error_source->related_source_id = 0xffff;
>> +        error_source->flags = 0;
>> +        error_source->enabled = 1;
>> +        error_source->number_of_records = 1;
>> +        error_source->max_sections_per_record = 1;
>> +        error_source->max_raw_data_length = MAX_RAW_DATA_LENGTH;
>> +        error_source->error_status_address.space_id =
>> +                                    ACPI_ADR_SPACE_SYSTEM_MEMORY;
>> +        error_source->error_status_address.bit_width = 64;
>> +        error_source->error_status_address.bit_offset = 0;
>> +        error_source->error_status_address.access_width = 4;
>> +        error_source->notify.type = i;
>> +        error_source->notify.length = sizeof(AcpiGenericHardwareErrorSource);
>> +
>> +        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
>> +                                sizeof(uint64_t) * i, sizeof(uint64_t),
>> +                                GHES_ERRORS_FW_CFG_FILE,
>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>> +                                i * MAX_RAW_DATA_LENGTH);
>> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>> +                    address_registers_offset
>> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
>> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>> +                    i * sizeof(uint64_t));
>> +
>> +        bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
>> +                                i * sizeof(uint64_t), sizeof(uint64_t),
>> +                                GHES_ERRORS_FW_CFG_FILE,
>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>> +                                i * MAX_RAW_DATA_LENGTH);
>> +         error_source++;
>> +    }
>> +
>> +     build_header(linker, table_data,
>> +        (void *)header, "HEST", hest->buf->len, 1, NULL, "GHES");
>> +
>> +    free_aml_allocator();
>> +}
>> +
>> +static GhesErrorState ges;
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
>> +{
>> +
>> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
>> +    int size = MAX_ERROR_SOURCE_COUNT_V6 * block_reqr_size;
>> +
>> +    /* Create a read-only fw_cfg file for GHES */
>> +    fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
>> +                    size);
>> +    /* Create a read-write fw_cfg file for Address */
>> +    fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
>> +                            &(ges.ghes_addr_le[0]),
>> +                            sizeof(uint64_t) * MAX_ERROR_SOURCE_COUNT_V6,
>> +                            false);
>> +}
>> +
>> +void ghes_update_guest(uint32_t notify, uint64_t physical_address)
>> +{
>> +    uint64_t block_error_addr;
>> +
>> +    if (physical_address) {
>> +        ges.physical_addr = physical_address;
>> +        block_error_addr = ges.ghes_addr_le[notify];
>> +        block_error_addr = le32_to_cpu(block_error_addr);
>> +
>> +        /* A zero value in ghes_addr means that BIOS has not yet written
>> +         * the address
>> +         */
>> +        if (block_error_addr) {
>> +            ghes_generate_cper_record(block_error_addr, physical_address);
>> +        }
>> +    }
>> +}
>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
>> index 0835e59..e7ab5dc 100644
>> --- a/hw/arm/virt-acpi-build.c
>> +++ b/hw/arm/virt-acpi-build.c
>> @@ -45,6 +45,8 @@
>>  #include "hw/arm/virt.h"
>>  #include "sysemu/numa.h"
>>  #include "kvm_arm.h"
>> +#include "hw/acpi/vmgenid.h"
>> +#include "hw/acpi/hest_ghes.h"
>>  
>>  #define ARM_SPI_BASE 32
>>  #define ACPI_POWER_BUTTON_DEVICE "PWRB"
>> @@ -778,6 +780,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>>      acpi_add_table(table_offsets, tables_blob);
>>      build_spcr(tables_blob, tables->linker, vms);
>>  
>> +    acpi_add_table(table_offsets, tables_blob);
>> +    ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker);
>> +
>>      if (nb_numa_nodes > 0) {
>>          acpi_add_table(table_offsets, tables_blob);
>>          build_srat(tables_blob, tables->linker, vms);
>> @@ -892,6 +897,7 @@ void virt_acpi_setup(VirtMachineState *vms)
>>  
>>      build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
>>                                                ACPI_BUILD_RSDP_FILE, 0);
>> +    ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
>>  
>>      qemu_register_reset(virt_acpi_build_reset, build_state);
>>      virt_acpi_build_reset(build_state);
>> diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
>> index 4cc3630..27adede 100644
>> --- a/include/hw/acpi/acpi-defs.h
>> +++ b/include/hw/acpi/acpi-defs.h
>> @@ -295,6 +295,58 @@ typedef struct AcpiMultipleApicTable AcpiMultipleApicTable;
>>  #define ACPI_APIC_GENERIC_TRANSLATOR    15
>>  #define ACPI_APIC_RESERVED              16   /* 16 and greater are reserved */
>>  
>> +#define CPER_MEM_VALID_ERROR_STATUS     0x0001
>> +#define CPER_MEM_VALID_PA               0x0002
>> +#define CPER_MEM_VALID_PA_MASK          0x0004
>> +#define CPER_MEM_VALID_NODE             0x0008
>> +#define CPER_MEM_VALID_CARD             0x0010
>> +#define CPER_MEM_VALID_MODULE           0x0020
>> +#define CPER_MEM_VALID_BANK             0x0040
>> +#define CPER_MEM_VALID_DEVICE           0x0080
>> +#define CPER_MEM_VALID_ROW              0x0100
>> +#define CPER_MEM_VALID_COLUMN           0x0200
>> +#define CPER_MEM_VALID_BIT_POSITION     0x0400
>> +#define CPER_MEM_VALID_REQUESTOR_ID     0x0800
>> +#define CPER_MEM_VALID_RESPONDER_ID     0x1000
>> +#define CPER_MEM_VALID_TARGET_ID        0x2000
>> +#define CPER_MEM_VALID_ERROR_TYPE       0x4000
>> +#define CPER_MEM_VALID_RANK_NUMBER      0x8000
>> +#define CPER_MEM_VALID_CARD_HANDLE      0x10000
>> +#define CPER_MEM_VALID_MODULE_HANDLE    0x20000
>> +
>> +typedef struct {
>> +    uint8_t b[16];
>> +} uuid_le;
>> +
>> +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)        \
>> +((uuid_le)                              \
>> +{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
>> +    (b) & 0xff, ((b) >> 8) & 0xff,                   \
>> +    (c) & 0xff, ((c) >> 8) & 0xff,                   \
>> +    (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) } })
>> +
>> +/* Platform Memory */
>> +#define CPER_SEC_PLATFORM_MEM                   \
>> +    UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
>> +        0xED, 0x7C, 0x83, 0xB1)
>> +
> 
> There's no reason to define these messy one-time use macros.
> They just make it hard to look things up in the spec.
  will remove these definition.
> 
> 
> You can use build_append_int_noprefix to add data of
> any length in LE format.
  good suggestion.

> 
> 
>> +/* Values for Notify Type field above */
>> +
>> +enum acpi_hest_notify_types {
>> +    ACPI_HEST_NOTIFY_POLLED = 0,
>> +    ACPI_HEST_NOTIFY_EXTERNAL = 1,
>> +    ACPI_HEST_NOTIFY_LOCAL = 2,
>> +    ACPI_HEST_NOTIFY_SCI = 3,
>> +    ACPI_HEST_NOTIFY_NMI = 4,
>> +    ACPI_HEST_NOTIFY_CMCI = 5,  /* ACPI 5.0 */
>> +    ACPI_HEST_NOTIFY_MCE = 6,   /* ACPI 5.0 */
>> +    ACPI_HEST_NOTIFY_GPIO = 7,  /* ACPI 6.0 */
>> +    ACPI_HEST_NOTIFY_SEA = 8,   /* ACPI 6.1 */
>> +    ACPI_HEST_NOTIFY_SEI = 9,   /* ACPI 6.1 */
>> +    ACPI_HEST_NOTIFY_GSIV = 10, /* ACPI 6.1 */
>> +    ACPI_HEST_NOTIFY_RESERVED = 11  /* 11 and greater are reserved */
>> +};
>> +
> 
> these are never reused, it's best
> 
>>  /*
>>   * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
>>   */
>> @@ -475,6 +527,181 @@ struct AcpiSystemResourceAffinityTable
>>  } QEMU_PACKED;
>>  typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
>>  
>> +#define ACPI_ADR_SPACE_SYSTEM_MEMORY    (uint8_t) 0
>> +#define ACPI_ADR_SPACE_SYSTEM_IO        (uint8_t) 1
>> +#define ACPI_ADR_SPACE_PCI_CONFIG       (uint8_t) 2
>> +#define ACPI_ADR_SPACE_EC               (uint8_t) 3
>> +#define ACPI_ADR_SPACE_SMBUS            (uint8_t) 4
>> +#define ACPI_ADR_SPACE_CMOS             (uint8_t) 5
>> +#define ACPI_ADR_SPACE_PCI_BAR_TARGET   (uint8_t) 6
>> +#define ACPI_ADR_SPACE_IPMI             (uint8_t) 7
>> +#define ACPI_ADR_SPACE_GPIO             (uint8_t) 8
>> +#define ACPI_ADR_SPACE_GSBUS            (uint8_t) 9
>> +#define ACPI_ADR_SPACE_PLATFORM_COMM    (uint8_t) 10
>> +
> 
> We already have macros for some of these and APIs to
> format it.
in the qemu code "include/hw/acpi/aml-build.h".
I see there are some definition, but it is incomplete, anyway I will remove these macros.

  typedef enum {
      AML_SYSTEM_MEMORY = 0X00,
      AML_SYSTEM_IO = 0X01,
      AML_PCI_CONFIG = 0X02,
 } AmlRegionSpace;



