| Message ID | 20170604183341.21417-4-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Sun, 2017-06-04 at 20:33 +0200, Martin Blumenstingl wrote: > This removes the dummy clk81 gate and replaces it with the actual clock > controller's CLKID_CLK81. This will also allow us to pass the real clock > IDs to all devices where the clock is controlled by clkc in the future. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> This is going in the right direction and at least align meson8 and meson8b. Acked-by: Jerome Brunet <jbrunet@baylibre.com> Later on, I'm wondering if some of these clock assignments should be moved to meson.dtsi ? meson8.dtsi and meson8b.dtsi look very similar > --- > arch/arm/boot/dts/meson8.dtsi | 32 ++++++++++++++++---------------- > 1 file changed, 16 insertions(+), 16 deletions(-) > > diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi > index 6993077331c7..9b0b3ddbb17e 100644 > --- a/arch/arm/boot/dts/meson8.dtsi > +++ b/arch/arm/boot/dts/meson8.dtsi > @@ -43,6 +43,7 @@ > * OTHER DEALINGS IN THE SOFTWARE. > */ > > +#include <dt-bindings/clock/meson8b-clkc.h> > #include <dt-bindings/gpio/meson8-gpio.h> > /include/ "meson.dtsi" > > @@ -82,13 +83,6 @@ > reg = <0x203>; > }; > }; > - > - clk81: clk@0 { > - #clock-cells = <0>; > - compatible = "fixed-clock"; > - clock-frequency = <141666666>; > - }; > - > }; /* end of / */ > > &aobus { > @@ -126,6 +120,12 @@ > }; > > &cbus { > + clkc: clock-controller@4000 { > + #clock-cells = <1>; > + compatible = "amlogic,meson8-clkc"; > + reg = <0x8000 0x4>, <0x4000 0x460>; > + }; > + > pinctrl_cbus: pinctrl@9880 { > compatible = "amlogic,meson8-cbus-pinctrl"; > reg = <0x9880 0x10>; > @@ -172,20 +172,20 @@ > }; > > ðmac { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > clock-names = "stmmaceth"; > }; > > &i2c_AO { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &i2c_A { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &i2c_B { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &L2 { > @@ -195,21 +195,21 @@ > }; > > &spifc { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &uart_AO { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &uart_A { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &uart_B { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; > > &uart_C { > - clocks = <&clk81>; > + clocks = <&clkc CLKID_CLK81>; > }; -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jerome, On Sun, Jun 4, 2017 at 10:20 PM, Jerome Brunet <jbrunet@baylibre.com> wrote: > On Sun, 2017-06-04 at 20:33 +0200, Martin Blumenstingl wrote: >> This removes the dummy clk81 gate and replaces it with the actual clock >> controller's CLKID_CLK81. This will also allow us to pass the real clock >> IDs to all devices where the clock is controlled by clkc in the future. >> >> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > This is going in the right direction and at least align meson8 and meson8b. > > Acked-by: Jerome Brunet <jbrunet@baylibre.com> that was quick, thanks! > Later on, I'm wondering if some of these clock assignments should be moved to > meson.dtsi ? meson8.dtsi and meson8b.dtsi look very similar actually I think that the Meson6/MX/<however it is called> clock controller is different (based on a quick look). so we may end up with a similar situation that we have on GXBB/GXL/GXM: the clock controller will stay in the corresponding .dtsi and we have to "duplicate" the clock assignments for each SoC however, I guess at some point we can create a .dtsi with all the bits that are shared between Meson8 and Meson8b (during my experiments meson8m2.dtsi just inherits meson8.dtsi and overrides a bunch of compatibles). we can discuss whether we want to move the clock controller to that shared/common .dtsi as well once we start generalizing this >> --- >> arch/arm/boot/dts/meson8.dtsi | 32 ++++++++++++++++---------------- >> 1 file changed, 16 insertions(+), 16 deletions(-) >> >> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi >> index 6993077331c7..9b0b3ddbb17e 100644 >> --- a/arch/arm/boot/dts/meson8.dtsi >> +++ b/arch/arm/boot/dts/meson8.dtsi >> @@ -43,6 +43,7 @@ >> * OTHER DEALINGS IN THE SOFTWARE. >> */ >> >> +#include <dt-bindings/clock/meson8b-clkc.h> >> #include <dt-bindings/gpio/meson8-gpio.h> >> /include/ "meson.dtsi" >> >> @@ -82,13 +83,6 @@ >> reg = <0x203>; >> }; >> }; >> - >> - clk81: clk@0 { >> - #clock-cells = <0>; >> - compatible = "fixed-clock"; >> - clock-frequency = <141666666>; >> - }; >> - >> }; /* end of / */ >> >> &aobus { >> @@ -126,6 +120,12 @@ >> }; >> >> &cbus { >> + clkc: clock-controller@4000 { >> + #clock-cells = <1>; >> + compatible = "amlogic,meson8-clkc"; >> + reg = <0x8000 0x4>, <0x4000 0x460>; >> + }; >> + >> pinctrl_cbus: pinctrl@9880 { >> compatible = "amlogic,meson8-cbus-pinctrl"; >> reg = <0x9880 0x10>; >> @@ -172,20 +172,20 @@ >> }; >> >> ðmac { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> clock-names = "stmmaceth"; >> }; >> >> &i2c_AO { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> }; >> >> &i2c_A { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> }; >> >> &i2c_B { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> }; >> >> &L2 { >> @@ -195,21 +195,21 @@ >> }; >> >> &spifc { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> }; >> >> &uart_AO { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> }; >> >> &uart_A { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> }; >> >> &uart_B { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> }; >> >> &uart_C { >> - clocks = <&clk81>; >> + clocks = <&clkc CLKID_CLK81>; >> }; > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/05/2017 