| Message ID | 1495892865-9506-3-git-send-email-sricharan@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Saturday, May 27, 2017 07:17:42 PM Sricharan R wrote: > While deferring the probe of IOMMU masters, xlate and > add_device callbacks called from iort_iommu_configure > can pass back error values like -ENODEV, which means > the IOMMU cannot be connected with that master for real > reasons. Before the IOMMU probe deferral, all such errors > were ignored. Now all those errors are propagated back, > killing the master's probe for such errors. Instead ignore > all the errors except EPROBE_DEFER, which is the only one > of concern and let the master work without IOMMU, thus > restoring the old behavior. Also make explicit that > acpi_dma_configure handles only -EPROBE_DEFER from > iort_iommu_configure. > > Fixes: 5a1bb638d567 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error") > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > --- > drivers/acpi/arm64/iort.c | 6 ++++++ > drivers/acpi/scan.c | 4 ++-- > 2 files changed, 8 insertions(+), 2 deletions(-) > > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > index c5fecf9..16e101f 100644 > --- a/drivers/acpi/arm64/iort.c > +++ b/drivers/acpi/arm64/iort.c > @@ -782,6 +782,12 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) > if (err) > ops = ERR_PTR(err); > > + /* Ignore all other errors apart from EPROBE_DEFER */ > + if (IS_ERR(ops) && (PTR_ERR(ops) != -EPROBE_DEFER)) { > + dev_dbg(dev, "Adding to IOMMU failed: %ld\n", PTR_ERR(ops)); > + ops = NULL; > + } > + > return ops; > } > > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c > index e39ec7b..3a10d757 100644 > --- a/drivers/acpi/scan.c > +++ b/drivers/acpi/scan.c > @@ -1371,8 +1371,8 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > iort_set_dma_mask(dev); > > iommu = iort_iommu_configure(dev); > - if (IS_ERR(iommu)) > - return PTR_ERR(iommu); > + if (IS_ERR(iommu) && PTR_ERR(iommu) == -EPROBE_DEFER) > + return -EPROBE_DEFER; > > size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1); > /* > ACK for the scan.c change and I'm assuming this to go in via ARM64. Thanks, Rafael
Hi Rafael, On 5/28/2017 12:48 AM, Rafael J. Wysocki wrote: > On Saturday, May 27, 2017 07:17:42 PM Sricharan R wrote: >> While deferring the probe of IOMMU masters, xlate and >> add_device callbacks called from iort_iommu_configure >> can pass back error values like -ENODEV, which means >> the IOMMU cannot be connected with that master for real >> reasons. Before the IOMMU probe deferral, all such errors >> were ignored. Now all those errors are propagated back, >> killing the master's probe for such errors. Instead ignore >> all the errors except EPROBE_DEFER, which is the only one >> of concern and let the master work without IOMMU, thus >> restoring the old behavior. Also make explicit that >> acpi_dma_configure handles only -EPROBE_DEFER from >> iort_iommu_configure. >> >> Fixes: 5a1bb638d567 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error") >> Signed-off-by: Sricharan R <sricharan@codeaurora.org> >> --- >> drivers/acpi/arm64/iort.c | 6 ++++++ >> drivers/acpi/scan.c | 4 ++-- >> 2 files changed, 8 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c >> index c5fecf9..16e101f 100644 >> --- a/drivers/acpi/arm64/iort.c >> +++ b/drivers/acpi/arm64/iort.c >> @@ -782,6 +782,12 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) >> if (err) >> ops = ERR_PTR(err); >> >> + /* Ignore all other errors apart from EPROBE_DEFER */ >> + if (IS_ERR(ops) && (PTR_ERR(ops) != -EPROBE_DEFER)) { >> + dev_dbg(dev, "Adding to IOMMU failed: %ld\n", PTR_ERR(ops)); >> + ops = NULL; >> + } >> + >> return ops; >> } >> >> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c >> index e39ec7b..3a10d757 100644 >> --- a/drivers/acpi/scan.c >> +++ b/drivers/acpi/scan.c >> @@ -1371,8 +1371,8 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) >> iort_set_dma_mask(dev); >> >> iommu = iort_iommu_configure(dev); >> - if (IS_ERR(iommu)) >> - return PTR_ERR(iommu); >> + if (IS_ERR(iommu) && PTR_ERR(iommu) == -EPROBE_DEFER) >> + return -EPROBE_DEFER; >> >> size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1); >> /* >> > > ACK for the scan.c change and I'm assuming this to go in via ARM64. > Thanks for the ACK, should go through the IOMMU tree, since this fixes the IOMMU probe deferral that got merged through it. Regards, Sricharan > Thanks, > Rafael > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