> 
>> +/* GAS - Generic Address Structure */
>> +struct acpi_generic_address {
>> +    uint8_t space_id;       /* Address space where
>> +                             *struct or register exists
>> +                             */
>> +    uint8_t bit_width;      /* Size in bits of given register */
>> +    uint8_t bit_offset;     /* Bit offset within the register */
>> +    uint8_t access_width;   /* Minimum Access size (ACPI 3.0) */
>> +    uint64_t address;       /* 64-bit address of struct or register */
>> +} __attribute__ ((packed));
>> +
>> +/* Hardware Error Notification */
>> +struct acpi_hest_notify {
>> +    uint8_t type;
>> +    uint8_t length;
>> +    uint16_t config_write_enable;
>> +    uint32_t poll_interval;
>> +    uint32_t vector;
>> +    uint32_t polling_threshold_value;
>> +    uint32_t polling_threshold_window;
>> +    uint32_t error_threshold_value;
>> +    uint32_t error_threshold_window;
>> +};
>> +
>> +enum acpi_hest_types {
>> +    ACPI_HEST_TYPE_IA32_CHECK = 0,
>> +    ACPI_HEST_TYPE_IA32_CORRECTED_CHECK = 1,
>> +    ACPI_HEST_TYPE_IA32_NMI = 2,
>> +    ACPI_HEST_TYPE_NOT_USED3 = 3,
>> +    ACPI_HEST_TYPE_NOT_USED4 = 4,
>> +    ACPI_HEST_TYPE_NOT_USED5 = 5,
>> +    ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
>> +    ACPI_HEST_TYPE_AER_ENDPOINT = 7,
>> +    ACPI_HEST_TYPE_AER_BRIDGE = 8,
>> +    ACPI_HEST_TYPE_GENERIC_ERROR = 9,
>> +    ACPI_HEST_TYPE_GENERIC_ERROR_V2 = 10,
>> +    ACPI_HEST_TYPE_RESERVED = 11    /* 11 and greater are reserved */
>> +};
>> +
>> +/* Values for block_status flags above */
>> +#define ACPI_BERT_UNCORRECTABLE             (1)
>> +#define ACPI_BERT_CORRECTABLE               (1 << 1)
>> +#define ACPI_BERT_MULTIPLE_UNCORRECTABLE    (1 << 2)
>> +#define ACPI_BERT_MULTIPLE_CORRECTABLE      (1 << 3)
>> +/* 8 bits, error count */
>> +#define ACPI_BERT_ERROR_ENTRY_COUNT         (0xFF << 4)
>> +
>> +/* Generic Hardware Error Source Structure */
>> +struct AcpiGenericHardwareErrorSource {
>> +    uint16_t type;
>> +    uint16_t source_id;
>> +    uint16_t related_source_id;
>> +    uint8_t flags;
>> +    uint8_t enabled;
>> +    uint32_t number_of_records;
>> +    uint32_t max_sections_per_record;
>> +    uint32_t max_raw_data_length;
>> +    struct acpi_generic_address error_status_address;
>> +    struct acpi_hest_notify notify;
>> +    uint32_t error_status_block_length;
>> +} QEMU_PACKED;
>> +typedef struct AcpiGenericHardwareErrorSource AcpiGenericHardwareErrorSource;
>> +
>> +/* Generic Hardware Error Source , version 2 */
>> +struct AcpiGenericHardwareErrorSourceV2 {
>> +    uint16_t type;
>> +    uint16_t source_id;
>> +    uint16_t related_source_id;
>> +    uint8_t flags;
>> +    uint8_t enabled;
>> +    uint32_t number_of_records;
>> +    uint32_t max_sections_per_record;
>> +    uint32_t max_raw_data_length;
>> +    struct acpi_generic_address error_status_address;
>> +    struct acpi_hest_notify notify;
>> +    uint32_t error_status_block_length;
>> +    struct acpi_generic_address read_ack_register;
>> +    uint64_t read_ack_preserve;
>> +    uint64_t read_ack_write;
>> +} QEMU_PACKED;
>> +typedef struct AcpiGenericHardwareErrorSourceV2
>> +            AcpiGenericHardwareErrorSourceV2;
>> +
>> +/* Generic Error Status block */
>> +
>> +struct AcpiGenericErrorStatus {
>> +    uint32_t block_status;
>> +    uint32_t raw_data_offset;
>> +    uint32_t raw_data_length;
>> +    uint32_t data_length;
>> +    uint32_t error_severity;
>> +};
>> +typedef struct AcpiGenericErrorStatus AcpiGenericErrorStatus;
>> +
>> +/* Generic Error Data entry */
>> +
>> +struct AcpiGenericErrorData {
>> +    uint8_t section_type[16];
>> +    uint32_t error_severity;
>> +    uint16_t revision;
>> +    uint8_t validation_bits;
>> +    uint8_t flags;
>> +    uint32_t error_data_length;
>> +    uint8_t fru_id[16];
>> +    uint8_t fru_text[20];
>> +};
>> +typedef struct AcpiGenericErrorData AcpiGenericErrorData;
>> +
>> +/* Extension for revision 0x0300  */
>> +struct AcpiGenericErrorDataV300 {
>> +    uint8_t section_type[16];
>> +    uint32_t error_severity;
>> +    uint16_t revision;
>> +    uint8_t validation_bits;
>> +    uint8_t flags;
>> +    uint32_t error_data_length;
>> +    uint8_t fru_id[16];
>> +    uint8_t fru_text[20];
>> +    uint64_t time_stamp;
>> +};
>> +typedef struct AcpiGenericErrorDataV300 AcpiGenericErrorDataV300;
>> +
>> +enum {
>> +    CPER_SEV_RECOVERABLE,
>> +    CPER_SEV_FATAL,
>> +    CPER_SEV_CORRECTED,
>> +    CPER_SEV_INFORMATIONAL,
>> +};
>> +
>> +/* Memory Error Section */
>> +struct cper_sec_mem_err {
>> +    uint64_t    validation_bits;
>> +    uint64_t    error_status;
>> +    uint64_t    physical_addr;
>> +    uint64_t    physical_addr_mask;
>> +    uint16_t    node;
>> +    uint16_t    card;
>> +    uint16_t    module;
>> +    uint16_t    bank;
>> +    uint16_t    device;
>> +    uint16_t    row;
>> +    uint16_t    column;
>> +    uint16_t    bit_pos;
>> +    uint64_t    requestor_id;
>> +    uint64_t    responder_id;
>> +    uint64_t    target_id;
>> +    uint8_t     error_type;
>> +    uint8_t     reserved;
>> +    uint16_t    rank;
>> +    uint16_t    mem_array_handle;   /* card handle in UEFI 2.4 */
>> +    uint16_t    mem_dev_handle;     /* module handle in UEFI 2.4 */
>> +};
>> + typedef struct cper_sec_mem_err cper_sec_mem_err;
>> +
>> +/*
>> + * HEST Description Table
>> + */
>> +struct AcpiHardwareErrorSourceTable {
>> +    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
>> +    uint32_t           error_source_count;
>> +} QEMU_PACKED;
>> +typedef struct AcpiHardwareErrorSourceTable AcpiHardwareErrorSourceTable;
>> +
>>  #define ACPI_SRAT_PROCESSOR_APIC     0
>>  #define ACPI_SRAT_MEMORY             1
>>  #define ACPI_SRAT_PROCESSOR_x2APIC   2
>> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
>> index 00c21f1..c1d15b3 100644
>> --- a/include/hw/acpi/aml-build.h
>> +++ b/include/hw/acpi/aml-build.h
>> @@ -211,6 +211,7 @@ struct AcpiBuildTables {
>>      GArray *rsdp;
>>      GArray *tcpalog;
>>      GArray *vmgenid;
>> +    GArray *hardware_errors;
>>      BIOSLinker *linker;
>>  } AcpiBuildTables;
>>  
>> diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h
>> new file mode 100644
>> index 0000000..0cadc2b
>> --- /dev/null
>> +++ b/include/hw/acpi/hest_ghes.h
>> @@ -0,0 +1,43 @@
>> +#ifndef ACPI_GHES_H
>> +#define ACPI_GHES_H
>> +
>> +#include "hw/acpi/bios-linker-loader.h"
>> +
>> +#define GHES_ERRORS_FW_CFG_FILE      "etc/hardware_errors"
>> +#define GHES_DATA_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
>> +
>> +#define GAS_ADDRESS_OFFSET              4
>> +#define ERROR_STATUS_ADDRESS_OFFSET     20
>> +#define NOTIFICATION_STRUCTURE          32
>> +
>> +#define BFAPEI_OK   0
>> +#define BFAPEI_FAIL 1
>> +
>> +/* The max number of error source, the error sources
>> + * are classified by notification type, below is the definition
>> + * 0 - Polled
>> + * 1 - External Interrupt
>> + * 2 - Local Interrupt
>> + * 3 - SCI
>> + * 4 - NMI
>> + * 5 - CMCI
>> + * 6 - MCE
>> + * 7 - GPIO-Signal
>> + * 8 - ARMv8 SEA
>> + * 9 - ARMv8 SEI
>> + * 10 - External Interrupt - GSIV
>> + */
>> +#define MAX_ERROR_SOURCE_COUNT_V6           11
>> +/* The max size in Bytes for one error block */
>> +#define MAX_RAW_DATA_LENGTH                 0x1000
>> +
>> +typedef struct GhesErrorState {
>> +    uint64_t physical_addr;
>> +    uint64_t ghes_addr_le[8];
>> +} GhesErrorState;
>> +
>> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
>> +                            BIOSLinker *linker);
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *guid);
>> +void ghes_update_guest(uint32_t notify, uint64_t physical_address);
>> +#endif
>> -- 
>> 1.8.3.1
> 
> .
>

Laszlo Ersek May 22, 2017, 2:23 p.m. UTC | #5

Keeping some context:

On 05/12/17 23:00, Laszlo Ersek wrote:
> On 04/30/17 07:35, Dongjiu Geng wrote:
>> This implements APEI GHES Table by passing the error cper info
>> to the guest via a fw_cfg_blob. After a CPER info is added, an
>> SEA/SEI exception will be injected into the guest OS.
>>
>> Below is the table layout, the max number of error soure is 11,
>> which is classified by notification type.
>>
>> etc/acpi/tables                 etc/hardware_errors
>> ================     ==========================================
>>                      +-----------+
>> +--------------+     | address   |         +-> +--------------+
>> |    HEST      +     | registers |         |   | Error Status |
>> + +------------+     | +---------+         |   | Data Block 1 |
>> | | GHES1      | --> | |address1 | --------+   | +------------+
>> | | GHES2      | --> | |address2 | ------+     | |  CPER      |
>> | | GHES3      | --> | |address3 | ----+ |     | |  CPER      |
>> | |  ....      | --> | | ....... |     | |     | |  CPER      |
>> | | GHES10     | --> | |address10| -+  | |     | |  CPER      |
>> +-+------------+     +-+---------+  |  | |     +-+------------+
>>                                     |  | |
>>                                     |  | +---> +--------------+
>>                                     |  |       | Error Status |
>>                                     |  |       | Data Block 2 |
>>                                     |  |       | +------------+
>>                                     |  |       | |  CPER      |
>>                                     |  |       | |  CPER      |
>>                                     |  |       +-+------------+
>>                                     |  |
>>                                     |  +-----> +--------------+
>>                                     |          | Error Status |
>>                                     |          | Data Block 3 |
>>                                     |          | +------------+
>>                                     |          | |  CPER      |
>>                                     |          +-+------------+
>>                                     |            ...........
>>                                     +--------> +--------------+
>>                                                | Error Status |
>>                                                | Data Block 10|
>>                                                | +------------+
>>                                                | |  CPER      |
>>                                                | |  CPER      |
>>                                                | |  CPER      |
>>                                                +-+------------+
>>
>> Signed-off-by: Dongjiu Geng <[e-mail]>
>> ---
>>  default-configs/arm-softmmu.mak |   1 +
>>  hw/acpi/Makefile.objs           |   1 +
>>  hw/acpi/aml-build.c             |   2 +
>>  hw/acpi/hest_ghes.c             | 203 +++++++++++++++++++++++++++++++++++
>>  hw/arm/virt-acpi-build.c        |   6 ++
>>  include/hw/acpi/acpi-defs.h     | 227 ++++++++++++++++++++++++++++++++++++++++
>>  include/hw/acpi/aml-build.h     |   1 +
>>  include/hw/acpi/hest_ghes.h     |  43 ++++++++
>>  8 files changed, 484 insertions(+)
>>  create mode 100644 hw/acpi/hest_ghes.c
>>  create mode 100644 include/hw/acpi/hest_ghes.h

