| Message ID | 20170612124213.14855-6-jlayton@redhat.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Mon, Jun 12, 2017 at 08:42:13AM -0400, Jeff Layton wrote: > Make a new btrfs/999 test that works the way Chris Mason suggested: > > Build a filesystem with 2 devices that stripes the data across > both devices, but mirrors metadata across both. Then, make one > of the devices fail and see how fsync is handled. > > Signed-off-by: Jeff Layton <jlayton@redhat.com> > --- > tests/btrfs/999 | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Missing btrfs/999.out file > tests/btrfs/group | 1 + > 2 files changed, 94 insertions(+) > create mode 100755 tests/btrfs/999 > > diff --git a/tests/btrfs/999 b/tests/btrfs/999 > new file mode 100755 > index 000000000000..84031cc0d913 > --- /dev/null > +++ b/tests/btrfs/999 > @@ -0,0 +1,93 @@ > +#! /bin/bash > +# FS QA Test No. 999 > +# > +# Open a file several times, write to it, fsync on all fds and make sure that > +# they all return 0. Change the device to start throwing errors. Write again > +# on all fds and fsync on all fds. Ensure that we get errors on all of them. > +# Then fsync on all one last time and verify that all return 0. > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2017, Jeff Layton <jlayton@redhat.com> > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -rf $tmp.* $testdir > + _dmerror_cleanup > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > +. ./common/dmerror > + > +# real QA test starts here > +_supported_os Linux > +_require_dm_target error > +_require_test_program fsync-err > +_require_test_program dmerror > + > +# bring up dmerror device > +_scratch_unmount > +_dmerror_init > + > +# Replace first device with error-test device > +old_SCRATCH_DEV=$SCRATCH_DEV > +SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | perl -pe "s#$SCRATCH_DEV#$DMERROR_DEV#"` > +SCRATCH_DEV=$DMERROR_DEV > + > +_require_scratch > +_require_scratch_dev_pool Need "_require_scratch_dev_pool_equal_size" too, since test creates raid1 profile for metadata. Thanks, Eryu > + > +rm -f $seqres.full > + > +echo "Format and mount" > + > +_scratch_pool_mkfs "-d raid0 -m raid1" > $seqres.full 2>&1 > +_scratch_mount > + > +# How much do we need to write? We need to hit all of the stripes. btrfs uses > +# a fixed 64k stripesize, so write enough to hit each one > +number_of_devices=`echo $SCRATCH_DEV_POOL | wc -w` > +write_kb=$(($number_of_devices * 64)) > +_require_fs_space $SCRATCH_MNT $write_kb > + > +testfile=$SCRATCH_MNT/fsync-err-test > + > +SCRATCH_DEV=$old_SCRATCH_DEV > +$here/src/fsync-err -b $(($write_kb * 1024)) -d $here/src/dmerror $testfile > + > +# success, all done > +_dmerror_load_working_table > + > +# fs may be corrupt after this -- attempt to repair it > +_repair_scratch_fs >> $seqres.full > + > +# remove dmerror device > +_dmerror_cleanup > + > +status=0 > +exit > diff --git a/tests/btrfs/group b/tests/btrfs/group > index 6f19619e877c..8dbdfbfe29fd 100644 > --- a/tests/btrfs/group > +++ b/tests/btrfs/group > @@ -145,3 +145,4 @@ > 141 auto quick > 142 auto quick > 143 auto quick > +999 auto quick > -- > 2.13.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-xfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2017-06-13 at 16:40 +0800, Eryu Guan wrote: > On Mon, Jun 12, 2017 at 08:42:13AM -0400, Jeff Layton wrote: > > Make a new btrfs/999 test that works the way Chris Mason suggested: > > > > Build a filesystem with 2 devices that stripes the data across > > both devices, but mirrors metadata across both. Then, make one > > of the devices fail and see how fsync is handled. > > > > Signed-off-by: Jeff Layton <jlayton@redhat.com> > > --- > > tests/btrfs/999 | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > Missing btrfs/999.out file > > > tests/btrfs/group | 1 + > > 2 files changed, 94 insertions(+) > > create mode 100755 tests/btrfs/999 > > > > diff --git a/tests/btrfs/999 b/tests/btrfs/999 > > new file mode 100755 > > index 000000000000..84031cc0d913 > > --- /dev/null > > +++ b/tests/btrfs/999 > > @@ -0,0 +1,93 @@ > > +#! /bin/bash > > +# FS QA Test No. 999 > > +# > > +# Open a file several times, write to it, fsync on all fds and make sure that > > +# they all return 0. Change the device to start throwing errors. Write again > > +# on all fds and fsync on all fds. Ensure that we get errors on all of them. > > +# Then fsync on all one last time and verify that all return 0. > > +# > > +#----------------------------------------------------------------------- > > +# Copyright (c) 2017, Jeff