diff mbox

[15/26] target/s390x: fix COMPARE LOGICAL LONG EXTENDED

Message ID 20170525210508.4910-16-aurelien@aurel32.net (mailing list archive)
State New, archived
Headers show

Commit Message

Aurelien Jarno May 25, 2017, 9:04 p.m. UTC
There are multiple issues with the COMPARE LOGICAL LONG EXTENDED
instruction:
- The test between the two operands is inverted, leading to an inversion
  of the cc values 1 and 2.
- The address and length of an operand continue to be decreased after
  reaching the end of this operand. These values are then wrong write
  back to the registers.
- We should limit the amount of bytes to process, so that interrupts can
  be served correctly.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 target/s390x/mem_helper.c | 36 ++++++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)

Comments

Richard Henderson May 26, 2017, 3:23 p.m. UTC | #1
On 05/25/2017 02:04 PM, Aurelien Jarno wrote:
> There are multiple issues with the COMPARE LOGICAL LONG EXTENDED
> instruction:
> - The test between the two operands is inverted, leading to an inversion
>    of the cc values 1 and 2.
> - The address and length of an operand continue to be decreased after
>    reaching the end of this operand. These values are then wrong write
>    back to the registers.
> - We should limit the amount of bytes to process, so that interrupts can
>    be served correctly.
> 
> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
> ---
>   target/s390x/mem_helper.c | 36 ++++++++++++++++++++++++++++--------
>   1 file changed, 28 insertions(+), 8 deletions(-)
> 
> diff --git a/target/s390x/mem_helper.c b/target/s390x/mem_helper.c
> index 1dc71fe5f0..bd3bce3623 100644
> --- a/target/s390x/mem_helper.c
> +++ b/target/s390x/mem_helper.c
> @@ -716,28 +716,48 @@ uint32_t HELPER(clcle)(CPUS390XState *env, uint32_t r1, uint64_t a2,
>       uint64_t srclen = get_length(env, r3 + 1);
>       uint64_t src = get_address(env, r3);
>       uint8_t pad = a2 & 0xff;
> +    uint64_t len = MAX(srclen, destlen);
>       uint32_t cc = 0;
>   
>       if (!(destlen || srclen)) {

Might as well replace this with len == 0 now.

>           if (v1 != v2) {
> -            cc = (v1 < v2) ? 1 : 2;
> +            cc = (v1 > v2) ? 1 : 2;

This would have been less confusing, perhaps, if we'd not used "src" and "dest" 
-- and doubly so since they are two sources -- but rather "src1" and "src3", 
which corresponds better to the PoO text.

That said,

Reviewed-by: Richard Henderson <rth@twiddle.net>


r~
diff mbox

Patch

diff --git a/target/s390x/mem_helper.c b/target/s390x/mem_helper.c
index 1dc71fe5f0..bd3bce3623 100644
--- a/target/s390x/mem_helper.c
+++ b/target/s390x/mem_helper.c
@@ -716,28 +716,48 @@  uint32_t HELPER(clcle)(CPUS390XState *env, uint32_t r1, uint64_t a2,
     uint64_t srclen = get_length(env, r3 + 1);
     uint64_t src = get_address(env, r3);
     uint8_t pad = a2 & 0xff;
+    uint64_t len = MAX(srclen, destlen);
     uint32_t cc = 0;
 
     if (!(destlen || srclen)) {
         return cc;
     }
 
-    if (srclen > destlen) {
-        srclen = destlen;
+    /* Lest we fail to service interrupts in a timely manner, limit the
+       amount of work we're willing to do.  For now, let's cap at 8k.  */
+    if (len > 0x2000) {
+        len = 0x2000;
+        cc = 3;
     }
 
-    for (; destlen || srclen; src++, dest++, destlen--, srclen--) {
-        uint8_t v1 = srclen ? cpu_ldub_data_ra(env, src, ra) : pad;
-        uint8_t v2 = destlen ? cpu_ldub_data_ra(env, dest, ra) : pad;
+    for (; len; len--) {
+        uint8_t v1 = pad;
+        uint8_t v2 = pad;
+
+        if (srclen) {
+            v1 = cpu_ldub_data_ra(env, src, ra);
+        }
+        if (destlen) {
+            v2 = cpu_ldub_data_ra(env, dest, ra);
+        }
+
         if (v1 != v2) {
-            cc = (v1 < v2) ? 1 : 2;
+            cc = (v1 > v2) ? 1 : 2;
             break;
         }
+
+        if (srclen) {
+            src++;
+            srclen--;
+        }
+        if (destlen) {
+            dest++;
+            destlen--;
+        }
     }
 
     set_length(env, r1 + 1, destlen);
-    /* can't use srclen here, we trunc'ed it */
-    set_length(env, r3 + 1, env->regs[r3 + 1] - src - env->regs[r3]);
+    set_length(env, r3 + 1, srclen);
     set_address(env, r1, dest);
     set_address(env, r3, src);