> Next file:
>
>> diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h
>> new file mode 100644
>> index 0000000..0cadc2b
>> --- /dev/null
>> +++ b/include/hw/acpi/hest_ghes.h
>> @@ -0,0 +1,43 @@
>> +#ifndef ACPI_GHES_H
>> +#define ACPI_GHES_H
>> +
>> +#include "hw/acpi/bios-linker-loader.h"
>> +
>> +#define GHES_ERRORS_FW_CFG_FILE      "etc/hardware_errors"
>> +#define GHES_DATA_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
>> +
>> +#define GAS_ADDRESS_OFFSET              4
>> +#define ERROR_STATUS_ADDRESS_OFFSET     20
>> +#define NOTIFICATION_STRUCTURE          32
>> +
>> +#define BFAPEI_OK   0
>> +#define BFAPEI_FAIL 1
>> +
>> +/* The max number of error source, the error sources
>> + * are classified by notification type, below is the definition
>> + * 0 - Polled
>> + * 1 - External Interrupt
>> + * 2 - Local Interrupt
>> + * 3 - SCI
>> + * 4 - NMI
>> + * 5 - CMCI
>> + * 6 - MCE
>> + * 7 - GPIO-Signal
>> + * 8 - ARMv8 SEA
>> + * 9 - ARMv8 SEI
>> + * 10 - External Interrupt - GSIV
>> + */
>> +#define MAX_ERROR_SOURCE_COUNT_V6           11
>
> I'll have to review this header file more thoroughly, once I see the
> code that references these macros. For now, I have one comment:
>
> (42) I think the notification type list should be removed from this
> location. Also, the open-coded value 11 should be replaced with
> the ACPI_HEST_NOTIFY_RESERVED enumeration constant.
>
> I will try to continue reviewing this patch sometime next week (second
> half of the week at the earliest, I think).

(43) I think all macros introduced in this header should all start with
"GHES_".

>
>> +/* The max size in Bytes for one error block */
>> +#define MAX_RAW_DATA_LENGTH                 0x1000
>> +
>> +typedef struct GhesErrorState {
>> +    uint64_t physical_addr;
>> +    uint64_t ghes_addr_le[8];
>> +} GhesErrorState;

(44) Should this be called "GhesState" instead (dropping "Error")?

(45) (This is a question for other reviewers) I have no idea if this
abstraction should be a device (sysbus or otherwise). Should it be a
device? Below we have a static ("global") variable of this type, which
is quite unusual.

(46) What is "physical_addr" good for? Below I can only see an
assignment to it, in ghes_update_guest(). Where is the field read?

(47) "ghes_addr_le" should be an array of eight uint8_t elements (for
representing a single uint64_t in little endian). The declaration above
has a typo; the element type is currently specified as uint64_t.

It suffices for the firmware to pass the base address of
"etc/hardware_errors" back to QEMU, all the other addresses can be
computed in QEMU as needed.

(If, for some reason you *do* need to pass back multiple addresses, then
you should use

  uint8_t xxxx_addr_le[N][8];

But even in this case, setting N to 8 doesn't look useful, because we
have 11 error sources / notification types.)

>> +
>> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
>> +                            BIOSLinker *linker);
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *guid);

(48) The second parameter should be called "hardware_errors", not
"guid".

>> +void ghes_update_guest(uint32_t notify, uint64_t physical_address);

(49) Can you call the second parameter "error_physical_addr"?

>> +#endif
>>

>> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
>> index 1e3bd2b..d5f1552 100644
>> --- a/default-configs/arm-softmmu.mak
>> +++ b/default-configs/arm-softmmu.mak
>> @@ -121,3 +121,4 @@ CONFIG_ACPI=y
>>  CONFIG_SMBIOS=y
>>  CONFIG_ASPEED_SOC=y
>>  CONFIG_GPIO_KEY=y
>> +CONFIG_ACPI_APEI_GENERATION=y

>> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
>> index 11c35bc..776b46e 100644
>> --- a/hw/acpi/Makefile.objs
>> +++ b/hw/acpi/Makefile.objs
>> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
>>  common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
>>  common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
>>  common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
>> +common-obj-$(CONFIG_ACPI_APEI_GENERATION) += hest_ghes.o
>>  common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
>>
>>  common-obj-y += acpi_interface.o

(50) I think "CONFIG_ACPI_APEI" would be more succinct.

>> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
>> index 00c21f1..c1d15b3 100644
>> --- a/include/hw/acpi/aml-build.h
>> +++ b/include/hw/acpi/aml-build.h
>> @@ -211,6 +211,7 @@ struct AcpiBuildTables {
>>      GArray *rsdp;
>>      GArray *tcpalog;
>>      GArray *vmgenid;
>> +    GArray *hardware_errors;
>>      BIOSLinker *linker;
>>  } AcpiBuildTables;
>>

>> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
>> index c6f2032..802b98d 100644
>> --- a/hw/acpi/aml-build.c
>> +++ b/hw/acpi/aml-build.c
>> @@ -1560,6 +1560,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
>>      tables->table_data = g_array_new(false, true /* clear */, 1);
>>      tables->tcpalog = g_array_new(false, true /* clear */, 1);
>>      tables->vmgenid = g_array_new(false, true /* clear */, 1);
>> +    tables->hardware_errors = g_array_new(false, true /* clear */, 1);
>>      tables->linker = bios_linker_loader_init();
>>  }
>>
>> @@ -1570,6 +1571,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
>>      g_array_free(tables->table_data, true);
>>      g_array_free(tables->tcpalog, mfre);
>>      g_array_free(tables->vmgenid, mfre);
>> +    g_array_free(tables->hardware_errors, mfre);
>>  }
>>
>>  /* Build rsdt table */

Looks good to me.

>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
>> index 0835e59..e7ab5dc 100644
>> --- a/hw/arm/virt-acpi-build.c
>> +++ b/hw/arm/virt-acpi-build.c
>> @@ -45,6 +45,8 @@
>>  #include "hw/arm/virt.h"
>>  #include "sysemu/numa.h"
>>  #include "kvm_arm.h"
>> +#include "hw/acpi/vmgenid.h"

(51) I think this include directive is not necessary.

>> +#include "hw/acpi/hest_ghes.h"
>>
>>  #define ARM_SPI_BASE 32
>>  #define ACPI_POWER_BUTTON_DEVICE "PWRB"
>> @@ -778,6 +780,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
>>      acpi_add_table(table_offsets, tables_blob);
>>      build_spcr(tables_blob, tables->linker, vms);
>>
>> +    acpi_add_table(table_offsets, tables_blob);
>> +    ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker);
>> +
>>      if (nb_numa_nodes > 0) {
>>          acpi_add_table(table_offsets, tables_blob);
>>          build_srat(tables_blob, tables->linker, vms);
>> @@ -892,6 +897,7 @@ void virt_acpi_setup(VirtMachineState *vms)
>>
>>      build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
>>                                                ACPI_BUILD_RSDP_FILE, 0);
>> +    ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
>>
>>      qemu_register_reset(virt_acpi_build_reset, build_state);
>>      virt_acpi_build_reset(build_state);

(52) I think for consistency with existing code, this function call
should be placed between the ACPI_BUILD_TPMLOG_FILE line and the
acpi_add_rom_blob() line.

>> diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c
>> new file mode 100644
>> index 0000000..91d382e
>> --- /dev/null
>> +++ b/hw/acpi/hest_ghes.c
>> @@ -0,0 +1,203 @@
>> +/*
>> + *  APEI GHES table Generation
>> + *
>> + *  Copyright (C) 2017 huawei.
>> + *
>> + *  Author: Dongjiu Geng <[e-mail]>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>> + * See the COPYING file in the top-level directory.
>> + *
>> + */
>> +
>> +#include "qemu/osdep.h"
>> +#include "qmp-commands.h"
>> +#include "hw/acpi/acpi.h"
>> +#include "hw/acpi/aml-build.h"
>> +#include "hw/acpi/hest_ghes.h"
>> +#include "hw/nvram/fw_cfg.h"
>> +#include "sysemu/sysemu.h"
>> +
>> +static int ghes_generate_cper_record(uint64_t block_error_address,
>> +                                    uint64_t error_physical_addr)
>> +{
>> +    AcpiGenericErrorStatus block;
>> +    AcpiGenericErrorData *gdata;
>> +    struct cper_sec_mem_err *mem_err;
>> +    uint64_t block_data_length;
>> +    unsigned char *buffer;
>> +
>> +    cpu_physical_memory_read(block_error_address, &block,
>> +                                sizeof(AcpiGenericErrorStatus));
>> +
>> +    block_data_length = sizeof(AcpiGenericErrorStatus) + block.data_length;

(53) "block.data_length" must surely be converted from LE to
host-endian, so please wrap it with le32_to_cpu().

>> +
>> +    /* If the Generic Error Status Block is NULL, update
>> +     * the block header
>> +     */
>> +    if (!block.block_status) {
>> +        block.block_status = ACPI_BERT_UNCORRECTABLE;
>> +        block.error_severity = CPER_SEV_FATAL;
>> +    }
>> +
>> +    block.data_length += sizeof(AcpiGenericErrorData);
>> +    block.data_length += sizeof(struct cper_sec_mem_err);

(54) Conversion between LE and host-endian is missing.

(55) What happens if you run out of the preallocated memory?

>> +
>> +    /* Write back the Generic Error Status Block to guest memory */
>> +    cpu_physical_memory_write(block_error_address, &block,
>> +                        sizeof(AcpiGenericErrorStatus));
>> +
>> +    /* Fill in Generic Error Data Entry */
>> +    buffer = g_malloc(sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
>> +    memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));

(56) Please use g_malloc0() instead.

>> +    gdata = (AcpiGenericErrorData *)buffer;
>> +
>> +    memcpy(gdata->section_type, (void *) &CPER_SEC_PLATFORM_MEM,
>> +                sizeof(uuid_le));
>> +    gdata->error_data_length = sizeof(struct cper_sec_mem_err);

(57) Endianness conversion missing (cpu_to_le32()).

>> +
>> +    mem_err = (struct cper_sec_mem_err *) (gdata + 1);
>> +
>> +    /* In order to simplify simulation, hardcode the CPER section to memory
>> +     * section.
>> +     */
>> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_TYPE;
>> +    mem_err->error_type = 3;

(58) Is this supposed to stand for "Multi-bit ECC" (from "N.2.5 Memory
Error Section" in UEFI 2.6)? Should we have a macro for that?

>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_PA;
>> +    mem_err->physical_addr = error_physical_addr;

(59) Conversion between host and little endian is missing on all four
lines above.

>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_CARD | CPER_MEM_VALID_MODULE |
>> +            CPER_MEM_VALID_BANK | CPER_MEM_VALID_ROW |
>> +            CPER_MEM_VALID_COLUMN | CPER_MEM_VALID_BIT_POSITION;
>> +    mem_err->card = 1;
>> +    mem_err->module = 2;
>> +    mem_err->bank = 3;
>> +    mem_err->row = 1;
>> +    mem_err->column = 2;
>> +    mem_err->bit_pos = 5;

(60) I have no idea where these values come from.