On Mon, May 29, 2017 at 10:36:42AM +0530, Sricharan R wrote: > Hi Rafael, > > On 5/28/2017 12:48 AM, Rafael J. Wysocki wrote: > > On Saturday, May 27, 2017 07:17:42 PM Sricharan R wrote: > >> While deferring the probe of IOMMU masters, xlate and > >> add_device callbacks called from iort_iommu_configure > >> can pass back error values like -ENODEV, which means > >> the IOMMU cannot be connected with that master for real > >> reasons. Before the IOMMU probe deferral, all such errors > >> were ignored. Now all those errors are propagated back, > >> killing the master's probe for such errors. Instead ignore > >> all the errors except EPROBE_DEFER, which is the only one > >> of concern and let the master work without IOMMU, thus > >> restoring the old behavior. Also make explicit that > >> acpi_dma_configure handles only -EPROBE_DEFER from > >> iort_iommu_configure. > >> > >> Fixes: 5a1bb638d567 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error") > >> Signed-off-by: Sricharan R <sricharan@codeaurora.org> > >> --- > >> drivers/acpi/arm64/iort.c | 6 ++++++ > >> drivers/acpi/scan.c | 4 ++-- > >> 2 files changed, 8 insertions(+), 2 deletions(-) > >> > >> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > >> index c5fecf9..16e101f 100644 > >> --- a/drivers/acpi/arm64/iort.c > >> +++ b/drivers/acpi/arm64/iort.c > >> @@ -782,6 +782,12 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) > >> if (err) > >> ops = ERR_PTR(err); > >> > >> + /* Ignore all other errors apart from EPROBE_DEFER */ > >> + if (IS_ERR(ops) && (PTR_ERR(ops) != -EPROBE_DEFER)) { > >> + dev_dbg(dev, "Adding to IOMMU failed: %ld\n", PTR_ERR(ops)); > >> + ops = NULL; > >> + } > >> + > >> return ops; > >> } > >> > >> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c > >> index e39ec7b..3a10d757 100644 > >> --- a/drivers/acpi/scan.c > >> +++ b/drivers/acpi/scan.c > >> @@ -1371,8 +1371,8 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > >> iort_set_dma_mask(dev); > >> > >> iommu = iort_iommu_configure(dev); > >> - if (IS_ERR(iommu)) > >> - return PTR_ERR(iommu); > >> + if (IS_ERR(iommu) && PTR_ERR(iommu) == -EPROBE_DEFER) > >> + return -EPROBE_DEFER; > >> > >> size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1); > >> /* > >> > > > > ACK for the scan.c change and I'm assuming this to go in via ARM64. > > > > Thanks for the ACK, should go through the IOMMU tree, since this fixes the IOMMU probe deferral > that got merged through it. Yes and it would be good to get them merged for -rc4 given that there are bug fixes there, I agree the IOMMU tree is the way they should go upstream. Lorenzo
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index c5fecf9..16e101f 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -782,6 +782,12 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) if (err) ops = ERR_PTR(err); + /* Ignore all other errors apart from EPROBE_DEFER */ + if (IS_ERR(ops) && (PTR_ERR(ops) != -EPROBE_DEFER)) { + dev_dbg(dev, "Adding to IOMMU failed: %ld\n", PTR_ERR(ops)); + ops = NULL; + } + return ops; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index e39ec7b..3a10d757 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1371,8 +1371,8 @@ int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) iort_set_dma_mask(dev); iommu = iort_iommu_configure(dev); - if (IS_ERR(iommu)) - return PTR_ERR(iommu); + if (IS_ERR(iommu) && PTR_ERR(iommu) == -EPROBE_DEFER) + return -EPROBE_DEFER; size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1); /*
While deferring the probe of IOMMU masters, xlate and add_device callbacks called from iort_iommu_configure can pass back error values like -ENODEV, which means the IOMMU cannot be connected with that master for real reasons. Before the IOMMU probe deferral, all such errors were ignored. Now all those errors are propagated back, killing the master's probe for such errors. Instead ignore all the errors except EPROBE_DEFER, which is the only one of concern and let the master work without IOMMU, thus restoring the old behavior. Also make explicit that acpi_dma_configure handles only -EPROBE_DEFER from iort_iommu_configure. Fixes: 5a1bb638d567 ("drivers: acpi: Handle IOMMU lookup failure with deferred probing or error") Signed-off-by: Sricharan R <sricharan@codeaurora.org> --- drivers/acpi/arm64/iort.c | 6 ++++++ drivers/acpi/scan.c | 4 ++-- 2 files changed, 8 insertions(+), 2 deletions(-)