@@ -999,6 +999,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
+ armada-385-linksys-rango.dtb \
armada-385-linksys-shelby.dtb \
armada-385-synology-ds116.dtb \
armada-385-turris-omnia.dtb \
new file mode 100644
@@ -0,0 +1,203 @@
+/*
+ * Device Tree file for the Linksys WRT3200ACM (Rango)
+ *
+ * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT3200ACM";
+ compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+};
+
+&expander0 {
+ wan_amber@0 {
+ label = "rango:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "rango:white:wan";
+ reg = <0x1>;
+ };
+
+ usb2@5 {
+ label = "rango:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "rango:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "rango:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "rango:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "rango:amber:wps";
+ reg = <0x9>;
+ };
+};
+
+&gpio_leds {
+ power {
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ label = "rango:white:power";
+ };
+
+ sata {
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ label = "rango:white:sata";
+ };
+
+ wlan_2g {
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ label = "rango:white:wlan_2g";
+ };
+
+ wlan_5g {
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ label = "rango:white:wlan_5g";
+ };
+};
+
+&gpio_leds_pins {
+ marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+ /* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MiB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "u_env";
+ reg = <0x200000 0x20000>; /* 128KiB */
+ };
+
+ partition@220000 {
+ label = "s_env";
+ reg = <0x220000 0x40000>; /* 256KiB */
+ };
+
+ partition@7e0000 {
+ label = "devinfo";
+ reg = <0x7e0000 0x40000>; /* 256KiB */
+ read-only;
+ };
+
+ partition@820000 {
+ label = "sysdiag";
+ reg = <0x820000 0x1e0000>; /* 1920KiB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x5000000>; /* 80MiB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x4a00000>; /* 74MiB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@5a00000 {
+ label = "kernel2";
+ reg = <0x5a00000 0x5000000>; /* 80MiB */
+ };
+
+ partition@6000000 {
+ label = "rootfs2";
+ reg = <0x6000000 0x4a00000>; /* 74MiB */
+ };
+
+ /*
+ * 86MiB, last MiB is for the BBT, not writable
+ */
+ partition@aa00000 {
+ label = "syscfg";
+ reg = <0xaa00000 0x5600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x260000 0x5c0000>; /* 5.75MiB */
+ };
+};
+
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ no-1-8-v;
+ broken-cd;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&usb3_1_vbus {
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+ marvell,pins = "mpp44";
+};