12:13 AM, Martin Blumenstingl wrote: > Hi Jerome, > > On Sun, Jun 4, 2017 at 10:20 PM, Jerome Brunet <jbrunet@baylibre.com> wrote: >> On Sun, 2017-06-04 at 20:33 +0200, Martin Blumenstingl wrote: >>> This removes the dummy clk81 gate and replaces it with the actual clock >>> controller's CLKID_CLK81. This will also allow us to pass the real clock >>> IDs to all devices where the clock is controlled by clkc in the future. >>> >>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> >> >> This is going in the right direction and at least align meson8 and meson8b. >> >> Acked-by: Jerome Brunet <jbrunet@baylibre.com> > that was quick, thanks! > >> Later on, I'm wondering if some of these clock assignments should be moved to >> meson.dtsi ? meson8.dtsi and meson8b.dtsi look very similar > actually I think that the Meson6/MX/<however it is called> clock > controller is different (based on a quick look). > so we may end up with a similar situation that we have on > GXBB/GXL/GXM: the clock controller will stay in the corresponding > .dtsi and we have to "duplicate" the clock assignments for each SoC > > however, I guess at some point we can create a .dtsi with all the bits > that are shared between Meson8 and Meson8b (during my experiments > meson8m2.dtsi just inherits meson8.dtsi and overrides a bunch of > compatibles). we can discuss whether we want to move the clock > controller to that shared/common .dtsi as well once we start > generalizing this Personally I think we should use the same schema as arm64 and leave the clock definitions in the SoCs dtsi files. Neil > >>> --- >>> arch/arm/boot/dts/meson8.dtsi | 32 ++++++++++++++++---------------- >>> 1 file changed, 16 insertions(+), 16 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi >>> index 6993077331c7..9b0b3ddbb17e 100644 >>> --- a/arch/arm/boot/dts/meson8.dtsi >>> +++ b/arch/arm/boot/dts/meson8.dtsi >>> @@ -43,6 +43,7 @@ >>> * OTHER DEALINGS IN THE SOFTWARE. >>> */ >>> >>> +#include <dt-bindings/clock/meson8b-clkc.h> >>> #include <dt-bindings/gpio/meson8-gpio.h> >>> /include/ "meson.dtsi" >>> >>> @@ -82,13 +83,6 @@ >>> reg = <0x203>; >>> }; >>> }; >>> - >>> - clk81: clk@0 { >>> - #clock-cells = <0>; >>> - compatible = "fixed-clock"; >>> - clock-frequency = <141666666>; >>> - }; >>> - >>> }; /* end of / */ >>> >>> &aobus { >>> @@ -126,6 +120,12 @@ >>> }; >>> >>> &cbus { >>> + clkc: clock-controller@4000 { >>> + #clock-cells = <1>; >>> + compatible = "amlogic,meson8-clkc"; >>> + reg = <0x8000 0x4>, <0x4000 0x460>; >>> + }; >>> + >>> pinctrl_cbus: pinctrl@9880 { >>> compatible = "amlogic,meson8-cbus-pinctrl"; >>> reg = <0x9880 0x10>; >>> @@ -172,20 +172,20 @@ >>> }; >>> >>> ðmac { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> clock-names = "stmmaceth"; >>> }; >>> >>> &i2c_AO { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> }; >>> >>> &i2c_A { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> }; >>> >>> &i2c_B { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> }; >>> >>> &L2 { >>> @@ -195,21 +195,21 @@ >>> }; >>> >>> &spifc { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> }; >>> >>> &uart_AO { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> }; >>> >>> &uart_A { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> }; >>> >>> &uart_B { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> }; >>> >>> &uart_C { >>> - clocks = <&clk81>; >>> + clocks = <&clkc CLKID_CLK81>; >>> }; >> -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Jerome Brunet <jbrunet@baylibre.com> writes: > On Sun, 2017-06-04 at 20:33 +0200, Martin Blumenstingl wrote: >> This removes the dummy clk81 gate and replaces it with the actual clock >> controller's CLKID_CLK81. This will also allow us to pass the real clock >> IDs to all devices where the clock is controlled by clkc in the future. >> >> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > This is going in the right direction and at least align meson8 and meson8b. > > Acked-by: Jerome Brunet <jbrunet@baylibre.com> > Applied to v4.13/dt with Jerome's ack. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 6993077331c7..9b0b3ddbb17e 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -43,6 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8-gpio.h> /include/ "meson.dtsi" @@ -82,13 +83,6 @@ reg = <0x203>; }; }; - - clk81: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <141666666>; - }; - }; /* end of / */ &aobus { @@ -126,6 +120,12 @@ }; &cbus { + clkc: clock-controller@4000 { + #clock-cells = <1>; + compatible = "amlogic,meson8-clkc"; + reg = <0x8000 0x4>, <0x4000 0x460>; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -172,20 +172,20 @@ }; ðmac { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; clock-names = "stmmaceth"; }; &i2c_AO { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &i2c_A { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &i2c_B { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &L2 { @@ -195,21 +195,21 @@ }; &spifc { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &uart_AO { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &uart_A { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &uart_B { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; }; &uart_C { - clocks = <&clk81>; + clocks = <&clkc CLKID_CLK81>; };
This removes the dummy clk81 gate and replaces it with the actual clock controller's CLKID_CLK81. This will also allow us to pass the real clock IDs to all devices where the clock is controlled by clkc in the future. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- arch/arm/boot/dts/meson8.dtsi | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)