>> +
>> +    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_STATUS;
>> +    mem_err->error_status = 4 << 8;
>> +
>> +    /* Write back the Generic Error Data Entry to guest memory */
>> +    cpu_physical_memory_write(block_error_address + block_data_length, buffer,
>> +                    sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));

(61) Please choose a better name for "block_data_length" -- it stands
for the length *before* the increment.

(62) Is it safe to write out the increased block length before writing
the new CPER data?

>> +
>> +    g_free(buffer);
>> +    return BFAPEI_OK;
>> +}

(63) This return code is not used. Can we remove it perhaps (together
with the BFAPEI_* macros)?

>> +
>> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
>> +                                            BIOSLinker *linker)
>> +{
>> +    Aml *hest;
>> +    uint32_t address_registers_offset;
>> +    AcpiTableHeader *header;
>> +    AcpiGenericHardwareErrorSource *error_source;
>> +    int i;
>> +
>> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;

(64) What does "reqr" stand for?

>> +
>> +    /* New address register and Error status block table size*/
>> +    g_array_set_size(hardware_error, MAX_ERROR_SOURCE_COUNT_V6
>> +                                        * block_reqr_size);

(65) The QEMU coding style is

    g_array_set_size(hardware_error, MAX_ERROR_SOURCE_COUNT_V6 *
                                     block_reqr_size);

That is, the operator is at the end of the line.

Several function calls below are affected by this; please fix them all
up.

Running "scripts/checkpatch.pl" on the patches before you post them
should help catch this kind of problem early.

>> +
>> +    /* Put this in a HEST table */
>> +    hest = init_aml_allocator();
>> +    address_registers_offset = table_data->len
>> +                                + sizeof(AcpiHardwareErrorSourceTable)
>> +                                + ERROR_STATUS_ADDRESS_OFFSET
>> +                                + GAS_ADDRESS_OFFSET;

(66) Please drop the ERROR_STATUS_ADDRESS_OFFSET and GAS_ADDRESS_OFFSET
macros (from the header file as well), and use the following expressions
instead:

  ...
  offsetof(AcpiGenericHardwareErrorSource, error_status_address) +
  offsetof(AcpiGenericAddress, address);

>> +    /* Reserve space for HEST table size*/
>> +    acpi_data_push(hest->buf, sizeof(AcpiHardwareErrorSourceTable)
>> +                                + MAX_ERROR_SOURCE_COUNT_V6
>> +                                * sizeof(AcpiGenericHardwareErrorSource));
>> +
>> +    g_array_append_vals(table_data, hest->buf->data, hest->buf->len);

(67) HEST is a data table, it contains no AML. Accordingly, you use
"hest" *only* for pushing zero bytes to "table_data".

But that's not a good enough reason to have "hest" at all, or to call
init_aml_allocator() / free_aml_allocator(). Instead, please just
calculate the needed size, and push that many bytes directly to
"table_data".

Your current code already populates those bytes within "table_data", so
that's good.

>> +    /* Allocate guest memory for the Data fw_cfg blob */
>> +    bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE,
>> +                            hardware_error, 4096,
>> +                            false /* page boundary, high memory */);

(68) In the code below, you are not taking an "OVMF header probe
suppressor" into account.

But, we have already planned to replace that quirk with a separate,
dedicated allocation hint or command, so I'm not going to describe what
an "OVMF header probe suppressor" is; instead, I'll describe the
replacement for it.

So please add a new patch to the series that does the following:

- In "hw/acpi/bios-linker-loader.c", modify the documentation of
  "BiosLinkerLoaderEntry.alloc.zone". The most significant bit (i.e.,
  bit 7), when set, should mean that @alloc.file contains no ACPI
  tables. When the bit is clear, no information is given about the
  contents of @alloc.file (i.e., same as now).

- This will require a small patch for SeaBIOS: mask off bit 7 of
  "entry->alloc.zone" in the switch statement in
  romfile_loader_allocate(), "src/fw/romfile_loader.c". SeaBIOS does not
  have to care about this bit.

- OVMF will need some code to handle this bit specially, but I will
  write that.

- In QEMU, please modify the bios_linker_loader_alloc() function so that
  it takes a "noacpi" boolean as well, and set the high bit of
  "entry.alloc.zone" from it. The default value for "noacpi" should be
  false, at all currently existing call sites.

- And finally, in this patch, we should pass "true" as "noacpi".

>> +    header = (AcpiTableHeader *)(table_data->data
>> +                        + table_data->len - hest->buf->len);
>> +    *(uint32_t *)(header + 1) = MAX_ERROR_SOURCE_COUNT_V6;

(69) Ugh, this is ugly. Please access the error source count field
through "AcpiHardwareErrorSourceTable.error_source_count".

>> +    error_source = (AcpiGenericHardwareErrorSource *)((char *)header
>> +                                    + sizeof(AcpiHardwareErrorSourceTable));
>> +
>> +    for (i = 0; i < MAX_ERROR_SOURCE_COUNT_V6; i++) {
>> +        error_source->type = ACPI_HEST_TYPE_GENERIC_ERROR;
>> +        error_source->source_id = 0;

(70) I think this is wrong, this identifier should be unique among all
error sources. You should assign cpu_to_le16(i).

>> +        error_source->related_source_id = 0xffff;
>> +        error_source->flags = 0;
>> +        error_source->enabled = 1;
>> +        error_source->number_of_records = 1;

(71) Why do we pre-alloc only one record? Don't several CPER objects fit
in an error status data block (of size MAX_RAW_DATA_LENGTH, 0x1000)?

>> +        error_source->max_sections_per_record = 1;
>> +        error_source->max_raw_data_length = MAX_RAW_DATA_LENGTH;
>> +        error_source->error_status_address.space_id =
>> +                                    ACPI_ADR_SPACE_SYSTEM_MEMORY;
>> +        error_source->error_status_address.bit_width = 64;
>> +        error_source->error_status_address.bit_offset = 0;
>> +        error_source->error_status_address.access_width = 4;
>> +        error_source->notify.type = i;

OK, this is one byte wide only.

>> +        error_source->notify.length = sizeof(AcpiGenericHardwareErrorSource);

(72) This seems to be wrong. The right hand side should be
sizeof(AcpiHestNotify).

>> +
>> +        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
>> +                                sizeof(uint64_t) * i, sizeof(uint64_t),
>> +                                GHES_ERRORS_FW_CFG_FILE,
>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>> +                                i * MAX_RAW_DATA_LENGTH);

(73) Looks good, but please indent the arguments 1 position relative to
the opening paren.

>> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>> +                    address_registers_offset
>> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
>> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>> +                    i * sizeof(uint64_t));

(74) Passing "sizeof(uint32_t)" as "dst_patched_size" is wrong. The
address registers at the start of the "etc/hardware_errors" blob are
64-bit wide each.

>> +
>> +        bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
>> +                                i * sizeof(uint64_t), sizeof(uint64_t),
>> +                                GHES_ERRORS_FW_CFG_FILE,
>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>> +                                i * MAX_RAW_DATA_LENGTH);

(75) We should create only one WRITE_POINTER command, for the base
address of "etc/hardware_errors". This should be done outside of the
loop.

The base addresses of the individual error status data blocks should be
calculated in ghes_update_guest(), based on the error source /
notification type.

>> +         error_source++;
>> +    }
>> +
>> +     build_header(linker, table_data,
>> +        (void *)header, "HEST", hest->buf->len, 1, NULL, "GHES");

(76) Any particular reason for not passing NULL in "oem_table_id"?

>> +
>> +    free_aml_allocator();
>> +}
>> +
>> +static GhesErrorState ges;
>> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
>> +{
>> +
>> +    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
>> +    int size = MAX_ERROR_SOURCE_COUNT_V6 * block_reqr_size;

(77) These variable should have type "size_t".

(78) What does "reqr" stand for?

(79) I just noticed that the commit message lists error sources /
notification types 1 through 10 (count=10 in total). However, we have 11
error sources actually. Can you update the commit message so that it
mentions sources 0 through 10?

>> +
>> +    /* Create a read-only fw_cfg file for GHES */
>> +    fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
>> +                    size);
>> +    /* Create a read-write fw_cfg file for Address */
>> +    fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
>> +                            &(ges.ghes_addr_le[0]),
>> +                            sizeof(uint64_t) * MAX_ERROR_SOURCE_COUNT_V6,
>> +                            false);
>> +}
>> +

(80) The size calculation for GHES_DATA_ADDR_FW_CFG_FILE is incorrect.
First, it does not match the element count 8 that I highlighted under
remark (47). Second (again), passing back just the base address is
sufficient, so 8 uint8_t elements (for representing a single uint64_t in
LE) are enough.

In other words, the size calculation should be
ARRAY_SIZE(ges.ghes_addr_le) here.

>> +void ghes_update_guest(uint32_t notify, uint64_t physical_address)
>> +{
>> +    uint64_t block_error_addr;
>> +
>> +    if (physical_address) {
>> +        ges.physical_addr = physical_address;
>> +        block_error_addr = ges.ghes_addr_le[notify];
>> +        block_error_addr = le32_to_cpu(block_error_addr);
>> +
>> +        /* A zero value in ghes_addr means that BIOS has not yet written
>> +         * the address
>> +         */
>> +        if (block_error_addr) {
>> +            ghes_generate_cper_record(block_error_addr, physical_address);
>> +        }
>> +    }
>> +}

(81) First, the value of "notify" should be range-checked before using it
as an array subscript. If it is outside of the permissible range,
nothing should be done. Second, in order to locate the affected error
status data block, we should move the offset calculation here, from
ghes_build_acpi().

Thanks
Laszlo

Laszlo Ersek June 3, 2017, 12:01 p.m. UTC | #6

On 05/22/17 16:23, Laszlo Ersek wrote:
> Keeping some context:
> 
> On 05/12/17 23:00, Laszlo Ersek wrote:
>> On 04/30/17 07:35, Dongjiu Geng wrote:

> (68) In the code below, you are not taking an "OVMF header probe
> suppressor" into account.
> 
> But, we have already planned to replace that quirk with a separate,
> dedicated allocation hint or command, so I'm not going to describe what
> an "OVMF header probe suppressor" is; instead, I'll describe the
> replacement for it.
> 
> [...]

So, the NOACPI allocation hint is a no-go at the moment, based on the
discussion in the following threads:

http://mid.mail-archive.com/[e-mail]

http://mid.mail-archive.com/[e-mail]

Therefore the header probe suppression remains necessary.

In this case, it is not hard to do, you just have to reorder the
following two ADD_POINTER additions a bit:

>>> +
>>> +        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
>>> +                                sizeof(uint64_t) * i, sizeof(uint64_t),
>>> +                                GHES_ERRORS_FW_CFG_FILE,
>>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>>> +                                i * MAX_RAW_DATA_LENGTH);

This one should be moved out to a separate loop, after the current loop.

>>> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>>> +                    address_registers_offset
>>> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
>>> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>>> +                    i * sizeof(uint64_t));

This one should be kept in the first (i.e., current) loop.

