| Message ID | 20170519165144.11508-1-enric.balletbo@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, May 19, 2017 at 06:51:43PM +0200, Enric Balletbo i Serra wrote: > The second version of the hardware moved the card detect pin from gpio0_6 > to gpio1_9, as we won't support the first hardware version fix the pinmux > configuration of this pin. > > Fixes: 8584d4fc ("ARM: dts: am335x-sl50: Add Toby-Churchill SL50 board support.") > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > arch/arm/boot/dts/am335x-sl50.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) <formletter> This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read: https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html for how to do this properly. </formletter>
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index c5d2589..da4f8e3 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -220,7 +220,7 @@ mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ >; }; @@ -384,7 +384,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; vmmc-supply = <&vmmcsd_fixed>; };
The second version of the hardware moved the card detect pin from gpio0_6 to gpio1_9, as we won't support the first hardware version fix the pinmux configuration of this pin. Fixes: 8584d4fc ("ARM: dts: am335x-sl50: Add Toby-Churchill SL50 board support.") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- arch/arm/boot/dts/am335x-sl50.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)