Layton <jlayton@redhat.com> > > +# > > +# This program is free software; you can redistribute it and/or > > +# modify it under the terms of the GNU General Public License as > > +# published by the Free Software Foundation. > > +# > > +# This program is distributed in the hope that it would be useful, > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > +# GNU General Public License for more details. > > +# > > +# You should have received a copy of the GNU General Public License > > +# along with this program; if not, write the Free Software Foundation, > > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > > +#----------------------------------------------------------------------- > > + > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -rf $tmp.* $testdir > > + _dmerror_cleanup > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/filter > > +. ./common/dmerror > > + > > +# real QA test starts here > > +_supported_os Linux > > +_require_dm_target error > > +_require_test_program fsync-err > > +_require_test_program dmerror > > + > > +# bring up dmerror device > > +_scratch_unmount > > +_dmerror_init > > + > > +# Replace first device with error-test device > > +old_SCRATCH_DEV=$SCRATCH_DEV > > +SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | perl -pe "s#$SCRATCH_DEV#$DMERROR_DEV#"` > > +SCRATCH_DEV=$DMERROR_DEV > > + > > +_require_scratch > > +_require_scratch_dev_pool > > Need "_require_scratch_dev_pool_equal_size" too, since test creates > raid1 profile for metadata. > > Thanks, > Eryu > Is this really needed? I've been running this test on btrfs with devices that are not of equal size, and it seems to work just fine. The test doesn't write a lot of data (just a few megs at most), so I don't think we'll run out of space unless you have some really small devices in there. > > + > > +rm -f $seqres.full > > + > > +echo "Format and mount" > > + > > +_scratch_pool_mkfs "-d raid0 -m raid1" > $seqres.full 2>&1 > > +_scratch_mount > > + > > +# How much do we need to write? We need to hit all of the stripes. btrfs uses > > +# a fixed 64k stripesize, so write enough to hit each one > > +number_of_devices=`echo $SCRATCH_DEV_POOL | wc -w` > > +write_kb=$(($number_of_devices * 64)) > > +_require_fs_space $SCRATCH_MNT $write_kb > > + > > +testfile=$SCRATCH_MNT/fsync-err-test > > + > > +SCRATCH_DEV=$old_SCRATCH_DEV > > +$here/src/fsync-err -b $(($write_kb * 1024)) -d $here/src/dmerror $testfile > > + > > +# success, all done > > +_dmerror_load_working_table > > + > > +# fs may be corrupt after this -- attempt to repair it > > +_repair_scratch_fs >> $seqres.full > > + > > +# remove dmerror device > > +_dmerror_cleanup > > + > > +status=0 > > +exit > > diff --git a/tests/btrfs/group b/tests/btrfs/group > > index 6f19619e877c..8dbdfbfe29fd 100644 > > --- a/tests/btrfs/group > > +++ b/tests/btrfs/group > > @@ -145,3 +145,4 @@ > > 141 auto quick > > 142 auto quick > > 143 auto quick > > +999 auto quick > > -- > > 2.13.0 > >
On Wed, Jun 14, 2017 at 07:55:17AM -0400, Jeff Layton wrote: > On Tue, 2017-06-13 at 16:40 +0800, Eryu Guan wrote: > > On Mon, Jun 12, 2017 at 08:42:13AM -0400, Jeff Layton wrote: > > > Make a new btrfs/999 test that works the way Chris Mason suggested: > > > > > > Build a filesystem with 2 devices that stripes the data across > > > both devices, but mirrors metadata across both. Then, make one > > > of the devices fail and see how fsync is handled. > > > > > > Signed-off-by: Jeff Layton <jlayton@redhat.com> > > > --- > > > tests/btrfs/999 | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > Missing btrfs/999.out file > > > > > tests/btrfs/group | 1 + > > > 2 files changed, 94 insertions(+) > > > create mode 100755 tests/btrfs/999 > > > > > > diff --git a/tests/btrfs/999 b/tests/btrfs/999 > > > new file mode 100755 > > > index 000000000000..84031cc0d913 > > > --- /dev/null > > > +++ b/tests/btrfs/999 > > > @@ -0,0 +1,93 @@ > > > +#! /bin/bash > > > +# FS QA Test No. 999 > > > +# > > > +# Open a file several times, write to it, fsync on all fds and make sure that > > > +# they all return 0. Change the device to start throwing errors. Write again > > > +# on all fds and fsync on all fds. Ensure that we get errors on all of them. > > > +# Then fsync on all one last time and verify that all return 0. > > > +# > > > +#----------------------------------------------------------------------- > > > +# Copyright (c) 2017, Jeff Layton <jlayton@redhat.com> > > > +# > > > +# This program is free software; you can redistribute it and/or > > > +# modify it