The idea is, when you first point the HEST/GHES_n entries in
ACPI_BUILD_TABLE_FILE to the "address registers" in
GHES_ERRORS_FW_CFG_FILE, all those address registers will still be
zero-filled. This will fail the ACPI table header probe in
OvmfPkg/AcpiPlatformDxe, which is what we want.

After this is done, the address registers in GHES_ERRORS_FW_CFG_FILE
should be pointed to the error status data blocks in the same fw_cfg
blob, in a separate loop. (Those error status data blocks will again be
zero-filled, so no ACPI table headers will be mistakenly recognized in
them.)

Thanks
Laszlo

gengdongjiu June 24, 2017, 2:20 p.m. UTC | #7

Laszlo,

  Thank you very much  for your carefully review again and again. I am
following your suggestion.


2017-06-03 20:01 GMT+08:00, Laszlo Ersek <[e-mail]>:
> On 05/22/17 16:23, Laszlo Ersek wrote:
>> Keeping some context:
>>
>> On 05/12/17 23:00, Laszlo Ersek wrote:
>>> On 04/30/17 07:35, Dongjiu Geng wrote:
>
>> (68) In the code below, you are not taking an "OVMF header probe
>> suppressor" into account.
>>
>> But, we have already planned to replace that quirk with a separate,
>> dedicated allocation hint or command, so I'm not going to describe what
>> an "OVMF header probe suppressor" is; instead, I'll describe the
>> replacement for it.
>>
>> [...]
>
> So, the NOACPI allocation hint is a no-go at the moment, based on the
> discussion in the following threads:
>
> http://mid.mail-archive.com/[e-mail]
>
> http://mid.mail-archive.com/[e-mail]
>
> Therefore the header probe suppression remains necessary.
>
> In this case, it is not hard to do, you just have to reorder the
> following two ADD_POINTER additions a bit:
>
>>>> +
>>>> +        bios_linker_loader_add_pointer(linker,
>>>> GHES_ERRORS_FW_CFG_FILE,
>>>> +                                sizeof(uint64_t) * i,
>>>> sizeof(uint64_t),
>>>> +                                GHES_ERRORS_FW_CFG_FILE,
>>>> +                                MAX_ERROR_SOURCE_COUNT_V6 *
>>>> sizeof(uint64_t) +
>>>> +                                i * MAX_RAW_DATA_LENGTH);
>
> This one should be moved out to a separate loop, after the current loop.
>
>>>> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>>>> +                    address_registers_offset
>>>> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
>>>> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>>>> +                    i * sizeof(uint64_t));
>
> This one should be kept in the first (i.e., current) loop.
>
> The idea is, when you first point the HEST/GHES_n entries in
> ACPI_BUILD_TABLE_FILE to the "address registers" in
> GHES_ERRORS_FW_CFG_FILE, all those address registers will still be
> zero-filled. This will fail the ACPI table header probe in
> OvmfPkg/AcpiPlatformDxe, which is what we want.
>
> After this is done, the address registers in GHES_ERRORS_FW_CFG_FILE
> should be pointed to the error status data blocks in the same fw_cfg
> blob, in a separate loop. (Those error status data blocks will again be
> zero-filled, so no ACPI table headers will be mistakenly recognized in
> them.)
>
> Thanks
> Laszlo
> _______________________________________________
> kvmarm mailing list
> [e-mail]
> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
>

Dongjiu Geng July 7, 2017, 8:32 a.m. UTC | #8

Hi Laszlo,
   sorry for my late response.

On 2017/6/3 20:01, Laszlo Ersek wrote:
> On 05/22/17 16:23, Laszlo Ersek wrote:
>> Keeping some context:
>>
>> On 05/12/17 23:00, Laszlo Ersek wrote:
>>> On 04/30/17 07:35, Dongjiu Geng wrote:
> 
>> (68) In the code below, you are not taking an "OVMF header probe
>> suppressor" into account.
>>
>> But, we have already planned to replace that quirk with a separate,
>> dedicated allocation hint or command, so I'm not going to describe what
>> an "OVMF header probe suppressor" is; instead, I'll describe the
>> replacement for it.
>>
>> [...]
> 
> So, the NOACPI allocation hint is a no-go at the moment, based on the
> discussion in the following threads:
> 
> http://mid.mail-archive.com/[e-mail]
> 
> http://mid.mail-archive.com/[e-mail]
> 
> Therefore the header probe suppression remains necessary.
> 
> In this case, it is not hard to do, you just have to reorder the
> following two ADD_POINTER additions a bit:
 Ok, it is no problem.

> 
>>>> +
>>>> +        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
>>>> +                                sizeof(uint64_t) * i, sizeof(uint64_t),
>>>> +                                GHES_ERRORS_FW_CFG_FILE,
>>>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>>>> +                                i * MAX_RAW_DATA_LENGTH);
> 
> This one should be moved out to a separate loop, after the current loop.
> 
>>>> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>>>> +                    address_registers_offset
>>>> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
>>>> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>>>> +                    i * sizeof(uint64_t));
> 
> This one should be kept in the first (i.e., current) loop.
> 
> The idea is, when you first point the HEST/GHES_n entries in
> ACPI_BUILD_TABLE_FILE to the "address registers" in
> GHES_ERRORS_FW_CFG_FILE, all those address registers will still be
> zero-filled. This will fail the ACPI table header probe in
> OvmfPkg/AcpiPlatformDxe, which is what we want.
> 
> After this is done, the address registers in GHES_ERRORS_FW_CFG_FILE
> should be pointed to the error status data blocks in the same fw_cfg
> blob, in a separate loop. (Those error status data blocks will again be
> zero-filled, so no ACPI table headers will be mistakenly recognized in
> them.)
I understand your idear. but I have a question:
how about we exchange the two function's place, such as shown below:
then it still meets ours needs, the change is easy.
For every loop:
(1)when patch address in ACPI_BUILD_TABLE_FILE to the "address registers", the address register is zero-filed.
(2)when patch address in GHES_ERRORS_FW_CFG_FILE to the error status data blocks, the error status data block is still zero-filed.

    for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) {
        .....................................
        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
                    address_registers_offset
                    + i * sizeof(AcpiGenericHardwareErrorSource),
                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
                    i * sizeof(uint64_t));


        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
                                sizeof(uint64_t) * i, sizeof(uint64_t),
                                GHES_ERRORS_FW_CFG_FILE,
                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
                                i * MAX_RAW_DATA_LENGTH);
	.........................................

     }

thanks

> 
> Thanks
> Laszlo
> 
> 
> .
>

Laszlo Ersek July 7, 2017, 9:43 a.m. UTC | #9

On 07/07/17 10:32, gengdongjiu wrote:
> Hi Laszlo,
>    sorry for my late response.
> 
> On 2017/6/3 20:01, Laszlo Ersek wrote:
>> On 05/22/17 16:23, Laszlo Ersek wrote:
>>> Keeping some context:
>>>
>>> On 05/12/17 23:00, Laszlo Ersek wrote:
>>>> On 04/30/17 07:35, Dongjiu Geng wrote:
>>
>>> (68) In the code below, you are not taking an "OVMF header probe
>>> suppressor" into account.
>>>
>>> But, we have already planned to replace that quirk with a separate,
>>> dedicated allocation hint or command, so I'm not going to describe what
>>> an "OVMF header probe suppressor" is; instead, I'll describe the
>>> replacement for it.
>>>
>>> [...]
>>
>> So, the NOACPI allocation hint is a no-go at the moment, based on the
>> discussion in the following threads:
>>
>> http://mid.mail-archive.com/[e-mail]
>>
>> http://mid.mail-archive.com/[e-mail]
>>
>> Therefore the header probe suppression remains necessary.
>>
>> In this case, it is not hard to do, you just have to reorder the
>> following two ADD_POINTER additions a bit:
>  Ok, it is no problem.
> 
>>
>>>>> +
>>>>> +        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
>>>>> +                                sizeof(uint64_t) * i, sizeof(uint64_t),
>>>>> +                                GHES_ERRORS_FW_CFG_FILE,
>>>>> +                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>>>>> +                                i * MAX_RAW_DATA_LENGTH);
>>
>> This one should be moved out to a separate loop, after the current loop.
>>
>>>>> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>>>>> +                    address_registers_offset
>>>>> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
>>>>> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>>>>> +                    i * sizeof(uint64_t));
>>
>> This one should be kept in the first (i.e., current) loop.
>>
>> The idea is, when you first point the HEST/GHES_n entries in
>> ACPI_BUILD_TABLE_FILE to the "address registers" in
>> GHES_ERRORS_FW_CFG_FILE, all those address registers will still be
>> zero-filled. This will fail the ACPI table header probe in
>> OvmfPkg/AcpiPlatformDxe, which is what we want.
>>
>> After this is done, the address registers in GHES_ERRORS_FW_CFG_FILE
>> should be pointed to the error status data blocks in the same fw_cfg
>> blob, in a separate loop. (Those error status data blocks will again be
>> zero-filled, so no ACPI table headers will be mistakenly recognized in
>> them.)
> I understand your idear. but I have a question:
> how about we exchange the two function's place, such as shown below:
> then it still meets ours needs, the change is easy.
> For every loop:
> (1)when patch address in ACPI_BUILD_TABLE_FILE to the "address registers", the address register is zero-filed.
> (2)when patch address in GHES_ERRORS_FW_CFG_FILE to the error status data blocks, the error status data block is still zero-filed.
> 
>     for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) {
>         .....................................
>         bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>                     address_registers_offset
>                     + i * sizeof(AcpiGenericHardwareErrorSource),
>                     sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>                     i * sizeof(uint64_t));
> 
> 
>         bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
>                                 sizeof(uint64_t) * i, sizeof(uint64_t),
>                                 GHES_ERRORS_FW_CFG_FILE,
>                                 MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
>                                 i * MAX_RAW_DATA_LENGTH);
> 	.........................................
> 
>      }

Your suggestion seems to do the same, but there is a subtle difference.

When the firmware scans the targets of the ADD_POINTER commands for byte
sequences that "look like" an ACPI table header, in order to suppress
that probe, we should keep 36 bytes (i.e., the size of the ACPI table
header structure) zeroed at the target location.

* In the patch, as posted, this was not the case, because it first
filled in the address register inside the GHES_ERRORS_FW_CFG_FILE blob,
and then pointed a GHES pointer field in the HEST table to the *now*
nonzero address register.

* My suggestion was to first fill in all the GHES pointers (when still
all the pointed-to address registers are zero), and then the address
registers themselves should be patched.

Under this scheme, it is irrelevant whether both loops are incrementing
or decrementing loops.

* Your suggestion would preserve the safe patching order between any
given GHES field and its corresponding (pointed-to) address register. So
that's great.

However, consider the following case:

- Assume that the loop is decrementing, and not incrementing.

- First, the last GHES pointer field, GHES[9].<whatever> is patched. It
is pointed to the last address register in "etc/hardware_errors", which
is still zero-filled. Also, the last address register in
"etc/hardware_errors" is immediately followed by the first Error Status
Data Block, which is also filled with zero. This means that when the
header probe will look at the *target* of GHES[9].<whatever>, it will
definitely fail (which is what we want), because all consecutive 36
bytes that start at the last address register in "etc/hardware_errors"
are zero.

- Second, the last address register, address[9], is patched. It is
pointed to the last Error Status Data Block, which is zero filled, so
the header probe in the firmware fails -- great.

- Third, GHES[8].<whatever> is patched. It is set to &address[8].
However, at this point, the 36 consecutive bytes starting at &address[8]
are *not* all zero, because at relative offset 8, we have the already
patched address[9] register, which is nonzero. I'm not saying that this
would necessarily cause a problem, but we'd better be safe than sorry.


In other words, your suggestion is OK, because the loop we have is
incrementing, not decrementing. But, if you decide to go with your idea,
please add a comment before the "for" instruction, "this loop must
remain an incrementing loop, to safely suppress the ACPI SDT header
probe in the firmware".

Thanks
Laszlo

gengdongjiu July 9, 2017, 3:41 a.m. UTC | #10

Laszlo,
  thanks for your clear and detailed answer. I completely understand
what you mean.

2017-07-07 17:43 GMT+08:00, Laszlo Ersek <[e-mail]>:
> On 07/07/17 10:32, gengdongjiu wrote:
>> Hi Laszlo,
>>    sorry for my late response.
>>
>> On 2017/6/3 20:01, Laszlo Ersek wrote:
>>> On 05/22/17 16:23, Laszlo Ersek wrote:
>>>> Keeping some context:
>>>>
>>>> On 05/12/17 23:00, Laszlo Ersek wrote:
>>>>> On 04/30/17 07:35, Dongjiu Geng wrote:
>>>
>>>> (68) In the code below, you are not taking an "OVMF header probe
>>>> suppressor" into account.
>>>>
>>>> But, we have already planned to replace that quirk with a separate,
>>>> dedicated allocation hint or command, so I'm not going to describe what
>>>> an "OVMF header probe suppressor" is; instead, I'll describe the
>>>> replacement for it.
>>>>
>>>> [...]
>>>
>>> So, the NOACPI allocation hint is a no-go at the moment, based on the
>>> discussion in the following threads:
>>>
>>> http://mid.mail-archive.com/[e-mail]
>>>
>>> http://mid.mail-archive.com/[e-mail]
>>>
>>> Therefore the header probe suppression remains necessary.
>>>
>>> In this case, it is not hard to do, you just have to reorder the
>>> following two ADD_POINTER additions a bit:
>>  Ok, it is no problem.
>>
>>>
>>>>>> +
>>>>>> +        bios_linker_loader_add_pointer(linker,
>>>>>> GHES_ERRORS_FW_CFG_FILE,
>>>>>> +                                sizeof(uint64_t) * i,
>>>>>> sizeof(uint64_t),
>>>>>> +                                GHES_ERRORS_FW_CFG_FILE,
>>>>>> +                                MAX_ERROR_SOURCE_COUNT_V6 *
>>>>>> sizeof(uint64_t) +
>>>>>> +                                i * MAX_RAW_DATA_LENGTH);
>>>
>>> This one should be moved out to a separate loop, after the current loop.
>>>
>>>>>> +        bios_linker_loader_add_pointer(linker,
>>>>>> ACPI_BUILD_TABLE_FILE,
>>>>>> +                    address_registers_offset
>>>>>> +                    + i * sizeof(AcpiGenericHardwareErrorSource),
>>>>>> +                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>>>>>> +                    i * sizeof(uint64_t));
>>>
>>> This one should be kept in the first (i.e., current) loop.
>>>
>>> The idea is, when you first point the HEST/GHES_n entries in
>>> ACPI_BUILD_TABLE_FILE to the "address registers" in
>>> GHES_ERRORS_FW_CFG_FILE, all those address registers will still be
>>> zero-filled. This will fail the ACPI table header probe in
>>> OvmfPkg/AcpiPlatformDxe, which is what we want.
>>>
>>> After this is done, the address registers in GHES_ERRORS_FW_CFG_FILE
>>> should be pointed to the error status data blocks in the same fw_cfg
>>> blob, in a separate loop. (Those error status data blocks will again be
>>> zero-filled, so no ACPI table headers will be mistakenly recognized in
>>> them.)
>> I understand your idear. but I have a question:
>> how about we exchange the two function's place, such as shown below:
>> then it still meets ours needs, the change is easy.
>> For every loop:
>> (1)when patch address in ACPI_BUILD_TABLE_FILE to the "address registers",
>> the address register is zero-filed.
>> (2)when patch address in GHES_ERRORS_FW_CFG_FILE to the error status data
>> blocks, the error status data block is still zero-filed.
>>
>>     for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) {
>>         .....................................
>>         bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>>                     address_registers_offset
>>                     + i * sizeof(AcpiGenericHardwareErrorSource),
>>                     sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
>>                     i * sizeof(uint64_t));
>>
>>
>>         bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
>>                                 sizeof(uint64_t) * i, sizeof(uint64_t),
>>                                 GHES_ERRORS_FW_CFG_FILE,
>>                                 MAX_ERROR_SOURCE_COUNT_V6 *
>> sizeof(uint64_t) +
>>                                 i * MAX_RAW_DATA_LENGTH);
>> 	.........................................
>>
>>      }
>
> Your suggestion seems to do the same, but there is a subtle difference.
>
> When the firmware scans the targets of the ADD_POINTER commands for byte
> sequences that "look like" an ACPI table header, in order to suppress
> that probe, we should keep 36 bytes (i.e., the size of the ACPI table
> header structure) zeroed at the target location.
>
> * In the patch, as posted, this was not the case, because it first
> filled in the address register inside the GHES_ERRORS_FW_CFG_FILE blob,
> and then pointed a GHES pointer field in the HEST table to the *now*
> nonzero address register.
>
> * My suggestion was to first fill in all the GHES pointers (when still
> all the pointed-to address registers are zero), and then the address
> registers themselves should be patched.
>
> Under this scheme, it is irrelevant whether both loops are incrementing
> or decrementing loops.
>
> * Your suggestion would preserve the safe patching order between any
> given GHES field and its corresponding (pointed-to) address register. So
> that's great.
>
> However, consider the following case:
>
> - Assume that the loop is decrementing, and not incrementing.
>
> - First, the last GHES pointer field, GHES[9].<whatever> is patched. It
> is pointed to the last address register in "etc/hardware_errors", which
> is still zero-filled. Also, the last address register in
> "etc/hardware_errors" is immediately followed by the first Error Status
> Data Block, which is also filled with zero. This means that when the
> header probe will look at the *target* of GHES[9].<whatever>, it will
> definitely fail (which is what we want), because all consecutive 36
> bytes that start at the last address register in "etc/hardware_errors"
> are zero.
>
> - Second, the last address register, address[9], is patched. It is
> pointed to the last Error Status Data Block, which is zero filled, so
> the header probe in the firmware fails -- great.
>
> - Third, GHES[8].<whatever> is patched. It is set to &address[8].
> However, at this point, the 36 consecutive bytes starting at &address[8]
> are *not* all zero, because at relative offset 8, we have the already
> patched address[9] register, which is nonzero. I'm not saying that this
> would necessarily cause a problem, but we'd better be safe than sorry.

yes, it it. when the loop is  decrementing, my suggested method will
have problem.


>
>
> In other words, your suggestion is OK, because the loop we have is
> incrementing, not decrementing. But, if you decide to go with your idea,
> please add a comment before the "for" instruction, "this loop must
> remain an incrementing loop, to safely suppress the ACPI SDT header
> probe in the firmware".
Laszlo, I will use your method that separated them into different loop
to avoid the potential problem, thanks.


>
> Thanks
> Laszlo
> _______________________________________________
> kvmarm mailing list
> [e-mail]
> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
>

Patch

================     ==========================================
                     +-----------+
+--------------+     | address   |         +-> +--------------+
|    HEST      +     | registers |         |   | Error Status |
+ +------------+     | +---------+         |   | Data Block 1 |
| | GHES1      | --> | |address1 | --------+   | +------------+
| | GHES2      | --> | |address2 | ------+     | |  CPER      |
| | GHES3      | --> | |address3 | ----+ |     | |  CPER      |
| |  ....      | --> | | ....... |     | |     | |  CPER      |
| | GHES10     | --> | |address10| -+  | |     | |  CPER      |
+-+------------+     +-+---------+  |  | |     +-+------------+
                                    |  | |
                                    |  | +---> +--------------+
                                    |  |       | Error Status |
                                    |  |       | Data Block 2 |
                                    |  |       | +------------+
                                    |  |       | |  CPER      |
                                    |  |       | |  CPER      |
                                    |  |       +-+------------+
                                    |  |
                                    |  +-----> +--------------+
                                    |          | Error Status |
                                    |          | Data Block 3 |
                                    |          | +------------+
                                    |          | |  CPER      |
                                    |          +-+------------+
                                    |            ...........
                                    +--------> +--------------+
                                               | Error Status |
                                               | Data Block 10|
                                               | +------------+
                                               | |  CPER      |
                                               | |  CPER      |
                                               | |  CPER      |
                                               +-+------------+

Signed-off-by: Dongjiu Geng <[e-mail]>
---
 default-configs/arm-softmmu.mak |   1 +
 hw/acpi/Makefile.objs           |   1 +
 hw/acpi/aml-build.c             |   2 +
 hw/acpi/hest_ghes.c             | 203 +++++++++++++++++++++++++++++++++++
 hw/arm/virt-acpi-build.c        |   6 ++
 include/hw/acpi/acpi-defs.h     | 227 ++++++++++++++++++++++++++++++++++++++++
 include/hw/acpi/aml-build.h     |   1 +
 include/hw/acpi/hest_ghes.h     |  43 ++++++++
 8 files changed, 484 insertions(+)
 create mode 100644 hw/acpi/hest_ghes.c
 create mode 100644 include/hw/acpi/hest_ghes.h

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 1e3bd2b..d5f1552 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -121,3 +121,4 @@  CONFIG_ACPI=y
 CONFIG_SMBIOS=y
 CONFIG_ASPEED_SOC=y
 CONFIG_GPIO_KEY=y
+CONFIG_ACPI_APEI_GENERATION=y
diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index 11c35bc..776b46e 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -6,6 +6,7 @@  common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
 common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
 common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
 common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
+common-obj-$(CONFIG_ACPI_APEI_GENERATION) += hest_ghes.o
 common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
 
 common-obj-y += acpi_interface.o
diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
index c6f2032..802b98d 100644
--- a/hw/acpi/aml-build.c
+++ b/hw/acpi/aml-build.c
@@ -1560,6 +1560,7 @@  void acpi_build_tables_init(AcpiBuildTables *tables)
     tables->table_data = g_array_new(false, true /* clear */, 1);
     tables->tcpalog = g_array_new(false, true /* clear */, 1);
     tables->vmgenid = g_array_new(false, true /* clear */, 1);
+    tables->hardware_errors = g_array_new(false, true /* clear */, 1);
     tables->linker = bios_linker_loader_init();
 }
 