under the terms of the GNU General Public License as > > > +# published by the Free Software Foundation. > > > +# > > > +# This program is distributed in the hope that it would be useful, > > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > > +# GNU General Public License for more details. > > > +# > > > +# You should have received a copy of the GNU General Public License > > > +# along with this program; if not, write the Free Software Foundation, > > > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > > > +#----------------------------------------------------------------------- > > > + > > > +seq=`basename $0` > > > +seqres=$RESULT_DIR/$seq > > > +echo "QA output created by $seq" > > > + > > > +here=`pwd` > > > +tmp=/tmp/$$ > > > +status=1 # failure is the default! > > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > > + > > > +_cleanup() > > > +{ > > > + cd / > > > + rm -rf $tmp.* $testdir > > > + _dmerror_cleanup > > > +} > > > + > > > +# get standard environment, filters and checks > > > +. ./common/rc > > > +. ./common/filter > > > +. ./common/dmerror > > > + > > > +# real QA test starts here > > > +_supported_os Linux > > > +_require_dm_target error > > > +_require_test_program fsync-err > > > +_require_test_program dmerror > > > + > > > +# bring up dmerror device > > > +_scratch_unmount > > > +_dmerror_init > > > + > > > +# Replace first device with error-test device > > > +old_SCRATCH_DEV=$SCRATCH_DEV > > > +SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | perl -pe "s#$SCRATCH_DEV#$DMERROR_DEV#"` > > > +SCRATCH_DEV=$DMERROR_DEV > > > + > > > +_require_scratch > > > +_require_scratch_dev_pool > > > > Need "_require_scratch_dev_pool_equal_size" too, since test creates > > raid1 profile for metadata. Sorry, it's not needed here. I got confused with device replace operation, only "replace" needs this require rule. Thanks for confirming! Eryu -- To unsubscribe from this list: send the line "unsubscribe linux-xfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/btrfs/999 b/tests/btrfs/999 new file mode 100755 index 000000000000..84031cc0d913 --- /dev/null +++ b/tests/btrfs/999 @@ -0,0 +1,93 @@ +#! /bin/bash +# FS QA Test No. 999 +# +# Open a file several times, write to it, fsync on all fds and make sure that +# they all return 0. Change the device to start throwing errors. Write again +# on all fds and fsync on all fds. Ensure that we get errors on all of them. +# Then fsync on all one last time and verify that all return 0. +# +#----------------------------------------------------------------------- +# Copyright (c) 2017, Jeff Layton <jlayton@redhat.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $testdir + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_dm_target error +_require_test_program fsync-err +_require_test_program dmerror + +# bring up dmerror device +_scratch_unmount +_dmerror_init + +# Replace first device with error-test device +old_SCRATCH_DEV=$SCRATCH_DEV +SCRATCH_DEV_POOL=`echo $SCRATCH_DEV_POOL | perl -pe "s#$SCRATCH_DEV#$DMERROR_DEV#"` +SCRATCH_DEV=$DMERROR_DEV + +_require_scratch +_require_scratch_dev_pool + +rm -f $seqres.full + +echo "Format and mount" + +_scratch_pool_mkfs "-d raid0 -m raid1" > $seqres.full 2>&1 +_scratch_mount + +# How much do we need to write? We need to hit all of the stripes. btrfs uses +# a fixed 64k stripesize, so write enough to hit each one +number_of_devices=`echo $SCRATCH_DEV_POOL | wc -w` +write_kb=$(($number_of_devices * 64)) +_require_fs_space $SCRATCH_MNT $write_kb + +testfile=$SCRATCH_MNT/fsync-err-test + +SCRATCH_DEV=$old_SCRATCH_DEV +$here/src/fsync-err -b $(($write_kb * 1024)) -d $here/src/dmerror $testfile + +# success, all done +_dmerror_load_working_table + +# fs may be corrupt after this -- attempt to repair it +_repair_scratch_fs >> $seqres.full + +# remove dmerror device +_dmerror_cleanup + +status=0 +exit diff --git a/tests/btrfs/group b/tests/btrfs/group index 6f19619e877c..8dbdfbfe29fd 100644 --- a/tests/btrfs/group +++ b/tests/btrfs/group @@ -145,3 +145,4 @@ 141 auto quick 142 auto quick 143 auto quick +999 auto quick
Make a new btrfs/999 test that works the way Chris Mason suggested: Build a filesystem with 2 devices that stripes the data across both devices, but mirrors metadata across both. Then, make one of the devices fail and see how fsync is handled. Signed-off-by: Jeff Layton <jlayton@redhat.com> --- tests/btrfs/999 | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/group | 1 + 2 files changed, 94 insertions(+) create mode 100755 tests/btrfs/999