@@ -1570,6 +1571,7 @@  void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
     g_array_free(tables->table_data, true);
     g_array_free(tables->tcpalog, mfre);
     g_array_free(tables->vmgenid, mfre);
+    g_array_free(tables->hardware_errors, mfre);
 }
 
 /* Build rsdt table */
diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c
new file mode 100644
index 0000000..91d382e
--- /dev/null
+++ b/hw/acpi/hest_ghes.c
@@ -0,0 +1,203 @@ 
+/*
+ *  APEI GHES table Generation
+ *
+ *  Copyright (C) 2017 huawei.
+ *
+ *  Author: Dongjiu Geng <[e-mail]>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qmp-commands.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/hest_ghes.h"
+#include "hw/nvram/fw_cfg.h"
+#include "sysemu/sysemu.h"
+
+static int ghes_generate_cper_record(uint64_t block_error_address,
+                                    uint64_t error_physical_addr)
+{
+    AcpiGenericErrorStatus block;
+    AcpiGenericErrorData *gdata;
+    struct cper_sec_mem_err *mem_err;
+    uint64_t block_data_length;
+    unsigned char *buffer;
+
+    cpu_physical_memory_read(block_error_address, &block,
+                                sizeof(AcpiGenericErrorStatus));
+
+    block_data_length = sizeof(AcpiGenericErrorStatus) + block.data_length;
+
+    /* If the Generic Error Status Block is NULL, update
+     * the block header
+     */
+    if (!block.block_status) {
+        block.block_status = ACPI_BERT_UNCORRECTABLE;
+        block.error_severity = CPER_SEV_FATAL;
+    }
+
+    block.data_length += sizeof(AcpiGenericErrorData);
+    block.data_length += sizeof(struct cper_sec_mem_err);
+
+    /* Write back the Generic Error Status Block to guest memory */
+    cpu_physical_memory_write(block_error_address, &block,
+                        sizeof(AcpiGenericErrorStatus));
+
+    /* Fill in Generic Error Data Entry */
+    buffer = g_malloc(sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
+    memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
+    gdata = (AcpiGenericErrorData *)buffer;
+
+    memcpy(gdata->section_type, (void *) &CPER_SEC_PLATFORM_MEM,
+                sizeof(uuid_le));
+    gdata->error_data_length = sizeof(struct cper_sec_mem_err);
+
+    mem_err = (struct cper_sec_mem_err *) (gdata + 1);
+
+    /* In order to simplify simulation, hardcode the CPER section to memory
+     * section.
+     */
+    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_TYPE;
+    mem_err->error_type = 3;
+
+    mem_err->validation_bits |= CPER_MEM_VALID_PA;
+    mem_err->physical_addr = error_physical_addr;
+
+    mem_err->validation_bits |= CPER_MEM_VALID_CARD | CPER_MEM_VALID_MODULE |
+            CPER_MEM_VALID_BANK | CPER_MEM_VALID_ROW |
+            CPER_MEM_VALID_COLUMN | CPER_MEM_VALID_BIT_POSITION;
+    mem_err->card = 1;
+    mem_err->module = 2;
+    mem_err->bank = 3;
+    mem_err->row = 1;
+    mem_err->column = 2;
+    mem_err->bit_pos = 5;
+
+    mem_err->validation_bits |= CPER_MEM_VALID_ERROR_STATUS;
+    mem_err->error_status = 4 << 8;
+
+    /* Write back the Generic Error Data Entry to guest memory */
+    cpu_physical_memory_write(block_error_address + block_data_length, buffer,
+                    sizeof(AcpiGenericErrorData) + sizeof(cper_sec_mem_err));
+
+    g_free(buffer);
+    return BFAPEI_OK;
+}
+
+void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
+                                            BIOSLinker *linker)
+{
+    Aml *hest;
+    uint32_t address_registers_offset;
+    AcpiTableHeader *header;
+    AcpiGenericHardwareErrorSource *error_source;
+    int i;
+
+    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
+
+    /* New address register and Error status block table size*/
+    g_array_set_size(hardware_error, MAX_ERROR_SOURCE_COUNT_V6
+                                        * block_reqr_size);
+
+    /* Put this in a HEST table */
+    hest = init_aml_allocator();
+    address_registers_offset = table_data->len
+                                + sizeof(AcpiHardwareErrorSourceTable)
+                                + ERROR_STATUS_ADDRESS_OFFSET
+                                + GAS_ADDRESS_OFFSET;
+    /* Reserve space for HEST table size*/
+    acpi_data_push(hest->buf, sizeof(AcpiHardwareErrorSourceTable)
+                                + MAX_ERROR_SOURCE_COUNT_V6
+                                * sizeof(AcpiGenericHardwareErrorSource));
+
+    g_array_append_vals(table_data, hest->buf->data, hest->buf->len);
+    /* Allocate guest memory for the Data fw_cfg blob */
+    bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE,
+                            hardware_error, 4096,
+                            false /* page boundary, high memory */);
+    header = (AcpiTableHeader *)(table_data->data
+                        + table_data->len - hest->buf->len);
+    *(uint32_t *)(header + 1) = MAX_ERROR_SOURCE_COUNT_V6;
+    error_source = (AcpiGenericHardwareErrorSource *)((char *)header
+                                    + sizeof(AcpiHardwareErrorSourceTable));
+
+    for (i = 0; i < MAX_ERROR_SOURCE_COUNT_V6; i++) {
+        error_source->type = ACPI_HEST_TYPE_GENERIC_ERROR;
+        error_source->source_id = 0;
+        error_source->related_source_id = 0xffff;
+        error_source->flags = 0;
+        error_source->enabled = 1;
+        error_source->number_of_records = 1;
+        error_source->max_sections_per_record = 1;
+        error_source->max_raw_data_length = MAX_RAW_DATA_LENGTH;
+        error_source->error_status_address.space_id =
+                                    ACPI_ADR_SPACE_SYSTEM_MEMORY;
+        error_source->error_status_address.bit_width = 64;
+        error_source->error_status_address.bit_offset = 0;
+        error_source->error_status_address.access_width = 4;
+        error_source->notify.type = i;
+        error_source->notify.length = sizeof(AcpiGenericHardwareErrorSource);
+
+        bios_linker_loader_add_pointer(linker, GHES_ERRORS_FW_CFG_FILE,
+                                sizeof(uint64_t) * i, sizeof(uint64_t),
+                                GHES_ERRORS_FW_CFG_FILE,
+                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
+                                i * MAX_RAW_DATA_LENGTH);
+        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
+                    address_registers_offset
+                    + i * sizeof(AcpiGenericHardwareErrorSource),
+                    sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE,
+                    i * sizeof(uint64_t));
+
+        bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
+                                i * sizeof(uint64_t), sizeof(uint64_t),
+                                GHES_ERRORS_FW_CFG_FILE,
+                                MAX_ERROR_SOURCE_COUNT_V6 * sizeof(uint64_t) +
+                                i * MAX_RAW_DATA_LENGTH);
+         error_source++;
+    }
+
+     build_header(linker, table_data,
+        (void *)header, "HEST", hest->buf->len, 1, NULL, "GHES");
+
+    free_aml_allocator();
+}
+
+static GhesErrorState ges;
+void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
+{
+
+    int block_reqr_size = sizeof(uint64_t) + MAX_RAW_DATA_LENGTH;
+    int size = MAX_ERROR_SOURCE_COUNT_V6 * block_reqr_size;
+
+    /* Create a read-only fw_cfg file for GHES */
+    fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
+                    size);
+    /* Create a read-write fw_cfg file for Address */
+    fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
+                            &(ges.ghes_addr_le[0]),
+                            sizeof(uint64_t) * MAX_ERROR_SOURCE_COUNT_V6,
+                            false);
+}
+
+void ghes_update_guest(uint32_t notify, uint64_t physical_address)
+{
+    uint64_t block_error_addr;
+
+    if (physical_address) {
+        ges.physical_addr = physical_address;
+        block_error_addr = ges.ghes_addr_le[notify];
+        block_error_addr = le32_to_cpu(block_error_addr);
+
+        /* A zero value in ghes_addr means that BIOS has not yet written
+         * the address
+         */
+        if (block_error_addr) {
+            ghes_generate_cper_record(block_error_addr, physical_address);
+        }
+    }
+}
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 0835e59..e7ab5dc 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -45,6 +45,8 @@ 
 #include "hw/arm/virt.h"
 #include "sysemu/numa.h"
 #include "kvm_arm.h"
+#include "hw/acpi/vmgenid.h"
+#include "hw/acpi/hest_ghes.h"
 
 #define ARM_SPI_BASE 32
 #define ACPI_POWER_BUTTON_DEVICE "PWRB"
@@ -778,6 +780,9 @@  void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
     acpi_add_table(table_offsets, tables_blob);
     build_spcr(tables_blob, tables->linker, vms);
 
+    acpi_add_table(table_offsets, tables_blob);
+    ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker);
+
     if (nb_numa_nodes > 0) {
         acpi_add_table(table_offsets, tables_blob);
         build_srat(tables_blob, tables->linker, vms);
@@ -892,6 +897,7 @@  void virt_acpi_setup(VirtMachineState *vms)
 
     build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
                                               ACPI_BUILD_RSDP_FILE, 0);
+    ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
 
     qemu_register_reset(virt_acpi_build_reset, build_state);
     virt_acpi_build_reset(build_state);
diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index 4cc3630..27adede 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -295,6 +295,58 @@  typedef struct AcpiMultipleApicTable AcpiMultipleApicTable;
 #define ACPI_APIC_GENERIC_TRANSLATOR    15
 #define ACPI_APIC_RESERVED              16   /* 16 and greater are reserved */
 
+#define CPER_MEM_VALID_ERROR_STATUS     0x0001
+#define CPER_MEM_VALID_PA               0x0002
+#define CPER_MEM_VALID_PA_MASK          0x0004
+#define CPER_MEM_VALID_NODE             0x0008
+#define CPER_MEM_VALID_CARD             0x0010
+#define CPER_MEM_VALID_MODULE           0x0020
+#define CPER_MEM_VALID_BANK             0x0040
+#define CPER_MEM_VALID_DEVICE           0x0080
+#define CPER_MEM_VALID_ROW              0x0100
+#define CPER_MEM_VALID_COLUMN           0x0200
+#define CPER_MEM_VALID_BIT_POSITION     0x0400
+#define CPER_MEM_VALID_REQUESTOR_ID     0x0800
+#define CPER_MEM_VALID_RESPONDER_ID     0x1000
+#define CPER_MEM_VALID_TARGET_ID        0x2000
+#define CPER_MEM_VALID_ERROR_TYPE       0x4000
+#define CPER_MEM_VALID_RANK_NUMBER      0x8000
+#define CPER_MEM_VALID_CARD_HANDLE      0x10000
+#define CPER_MEM_VALID_MODULE_HANDLE    0x20000
+
+typedef struct {
+    uint8_t b[16];
+} uuid_le;
+
+#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)        \
+((uuid_le)                              \
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+    (b) & 0xff, ((b) >> 8) & 0xff,                   \
+    (c) & 0xff, ((c) >> 8) & 0xff,                   \
+    (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) } })
+
+/* Platform Memory */
+#define CPER_SEC_PLATFORM_MEM                   \
+    UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
+        0xED, 0x7C, 0x83, 0xB1)
+
+/* Values for Notify Type field above */
+
+enum acpi_hest_notify_types {
+    ACPI_HEST_NOTIFY_POLLED = 0,
+    ACPI_HEST_NOTIFY_EXTERNAL = 1,
+    ACPI_HEST_NOTIFY_LOCAL = 2,
+    ACPI_HEST_NOTIFY_SCI = 3,
+    ACPI_HEST_NOTIFY_NMI = 4,
+    ACPI_HEST_NOTIFY_CMCI = 5,  /* ACPI 5.0 */
+    ACPI_HEST_NOTIFY_MCE = 6,   /* ACPI 5.0 */
+    ACPI_HEST_NOTIFY_GPIO = 7,  /* ACPI 6.0 */
+    ACPI_HEST_NOTIFY_SEA = 8,   /* ACPI 6.1 */
+    ACPI_HEST_NOTIFY_SEI = 9,   /* ACPI 6.1 */
+    ACPI_HEST_NOTIFY_GSIV = 10, /* ACPI 6.1 */
+    ACPI_HEST_NOTIFY_RESERVED = 11  /* 11 and greater are reserved */
+};
+
 /*
  * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
  */
@@ -475,6 +527,181 @@  struct AcpiSystemResourceAffinityTable
 } QEMU_PACKED;
 typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
 
+#define ACPI_ADR_SPACE_SYSTEM_MEMORY    (uint8_t) 0
+#define ACPI_ADR_SPACE_SYSTEM_IO        (uint8_t) 1
+#define ACPI_ADR_SPACE_PCI_CONFIG       (uint8_t) 2
+#define ACPI_ADR_SPACE_EC               (uint8_t) 3
+#define ACPI_ADR_SPACE_SMBUS            (uint8_t) 4
+#define ACPI_ADR_SPACE_CMOS             (uint8_t) 5
+#define ACPI_ADR_SPACE_PCI_BAR_TARGET   (uint8_t) 6
+#define ACPI_ADR_SPACE_IPMI             (uint8_t) 7
+#define ACPI_ADR_SPACE_GPIO             (uint8_t) 8
+#define ACPI_ADR_SPACE_GSBUS            (uint8_t) 9
+#define ACPI_ADR_SPACE_PLATFORM_COMM    (uint8_t) 10
+
+/* GAS - Generic Address Structure */
+struct acpi_generic_address {
+    uint8_t space_id;       /* Address space where
+                             *struct or register exists
+                             */
+    uint8_t bit_width;      /* Size in bits of given register */
+    uint8_t bit_offset;     /* Bit offset within the register */
+    uint8_t access_width;   /* Minimum Access size (ACPI 3.0) */
+    uint64_t address;       /* 64-bit address of struct or register */
+} __attribute__ ((packed));
+
+/* Hardware Error Notification */
+struct acpi_hest_notify {
+    uint8_t type;
+    uint8_t length;
+    uint16_t config_write_enable;
+    uint32_t poll_interval;
+    uint32_t vector;
+    uint32_t polling_threshold_value;
+    uint32_t polling_threshold_window;
+    uint32_t error_threshold_value;
+    uint32_t error_threshold_window;
+};
+
+enum acpi_hest_types {
+    ACPI_HEST_TYPE_IA32_CHECK = 0,
+    ACPI_HEST_TYPE_IA32_CORRECTED_CHECK = 1,
+    ACPI_HEST_TYPE_IA32_NMI = 2,
+    ACPI_HEST_TYPE_NOT_USED3 = 3,
+    ACPI_HEST_TYPE_NOT_USED4 = 4,
+    ACPI_HEST_TYPE_NOT_USED5 = 5,
+    ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
+    ACPI_HEST_TYPE_AER_ENDPOINT = 7,
+    ACPI_HEST_TYPE_AER_BRIDGE = 8,
+    ACPI_HEST_TYPE_GENERIC_ERROR = 9,
+    ACPI_HEST_TYPE_GENERIC_ERROR_V2 = 10,
+    ACPI_HEST_TYPE_RESERVED = 11    /* 11 and greater are reserved */
+};
+
+/* Values for block_status flags above */
+#define ACPI_BERT_UNCORRECTABLE             (1)
+#define ACPI_BERT_CORRECTABLE               (1 << 1)
+#define ACPI_BERT_MULTIPLE_UNCORRECTABLE    (1 << 2)
+#define ACPI_BERT_MULTIPLE_CORRECTABLE      (1 << 3)
+/* 8 bits, error count */
+#define ACPI_BERT_ERROR_ENTRY_COUNT         (0xFF << 4)
+
+/* Generic Hardware Error Source Structure */
+struct AcpiGenericHardwareErrorSource {
+    uint16_t type;
+    uint16_t source_id;
+    uint16_t related_source_id;
+    uint8_t flags;
+    uint8_t enabled;
+    uint32_t number_of_records;
+    uint32_t max_sections_per_record;
+    uint32_t max_raw_data_length;
+    struct acpi_generic_address error_status_address;
+    struct acpi_hest_notify notify;
+    uint32_t error_status_block_length;
+} QEMU_PACKED;
+typedef struct AcpiGenericHardwareErrorSource AcpiGenericHardwareErrorSource;
+
+/* Generic Hardware Error Source , version 2 */
+struct AcpiGenericHardwareErrorSourceV2 {
+    uint16_t type;
+    uint16_t source_id;
+    uint16_t related_source_id;
+    uint8_t flags;
+    uint8_t enabled;
+    uint32_t number_of_records;
+    uint32_t max_sections_per_record;
+    uint32_t max_raw_data_length;
+    struct acpi_generic_address error_status_address;
+    struct acpi_hest_notify notify;
+    uint32_t error_status_block_length;
+    struct acpi_generic_address read_ack_register;
+    uint64_t read_ack_preserve;
+    uint64_t read_ack_write;
+} QEMU_PACKED;
+typedef struct AcpiGenericHardwareErrorSourceV2
+            AcpiGenericHardwareErrorSourceV2;
+
+/* Generic Error Status block */
+
+struct AcpiGenericErrorStatus {
+    uint32_t block_status;
+    uint32_t raw_data_offset;
+    uint32_t raw_data_length;
+    uint32_t data_length;
+    uint32_t error_severity;
+};
+typedef struct AcpiGenericErrorStatus AcpiGenericErrorStatus;
+
+/* Generic Error Data entry */
+
+struct AcpiGenericErrorData {
+    uint8_t section_type[16];
+    uint32_t error_severity;
+    uint16_t revision;
+    uint8_t validation_bits;
+    uint8_t flags;
+    uint32_t error_data_length;
+    uint8_t fru_id[16];
+    uint8_t fru_text[20];
+};
+typedef struct AcpiGenericErrorData AcpiGenericErrorData;
+
+/* Extension for revision 0x0300  */
+struct AcpiGenericErrorDataV300 {
+    uint8_t section_type[16];
+    uint32_t error_severity;
+    uint16_t revision;
+    uint8_t validation_bits;
+    uint8_t flags;
+    uint32_t error_data_length;
+    uint8_t fru_id[16];
+    uint8_t fru_text[20];
+    uint64_t time_stamp;
+};
+typedef struct AcpiGenericErrorDataV300 AcpiGenericErrorDataV300;
+
+enum {
+    CPER_SEV_RECOVERABLE,
+    CPER_SEV_FATAL,
+    CPER_SEV_CORRECTED,
+    CPER_SEV_INFORMATIONAL,
+};
+
+/* Memory Error Section */
+struct cper_sec_mem_err {
+    uint64_t    validation_bits;
+    uint64_t    error_status;
+    uint64_t    physical_addr;
+    uint64_t    physical_addr_mask;
+    uint16_t    node;
+    uint16_t    card;
+    uint16_t    module;
+    uint16_t    bank;
+    uint16_t    device;
+    uint16_t    row;
+    uint16_t    column;
+    uint16_t    bit_pos;
+    uint64_t    requestor_id;
+    uint64_t    responder_id;
+    uint64_t    target_id;
+    uint8_t     error_type;
+    uint8_t     reserved;
+    uint16_t    rank;
+    uint16_t    mem_array_handle;   /* card handle in UEFI 2.4 */
+    uint16_t    mem_dev_handle;     /* module handle in UEFI 2.4 */
+};
+ typedef struct cper_sec_mem_err cper_sec_mem_err;
+
+/*
+ * HEST Description Table
+ */
+struct AcpiHardwareErrorSourceTable {
+    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
+    uint32_t           error_source_count;
+} QEMU_PACKED;
+typedef struct AcpiHardwareErrorSourceTable AcpiHardwareErrorSourceTable;
+
 #define ACPI_SRAT_PROCESSOR_APIC     0
 #define ACPI_SRAT_MEMORY             1
 #define ACPI_SRAT_PROCESSOR_x2APIC   2
diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
index 00c21f1..c1d15b3 100644
--- a/include/hw/acpi/aml-build.h
+++ b/include/hw/acpi/aml-build.h
@@ -211,6 +211,7 @@  struct AcpiBuildTables {
     GArray *rsdp;
     GArray *tcpalog;
     GArray *vmgenid;
+    GArray *hardware_errors;
     BIOSLinker *linker;
 } AcpiBuildTables;
 
diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h
new file mode 100644
index 0000000..0cadc2b
--- /dev/null
+++ b/include/hw/acpi/hest_ghes.h
@@ -0,0 +1,43 @@ 
+#ifndef ACPI_GHES_H
+#define ACPI_GHES_H
+
+#include "hw/acpi/bios-linker-loader.h"
+
+#define GHES_ERRORS_FW_CFG_FILE      "etc/hardware_errors"
+#define GHES_DATA_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
+
+#define GAS_ADDRESS_OFFSET              4
+#define ERROR_STATUS_ADDRESS_OFFSET     20
+#define NOTIFICATION_STRUCTURE          32
+
+#define BFAPEI_OK   0
+#define BFAPEI_FAIL 1
+
+/* The max number of error source, the error sources
+ * are classified by notification type, below is the definition
+ * 0 - Polled
+ * 1 - External Interrupt
+ * 2 - Local Interrupt
+ * 3 - SCI
+ * 4 - NMI
+ * 5 - CMCI
+ * 6 - MCE
+ * 7 - GPIO-Signal
+ * 8 - ARMv8 SEA
+ * 9 - ARMv8 SEI
+ * 10 - External Interrupt - GSIV
+ */
+#define MAX_ERROR_SOURCE_COUNT_V6           11
+/* The max size in Bytes for one error block */
+#define MAX_RAW_DATA_LENGTH                 0x1000
+
+typedef struct GhesErrorState {
+    uint64_t physical_addr;
+    uint64_t ghes_addr_le[8];
+} GhesErrorState;
+
+void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
+                            BIOSLinker *linker);
+void ghes_add_fw_cfg(FWCfgState *s, GArray *guid);
+void ghes_update_guest(uint32_t notify, uint64_t physical_address);
+#endif